Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Dkobot Hagnsu Hgfxel Availability: short term Storage location: Solingen

Condition: new, Year of construction: 2025, Functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Dobu Hgjwf Hdgefxekl Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: good (used), Veneer saw, veneer saw, joint cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with suction Dkjbeb A Hnhou Hgfxel

Condition: used, Year of construction: 2015, Cutting length: 3.800 mm Width of lifting table: 2.200 mm Number of grippers: 9 Feedrate max: 140 m/min Continuously variable feed: Yes Saw blade projection: 95 mm Main motor power: 15 kW Scoring saw: Motoric adjustment SELCO DigiSet: Yes Labelling: manually Lift table: Yes For sensible workpieces: Clamping pressure adjustable Stop side: Left Optimization: Yes SELCO OPTIPLANNING PROFESSIONAL: Yes SELCO Quick Change: Yes Head aligner: Yes Side alignment: Yes Dkebjwgl Iyeu Hgfxjl Control: BIESSE OSI PLUS

Condition: good (used), Year of construction: 1984, Used Killinger wood lathe Model KM 2000 S Year 1984 with KM-300 copying device Center distance 1050 mm Center height 220 mm Spindle mount M 33 Tailstock with MT2 taper quill Tool rest 300 mm 4 speeds: 530-1100-1700-2600 rpm Dkebu Hewd Nldegfxol Motor 400V/0.75 kW Length 174 cm Width 50 cm Height 115 cm Weight approx. 110 kg

Condition: new, Year of construction: 2023, Functionality: fully functional, planing height: 105 mm, planing width: 180 mm, overall weight: 990 kg, SCM Profiset 40 ep, four-sided planer New, exhibition machine, built in 2023 Min. working width (finished size): 23 mm Max. working width (finished size): 180 mm Min. working height (finished size): 10 mm Max. working height (finished size): 105 mm Min. length of single workpiece: 300 mm Feed speed: 6 - 12 m/min Feed motor power: 0.7/1.1 kW (1/1.5 HP) Motor power of horizontal spindles (individually): 7.5 kW (10 HP) Motor power of vertical spindles (individually): 7.5 kW (10 HP) Dkobuowh Nyie Hgfxjl Spindle speed: 6,000 rpm Spindle diameter: 35 mm Clamping length of vertical spindles: 120 mm Clamping length of horizontal spindles: 190 mm Min./Max. Tool diameter on horizontal spindles: 100 mm Min./Max. tool diameter on vertical spindles: 100 - 120 mm Profile capacity without axial adjustment on vertical spindles: 10 mm Planer head adjustment range: +/- 1 mm Feed roller diameter: 120 mm Feed table length: 1,700 mm Adjustment range for planer table and jointing guide: 10 mm Manual lubricant pump Suction nozzle diameter (4 pieces): 120 mm CE-certified

Condition: used, Used machine Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm stroke max 80 mm Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control NRW Dsbu Hsuf Hw Njgfxjkl

Condition: used, Year of construction: 1991, Table dimensions 1200 x 730 mm Motor output 4 kW Spindle length 180 mm table height 920 mm spindle stroke 260 mm Weight 580 kg Spindle speed 3000/4500/6000/7000/10000 rpm Dkebswbi H Asu Hgfxsl Max. table protrusion: 230 mm Max. dimensions of the tools that can be lowered under the table: 320 x 90 mm

Condition: used, Year of construction: 2006, Working dimension X: 3.225 mm Working dimension Y: 1.550 mm Working dimension Z: 200 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 11 kW Rotation speed max: 18.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 17 Vertical drilling spindles: 23 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Dsbuswgl Imo Hgfxskl Groove saw: 90° turnable Edgebanding aggregate: Unit, changeable HOMAG Edgebanding aggregate EASYEDGE: Yes Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Safety device: Safety mat Enclosed drag chain: Yes Control: HOMAG POWER CONTROL PC 85 Software: HOMAG WOODWOP 5.0 Conformity marking: CE mark

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Motor power: 0,8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops Djbu Hekwhffsgfxokl one foot switch press-in die missing!!! Availability: by arrangement Location: Solingen

Condition: used, Year of construction: 2011, Cutting length: 3.800 mm Pusher stroke: 3.800 mm Number of grippers: 8 Feedrate max: 150 m/min Continuously variable feed: Yes Saw blade projection: 110 mm Saw blade diameter max: 420 mm Debu Howgla Aogfxekl Main motor power: 18 kW Scoring saw: Motoric adjustment Groove cutting function: Yes For sensible workpieces: Clamping pressure adjustable Stop side: Right side HOLZMA 2-fingered grippers: Yes HOLZMA Central side aligner: Yes HOLZMA | HOMAG Machine table with air nozzles throughout: Yes HOLZMA Power-Loc: Yes HOLZMA Handling package: Yes HOLZMA Grooving and cutting package: Yes Control: HOLZMA CADMATIC 4.1 PROFESSIONAL Software: HOLZMA HOLZLINK Conformity marking: CE mark Space requirement Length: 6,54 m Space requirement Width: 5,92 m

Condition: used, Used machine Dkebuekwhp Nj Hgfxol table length approx. 2400 mm Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2006, Cutting height max: 170 mm Saw blade diameter max: 500 mm Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Rotation speed steps: 3 Scoring aggregate: Yes Scoring saw width adjustment: electro-motive Controlled axes: Yes Number of controlled axes: 3 Motorised rip fence: Yes Winkelanschlag, Digitalanzeige: Length, Winkel Control: MARTIN TOUCH-SCREEN Dsbuswgk U So Hgfxokl Conformity marking: CE mark

Condition: used, Year of construction: 2018, Used machine Dkebu Hgenbiplefxol

Condition: used, Year of construction: 2023, Independent Z-axes: 2 Number of milling spindles: 2 Djbu Hgfowgk U Ejxokl 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Machine table: Special execution, Feed-through technology Special workpiece clamping system: For doors, Vacuum clamping system Feeding: vacuum lifter, Hedgehog magazine Outfeed: Hedgehog magazine, vacuum lifter Safety device: enclosed fence, Light barrier Chip conveyor: Yes

Condition: new, Year of construction: 2024, New dust extractor Year of construction 2024 Technical data: Certified according to BGHM H3* / CE / GS Power consumption 2.2 kW Current consumption IE2 4.4 A Filter area 9.5 m² Dimensions 1575 x 910 x 2110 Dust garbage can volume 1 x 160 l Weight 405 kg Intake connection 160 mm, right Operating volume flow: 2300 m³/h Volume flow max/nom. 1780/1447 Negative pressure at nominal volume flow 2450 PA Negative pressure in front of the fan at VNenn 3160 PA Maximum sound pressure level 74 dB(A) Filter regeneration pneumatic max. 7.5 bar Operating mode: Continuous operation Compressed air connection must be available Dkjbueruuh Do Hgfxsl Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2011, Edgeband thickness max: 20 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feed min: 18 m/min Feedrate max: 25 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Places in coil magazine: 2 Dobu Howgk Uxegfxskl Glue system granulate: Premelting unit HOMAG Glue system A 20 Gluing unit: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors HOMAG Trimming saw HL 84: Yes Flush/radius/chamfer milling units: 1 HOMAG Flush milling unit BF 10: Yes Corner rounding unit: 2 motors HOMAG Corner rounding unit FK 11: Yes Scraper unit: Profile scraper, Flat scraper HOMAG Scraper unit PN 10 Profile scraping unit: Yes Buffing unit: Yes Type: left-side machine Machine length: 7.845 mm Control: powerControl PC 22 Conformity marking: CE mark

Condition: used, Year of construction: 2019, Used raw air extraction unit Dkobu Hgetr Hfpjfxjl Year of construction 2019 Nominal capacity 2789 m³/h Filter area 1.8 m² max. negative pressure 1668 pa Chip collection volume 160 l Motor 1.1 kW 400 V Extraction nozzle 1 x 120 mm, 1 x 100 mm Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2018, Working dimension X: 3.110 mm Working dimension Y: 1.620 mm Working dimension Z: 180 mm Number of milling spindles: 1 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Cantilever machine: Yes Machine table: Pod and rail table Safety device: Bumper Debu Hgewgk Urjfxokl Chip conveyor: Yes Control: SCM eye-M

Condition: used, Year of construction: 2020, Exhibition machine Debu Hevuctdsgfxskl Year of manufacture: 2020 Equipment and technical data: including suction nozzle d= 250 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW, 400 V / 50 Hz, on / off switch, a potential-free contact for machine monitoring and automatic start / stop function, motor protection switch, volume flow monitoring / pressure difference display, 3 mobile dust bins with inserted chip bag and clamp, solid filter module made of galvanized sheet steel. Technical data: · Maximum volume flow: 5,040 m³/h · Nominal volume flow: 3,532 m³/h · Associated negative pressure: 2,500 Pa · Suction-side connection: d = 250 mm · Operating mode: continuous operation · Current type: three-phase current · Power consumption: 5.5 kW / 11.5 A · Filter area: 25.2 m² · Filter regeneration: automatic, pneumatic · Chip collection volume (total): 480 liters · Chip bags (PE): 600 x 600 x 1100 mm · Weight: approx. 1100 kg · Noise level according to EN 23744: 72 dB (A) · L x W x H: 3,350 x 1,020 x 2,290 mm Required connections: · Standard compressed air coupling NW 7 approx. 6 bar, compressed air serviced and cleaned · 1 x 32 A CEE socket Location: Solingen Availability: by arrangement

Condition: new, Year of construction: 2022, Exhibition machine Year of construction 2022 Equipment and technical data: Outlet on the right with pneumatic shaking off with powder extinguishing Description : Dust extractor type NE 300 with powder quenching with BGHM approval certificate, including suction nozzle, 5 m cable with plug and reversing switch, electric motor 400V/50Hz, on/off switch, lockable motor protection switch; with compressed air tank and compressed air pulse cleaning or pneumatic / motorized shaking, pressure difference indicator, mobile dust garbage cans with clamping bracket and chip collection bag Power consumption: 7.5 kW Power consumption: 13.5 A Filter area: 31.60 m2 Dimensions: 3440 x 1120 x 2420 Dust garbage can volume: 3 x 160 l Weight: 1210 kg Suction nozzle: 300 mm Maximum/ nominal volume flow: 6000/5085 m3/h Negative pressure at nominal volume flow: 2400 PA Negative pressure in front of the fan at Vnenn: 2950 PA Maximum sound pressure level: 74 dB Operating mode: Continuous operation Necessary connections: - Compressed air standard coupling NW 7 approx. 6 bar, compressed air maintained and cleaned - 1 x 32 A CEE socket Djbot Sz Nbeu Hgfxskl With this system, uniform filling of the garbage cans cannot be guaranteed in every operating situation due to different extraction volumes and differing chip/dust contents. Availability: short term Location: Solingen

Condition: new, Year of construction: 2023, New machine Year of construction: 2023 NESTRO® dust extractor, a new generation, more powerful, more compact, more economical and with some highlights that will inspire you. Including a new type of extinguishing device with drop flap and oxygen extraction, 5 m cable and CEE plug with reversible pole, IE3 fan drive, H-O-A selector switch and integrated emergency stop function. The NE-J ECO is of course H3-tested. The newly designed model fits into any standard sea container. The suction nozzle with blow-in box and non-return flap is located in the middle of the front of the dust extractor. The highly efficient JET filter regeneration guarantees long filter service life, low filter resistance and therefore high extraction performance. The dust garbage cans are each equipped with 4 swivel castors, a viewing window for checking the fill level and a sturdy chip collection bag. Technical data: Volume flow max./nom.: 8,000 / 6,925 m³/h Debu Hgforuuidoxskl Vacuum v.v./nom.: 3,400 / 2,750 Pa Suction side connection: Ø 350 mm Operating mode: Continuous operation Type of current: Three-phase current Power consumption: 11 kW /21 A / 50 Hz Filter area: 38 m² Filter regeneration: JET / automatic Compressed air consumption per cycle: 560 Nltr. Chip disposal: Chip garbage can with PE bag Weight: approx. 1,250 kg Noise value according to EN 11201: 72-74 dB(A) according to MRI (+/- 4dB) Length x width x height: 1,060 x 3,981 x 2,174 mm Necessary connections: Compressed air standard coupling NW 7.2; 6 bar, compressed air dry and oil-free 1 x 32 A CEE connection socket Location: Solingen Availability: short term

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is Debu Homrxznjgfxokl extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: used, Used machine Condition: age-appropriate Technical data: Table size 2600 x 900 mm Max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right Availability: short term Djbusv Aqx Do Hgfxekl Location: Solingen

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Automatic horizontal and vertical positioning for absolute and chain dimensions Digital display for horizontal cutting PLC control with 2-line display and plain text display for processing mode and error diagnosis infinitely variable feed rate up to 24 m/min automatic workpiece end detection Calculator function in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm max. trimming height 2100 mm max. scoring height, vertical 2100 mm max. cutting depth 80 mm Motor 5.5 kW Saw blade speed 4500 rpm Saw blade diameter 300 mm Air requirement 1200 m³/h Air speed 20 m/s static negative pressure 1200 Pa Extraction connection: 2 x 120 mm Dimensions L x W x H 5620 (plus extraction nozzle) x 1480 x 2948 mm Room height 2990 mm Compressed air connection: 6 bar Air consumption 50 NL/min Electrical connection value: 5.7 kW With Supercut scoring device With pneumatically pivoting saw unit With longitudinal stop for lower workpiece support With folding rail, short, complete Availability: by arrangement Dkobusu Dru Ts Hgfxel Location: Solingen