Condition: used, Year of construction: 1981, Roller diameter: 800 mm, maximum blade length: 5600 mm, minimum blade length: 5450 mm, maximum cutting height: 500 mm, maximum cutting width: 780 mm, table tiltable: Yes, column side: left, automatic motor brake: Yes, saw blade guide position: top and bottom, saw blade guide: roller guide, design: stationary, working height or feed table height: 950 mm, weight approx.: 720 kg, dimensions: 1480 x 900 x 2440 mm, motor power: 4.0 kW, extraction diameter: 125 mm Storage location: Nattheim Dolitovvkmnongtout

Condition: used, Year of construction: 1973, With a left-hand circular saw that can be swiveled to 45°. Cutting size: 2200 x 2500 mm. 3 motors, each with 4.5 kW. Both cross-cut saws can be swiveled to 45° - 90°, each with a scoring motor. All three saws can be driven up to 400 mm in diameter. Minimum cutting width: 210 mm. Both scoring saws are pneumatically displaced forward and backward. With vacuum suction cups for panel securing. Dujlitngsvvkm Ijtot Storage location: Nattheim

Condition: used, Year of construction: 1973, Storage location: Nattheim Duslijvvkt Uetngtjt

Year of construction: 2018, Condition: used, Effective flow rate: 660 L/min. Motor: 4.0 kW. Max. pressure: 10 bar. Tank capacity: 270 L. *Compressor only. Storage location: Nattheim Dujlisvvkhrotngtet

Condition: used, Year of construction: 1996, Vacuum system with rotary valve. Nominal flow rate: 12,500 m³/h. Filter area: 62.5 m². Weight: 1,350 kg. Maximum vacuum: 4,000 Pa. Maximum air pressure: 8.5 bar. Duslitngevviygotet Storage location: Customer.

Condition: used, Year of construction: 1997, 4-axis machine with 18 kW water-cooled main spindle. HSK F63 chuck X = 4750 mm Y = 1250 mm Z = 200 mm. Maximum speed: 18,000 rpm. 12-station X-axis grooving saw. 4-station drilling head in a 17-spindle spindle. Central lubrication. 17 vertical drilling spindles, completely renewed in 2019. Smooth table. Positioning aid. Stop rows. Pendulum machining. 2 vacuum pumps. All plug-in cards for the control system replaced in 2022. WoodWOP 4.0 tools. Optional: lock case cutter unit, door hinge drilling unit, saw blade unit, 4-spindle unit. Very well-maintained condition. Dslievvi D Ejtngteut Storage location: Customer

Condition: used, Year of construction: 2001, Max. edge band thickness: 0.2 - 12 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 42 mm Min. workpiece width: 70 mm Feed speed 1: 12 m/min Heat-up time: approx. 8 min Joining unit: Yes, with 2 milling units Automatic roll magazine: Yes Trimming shears up to: 3.0 mm Solid edge magazine: Yes Gluing: Glue pot with granulate on top Trimming saw: Yes, double trimming unit Flush trimming unit: pneumatically adjustable Chamfer and radius milling unit: pneumatically adjustable with interchangeable motors Rounding unit: pneumatically adjustable (corner rounding) Profile scraper: pneumatically adjustable Flat scraper: Yes, scanning Buffing unit: oscillating Unit display: Digital Control type: Section control/PLC Operation: Screen/PC control Extendable Roller support: Yes. Protective cover: Yes. Working height or feed table height: 800 mm. Approx. weight: 2100 kg. Dimensions: 5300 x 950 x 1300 mm. Motor power: 12 kW. Storage location: Customer. Dujliovvkdaotngtjt

Condition: used, Year of construction: 1988, Working width: 1100 mm, 2-belt machine Storage location: Nattheim Delijvvkkgstngtsut

Year of construction: 2021, Condition: used, Air flow rate: 900 l/min. Air flow rate: 54 m³/h. Maximum pressure: 16 bar. Air connection: 1/2. Power consumption: 0.18 kW. Dimensions: Length: 325 mm. Width / Depth: 430 mm. Height: 445 mm. Weight: 24 kg. Delitngsvvkhxotout Storage location: Garbsen

Condition: used, Storage location: Nattheim Dolitevvkrdongtout

Condition: used, Max. blade length: 5600 mm Roller diameter: 800 mm Max. cutting height: 520 mm Max. cutting width: 770 mm Table tiltable: Yes Stand side: Left Stop ruler: Yes Saw blade guide: Roller guide Design: Stationary Weight approx.: 800 kg Dolisvvkmuotngtout Storage location: Nattheim

Condition: used, Year of construction: 1994, Design: swiveling Swivel angle forwards: + 45° Swivel angle backwards: -10 degrees Table length: 2500 mm Table width: 870 mm Extendable frame support: Yes Number of speeds: 5 Speeds: 3000/4500/6000/7000/10000 rpm Speed selection: Belt shifting + pole switching Speed display: LED Cone of the milling spindle: with 25 pneumatic interchangeable spindles Clamping length of milling spindle: 120 mm Diameter of milling arbor: 30 mm Material of stand: steel Control panel position: above Height adjustment of spindle: electric Swivel adjustment of spindle: electric Spindle locking: manual Spindle brakes: yes Extraction diameter of milling stop: 120 mm Extraction diameter of machine: 120 mm Spindle direction: left/right Motor power: 5.5 kW Electric axes: Spindle height & swivel Table opening closing: Insert segment Stop jaw design: Aigner stop system Stop adjustment: Motorized Milling jaw adjustment: Manual Feed mechanism: Yes Feed adjustment: Fixed speeds Feed: 4 rollers Weight approx.: 1000 kg Dimensions: 2500 x 1500 x 1400 mm Dsliovvkufjtngteut Storage location: Nattheim

Year of construction: 2003, Condition: used, Compressor with refrigeration dryer, tank, and condenser SK 26: Rated power: 15 kW Motor speed: 3000 rpm Maximum operating pressure: 10.0 bar Tank: 495 L, year of manufacture: 1980 TC 44: Refrigerant: R134a Capacity: 1.220 kg Maximum operating pressure (refrigeration system): 18 bar Maximum operating pressure (air system): 16 bar Rated voltage: 240 V/1/50 Hz Rated current: 7.2 A Total operating hours: 104,257 h Load hours: 51,949 h Dolitnovvkh Esgtsut Storage location: Nattheim

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground ball screws of the highest precision class. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. Such characteristics are important for ensuring balanced movement even in more complex tasks. The movement of the various axes is controlled by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters that can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different P Delitnovvi Nzsgtsut

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Dujlitngovvi N Iotot

Condition: used, Year of construction: 2018, Incl. tool / without angular gear Machining area: Travel of the axes: X=4000 mm Y=1670 mm Z=500 mm Working area: X=3300 mm Y= 1250 mm Z=250 mm Passage height C-axis / fourth axis 0-360° for milling spindle 4-way linear tool changer, traveling in X / changing station for 4 tools / units Milling spindle 12 kW HSK 63 / 24000 rpm Automatic central lubrication 12-way linear tool changer Drilling head DH 16 4H 2S Vertical 12 spindles: 7 spindles in X direction and 5 spindles in Y direction Horizontal 4 spindles: 2 spindles in X direction and 2 spindles in Y direction Pre-stroke = 70 mm, max. drill length = 70 mm and shank D=10 mm 2 Grooving saws - each in X and Y directions, max. saw blade diameter 120 mm. Woodflash software. Duelitnovvi N Uegtot Storage location: Nattheim

Condition: used, Year of construction: 1979, Max. working width: 220 mm Max. working height: 120 mm Number of spindles: 8 pcs 1. Spindle: bottom Spindle diameter 40 mm Clamping length 230 mm Speed 6000 rpm Motor power 7.5 KW 2. Spindle: right Spindle diameter 40 mm Clamping length 130 mm Speed 6000 rpm Motor power 5.5 KW 3. Spindle: left Spindle diameter 40 mm Clamping length 130 mm Speed 6000 rpm Motor power 7.5 KW 4. Spindle: right Spindle diameter 40 mm Clamping length 130 mm Speed 6000 rpm Motor power 5.5 KW HL 5. Spindle: top Spindle diameter 40 mm Clamping length 230 mm Speed 6000 rpm Motor power 7.5 KW HL 6. Spindle: bottom spindle diameter 40 mmClamping length 230 mmSpeed 6000 rpmMotor power 5.5 KW Hydro shaft with counter bearing and plan jointer7. Spindle: top Spindle diameter 40 mm Clamping length 230 mm Speed 6000 rpm Motor power 5.5 KW Hydro shaft with counter bearing and plan jointer 8. Spindle: Universal spindle Spindle diameter 40 mm Clamping length 230 mm Speed 6000 rpm Motor power 5.5 KW Right/left rotation Up/down adjustment of the upper spindle: electric with feed Feed brake system: Yes Feed speed continuously up to: 6 - 36 m/min Feed roller pressure: pneumatic Feed power: 5.5 kW Feed drive: Cardan Lubricant pump: manual Max. chip removal for joining: 10 mm Driven rollers in the table: 3 Control type: button operation Dimension display spindle: mechanical numerical display Feed rollers in front of the planer: Yes Straight jointer for spindle number: 6 + 7 Spindle description: 3 driven rollers Pneumatic pressure at the bottom of the table. Feed roller before planing. Driven rollers in the table. Duelitnjvvkcvogtot Storage location: Nattheim

Condition: used, Year of construction: 1997, Maximum veneer thickness: 2.0 mm Minimum veneer thickness: 0.4 mm Composite material: Glue thread with piston heating Disc cutter: Yes, for conveying the veneer over the machine Type: Stationary Feed speed: 15 m/min Column projection: 620 mm Working height or feed table height: 90 mm Machine number: Approx. weight: 42 kg Dimensions: 700 x 350 x 400 mm Duslitngjvvi Udotjt Storage location: Nattheim

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Duelevvi Rfoitngtet

Condition: used, Year of construction: 1998, For stationary form milling of head edges on soft and postforming workpieces. As well as for erasing on thick PVC edges on rectangular workpieces and multi-sided machining of symmetrical and asymmetrical soft and postforming profiles, this is possible after manual profile depth adjustment. The motor is manually controlled by scanning on the workstation. Equipment: - Workpiece stop system - Pneumatic clamping cylinder - 1 0.8 kW milling motor, continuously adjustable up to 27,000 rpm, equipped as standard with a radius cutter R=3. Scanning is performed by a guide ring on the workpiece. - Unit guide on precision circular guides. Specifications: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Milling tool: Radius cutter R 3 Electrical connection: 230V / 50Hz / 1Ph Total connection: 0.8 kW Pneumatic connection: 6 bar Space required: approx. 740 x 460 x 500 mm Net weight: approx. 45 kg plus base Duelitnsvvkgbsgtet Storage location: Nattheim

Condition: used, Year of construction: 1992, Storage location: Nattheim Dslitngovvkl Djtsut

Condition: used, Year of construction: 2001, with return Dujlitnsvvkdgjgtet Storage location: Customer

Condition: used, Year of construction: 1996, ALKO clean air filter system with fan, type UF 2. Nominal flow rate 10,000 m³/h. Filter area 50 m². Weight: 845 kg. Nominal pressure 4,000 Pa. Air pressure/connection max. 8.5 bar. Frequency control. Filter system with container and discharge system. (Prepared for connection to a briquette press). Return air duct included. Filter size approx. 3,000 x 1,250 mm. Total area approx. 4,000 x 1,250 mm. Good general condition. Storage location: Customer. Duolitnsvviymogtot

Condition: used, Year of construction: 1999, Storage location: Nattheim Duolovvi Rxoitngtst

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Dslovvi R Ejitngtout Storage location: Nattheim