Condition: new, Year of construction: 2025, operating hours: 8 h, Machine in pre production *planned to be ready appr. end of may 2025 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Coln Er Njxfwdj Rsrb Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Bäuerle Type 201 tilting spindle router for profiling and milling wood with electric height and tilt adjustment, as well as an Aigner integral stop and feed unit. table width: 2.000 mm Direction of rotation: Left Right Spindle ø: 30 mm clamping length: about 120 mm number of revolutions: 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm Celn Er Njwdrvxj Rerb

Condition: used, Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 0-200-10-2728, For sale is a Homag KL 79 edge banding machine from 2010 in very good, fully operational condition. The machine offers comprehensive features for demanding edge processing and is ready for immediate use in production. Features at a glance: • Two gluing units for maximum flexibility in edge processing • Axis-controlled profile milling for precise and reproducible results • Multi-scraper for perfect edge processing • Axis-controlled corner rounding unit – ideal for complex workpiece geometries • Flat scraper and buffing unit for perfect surface quality • Pivoting jointing unit, suitable for large tool diameters up to 150 mm • Feeder for overhead parts, guarantees right angles during processing Cjln Er Nowhggmo Rerb Additionally available (not included in the price): • PUR pre-melter for processing PUR adhesive • Recirculation system, ideal for increasing productivity in series production Condition: The machine is in good condition, has been regularly serviced, and is currently in operation – a viewing during operation is possible by arrangement. Important: Only the edge bander is for sale for the stated price.

Condition: used, Bäuerle rigid milling machine with feeder Celn Eewf U Dhor N Rerb External dimensions approx. L x W x H 1150 x 1200 x 1100 mm Technical specifications available upon request

Condition: good (used), Code: 0110 Brand: OMS SALVARANI Model: FC 350 R - CE Standard Crslewhffzjn Er N Reb Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 90

Condition: used, Year of construction: 2005, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Max planing width: 500mm - Main motor: 4kW - Year: 2005 - Documentation available: No - CE mark available: Yes - Serial number: 31300016 Celnswc Ecis Er N Rerb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: new, Year of construction: 2024, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. Crelsd Nm Sion Er N Rob . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, Year of construction: 2024, Functionality: fully functional, 7.5 HP 200 mm cutting height 1Hydraulic feed brake Tiltable to the left up to 60°, to the right up to 30°, tiltable from the front using a hand crank cutting height 140 mm at 45° inclination Cjlsb Dkyven Er N Rsrb Tiltable to the left up to 60° to the right up to 45 Cutting length at 90° - 420 mm Cutting length at 45° - 295 mm Length of the unloading roller conveyor with scale and stop slide left - 6000 mm Length of infeed roller conveyor 2000 mm, attachment side right Machine completely mobile, total length 9000 m inclinable from the front with hand crank, machine is also available with 215 mm or 240 mm cutting height and other options,

Condition: used, Year of construction: 2017, Workpiece width max: 1.200 mm Workpiece length max: 13.500 mm Aggregates total: 1 Number of sawing aggregates: 1 Number of milling aggregates: 1 Mortising aggregates: 1 5-axes technology: Yes Automatic marking: Yes Labelling: Yes Workpiece feed: clamp gripper Declaration of CE-conformity: Yes Conformity marking: CE mark Crsln Erev Tqvwj N Rjb Total connection: 35 kW Weight: 17.000 kg Space requirement Length: 32 m Space requirement Width: 6 m Space requirement Height: 4,5 m

Condition: used, Hess gluing stand 5 cylinders vertical (pneumatic) Maximum pressing height = 1850 mm Coln Eowf U A Rjr N Rsrb Length approx. 2500 mm Heating rail All information is subject to change without notice.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. Crolnjwhpcqe Er N Rjb We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) - Residual dust content H3 /

Condition: used, Year of construction: 2013, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Colowc Eccen Er N Rorb These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Nordson unit needs repair - Year: 2013 - Documentation available: No - CE mark available: Yes - Serial number: Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: new, Year of construction: 2023, machine/vehicle number: MR004925, Top performance at a competitive price. That characterizes this thicknesser. A constant feed of the workpiece is guaranteed by the grooved infeed roller. A perfect finish by the sanded outfeed roller. Price is ready to use af hine is equipped with the following options: - Tersa shaft with quick-change system. Z=4. - Electric high/low adjustment Technical specifications: - Diameter chisel shaft: 95 mm - Maximum planing width: 410 mm - Maximum chip removal: 5 mm - Maximum working height: 240 mm - Diameter extraction nozzle: 120 mm - Speed milling spindle: 5000 /min - Table dimensions: 423 x 775 mm - Motor power: 5.5 hp Crjln Er Nsrxcnds Rsb - Serial number: KK00038806

Condition: new, Year of construction: 2024, Functionality: fully functional, 11 kw = 15 hp Cjln Erocyd Ncs N Rerb cutting height 200 mm saw blade diameter 550 mm with broach cutting edges cutting width to rip fence 1500 mm sliding carriage length 3200 mm sliding carriage mounted on hardened steel rollers (similar to Altendorf) the large crosscut fence can be swivelled 45 ° to the left and to the right; electric height adjustment electric tilt adjustment digital display for the inclination machine weight 1250 kg

Condition: used, Year of construction: 2022, Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Workpiece width min: 55 mm Feed min: 10 m/min Feedrate max: 20 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Glue system granulate: glue pot above feeding chain SCM Glue system VC-S4.1: Yes SCM Glue system SGP Smart Glue Pot: Yes Quick-change glue pot: Yes Suitable for PUR glue: Yes Magazine for single strips: Yes Spraying device: Yes SCM Spraying device AAR Anti-adhesive spray unit: Yes Spraying device Lubricant: Yes Spraying device Cleaning agent: Yes Premilling unit: Yes STEFANI Premilling unit RT-E: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes SCM Easy Size Plus: Yes Trimming saw: 2 motors SCM Trimming saw K/SEL: Yes Flush/radius/chamfer milling units: 1 SCM Fine milling unit R-HP MULTIEDGE2R: Yes Crsln Eov Tn Azjr N Rjb Corner rounding unit: 2 motors SCM Corner rounding unit ROUND SK MULTIEDGE: Yes SCM Edsystem: Yes Scraper unit: Profile scraper, Flat scraper SCM Scraper unit RAS-HP MULTIEDGE 2R: Yes SCM Scraper unit RC A/2C: Yes Suitable for nesting: Bündig/Radius/Fasestationen, Profile scraper, Flat scraper Buffing unit: Yes STEFANI Buffing unit SPN: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 5.655 mm Automatic lubrication: Yes Narrow-part infeed: Yes Control: SCM eye-M Software: SCM MAESTRO ACTIVE EDGE Conformity marking: CE mark

Condition: used, Table size approx. 2500 mm x 800 mm Manual height adjustment Without top belt cover Belt length 7500 mm Weight approx. 800 kg Dimensions approx. L x W x H approx. 3800 x 1700 x 1600 mm Coln Er Nswf Uz To Rjrb All information is subject to change without notice.

Condition: used, Year of construction: 1998, Functionality: fully functional, total height: 3,000 mm, total width: 2,500 mm, filter area: 23 m², type of input current: three-phase, negative pressure: 3,550 Pa, volume flow: 3,450 m³/h, nominal flow rate: 3,450 m³/h, nominal power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Used dust extractor for 2-3 woodworking machines or similar. The unit can be easily installed outdoors. High-quality equipment with frequency converter and machine detection/slider control. Celn Erowhn T Is N Rsrb The unit will be fully tested by us and fitted with new filters.

Condition: used, Year of construction: 2009, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! HOU7.338 Holzma HPP/350 - 3800x3800mm - Year 2009 - Saw Carriage with Integrated side aligner - Cadmatic 4 - Saw Blade Projection 80mm - Saw Carriage Speed 150m/min Coln Eswcyzgjr N Rsrb - Program fence Speed 90m/min - Automitic pressure beam height control - Automatic cutting height control - Adjustable contact pressure for pressure beam - Adjustable clamp pressure - Machine bed fully equipped with air jets  - Year: 2009 - Documentation available: No - CE mark available: Yes - Serial number: Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1997, machine/vehicle number: 970715, reserviert frankreich #15989 max. Schnittbreite : 4300 mm max. Schnitthöhe vert. : 2150 mm max. Bearbeitungsdicke : 80 mm Sägeblattdurchmesser : 300 mm Sägeblattbohrung : 30 mm Auflage unten : Rollen starr Materialauflage : Kunststoffelemente Kleinteilauflage : Ja Messsystem : Skala Schwenkung Sägekopf : manuell Befestigung : freistehend Absaugung : Limpio Absaugsystem Celnowgr Hvo Er N Rorb Motorleistung : 3 kW

Condition: ready for operation (used), Year of construction: 2001, This thermo lamination system was manufactured in 2001. The BÜRKLE FFAII 1300 features a working width of 1300 mm and handles panel dimensions from 200 to 1300 mm in width and 400 to 3000 mm in length, with thickness ranging from 8 to 40 mm. It includes a thermal oil heater, smoothing calender, and a comprehensive transport and laminating system. Ideal for high-efficiency thermo lamination processes. For more information about this thermo lamination system, please reach out to us. Application Types Crelswdbd Esn Er N Rsb Pressing / Laminating

Condition: used, Year of construction: 2014, Cutting length: 4.300 mm Pusher stroke: 4.250 mm Number of grippers: 7 Feedrate max: 130 m/min Continuously variable feed: Yes Saw blade projection: 80 mm Saw blade diameter max: 350 mm Cjln Esv Tn A Ior N Rerb Main motor power: 11 kW Scoring saw: Yes Labelling: manually, Yes Lift table in front: Yes For sensible workpieces: Clamping pressure adjustable Stop side: Left HOLZMA | HOMAG Machine table with air nozzles throughout: Yes HOLZMA 2-fingered grippers: Yes Control: HOLZMA CADMATIC 4.1 Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: good (used), Scheer Veneer Saw Cutting length approx. 3000 mm Handwheel tensioning Chain feed L x W x H approx. 4200 x 800 x 1400 mm Cjln Ejwf Uztsr N Rsrb All information is subject to change without notice.

Condition: used, Year of construction: 2011, Working width: 300 mm Planing height: 120 mm Number of spindles: 11 Bottom spindles: 3 Right spindles: 3 Spindles left: 3 Spindles top: 2 Spindle configuration: u-o-r-l-r-l-u-o-u-r/l Spindle rotation speed max 1/min: 6.000 rpm Spindle diameter: 50 mm Feedrate max: 220 m/min Continuously variable feed: Yes Feed motor: 45 kW Main motor power: 70 kW Saw shaft: Yes Saw shaft: 70 kW Vertical cleaving spindle: Yes Jointing technology: straight jointer Spindle(s) with counterbearing: Yes Hydraulic clamping: Yes Seperate motor per spindle: Yes Motoric adjustment: Programmable controller Surface of the machine table: hard-coated WEINIG MarathonCoating: Yes Infeed table length: 1.300 mm Table rollers: driven Lubrication pump: automatic Pneumatic top pressure: Yes First infeed roller controlled: Yes Type of feed roller drive: Cardanic Infeed automatically: Transversal loading feeder KALLFASS HMKVH: Yes Lifting spindle: NC-axis CNC-axes: Yes MÖHRINGER Resaw: Yes MÖHRINGER ML: Yes Querpuffer: Yes WEINIG Cross feeder: Yes Automatic destacking: Yes Control: WEINIG POWERCOM PLUS Conformity marking: CE mark Crsln Eev A U U Aor N Reb Total connection: 445 kW

Condition: good (used), Year of construction: 1985, Carriage length approx. 2800 mm Motor 5.5 or 7.5 KW Hydraulic foot pump Cutting width 1200 mm Max. saw blade diameter 450 mm Speeds: Scoring cutter Celn Eewf Ut Nsr N Rjrb

Condition: good (used), Planing width 630 mm Planing height 230 mm Planing table length approx. 2.20 m Two-knife spindle Motor 6.5 HP Manual table lift Weight approx. 1300 kg No motor brake External dimensions approx. 2300 x 1400 x 1200 mm The data was taken from a brochure and is therefore without guarantee. Cjln Er Nswf Ur Eo Rjrb