Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Csln S Ajmrxznempjrb Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: excellent (used), Year of construction: 2020, Edge bander Manufacturer: Felder Type: G360-4 Year of manufacture: 2020 Operating hours: approx. 439 h Csln S Amov A U Upjperb Edge thickness: 0.4 -3 mm Workpiece thickness: 10 - 45 mm Feed: 8 m/min Total output: 5.5 kW Total length: approx. 3,200 mm Joining unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Surface scraper: Yes

Condition: used, Year of construction: 2008, Working dimension X: 1.250 mm Working dimension Y: 800 mm Working dimension Z: 60 mm Number of separate aggregates: 1 CNC-axes: 1 Croln S Ajud Hmbompjb Horizontal drills in Y: 1 Dowel insertion: Yes Glue system: Yes Dowel insertion aggregates: 1 Dowel diameter: 8 mm Dowel length max: 35 mm Stationary machine: Yes Alternate loading: Yes Clamping system: Pneumatic clamping Safety device: enclosed fence Barcode reader: Yes Barcode control: Yes UPS - Uninterruptible Power Supply: Yes Control: HOMAG POWER CONTROL PC 85T Software: HOMAG WOODWOP 5.0 Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 6 kW

Condition: good (used), Veneer saw, veneer saw, joint cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with suction Crelnsb A Hnhs S Ampsb

Condition: used, Year of construction: 1991, Table dimensions 1200 x 730 mm Motor output 4 kW Spindle length 180 mm table height 920 mm spindle stroke 260 mm Weight 580 kg Celn S Ajwbi H Aemperb Spindle speed 3000/4500/6000/7000/10000 rpm Max. table protrusion: 230 mm Max. dimensions of the tools that can be lowered under the table: 320 x 90 mm

Condition: used, Motor power: 4.0 PS/HP (3.0 kW), Planer block: 2-field system planer knives, Year of manufacture: 1992, Planing width: 410 mm, Thickness height: 4220 mm, Milling spindle Ø: 30 mm, Accessories: with feed device, Max. chip removal: 5 mm, Cast iron planing tables height adjustable and foldable, Planing guard 410 mm, Planer stop pivoting 90 45 degrees, Thickness planing width 410 mm, Circular saw D30 mm pivoting, Parallel cutting scale, Finely adjustable milling stop, Outrigger table, Max. cutting length 1750 mm, Drill chuck 016 mm, Drill support Crslswhb Tuen S Ampsb

Condition: used, Used machine Condition: age-appropriate Technical data: Table size 2600 x 900 mm Max. usable sanding length 2500 mm Creljv Aqx Den S Ampob Belt length 7100 mm x 150 mm 1100 mm offset right Availability: short term Location: Solingen

Condition: used, Input capacity 400mm/200mm Hedgehog trainer almost new entry Knives Crslnswbzcvo S Ampob 37kw-50hp engine Control cabinet

Condition: used, machine/vehicle number: 005989, Position 1: Spiral Wrappers KUPER-KFE-TANDEM 3 1600 Position 2: Shrink-Wrap Ovens KUPER-KFE-TANDEM 3 1600 Celnek Dvhwo S Amporb

Condition: used, Ganner Selekta 252 TR dowel insertion machine for automatically gluing and driving round dowels into prepared holes. The machine is ideal for efficient dowel joints in furniture and cabinet construction and offers high repeatability in series production. Dowel diameter: 8 mm Dowel length: 20–50 mm Csln Sjwd Iius Ampsrb

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Saw and split wood automatically with the RM480-B from H&R. The H&R RM480-B wood splitter is the ideal tool for your firewood processing. The new 2025 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and transporting of firewood. Coln S Amou Dnrujpsrb The innovative design and powerful hydraulic system make working with this splitter significantly easier – ideal for professional forestry companies and ambitious DIY enthusiasts. Unlike the competition, the H&R RM480 has all functions hydraulically operated, making work faster and easier. Product Features RM480-B Performance: The splitter is equipped with a powerful 15 HP gasoline engine (RM 480 B-T20). Alternatively, it is available with a 10 HP electric motor (RM 480 E-T20). Log length and diameter: Logs up to 3 meters long can be safely placed on the sturdy standard table. The splitter handles logs with a diameter of up to 48 cm and cuts them into lengths of up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar with individually adjustable pressure and sawing speed. The hydraulic log clamp ensures the wood is securely held in place during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the included 4- and 6-way splitting cross – for flexible splitting patterns and individual adjustment to your needs. Conveyor belt: The 1.8 m infeed belt facilitates log feeding, while the pivoting discharge belt makes removing the split wood child's play. Mobile use: The automatic log splitter weighs only 550 kg with a trailer and can be easily moved by hand thanks to its practical transport frame. Easy operation: All functions can be conveniently operated hydraulically, allowing for long operating times. At a glance • Sawing, splitting, and removal in a single step • All functions are hydraulically operated • Efficient and powerful motor • Logs up to 48 cm in diameter and 60 cm in length can be split • Logs up to 3 m long can be processed (with accessories even up to 6 m!) Price Gasoline engine (15 HP) RM 480 B-T20 (net) €7,385.71 Electric motor (10 HP) RM 480 E-T20 (net) €7,478.99 Additional options With the optional lifting table or a chain conveyor, logs up to 6 meters in length can be easily processed. Technical Details Weight (including trailer): 550 kg Freight costs: €300 (transport in an iron frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter: 48 cm Max. log length: approx. 60 cm Max. log length: 300 cm Engine: 15 HP gasoline Displacement: 420 cc Engine oil: 10W30 Hydraulic oil: 46 The hydraulic connections and control levers are pre-installed, so the machine is ready for operation in no time. Benefit from the powerful and sophisticated technology of the H&R RM 480 wood splitter. Order today and make firewood processing more efficient, safer, and more convenient!

Condition: excellent (used), Year of construction: 2022, The Hebrock K 36 top-of-the-line machine with motorized adjustment - top condition - - Available at the end of May - This Hebrock long-time favorite offers unimagined possibilities. Developed to meet the highest demands, the K 36 stands for absolute reliability and productivity in daily use. By equipping the machine with a stepped cutter and a multi-radius scraper, Hebrock sets new standards in perfect edge processing of a wide variety of edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 minutes Max. edge thickness: 3 mm Min/Max. Workpiece thickness 8 – 60 mm Min. workpiece length approx. 140 mm Ready for operation approx. 6 min. Max. power consumption Ø approx. 7.4 kW Electrical connection 400 V – 3 Ph – 50 Hz Worktable height approx. 900 mm Machine dimensions approx. 5250 x 1230 x 1430 mm (LxWxH) Weight 1750 kg Equipment: Hebrock K 36. K36 Edge Banding Machine With PLC control (touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; Jointing machine (including diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue pot with interchangeable pot preparation including glue outlet device, HF dual-motor mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment and interchangeable insert cutter (combination version), corner rounding machine, radius scraper, flat scraper (including pneumatic lifting device), trimming station, robust chain drive, ball-bearing double roller top pressure, unit viewing window on the rear and operator side of the machine, signal lamp for workpiece sequence, extendable workpiece support, gluing up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner milling 36/08/2/1 additional Interchangeable Motor Corner Milling Machine R=1 Cslnewb Umns S Amporb 36/09/1 Multi-Radius Scraper 36/24/1 Release Agent Spray Device 36/24/2 Cleaning Agent Spray Device 36/25 Edge Protection Spray 36/27 Nesting (1 milling station + 1 radius scraper) 36/30 Pneumatic 3-Point Adjustment 36/30/1 Multi-Tool for HF Milling Station (R2/R1/Chamfer) 36/45 Axis Package Motorized Adjustment for Panel Edge Thickness and Joint Milling Depth Location: From stock, 54634 Bitburg - Available at the end of May -

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Automatic horizontal and vertical positioning for absolute and chain dimensions Csln S Amou Dru Tspjrb Digital display for horizontal cutting PLC control with 2-line display and plain text display for processing mode and error diagnosis infinitely variable feed rate up to 24 m/min automatic workpiece end detection Calculator function in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm max. trimming height 2100 mm max. scoring height, vertical 2100 mm max. cutting depth 80 mm Motor 5.5 kW Saw blade speed 4500 rpm Saw blade diameter 300 mm Air requirement 1200 m³/h Air speed 20 m/s static negative pressure 1200 Pa Extraction connection: 2 x 120 mm Dimensions L x W x H 5620 (plus extraction nozzle) x 1480 x 2948 mm Room height 2990 mm Compressed air connection: 6 bar Air consumption 50 NL/min Electrical connection value: 5.7 kW With Supercut scoring device With pneumatically pivoting saw unit With longitudinal stop for lower workpiece support With folding rail, short, complete Availability: by arrangement Location: Solingen

Condition: good (used), Cutting area approx. 5200 x 2100 mm Manual feed Automatic deflection grate Cutting depth 70/80 mm Further technical data available upon request Crjlnswduams S Ampsb

Condition: used, machine/vehicle number: 007766, Position 1: Roller Conveyors BURKLE + HEESEMANN-. Position 2: Brushing Machines BURKLE + HEESEMANN-. Position 3: Roller Conveyors BURKLE + HEESEMANN-. Position 4: Roller Spreaders BURKLE + HEESEMANN-. Position 5: Roller Spreaders BURKLE + HEESEMANN-. Position 6: Ovens BURKLE + HEESEMANN-. Position 7: Roller Spreaders BURKLE + HEESEMANN-. Position 8: Roller Spreaders BURKLE + HEESEMANN-. Position 9: Ovens BURKLE + HEESEMANN-. Position 10: Roller Conveyors BURKLE + HEESEMANN-. Crjlev Akwmen S Ampeb

Condition: good (used), Various suction collectors, suction distributors Cslnetp Hpbs S Amporb several available, see photos for details Extraction bell B, C: 140 euros each The parts can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 550 kg, type of motor: electric motor, cutting length (max.): 600 mm, Saw and split wood automatically with the RM480-E from H&R. The H&R RM480-E wood splitter is the ideal tool for your firewood processing needs. The new 2025 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and transporting of firewood. The innovative design and powerful hydraulic system make working with this splitter significantly easier – ideal for professional forestry companies and ambitious DIY enthusiasts. Unlike the competition, all functions of the H&R RM480 are hydraulically operated, making work faster and easier. Product Features of the RM480-E Firewood Splitter Performance: The splitter is equipped with a powerful 10 HP electric motor. Alternatively, it is available with a 15 HP gasoline engine (RM 480 B-T20). Log length and diameter: Logs up to 3 meters long can be safely placed on the sturdy standard table. The splitter can handle logs with a diameter of up to 48 cm and cut them into lengths of up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar with individually adjustable pressure and sawing speed. The hydraulic log clamp ensures secure wood hold during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the included 4- and 6-way splitting cross – for flexible splitting patterns and individual adjustment to your needs. Conveyor belt: The 1.8 m feed belt makes it easy to feed the logs, while the pivoting discharge belt makes removing the split wood child's play. Mobile use: The automatic log splitter weighs only 550 kg with a trailer and can be easily moved by hand thanks to its practical transport frame. Easy operation: All functions can be conveniently operated hydraulically, allowing even long periods of use. At a Glance • Sawing, splitting, and removal in a single step • All functions hydraulically operated • Efficient and powerful motor • Logs up to 48 cm in diameter and 60 cm in length can be split • Logs up to 3 m long can be split (with accessories even up to 6 m!) Price Electric motor (10 HP) RM 480 E-T20 (net) €7,478.99 Gasoline engine (15 HP) RM 480 B-T20 (net) €7,385.71 Additional Options With the optional lifting table or a chain conveyor, logs up to 6 meters in length can be easily processed. Technical Details Weight (including trailer): 550 kg Freight costs: €300 (transport in iron frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter: 48 cm Max. log length: approx. 60 cm Max. log length: 300 cm Motor: 10 HP electric Hydraulic oil: 46 The hydraulic connections and control levers are pre-installed, so the machine is ready for operation in no time. Crjlnju Dkufo S Ampjb Benefit from the powerful and sophisticated technology of the H&R RM 480 wood splitter. Order today and make firewood processing more efficient, safer, and more convenient!

Condition: used, Model making machines Including over 100 canvas belts Including 11 profile sanding rods Used, excellent condition, little used Make: Zimmermann Crjln S Amjwhqxaepsb Type: PS 1 Extraction connection diameter 80 mm Space requirement approx. 1000 mm x 600 mm x 1800 mm Weight approx. 400 kg Storage location: 97447 Gerolzhofen, free on freight, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: good (used), Year of construction: 2002, Robust swivel milling machine T 26, swivels from -45 to +45 degrees with 2-axis positioning control Duocontrol Swivel milling machine with very good equipment A treat for every Martin fan Cslnevv H T Re S Amperb Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L running Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is shown in the upper display, which is then set at the stop, so settings can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel-fix quick-change spindle with torque wrench Electrically adjustable stop, inlet jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of the height and stop Stop can be swiveled away with lifting device (for curved milling work) Table opening via eccentric table rings, electrically adjustable Table extension right and left with extendable workpiece support Support can be extended by 700mm Table length approx. 2400mm Foldable stop for insert milling Original Martin aluminum stop jaws with two bars Workpiece pressure device Aigner Centrex 3-roller feed HolzHer 1117, with 8 speeds, R/L running, new rollers Feed socket, can be switched from the control system Extraction nozzle 2 x 120mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been repainted Approx. 7400 operating hours Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are in our warehouse ready for demonstration, see "other offers from this provider".

Condition: used, Year of construction: 1986, From a model shop Used, excellent condition, little used Make: Panhans Type 325 Year of manufacture: 1986 GS-tested Motor: 4.0 kW Top control panel Planing width: approx. 510 mm Celnswhqw Nj S Amporb Infeed table length: approx. 1600 mm Removal table length: approx. 1150 mm Auxiliary stop Slotted/low-noise table lips Number of knives: 4 Blade system: Strip planer knives Chip thickness indicator Hollow-pointed joint Automatic brake Hollow-pointed joint adjustment Extraction connection: 140 mm diameter Space required: approx. 2800 mm x 800 mm x 1200 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: like new (used), Lot 29 Band saw blades for band saws, e.g. Zimmermann BZU 800 model building band saw dimensions approx. 6130mm long, various widths from 8 - 20mm Condition see photos, obviously all saw blades are still sharp Sale only as a bundle, not individually. Price is for all 29 blades. The parts can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier". supplier". Coln S Amst I Ezaopjrb

Condition: used, Year of construction: 1986, From a model workshop Used, excellent condition, little used Make: Panhans Type 426 Year of manufacture: 1986 Machine No. 670 GS-tested Powered motor: 7.5 kW Planing width: approx. 630 mm Planing height: approx. 250 mm Adjustable table guide rollers Linked pressure beam Steel feed roller Feed rate: 7-14 m/min Number of knives: 4 Creln Sewhqw As Ampjb Knife system: Strip planer knives Digital display for planing height Electric height adjustment with handwheel fine adjustment Extraction connection diameter: 160 mm Space required: approx. 1200 mm x 1000 mm x 1400 mm Weight: approx. 1150 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Year of construction: 2021, Condition: like new (used), Protective cover for milling curved parts on the ring etc. This protective device is often recommended by the BG. Maximum cutter diameter 160mm Crolet Ixhgjn S Ampjb With thrust ring, brushes and brake wedge for the thrust bearing Has obviously not been used very often. The machine can be demonstrated on site by appointment. We only offer only machines that are ready for demonstration in our warehouse, see "other offers from this supplier". offerer".

Condition: excellent (used), Protective cover for milling curved parts on the ring etc. This protective device is often recommended by the BG. Maximum cutter diameter 160mm With thrust ring, brushes and brake wedge for the thrust bearing Crelnjt Ixike S Ampeb Has obviously not been used very often. Year of manufacture unknown The machine can be demonstrated on site by appointment. We only offer only offer machines that are ready for demonstration in our warehouse, see "other offers from this offerer".

Condition: excellent (used), Year of construction: 2007, Robust swivel milling machine swivels from -45 to +45 degrees Tiltable milling machine with very good equipment A treat for every Hofmann fan Complete 3-axis positioning control for spindle height, spindle tilt and stop. Programs can be saved All three axes can be positioned. Adjustment of the single jaw with SIKU counter Swivel control panel at eye level for control Manual movement of each axis and positioning to the set target value Pole-changing drive motor 4.7 / 6.3 kW with automatic motor brake R/L run Swivel angle electrically adjustable from - 45 to + 45 degrees Height adjustment max. 125mm, electrically adjustable Six speeds 3000, 4000, 5000, 6000, 8000 and 10,000 rpm Spindle diameter 30mm Fence is adjusted electrically Electric spindle lock for tool change Table with table slide instead of table rings Planed machine table 2750mm long Extendable workpiece support at the front Cast fence jaws Aigner Centrex workpiece pressure device 4-roller feed Holzkraft, with 8 speeds, R/L run, new rollers Feed socket, switchable from the control unit Extraction socket 2 x 120mm Compressed air connection 6bar 2 emergency stop switches Original paint, partially repaired Operating instructions CE mark Celn Sovbrygo Ampjrb Dimensions approx. 2800 x 1350 x 1900mm (LxWxH). Weight approx. 1300kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".