Condition: used, Year of construction: 2008, Underfloor painting system with return air ceiling and heating coil. Exhaust air unit, air volume: 6,000/3,150 m³/h. Motor: 2.7/0.7 kW. Supply air unit, air volume: 7,300/3,650 m³/h. Motor: 0.46/2.2 kW. Heater: PWW 80/60°C / 84 kW. Storage location: Nattheim De Ia S Asvwaukshnjut

Condition: used, Year of construction: 2016, Working dimension X: 3.100 mm Working dimension Y: 1.560 mm Working dimension Z: 170 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis BIESSE Torque C-axis: Yes Tool clamping system: HSK-F63 Tool changer positions: 22 Disc tool changer: Yes Pickup tool changer: Yes Vertical drilling spindles: 10 BIESSE Drilling aggregate BH 10: Yes Gantry machine: einseitig angetrieben Machine table: Matrix table Pendulum machining: Yes Multi-zone vacuum: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Suitable for nesting: Yes Labelling: Yes, manually Safety device: Light barrier, Bumper Do Ia S Ajv A Ainehnjut Interface for .dxf data: Yes Tool charge measurement: Yes Automatic lubrication: Yes Control cabinet cooling: Yes Remote control: Yes Control: BIESSE BH 660 Software: BIESSE B_SOLID Conformity marking: CE mark, EAC mark Total connection: 23 kW Weight: 3.600 kg

Condition: good (used), GF Milling machine with feed cast jaws Suva protection Ds Ia Ssi Hgxxe Ahnjut

Condition: good (used), Year of construction: 1991, Functionality: fully functional, cutting length (max.): 2,800 mm, cutting width (max.): 1,000 mm, table length: 2,800 mm, overall weight: 1,100 kg, pivoting range: 45 °, power: 5.5 kW (7.48 HP), Equipment: motor brake, scorer, ALTENDORF panel saw, type F45 with scoring unit and 2800mm sliding table, tilting up to 45° Duj Ia S Ahowd Nazenjt

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; The machine is supplied with an assortment of sanding belts; De Ia Sowgc D Se Ahnsut A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: used, Year of construction: 2011, BIESSE SKILL 1536 G FT Numerically controlled machining centre Description; Working fields: X = 3765 mm; Y = 1585 mm; Manual lubrication system 2 back stops equipped with pneumatic system + 1 left side stop3 front stops + 1 left side stop Vacuum system Electrospindle 13,2 kW (17,7 HP) ISO 30 Flange for the assembly of aggregates on an electrospindle Prearrangement for the assembly of a 360° operating unit (C Axis) 4 outlets air blowing unit Revolving tool changer with 12 places NON EC safety devices including 1 safety mat and low fence 1 7000201 Automatic lubrication system 1 7550008 Presetter for the measurement of the tool length with diameter up to 130mm 1 7022181 CE Safety devices according to Directive 2006/42/CE for base machine 1 7300969 250 m3/h rotary vanes vacuum pump 1 AC150307 Cable tray at rearside 1 7250165 ISO 30 Aggregate for sawblade with maximum diameter: 215 mm 1 7530075 Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine 1 7530333 Biesse FoldingEntry-level software module for folding Duj Ijv Tb Scja S Ahnst (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Ds Iaswhr Nms S Ahneut

Condition: excellent (used), Year of construction: 1993, Functionality: fully functional, filter area: 73 m², type of input current: three-phase, volume flow: 5,298 m³/h, intake manifold diameter: 250 mm, nominal power: 5.5 kW (7.48 HP), Schuko Bagging System Year of manufacture: 1993 Number of fans: 1 Due Iajwhx Dko S Ahnet Main motor: 5.5 kW, 12 A, 380 V Flow rate: 5298 m³/h Speed: 2880 rpm Filter area: 73 m² Filters: 40, 230 mm diameter, 2000 mm length Automatic shaking system - fire hose connection Including documentation and control system Tap nozzle diameter: 250 mm Including piping

Condition: used, Year of construction: 2017, Working dimension X: 8.500 mm Working dimension Y: 2.600 mm Working dimension Z: 150 mm Number of milling spindles: 2 Do Ia S Ajwfgzfjhnjut Main motor power: 15 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 25 Disc tool changer 24-fold: Yes Pickup change place: Yes Vertical drilling spindles: 8 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pin system Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Outfeed: belt conveyor Safety device: Bumper Chip conveyor: Yes Control: SIEMENS SIMATIC HMI TOUCH, SIEMENS SINUMERIK PCU 50 Conformity marking: CE mark Space requirement Length: 14,5 m Space requirement Width: 9,4 m

Condition: new, Year of construction: 2020, Output: 10 layers/min. Thickness min./max. 17-120mm De Ia S Ahswhnybsnsut Width min./max. 70-280mm Log length: 2.5-7.2m Fully automatic stacking machine Cross conveyor Drive-over separator Quality conveyor Cross-cutting Stacking machine Automatic batten placement Package conveyor

Condition: used, Year of construction: 2007, machine/vehicle number: 99.467.30, Bandanzahl : 1 max. Arbeitsbreite : 1350 mm 1. Band : Kombiaggregat Dj Iswf Styoa S Ahnout Ausführung 1. Walze : genutete Stahlwalze Schleifschuh 1. Aggregat : 22 mm Einzelglieder Materialdickenmesseinrichtung : Ja Elek./pneu. Bandoszilation : Ja Einlasshöhe : variabel (unterer Tisch verfährt) Tischhub : elektro-motorisch Gewicht ca. : 1600 kg Absaugdurchmesser : 180 mm

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K De Iajwhr Ezo S Ahnjut

Condition: used, Year of construction: 2021, Flow rate: 7.697 m³/h Intake socket: 250 mm Filter surface: 50 m² Number of collection boxes: 2 Underpressure: 3.875 Pa Length of filter hose: 2.000 mm Main motor power: 11 kW Machine recognition: Yes Extinguishing automatic: Yes Air system: Underpressure Automatic cleaning: Jet- cleaning Duj Ia Sowfgwgs Ahnet Category of filter material: H3 Declaration of CE-conformity: Yes Conformity marking: CE mark

Year of construction: 2008, Condition: used, Logs 2.5-5.4 m Diameter 8-78 cm Feed rate up to 130 m/min. 2 x HOLTEC infeed units 2 x HOLTEC singulators Due Ia S Aswhnqaehnet 2 x HOLTEC step pushers 2 x HOLTEC cross-cut saws 2 x root reducers (BZ WRP Star / Bruks) 6 x HOLTEC log runners / V-roller tables 2 x debarkers (Nicholson A8 31" and Nicholson A5 22") 2 x splinter detectors (Medetec)

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Dj Iaewhr Euo S Ahnout

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Do Ijwhr Enja S Ahnout

Condition: used, Year of construction: 1999, Main saw motors 18 kW each Scoring saw motors 2.2 kW each Collet opening: 130 mm Saw feed forward 5 - 125 m/min Saw feed return constant 125 m/min Cutting length rip saw: 2500 mm Cutting length cross saw: 1600 mm Collets rip saw: 4 Collets cross saw: 7 Stack height of lifting table when installed at floor level: max. 680 mm Lifting table 2500 x 1600, payload 7 tons Cross saw output 2 air cushion tables 2160 x 650 mm Intermediate table for thin panels 25/16 Main saw blade HM 450 x 4.8 x 60 Scoring saw blade HM 180 x 4.8-5.8 x 45 "Power-Loc" quick-clamping device for HS "Power-Loc" quick-clamping device for VS Storage location: Customer Ds Ia S Ahowhr Ehsnout

Condition: used, Year of construction: 2023, Only 466 operating hours, including cross-screw discharge and automatic magnetic separator. Drive power: 18.5 kW. Throughput: 350 - 600 kg/h. Hopper: 990 x 990 mm. Screen: 30 mm. Blades: 27. Chopper dimensions: 1050 x 1500 x 1710 mm. Chopper weight: approx. 1700 kg. Storage location: Customer. Duo Ia S Ahjwhr Amsnet

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Storage Location: Supplier Due Ia Sewhrvto Ahnet

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Duj Iewhrvmsa S Ahnot

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Storage location: Customer. Dus Iowhrvgja S Ahnet

Condition: used, Year of construction: 2001, Max. cutting width: 4300 mm Max. cutting height: 2200 mm Sawblade diameter: 300 mm Max. processing thickness: 80 mm Sawblade bore: 30 mm Measuring system: scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Approx. weight: 1200 kg Dimensions: 5300 x 1200 x 2900 mm Motor power: 5.5 kW Storage location: Nattheim Dj Ia S Ajwhrvashnout

Condition: used, Year of construction: 2022, Oscillating cylindrical grinder from hnische specifications. A possible screw variant for spindle sleeve clamping. It is used somewhat similarly to the ProLoc device. Do Ia S Aewhqprehnout Storage location: Customer

Condition: used, Year of construction: 2022, Oscillating cylindrical grinder from hnische specifications. A possible screw variant for spindle sleeve clamping. It is used somewhat similarly to the ProLoc device. De Ia Sjwhqplj Ahneut Storage location: Customer

Condition: used, Year of construction: 1998, Working width: 500 mm Speed: 5,000 rpm Maximum chip removal: 8 mm Suvamatic cutter block guard Weight: approx. 1,000 kg Dimensions: 2,850 x 850 x 1,110 mm Duo Ijwhqn Usa S Ahnst Storage location: Supplier