Condition: new, Year of construction: 2024, CNC machining center ROVER A SMART 1632 Working area X = 3280 mm Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H 74 mm Z 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H 29 mm Workpiece passage: Y = 1900 mm Axis travels X = 3706 mm Y = 2294 mm Z1 = 515 mm Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. The machine has been designed to work with up to 2 pumps among those available. The electro-pneumatic pre-equipment is adequately dimensioned according to the number and type of pump selected. ASSISTING VACUUM SYSTEM - 2 areas It allows the clamping of workpieces through vacuum templates. Fpjb Eeufggwe Swr Tjg 6 ATS workpiece supports 18 module supports Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position indicator. Work table for processing solid wood. Subdivision of the pneumatic system into 2 working areas in X Rear row fence with 115 mm stroke and 25 mm fence extensions. The fences, pneumatically lowerable and CNC-controlled Stop of the middle row, positioned at 1080 mm, with 140 mm stroke. 4 side stops with 140 mm stroke complete with pneumatic equipment. 2 additional side stops with 140 mm stroke Sensor for monitoring the lowering of the stop. 4 positioning aids for vacuum module height = 74 mm 250 m3/h vacuum pump Vacuum module 132 x 146 - H74 mm Vacuum module 132 x 75 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles. Vacuum module 132 x 54 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles Chip conveyor belt Automatic lubrication system Machining unit with 5 interpolating axes 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled 11 KW (15 HP) from 12,000 rpm to 20,000 rpm, use S1 13 KW (17.4 HP) from 12,000 rpm to 20,000 rpm C-axis: 360° endless rotation Suction hood with 12 NC-controlled positions for electrospindle with 5 axes Coolant system Additional Z-axis support for rear machining units, with independent Z-axis BH 24 L drilling head 13 individually retrievable vertical drilling spindles with 32 mm pitch, 8 in X and 5 in Y 5 horizontal drilling spindles with double output and center distance 32 mm, 3 in X + 2 in Y 1 grooving saw in X d120 mm Turret tool magazine with 16 places, installed directly on the machining unit X Lateral tool magazine with 12 pockets in the machine bed HSK F63 tool holder, equipped with a long integrated flange, for saw blades on 5-axis head Digital devices for measuring the tool length with d up to 130 mm software B-Solid SOPHIA - IoT Connection SmartConnection NC-Hops 7.0 machine license 4-/5-axis NC-Hops 7.0 1.AV License 4-/5-axis Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 1980, Condition: used, passage width 560 mm passage height 560 mm Fsb E Secvhndswr Tjpg stroke 600 mm Speed max. 320 1/ min. The creel is completely mechanized with new Moehringer high speed infeed.

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- Fpeb E Sevu Hfqowr Tsg > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: slat conveyor > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: Note on used tools: We currently have used Gold...

Condition: used, Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 0-200-10-2728, For sale is a Homag KL 79 edge banding machine from 2010 in very good, fully operational condition. The machine offers comprehensive features for demanding edge processing and is ready for immediate use in production. Features at a glance: • Two gluing units for maximum flexibility in edge processing Fpsb E Swrowhggme Tjg • Axis-controlled profile milling for precise and reproducible results • Multi-scraper for perfect edge processing • Axis-controlled corner rounding unit – ideal for complex workpiece geometries • Flat scraper and buffing unit for perfect surface quality • Pivoting jointing unit, suitable for large tool diameters up to 150 mm • Feeder for overhead parts, guarantees right angles during processing Additionally available (not included in the price): • PUR pre-melter for processing PUR adhesive • Recirculation system, ideal for increasing productivity in series production Condition: The machine is in good condition, has been regularly serviced, and is currently in operation – a viewing during operation is possible by arrangement. Important: Only the edge bander is for sale for the stated price.

Condition: used, Year of construction: 2003, Functionality: fully functional, Saw blade diameter 500 mm Saw blade motor power 4.0 kW ATTENTION: No motor brake Roller conveyors: 1 m to the left of the saw blade 2 m to the right of the saw blade Roller diameter 60 mm Usable width approx. 590 mm 2 manually adjustable folding stops Scale rubbed off and difficult to read Emergency stop switch in the operating area Working height approx. 760 mm Connected loads: 400 V 3Ph, 50 Hz Suction connection diameter: 100 mm Fpjb E Sjuglvtjwr Teg Optional: Renewal of the dimension scale

Condition: ready for operation (used), Year of construction: 2001, Additional Equipment System design FFAII 1300 includes: Brushing machine DBM (chain brushes) / Thermal oil heater 36 kW / Hardener application machine DAH + complete hardener circulation system with monitoring / Conveyor line + IR zones with temperature sensors / DAK adhesive applicator + automatic level sensing / Cooling unit for DOW cooling / Glue feeder / TKE cone transport line / EKM laminating calender, D = 500 mm + film unwinding station + cutting station + belt transport line with operating bridge for FVE / Expansion shafts / GKL smoothing calender, D = 500 mm at the conveyor belt infeed / 96 kW thermal oil heater for laminating calender and smoothing calender / Central cabinet / I.S.E. Optimat ISL 111 / Bargstedt stacking station This BÜRKLE FFAII 1300 laminating press was manufactured in 2001. Ideal for various laminating applications, it ensures consistent performance and reliability. Consider the opportunity to buy this BÜRKLE FFAII 1300 laminating press. Contact us for more information. Application Types Pressing / Laminating Fpeb E Swjv Nb Hrsr Tjg

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Flexibility for today and tomorrow. Fpeb E Swrer Hr D Ne Teg Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Equipment: T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod T 2790-La Console for feed stand attachment left The photo only shows an example machine / feed is not included Location: Comes to stock 54634 Bitburg - available in two weeks -

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. Feb E Sowhpcqowr Tjpg The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) - Residual dust content H3 /

Condition: used, Year of construction: 2006, POUWELS SEMI-AUTOMATIC STAIR ROUTER LARGE WORK TABLE & VACUUM-MOUNTED PART FIXING Brand: POUWELS Type: DEF 500A Serial No.: 171 Year: 2006 Machine offered as is, with no special work required at this price. But can be reconditioned: contact us. The Pouwels DEF 500 A semi-automatic router was specially designed for staircase manufacturers, but not only. It offers machining freedom, combining digital precision and manual work! MACHINING CAPACITIES: - Vertical or horizontal milling and drilling - Head (arm) rotation: -70/+70° - Lateral grooving or drilling, motor tilt: 0-90° - Chuck speed from 0 to 18,000 rpm - Electric and pneumatic movements, strokes: X axis (length): 4750 mm Y axis (width): 900 mm Z axis (height, thickness): 150 mm - Adjustment accuracy: 1/10 mm MACHINE COMPOSITION: - Robust, welded frame NSK slide for all axes - Work surface: 6000 x 500 mm Smooth table 6000 x 620 mm with depth stops Two removable grooved aluminum vacuum shelves 200 x 500 mm Set of 4 free-standing suction cups - 4 kW milling/routing electric spindle Variable speed start ER25 tool holder connection Positioning laser and double bit thickness lines - Automatic step device for milling and drilling Depth gauge device on barrels Bit depth adjustment device - Milling stops and manual locks Step width and thickness - Touchscreen control panel Digital angle and depth displays Foot control OTHER FEATURES: - 400V overall power supply. 3-Phase + N+T 50Hz 5G 2.5² cable - Installed power 4.5 kW (6.1 hp) IN 12A Main motor 1.6/4 kW 1 x 2.4 kW vacuum pump Fjb E Swjlc Hyvsr Tepg - Pneumatic supply 8 Bar - Extraction, 1 x 100 mm diameter closable hood Recommended flow rate: 3000 m3/h Shipping dimensions: 5.30 x 1.20 x h. 1.80 m Estimated total weight: 2250 kg - Overall dimensions: 6000 x 2000 x h. 1800 - Weight: 2300 kg Machine supplied with operating instructions, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or extraction systems. Possibility of supplying some used and new tools: contact us!

Condition: new, Year of construction: 2024, Functionality: fully functional, - New machine offer - Fpjb E Swrsu Nykts Teg Pneumatic saw blade feed Motor power 7.5 KW Cross section max. 280 x 135 mm, or 360 x 55 mm complete with: * 1 mtr. work table to the left and right of the saw blade * beveled plate behind saw cut for removal of trimming cuts trimming cuts * 2-hand operating device * Front saw blade guard * Carbide saw blade diam. 500 mm * Fixed front guard (no protective grid) Further options on request

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Motor 2,2 KW/400 Volt Table size approx. 580x715 mm Finely adjustable milling fence spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Spindle stroke 130 mm Tool up to Ø 180 mm Suction connection 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available - Fpsb E Ssr Id S Ejwr Tjg

Condition: used, Year of construction: 1998, Functionality: fully functional, total height: 3,000 mm, total width: 2,500 mm, filter area: 23 m², type of input current: three-phase, negative pressure: 3,550 Pa, volume flow: 3,450 m³/h, nominal flow rate: 3,450 m³/h, nominal power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Used dust extractor for 2-3 woodworking machines or similar. The unit can be easily installed outdoors. High-quality equipment with frequency converter and machine detection/slider control. The unit will be fully tested by us and fitted with new filters. Fsb E Swewhn T Ior Topg

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Table size 2,200 x 830 mm Swivel range of the milling spindle -6 to +45 degrees Height adjustment of the milling spindle 125 mm Table opening adjustable for tool 70 mm - 230 mm Weight of the machine approx. 1,000 kg Milling motor 7.5 KW, speed frequency-controlled Motorized adjustment of the milling spindle height and swivel with Febevt Nv Ae E Swr Tjpg LED display Integral stop manually adjustable with digital display Shows the distance of the rear stop jaw to the spindle center in absolute value KOELLE KK40 milling mandrel quick-change system Extendable table support

Condition: good (used), Year of construction: 1995, Maka universal edge sanding machine with oscillating sanding belt Type: KSM 150/2 Oscillation: yes Solid sanding device: yes Funnel sanding device: yes Can be tilted up to: 45 - 0 + 45° degrees Motor power: 2.0 kW Suction nozzle Table size: 1440 x 220 mm Fjb E Ser Igtrjwr Tjpg Weight: 530 kg Sanding sleeve device CE marking Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, VERY WELL MAINTAINED MULTI-PURPOSE SURFACE SANDING MACHINE WITH CROSS AND LENGTHWISE BELT; SUITABLE FOR WOOD CALIBRATION SANDING; WOOD SURFACE SANDING AND INTERMEDIATE LACQUER SANDING. Working width max. 1,300 mm Conveyor belt with vacuum device Transport blasting device with pressure regulator Feed motor 1.5 KW Feed rate 3 - 15 m/min CSD - Computer controlled selective pressure regulation technology with 2 mm tolerance compensation Spacing of the control rollers 16 mm, pressure shoe pitch 48 mm, switch distance 82 mm Feb Eeumtg Ie Swr Tepg Unit equipment: 1) Cross sanding unit Belt dimensions with lamellar intermediate belt Sanding belt dimensions 15 x 4,800 mm Sanding belt speed infinitely variable can therefore be used for surface and lacquer sanding 2) Longitudinal sanding unit with sanding drum and sanding pad combined, therefore suitable for calibration sanding as well as for wood and veneer surface sanding Infinitely variable sanding belt speed, therefore also suitable for can also be used for lacquer sanding Sanding belt dimensions: 1,350 x 2,620 mm Control system: Machine control unit on the right-hand machine control unit 20 programs can be stored Transport dimensions: 2.4 x 2.2 x 2.35 m Weight approx. 5.4 tons

Condition: excellent (used), Year of construction: 2018, operating hours: 619 h, Weima briquetting press C 140 top condition Only 619 operating hours Year of manufacture 2018 Compact design, high reliability and an excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Total dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput (kg/h) 30-40 Hydraulic oil quantity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated pliers Pre-compressor with end-position dampened cylinder and screwed cover Switch box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor Fjb E Sovlv N Towr Tjpg Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: used, Year of construction: 1979, Functionality: fully functional, Spindle diam. 30 mm Speeds 2,800 - 4,500 - 6,500 - 10,000 rpm Motor 10 HP Table dimensions 1,100 x 1,000 mm Suction nozzle diameter 2 x 120 mm Fsb E Sweum S Azer Tspg Swivel range -5 to +45 degrees Max. spindle stroke 130 mm Various tools available at extra cost incl. 4 - roller feed unit HOLZHER type 1112 4 speeds each in forward and return motion Self-made table extension right & left

Condition: good (used), Year of construction: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Fsb E Ssvk Dqvewr Tepg Pneumatic tensioner Revolver stop Material support Pneumatic foot pedal Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1999, Functionality: fully functional, Table length 630 mm Table width 285 mm Table height 800 mm Drilling depth max. 180 mm Height adjustment max. 200 mm Drill chuck 0 - 20 mm Motor power 2.2 kW Drilling unit can be swiveled Fpsbjupzybj E Swr Tjg Removable center stop with cam-type turret, for drilling in different patterns (cam missing)

Condition: good (used), Year of construction: 2015, Functionality: fully functional, Working area: X-axis 3,765 mm Y-axis 1,585 mm Table in grid plate design 4 workpiece stops in the X direction at the back 6 workpiece stops in the X direction at the front 2 workpiece stops in the Y direction, each left and right 2 work fields (alternating field assignment) Milling spindle 12 kW HSK F63 with torque support for locking adapter units Fpsb E Swsvrw S Nsr Tog Tool magazine for 12 tools 2 vacuum pumps each 250 cbm/h PC control with BIESSE Works and BIESSE Nest Protective grille with access door on the left side Safety mats in front of the machine

Condition: good (used), Year of construction: 2003, Functionality: fully functional, Fully automatic electronic control with program selector switch RINSE-GLUE-GLUE/DRIVE - Dowel feed via electronic vibrating conveyor with potentiometer for stepless adjustment of the dowel feed rate - Closed glue system with 6 bar glue pressure via glue nozzle - GLUE/WATER selector switch for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - 1 stainless steel container for 7.5 kg glue, as well as 1 stainless steel container for 7.5 l water for rinsing/cleaning incl. 1 gun for dowels Ø 8 mm Fpjb E Swjv Aubpor Tsg Dowel length 25 - 40 mm Glue/dowel driving tool completely overhauled and no longer used

Condition: new, Year of construction: 2024, Functionality: fully functional, NEW MACHINE - READY FOR DEMONSTRATION IN STOCK Aluminum arm Fpobou Rafae E Swr Tjg Unit runs on linear guide rails Constant zero point even when the cutting angle is changed Automatic pneumatic opening of the saw blade guard Return spring for return of the saw unit in idle position Support table equipped with exchangeable MDF sacrificial plate Complete operation of the machine from the front Motor 400/3/50 PS.5,5 (kW 4) Total weight 320 kg Machine complete with: with: Carbide saw blade Ø 500 mm F=30 Motor speed 2800 rpm Horizontal tilting +60 / 0° /-45° Vertical tilting 0° +45° Horizontal tilting pneumatically locked Dust extraction nozzle 150 mm Cutting width with horizontal swivel: at 90°: 600 mm. at 60° rotation: 300 mm. at 45° rotation: 420 mm. Cutting height with vertical swivel at 0°: 175 mm. at 15°: 130 mm. at 45° - bevel: 100 mm. Further options on request

Condition: new, Year of construction: 2024, Functionality: fully functional, saw blade diameter: 600 mm, OPTIMIZATION CROSS-CUTTING SYSTEM WITH ROTATING SAWING UNIT CT600 / 6000 max. blank length 6,000 mm Cutting dimensions unit position A At 0° 200x215, 50x370 mm At 30° 200x185 mm, 50x325 mm At 45° 200x150 mm, 50x265 mm At 80° 200x35 mm, 50x63 mm Cutting dimensions unit position B At 0° 160x315, 40x400 mm At 30° 160x270 mm, 40x350 mm At 45° 160x220 mm, 40x285 mm At 80° 160x52 mm, 40x70 mm Min. workpiece thickness 10 mm (with automatic feeding 20 mm) Support table inclined at 8° Slider stop side on the right Technical data saw unit: Aggregate completely rotatable with table Motor 7.5 KW, 400 Volt, 50 Hz HM saw blade diameter 600 mm, F=30, Z=60, S=5 Cutting cycle duration approx. 4 sec. Automatic rotation of the aggregate -70° to +70° Saw aggregate rotation -80° to +80° on request Rotation of the aggregate from 0° to 70° in approx. 1.3 sec. Fpsbov Aub Ns E Swr Tog Positioning accuracy +/- 0.2° Hold-down system consisting of 2 pneumatic Pressure cylinders with mounted pressure rail Side pressure plate system with electronic control Technical data slider system: Feed via gear/rack system with "brushless" motor Positioning accuracy +/- 0.4 mm Power of the feed motor suitable for pushing a package weight of 80 kg Max. feed speed 90 m/min. Pneum. slider lift after completion of the cutting cycle and return above sliding level Control: 12 inch "touch screen" BECKHOFF professional PC with WINDOWS operating system USB port Ethernet port Loading and saving machine data via USB Editing cutting program directly on the input unit Transferring cutting lists via USB or Ethernet Direct import of .btl (10.4) format files Working software: Up to 1000 cutting lists with up to 11 different cutting dimensions or 1 list with 10000 different cutting dimensions. Cutting dimensions in sequence Cutting cycle with 4 optimization options (Max. length, min. waste, sequence, length priority) Graphic display of the workpiece Additional options installed: ZA110 discharge table (per meter) ZA040 saw unit table rotation 80°

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Working dimensions: X-axis approx. 3,050 mm Y-axis approx. 1,200 mm Workpiece thickness max. 60 mm when using the gluing unit Console clamping table with: 6 workpiece support supports with hoseless 2-circuit. Clamping system 1 workpiece stop per support in the X direction 1 workpiece stop each on the left and right, movable 2 workpiece stops on the back of the table for large workpieces Table designed for 2-compartment occupancy when using the gluing unit, for pendulum machining when drilling and milling 4 plug connections for connecting pneumatic clamping elements Machine zero point front left 4 pcs. Lifting rails, facilitate the positioning of heavy workpieces LED setup aid for clamping table, facilitates the positioning of the consoles and the vacuum suction device Main spindle 11 KW, vector-controlled HSK F63 mount Speed max. 18,000 rpm Spindle retraction stroke, enables the use of the drilling head with exchanged profile milling unit Tool length including tool holder up to max. 150 mm C-axis with unit interface with pneumatic interface Unlimited swivel range 12-way disc changer Drilling unit with: 11 vertical spindles in X direction 7 vertical spindles in Y direction Horizontal drilling / grooving saws in crosshead design, swiveling 0/90 degrees Replaceable gluing part, housed on the right side of the machine stand POWERCONTROL PC85 control system with the following HOMAG software: + WOODWOP with technology database + WOODSCOUT Fpsb E Swevpubpsr Tog Adapter units: + Saw-drill unit, manually pivotable + Lock case milling unit, 2 outputs + Drilling/milling unit, 4 spindles + Combination unit, radius milling/scraping blade

Condition: new, Year of construction: 2024, - NEW MACHINE OFFER - Cutting of fixed lengths according to cutting list and cutting out of defects Cutting cycle: Capping of imperfections by chalk marking Cutting with fixed lengths, Standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths for single piece loading Fob Eeu Nhcqe Swr Tjpg WS.1 Continuous cross-cut saw 4 lower infeed rollers 1 loading table 2 mt. Right with double marking table 1 pc. Outfeed table 1 mtr. with rear stop Height of rollers adjusted manually 12 pcs. luminescent chalk Cutting capacity: Pos. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Pos. B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming variants: - Defect caps through marking - Working with cutting list consists of 10 dimensions, repetition option for each dimension each dimension and total number of pieces for each dimension 100 memory locations for cutting lists Recognition system of the last two pieces to be cut and the following piece Electronic control of the sorting unit with no. 1 ejection kicker (ejection kicker optional) Technical features: Feed system motorized adjustment brushless and toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm. Carbide blade diameter 500 mm. Motor power 7.5 kW Cutting speed per minute up to N°100 Minimum bar length mm.550 Minimum bar width mm.40 min. Workpiece thickness 15 mm Further options on request