Condition: ready for operation (used), Wide planer Constant table Maximum planing width: 605 mm Planing height (2 sides): 200 mm Cjbvhq Uewg S Tvo Torb Planing height (4 sides): 170 mm Planer blocks with 6 knives

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Condition: Good Equipment and technical data: Maximum equipment for the professional, optionally with Tersa or spiral cutter block With TERSA cutter block for rapid blade changes TERSA cutter block system enables particularly quiet operation Helix-toothed steel feed roller for constant and even material feed Material feed with two speeds via separate motor The extra-long planing tables enable easy and precise planing of workpieces Work tables are made of gray cast iron, post-annealed and stress-free, thus robust and permanently flat Planing tables open simultaneously to the rear for short setup times Planer thickness table adjustment via handwheel with numerical display for planing height The heavy machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/gray cast iron construction Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller (ideal for economical planing of fine wood) Quality - Made in Europe Features: Tersa planer cutter block No more adjustments or screwing Planer cutters change in seconds Self-locking Extremely quiet operation Material feed Helix-toothed steel feed rollers for constant and even wood feed without marks Multiple teeth engage simultaneously for powerful feed Wear-free unlike rubber feed rollers Permanently mounted extraction hood Thanks to the permanently mounted extraction hood, reconnecting the extraction hose is no longer necessary during conversion. This saves valuable working time Simultaneous opening of the planing tables Simultaneous folding of the planing tables with tension spring support for quick and convenient conversion to thicknessing in seconds Thicknessing table adjustment FS 41 elite s with thicknessing table adjustment via handwheel with integrated display The thicknessing table is mounted on four large spindles, ensuring maximum stability under all working conditions. Thanks to the special lifting device, the table position is maintained perfectly even without locking. Kickback guards Solid kickback guards prevent workpieces from kicking back. The 4-knife cutter block ensures an optimal planing finish. Anodized aluminum planer fence Large dimensions (1200 x 150 mm) Easy to move Tilt from 90° to 45° via scale Standard with auxiliary fence for safe planing, even of narrow workpieces. Scope of delivery: Planer and jointer fence with round bar guide 2 feed speeds Tersa cutter block Technical specifications Cobewbay Hevhq U Tjrb Planer total table length: 2200 mm Planer length of feed table Planer table height Planer working width: 410 mm Planer chip removal: max. 5 mm Planer fence dimensions: 1200 x 150 mm Planer fence pivoting range Thickness table dimensions: 775 x 410 mm Thickness working height: min. 3 mm mm Maximum working height: 240 mm Min. working length: Feed speed: 6 / 12 m/min Planer block speed: 5000 rpm Planer block diameter: 95 mm Number of planer knives: 4 Electrical connection: 400 V / 50 Hz Motor power: 5.0 kW Dimensions

Condition: excellent (used), HW adjusting nut Crobvhq Uswcznhj Tjb 160x4-7.5x309 mm Z4 + v4, - MAN Insertion depth! 35 mm.- Unused

Condition: new, Year of construction: 2025, operating hours: 8 h, Machine in pre production *planned to be ready appr. end of may 2025 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Crobvhqsxfwdo U Teb Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, rapid traverse Y-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 15 m/min, workpiece length (max.): 3,200 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 200 mm, workpiece weight (max.): 1,500 kg, Equipment: rotational speed infinitely variable, At Danmar Machines, we never stand still. We continue to lead the CNC world by simply doing what we love most: innovating, being reliable and ensuring that our customers are satisfied. We are always working on improving and trying to exceed expectations every time. Our team of technicians and designers is constantly working on coming up with smart, precise and powerful solutions. No challenge is the same, and we understand that all too well. That is why we think along with you and ensure customization that fits your situation exactly. compact- high precision machining center ( 0.01) Transport> Installation> CadCam software > starter kit cutting tools. Dimensions working area  1300 x 2600mm € 28,500,-  1600 x 3200mm € 31,500,-  2100 x 3200mm € 34,900, BudgeCraft CNC milling machines are assembled in the Netherlands according to the machine guidelines EG2023 EURPE CE-Norm. CE-Marking PILZ the spirit of safety Work table: The heavy chassis is a statically and dynamically welded construction, which is produced from stabilized steel. The solid construction ensures stability and high precision Portal: Portal construction high precision by means of Qantry drive accurate, - requires little maintenance. Qantry's linear guides that are driven on both sides meet the highest requirements in terms of precision and dynamics. Rack and pinion in X and Y axes guarantee high-precision movement. fast acceleration> deaccelerations, fast tool change. Milling motor ATC Spindle: Inverted controlled milling motor. 3 – 4 axes controlled 24,000 rpm. double linear high-precision guides guarantee utmost accuracy. The 2nd Z-axis is positioned by the ball screw spindle, this enables 3D and relief machining. Tools are automatically clamped. Drive: Brush pink servo motors: These motors enable accelerations and very high speeds. The use of these motors reduces maintenance thanks to the digital control and feedback. In addition, they ensure precision and a better finish during machining. Lubrication: To prevent lubrication problems during, this machine is equipped with a centralized automatic lubrication system Linear tool magazine: 10-12-16 position tool changer, automatic change during machining. Reference stops: less cutting loss, fast and efficient positioning with the stop cylinders on the front. Automatic measuring system for tooling: Work table and vacuum zones: Nesting CNC machining centre. Perfect nesting with the matrix vacuum table. With the well-thought-out grid geometry it is possible to vacuum clamp all formats and shapes. Reference stops can be mounted directly on the table in consultation. Vacuum zones can be easily selected on the sheet size, for carefree and safe material processing. Milling spindle protection cover: An important safety device that protects the motor from external objects and particles. CNC/NORM EG2023-EUROPE security: X-axis working area: 2600-3200mm Y-axis working area: 1300-1600-2100mm Z-axis stroke: 200mm Construction quantity: Yes Crjbvhjwc Uadeq U Tsb Milling motor: 9Kw Servomotor (ATC spindle) Speed: 1,000-24,000 RPM X-axis travel: 50m/min Y-axis travel: 50m/min Z-axis travel: 15m/min tapping: ISO30-ER32-ER40 Software: Pegasus PWoodEntry Vacuum pump: included

Condition: used, Bäuerle Type 201 tilting spindle router for profiling and milling wood with electric height and tilt adjustment, as well as an Aigner integral stop and feed unit. table width: 2.000 mm Crebvewdrvxshq U Tob Direction of rotation: Left Right Spindle ø: 30 mm clamping length: about 120 mm number of revolutions: 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm

Condition: used, Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 0-200-10-2728, For sale is a Homag KL 79 edge banding machine from 2010 in very good, fully operational condition. The machine offers comprehensive features for demanding edge processing and is ready for immediate use in production. Features at a glance: • Two gluing units for maximum flexibility in edge processing Crobewhggmevhq U Tsb • Axis-controlled profile milling for precise and reproducible results • Multi-scraper for perfect edge processing • Axis-controlled corner rounding unit – ideal for complex workpiece geometries • Flat scraper and buffing unit for perfect surface quality • Pivoting jointing unit, suitable for large tool diameters up to 150 mm • Feeder for overhead parts, guarantees right angles during processing Additionally available (not included in the price): • PUR pre-melter for processing PUR adhesive • Recirculation system, ideal for increasing productivity in series production Condition: The machine is in good condition, has been regularly serviced, and is currently in operation – a viewing during operation is possible by arrangement. Important: Only the edge bander is for sale for the stated price.

Condition: used, Bäuerle rigid milling machine with feeder External dimensions approx. L x W x H 1150 x 1200 x 1100 mm Technical specifications available upon request Crebvhq Uswf U Dhj Tsb

Condition: excellent (used), Profile plate flattening cutter 220x31x30 mm, 2 teeth + 2 teeth, M31, 1 Unused Csbswczm Rsvhq U Tjrb

Condition: new, Year of construction: 2024, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Cjbvhed Nm Sioq U Terb Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: good (used), Code: 0110 Brand: OMS SALVARANI Model: FC 350 R - CE Standard Crjbvhqswhffze U Tob Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 90

Condition: used, Year of construction: 2005, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Csbvowc Eciehq U Torb - Max planing width: 500mm - Main motor: 4kW - Year: 2005 - Documentation available: No - CE mark available: Yes - Serial number: 31300016 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: new, Year of construction: 2024, Functionality: fully functional, 7.5 HP 200 mm cutting height 1Hydraulic feed brake Tiltable to the left up to 60°, to the right up to 30°, tiltable from the front using a hand crank Csbvhob Dkyvjq U Torb cutting height 140 mm at 45° inclination Tiltable to the left up to 60° to the right up to 45 Cutting length at 90° - 420 mm Cutting length at 45° - 295 mm Length of the unloading roller conveyor with scale and stop slide left - 6000 mm Length of infeed roller conveyor 2000 mm, attachment side right Machine completely mobile, total length 9000 m inclinable from the front with hand crank, machine is also available with 215 mm or 240 mm cutting height and other options,

Condition: used, Hess gluing stand 5 cylinders vertical (pneumatic) Maximum pressing height = 1850 mm Length approx. 2500 mm Heating rail Crjbvswf U A Rshq U Tsb All information is subject to change without notice.

Condition: used, Year of construction: 2017, Workpiece width max: 1.200 mm Workpiece length max: 13.500 mm Aggregates total: 1 Number of sawing aggregates: 1 Number of milling aggregates: 1 Mortising aggregates: 1 5-axes technology: Yes Automatic marking: Yes Labelling: Yes Workpiece feed: clamp gripper Csbvhov Tqvwoq U Torb Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 35 kW Weight: 17.000 kg Space requirement Length: 32 m Space requirement Width: 6 m Space requirement Height: 4,5 m

Condition: new, Year of construction: 2023, machine/vehicle number: MR004925, Top performance at a competitive price. That characterizes this thicknesser. A constant feed of the workpiece is guaranteed by the grooved infeed roller. A perfect finish by the sanded outfeed roller. Price is ready to use af hine is equipped with the following options: - Tersa shaft with quick-change system. Z=4. - Electric high/low adjustment Technical specifications: Csbvherxcndjq U Terb - Diameter chisel shaft: 95 mm - Maximum planing width: 410 mm - Maximum chip removal: 5 mm - Maximum working height: 240 mm - Diameter extraction nozzle: 120 mm - Speed milling spindle: 5000 /min - Table dimensions: 423 x 775 mm - Motor power: 5.5 hp - Serial number: KK00038806

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) - Residual dust content H3 / Crsbewhpcqjvhq U Tjb

Condition: used, Year of construction: 2013, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Cebvswc Eccshq U Tsrb Nordson unit needs repair - Year: 2013 - Documentation available: No - CE mark available: Yes - Serial number: Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: new, Year of construction: 2024, Functionality: fully functional, 11 kw = 15 hp cutting height 200 mm saw blade diameter 550 mm with broach cutting edges cutting width to rip fence 1500 mm sliding carriage length 3200 mm Crjbvhocyd Ncsq U Tsb sliding carriage mounted on hardened steel rollers (similar to Altendorf) the large crosscut fence can be swivelled 45 ° to the left and to the right; electric height adjustment electric tilt adjustment digital display for the inclination machine weight 1250 kg

Condition: used, Table size approx. 2500 mm x 800 mm Manual height adjustment Without top belt cover Belt length 7500 mm Weight approx. 800 kg Crsbjwf Uz Tjvhq U Tjb Dimensions approx. L x W x H approx. 3800 x 1700 x 1600 mm All information is subject to change without notice.

Condition: used, Year of construction: 2022, Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Workpiece width min: 55 mm Feed min: 10 m/min Feedrate max: 20 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Glue system granulate: glue pot above feeding chain SCM Glue system VC-S4.1: Yes SCM Glue system SGP Smart Glue Pot: Yes Quick-change glue pot: Yes Suitable for PUR glue: Yes Magazine for single strips: Yes Spraying device: Yes SCM Spraying device AAR Anti-adhesive spray unit: Yes Spraying device Lubricant: Yes Spraying device Cleaning agent: Yes Premilling unit: Yes STEFANI Premilling unit RT-E: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes SCM Easy Size Plus: Yes Trimming saw: 2 motors SCM Trimming saw K/SEL: Yes Flush/radius/chamfer milling units: 1 SCM Fine milling unit R-HP MULTIEDGE2R: Yes Corner rounding unit: 2 motors Crebvhq Uov Tn Aze Tsb SCM Corner rounding unit ROUND SK MULTIEDGE: Yes SCM Edsystem: Yes Scraper unit: Profile scraper, Flat scraper SCM Scraper unit RAS-HP MULTIEDGE 2R: Yes SCM Scraper unit RC A/2C: Yes Suitable for nesting: Bündig/Radius/Fasestationen, Profile scraper, Flat scraper Buffing unit: Yes STEFANI Buffing unit SPN: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 5.655 mm Automatic lubrication: Yes Narrow-part infeed: Yes Control: SCM eye-M Software: SCM MAESTRO ACTIVE EDGE Conformity marking: CE mark

Condition: used, Year of construction: 1998, Functionality: fully functional, total height: 3,000 mm, total width: 2,500 mm, filter area: 23 m², type of input current: three-phase, negative pressure: 3,550 Pa, volume flow: 3,450 m³/h, nominal flow rate: 3,450 m³/h, nominal power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Used dust extractor for 2-3 woodworking machines or similar. The unit can be easily installed outdoors. Crsbjwhn T Ijvhq U Tob High-quality equipment with frequency converter and machine detection/slider control. The unit will be fully tested by us and fitted with new filters.

Condition: good (used), Scheer Veneer Saw Cutting length approx. 3000 mm Handwheel tensioning Chain feed L x W x H approx. 4200 x 800 x 1400 mm All information is subject to change without notice. Csbvewf Uztjhq U Tsrb

Condition: good (used), Year of construction: 1985, Carriage length approx. 2800 mm Motor 5.5 or 7.5 KW Hydraulic foot pump Cebvhswf Ut Njq U Terb Cutting width 1200 mm Max. saw blade diameter 450 mm Speeds: Scoring cutter

Condition: good (used), Planing width 630 mm Planing height 230 mm Planing table length approx. 2.20 m Two-knife spindle Motor 6.5 HP Csbvhq Uewf Ur Ej Tsrb Manual table lift Weight approx. 1300 kg No motor brake External dimensions approx. 2300 x 1400 x 1200 mm The data was taken from a brochure and is therefore without guarantee.