Year of construction: 2022, Condition: new, XSD310 400 Volt Weight: 280 kg Surface planer planing width: 310 mm total length of planing table: 1400 mm diameter planer shaft: 70 mm Tersa knife shaft rpm: 5500 dimensions planing fence: 1300 x 150 mm Dobjdkl Sqo Et Nb Tjkl inclination adjustment of dressing fence: 90 - 45 degrees Maximum chip removal: 4 mm Motor power 4 HP Thickness planer dimensions thicknessing table: 430 x 310 mm passage thickness planer: 230 mm diameter infeed rollers: 30 mm feed speed: 6m/min Accessories: Tersa knife shaft Handwheel adjustment thicknessing table with mechanical indicator Location: Ex stock 54634 Bitburg Machine is in our showroom and immediately available.

Condition: used, Year of construction: 2012, Empty weight: 2.500 kg Dimensions (LxBxH): 140 x 400 x 160 cm Price: On request - Extraction nozzle diameter: 120mm - Max planing width: 150mm - Cutter block diameter: 120mm Deb Et Nov Rl Uceb Tokl - Number of blades: 8 - Year: 2012 - Documentation available: No - CE mark available: Yes - Serial number: 117119 - Voltage [V]: 400 - Transport dimensions: 1400mm x 4000mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P - Intake nozzle Ø: 200 mm - nominal motor power: 2,9 kW; 400 V/50 Hz - max. volume flow: 3010 m³/h - nominal volume flow: 2262 m³/h - negative pressure: 2174 Pa - filter surface: 13,7 m² - filter cleaning: Compressed air cleaning - 2 pcs. filling container (roll container): a. 241 litres - Dimensions ( L x W x H ): 2322 x 830 x 2050 Dksbobpg Ncs Et Nb Tol - weight: 320 kg - Execution / operating side alternatively right / left Location ex stock Bitburg Top price for the exhibition piece

Condition: used, Year of construction: 2001, Price: On request Dowel Drill 400V 6kW Dsb Et Njv Rdrajb Tekl 6Bar. - Year: 2001 - Documentation available: Yes - CE mark available: Yes - Serial number: 7251 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2024, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm hopper height: 1010 mm hopper capacity: 1,1 m³ driving power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Dsb Et Nbebtnf Ee Tjkl Briquette quantity monitoring Automatic On - Off Location: 54634 Bitburg

Condition: used, total height: 2,360 mm, total width: 2,100 mm, total length: 1,230 mm, outer dimension length: 1,230 mm, outer dimension width: 2,100 mm, - Number of filter bags [pcs]: 30 - Filter length [mm]: 1740 - Filter diameter [mm]: 210 - Connection diameter [mm]: 260 - Main fan [pcs]: 1 - Main fan power [kW]: 4.0 - Control cabinet present: Yes - Shaking system: Yes - Collection bins: Yes - Number of bins/bags [pcs]: 2 - Documentation available: No - Transport dimensions: 1230mm x 2100mm x 2360mm (l x w x h) - Transport packages [pcs.]: 3 Dkeb Ejv Rd U Iot Nb Tsl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into Dob Et Nbjcbtpks Tokl and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: used, Year of construction: 2005, total width: 850 mm, total height: 100 mm, total length: 900 mm, Weight: 370 kg Djb Ejv Rdxgot Nb Tskl - Number of blades: 4 - Max planing width: 400mm - Main motor: 4kW - Max planing height: 240mm - Extraction nozzle: 110mm - Min planing height: 20mm - Year: 2005 - Documentation available: No - CE mark available: Yes - Serial number: - Voltage [V]: 400 - Transport dimensions: 900mm x 850mm x 100mm (l x w x h) - Transport weight [kg]: 370kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 2025, Condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Dksbjdwh E Ao Et Nb Tsl Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: used, Year of construction: 1980, Dimensions (LxBxH): 160 x 335 x 150 cm Price: On request 1e as: Single saw 2e as: Upper 3e as: Lower 4e as: Multibladesaw - Extraction nozzle diameter: 110mm - Max planing width: 620mm - Number of blades: 4 Dsb Et Nbov Rdx He Tokl - Year: 1980 - Documentation available: No - Serial number: 10517 - Transport dimensions: 1600mm x 3350mm x 1500mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Surface planer with 520 mm planing width and motorized thicknessing table adjustment Sturdy cast iron construction Large, ribbed planing tables made of grey cast iron, annealed against distortion Smooth running due to high dead weight Four feed speeds Motorized thicknessing table stroke with two speeds and digital display Link pressure shoes in the infeed 4-blade shaft, precision bearing mounted Sharp toothed steel feed roller for particularly even and gentle wood feed Extraction roller with rubber coating Large dressing fence, inclinable 90°- 45° readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa planing cutter Change of planing knives in seconds When starting the machine, the planing knives are automatically clamped by the centrifugal force - self-locking The knife protrusion adjusts automatically without adjustment and screwing Djbebxz S Hs Et Nb Tjkl The planing table is adjusted by a stable and precisely guided parallelogram system, so that the distance of the table tips to the cutter head remains the same in every adjustment position. The sturdy aluminium dressing fence is anodised as standard, easily adjustable and offers a large contact surface. The adjustable inclination from 90° to 45° is easy to read from the workstation. Standard with auxiliary fence for safe planing even of narrow workpieces Fig. with optional equipment The connection position of the suction i

Condition: used, Year of construction: 2006, - Number of filter bags [pcs]: 32 - Filter length [mm]: 2000 - Filter diameter [mm]: 230 - Connection diameter [mm]: 300 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Shaking system: Yes - Type of shaking system: Electric - Collection bins: Yes - Number of bins/bags [pcs]: 2 - Year: 2006 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets Dksb Eev Rfd Ret Nb Tsl

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Nominal volume flow : 3.534 m³ / h Djbscdr E Ao Et Nb Tskl Negative pressure 2.451 Pa Filter area 22,4 m² Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Subject to prior sale

Condition: used, total length: 1,200 mm, total height: 2,300 mm, total width: 5,300 mm, Price: On request - Documentation available: No - Serial number: 1323/0-503 - Voltage [V]: 400 - Transport dimensions: 1200mm x 5300mm x 2300mm (l x w x h) Dkjb Et Nbev Sb Izs Tsl - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio Dsb Etetnz Hbo Nb Tskl excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: used, Year of construction: 2012, total height: 2,900 mm, total length: 5,510 mm, total width: 1,450 mm, Weight: 865 kg - Max. vertical cutting height [mm]: 2150 - Vertical cutting: Yes - Max. horizontal cutting height [mm]: 2100 - Horizontal cutting: Yes - Max. cutting depth [mm]: 55 - Max cutting width [mm]: 4400 - Max. saw blade diameter [mm]: 250 Dsbsv Tu H Hj Et Nb Tskl - Year: 2012 - Documentation available: No - CE mark available: Yes - Serial number: 1111212 - Voltage [V]: 400 - Power [kW]: 3.0 - Transport dimensions: 5510mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 865kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2024, CNC machining center ROVER A SMART 1632 Working area X = 3280 mm Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H 74 mm Z 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H 29 mm Workpiece passage: Y = 1900 mm Axis travels X = 3706 mm Y = 2294 mm Z1 = 515 mm Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. The machine has been designed to work with up to 2 pumps among those available. The electro-pneumatic pre-equipment is adequately dimensioned according to the number and type of pump selected. ASSISTING VACUUM SYSTEM - 2 areas It allows the clamping of workpieces through vacuum templates. 6 ATS workpiece supports 18 module supports Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position indicator. Work table for processing solid wood. Djb Etsufggws Nb Tokl Subdivision of the pneumatic system into 2 working areas in X Rear row fence with 115 mm stroke and 25 mm fence extensions. The fences, pneumatically lowerable and CNC-controlled Stop of the middle row, positioned at 1080 mm, with 140 mm stroke. 4 side stops with 140 mm stroke complete with pneumatic equipment. 2 additional side stops with 140 mm stroke Sensor for monitoring the lowering of the stop. 4 positioning aids for vacuum module height = 74 mm 250 m3/h vacuum pump Vacuum module 132 x 146 - H74 mm Vacuum module 132 x 75 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles. Vacuum module 132 x 54 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles Chip conveyor belt Automatic lubrication system Machining unit with 5 interpolating axes 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled 11 KW (15 HP) from 12,000 rpm to 20,000 rpm, use S1 13 KW (17.4 HP) from 12,000 rpm to 20,000 rpm C-axis: 360° endless rotation Suction hood with 12 NC-controlled positions for electrospindle with 5 axes Coolant system Additional Z-axis support for rear machining units, with independent Z-axis BH 24 L drilling head 13 individually retrievable vertical drilling spindles with 32 mm pitch, 8 in X and 5 in Y 5 horizontal drilling spindles with double output and center distance 32 mm, 3 in X + 2 in Y 1 grooving saw in X d120 mm Turret tool magazine with 16 places, installed directly on the machining unit X Lateral tool magazine with 12 pockets in the machine bed HSK F63 tool holder, equipped with a long integrated flange, for saw blades on 5-axis head Digital devices for measuring the tool length with d up to 130 mm software B-Solid SOPHIA - IoT Connection SmartConnection NC-Hops 7.0 machine license 4-/5-axis NC-Hops 7.0 1.AV License 4-/5-axis Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2006, Empty weight: 10.000 kg Price: On request Extraction; Dkjb Et Nbjv Rdhbs Tsl Höcker Polytechnik Year of construction 2006 Return air Band hose coupling Dimension drawn up; 8000x2500x11000mm (LxWxH) 106kW, fused 315 Amp Exclusive; Baling presses, briquette press etc. This is possible in one total package. - Control cabinet present: Yes - Shaking system: Yes - Year: 2006 - Documentation available: No - Power [kW]: 106.0 - Transport weight [kg]: 10000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2018, operating hours: 619 h, Weima briquetting press C 140 top condition Dkebevlv N Ts Et Nb Tol Only 619 operating hours Year of manufacture 2018 Compact design, high reliability and an excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Total dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput (kg/h) 30-40 Hydraulic oil quantity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated pliers Pre-compressor with end-position dampened cylinder and screwed cover Switch box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: used, Year of construction: 2003, Price: On request Four-sided planer SCM Superset XL 5-axis Serial no. AB/155358 Year of construction 2003 Weight 2400kg - Year: 2003 - Documentation available: No - Serial number: AB/155358 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dkjb Et Nbjv Rdpfe Tjl Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift Dkob Etevk Dqvs Nb Tsl - very good condition - Pneumatic tensioner Revolver stop Material support Pneumatic foot pedal Location: from stock 54634 Bitburg - immediately available -

Condition: used, HM-ZN 8500 undercutting saw Serial number: 277 Connection Voltage: 400V- 6,6KW Weight: 1400 KG Saw blade max: 700mm Saw blade min: 600mm Bore: 30mm Saw blade tiltable Length automatic feed: 9500 mm Length output conveyor: 4300 mm Total dimensions: 15000x1500x1800 mm (LxWxH) Djb Et Nsv Rdvfob Tjkl - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, total width: 1,750 mm, total length: 1,800 mm, total height: 1,600 mm, Weight: 1.900 kg Price: On request Debjv Rdv Se Et Nb Tskl - Conveyor belt width: 350mm - Conveyor Motor Power: 0.0kW - Arbor saw blade diameter: 650mm - Year: 2012 - Documentation available: Yes - CE mark available: Yes - Serial number: 12236 - Voltage [V]: 400 - Fuse [A]: 100 - Power [kW]: 57.0 - Transport dimensions: 1800mm x 1750mm x 1600mm (l x w x h) - Transport weight [kg]: 1900kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, Empty weight: 2.500 kg Dimensions (LxBxH): 362 x 214 x 165 cm Dksb Etev Rdyqo Nb Tsl Price: On request Four-sided planer Weinig Profimat 600, 5-head Year of construction 2014 Machine number 119676 min/max Working height 8/120 mm min/max Working width 20/230 mm Working speed 5/30 m/min Spindle speed 6000 rpm Spindle diameter 40mm Total power: 41kW Motors 1. Spindle - horizontal below 2. Spindle - vertical right 3. Spindle - vertical left 4. Spindle - horizontal above 5. Spindle - horizontal below  Dimensions 3620 x 2140 x 1650 mm (L x W x H), weight +/-2500 kg - Year: 2014 - Documentation available: No - CE mark available: Yes - Serial number: 119676 - Transport dimensions: 3620mm x 2140mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2005, total width: 1,100 mm, total height: 1,120 mm, total length: 1,000 mm, - Number of height adjustment cylinders: 4 - Max planing width: 500mm - Max planing height: 250mm - Work table width: 520mm - Extraction nozzle: 140mm - Work table length: 60mm - Year: 2005 - Documentation available: No - CE mark available: Yes - Serial number: AB 173436 - Voltage [V]: 400 - Transport dimensions: 1000mm x 1100mm x 1120mm (l x w x h) - Transport packages [pcs.]: 1 Dsb Et Nev Rfc Heb Tjkl Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets