Used Pasteurizers for sale (171)

Condition: new, Water content 35 l Material 1.4301 / AISI 304 Weight 150 kg Height 1 400 mm Width 500 mm Length 750 mm Electrical protection 50 A Gtjdpfxed Hrpmj Aadsu Connected load 400V 50Hz (3 phases) Electrical power 27 kW Nominal rating l/h 300 l/h

Condition: used, Spray pasteurizer Belt width: 150 cm Gtedpfx Aajxpaiusdju Belt length: 1000 cm

Year of construction: 2017, condition: as good as new (ex-display), Pasteurizer “H&G” is designed for pasteurizing beverages by their rapid heating to a predetermined temperature, holding for a predetermined time and then cooling. Thermal process reduces the number of microorganisms and as a result increases the shelf life. Capacity from 800 till 50 000 l./hour; Product: beer, wine, juices, sugar syrup, carbonated and juice containing drinks; Heat source: steam; electricity; hot water; Cooling source: water; propylene glycol, alcohol solution, saline solution. Material: stainless steel AISI 304, AISI 316L, AISI 316Ti, AISI 321. - Automatic temperature control; - Temperature recorder; - Automatic shutdown in emergency situation; - Ability to store and configure the previously defined parameters; - Ability to transmit data and remote access via modem Gsdpfxehy Nyfs Aadotu

Year of construction: 2017, condition: as good as new (ex-display), Designed for thermal treatment of the product in the packaging (glass bottles or cans), to increase its biological stability. Capacity from 12000 till 50000 bottles or cans/hour; Product: beer, kvass, juice, wine, carbonated and non-carbonated drinks, vegetables, and canned foods. Gjdohy Nyiepfx Aadjtu

Year of construction: 2018, condition: used, 2018 HERMIS Tunnel pasteurizer for middle breweries. Gtedpfjhy Nxzox Aadeu Designed for thermal treatment of the product in the packaging (glass bottles or cans), to increase its biological stability. Capacity from 2000 till 12000 bottles or cans/hour; Product: beer, kvass, juice, wine, carbonated and non-carbonated drinks, vegetables and canned foods. 1 Whole process of pasteurization is fully automatic. 2 Registration of pasteurization parameters (temperature and time); 3 Water exchange system between heating and cooling zones. 4 Effective and an independent spraying system in each zone. 5 Active container feeding system. 6Overload protection system.  System of collection and return of condensate.  Automatic monitoring and adjustment of PU;  System of opening and fixing of the upper lids allows easier access and simplifies the cleaning.  Alarm system.  Creation of “recipes”;  Remote access via modern and the data transfer.

Year of construction: 2023, condition: new, Specifications: - Performance: 800 L/h (From 20°C to 80°C) - Electric demands: 1 kW, 230 V, 6 A, monophase - Heat performance: 80 kW - Fuel: propane, PB, gas Gtedpfsfhb Iisx Aadeu - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750x1900x1170 mm - Weight: 380 kg - IP65 certified electronics - Heat exchanger: soft water - Connections: DN 25 - Flue gas discharge: 110 mm diameter manifold - Thermometers: 2 pcs - With automatic by-pass valve - Automatic heat control - very easy to clean - Automatic operation - flowthrough type - With 4pcs vibration-free feet - It requires minimal maintenance Available options: - Two filler superstructure: +6000 EUR - BB top 180 semi-automatic BiB filler - 6 head bottle filler - puffer tank with level switches Equipment: Sponge balls for cleaning

Condition: used, Year of construction: 2025, New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc. Applications: - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products. - Cheese Production: Used before cheese-making to ensure safety. - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream. Advantages of Batch Pasteurisation: - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations. - Flexibility: Suitable for small batches or varied products and recipes. - Quality Control: Allows for greater control over the pasteurisation process. Volume capabilities (litres): 300 Control panel: Stainless steel Control box, Controls, Thermometer Controller, ON/OFF Agitator, Chart Recorder; ; Heating options: Heating Elements, Hot Water and Steam Milk pasteurisation: 68-75c Max temperatures: 95c Cooling options: Connection to Ice Bank and Circulation Cold water through the Jacket; Plate Cooler Connection on the Outlet; Heating time: Between 30m-1hr for BPT100 to BPT500 Series With Heating Elements; BPT600 -BPT2000 Heating by HOT water or Steam; Gjdpsxl N H Uefx Aadstu Cooling time: 30min to 45min Depending on Cooling Temperatures; Plate cooler at 30min Standard; Structure: Stainless steel 316L & 304 Triple Jacket with Insulation; ; Agitation: Slow Agitation with double props at two diferent levels; High Shear mixing for Ice Cream; Cleaning: Spray ball internally for even cleaning by circulation of Hot water and chemicals used in the food industry; ; Automation: We offer Full automation on our batch Pasteurisers that cover the full circle of heating down to cooling; Additional Costs will be added for automation; Openings: Two Up Folding Covers for Easy Cleaning and Inspection; ; Product outlet: DIN40-DIN50 On semi cone to make sure all product flows out; ; Uasege: Milk Pasteurisation/ Ice Cream Mixing/ Ice Cream Fermentation/ Sauces/; ; Lead time: 5-8 weeks from Order Delays may apply during COVID 19; ; Finance Available: Pay Monthly, Ask For A Quote

Condition: refurbished (used), The MALLDISON milk pasteuriser with a capacity of 1000 liters per hour is typically designed for efficient processing of milk, ensuring safety and preservation of quality through pasteurization. Here are some key features and aspects you might find relevant: - Functionality: The machine heats milk to a specific temperature for a set period, killing harmful bacteria while preserving essential nutrients. - Capacity: With a processing capability of 1000 liters per hour, it's suitable for medium to large dairy operations, allowing for high volumes of milk to be pasteurized quickly. - Design: Many pasteurisers feature a stainless steel construction for hygiene and easy cleaning. They often have insulated heating chambers to maintain temperature efficiently. Godpfx Ajxzxwhsadetu - Control System: Modern machines often come with digital controls for precise temperature and timing adjustments, improving the reliability of the pasteurization process. - Safety Features: Look for built-in safety systems that can prevent overheating or pressure build-ups, ensuring safe operation. - Efficiency: The design often focuses on energy efficiency to reduce operational costs associated with heating. Divert Valve: Included Construction: Fully stainless steel skid amd stainless steel parts for the product Chart Recorder: Digital with Latest upgrade and test report in 2025 Balance Tank: Included Product Pump: Included Hot Water Pump: Included Heating: Self Heating with Built in Electric Elements Temperatures: Temperatures : 4-45-55-65-78(72) and out at 4 c Connection for Separator in line connection to Homogeniser Capacity: 500-1,200 L/h Available: Immediately

Condition: used, Year of construction: 2008, The Fischer milk pasteuriser 5000 is an industrial-grade machine designed for pasteurizing milk on a large scale. Here are some details about such a pasteuriser: Gsdpfx Aox Tdausadetu - Capacity: The "5000" typically indicates that this pasteuriser can handle up to 5000 litres of milk per batch, making it suitable for large dairy processing operations. - Functionality: The pasteuriser is designed to heat milk to a specific temperature, holding it there for a required amount of time to eliminate harmful bacteria and pathogens while preserving the milk's quality and nutritional value. - Construction: Fischer machines are commonly made from stainless steel, ensuring hygiene and durability. The materials used are designed to withstand high temperatures and pressures encountered during the pasteurization process. - Design: It often features an insulated design for energy efficiency and may include a user-friendly control panel for monitoring and adjusting the pasteurisation parameters. - Efficiency: The pasteurising process is usually continuous, allowing for high throughput, which is essential for commercial operations to meet demand. - Temperature Control: It may include advanced temperature control systems to ensure precise pasteurization, which is crucial for product safety and quality. - Safety Features: Modern pasteurisers often come with safety mechanisms to prevent overheating or pressure build-up, ensuring safe operations. - Applications: Suitable for dairy farms, creameries, and food manufacturers looking to process large quantities of milk while adhering to health and safety regulations. Capacity: 5000 Litres per hour Temperatures: 4-55-65-78(90) - 55-65-4 c Stages exchange plates : 5 Outlets: Separator / Homogeniser / De Aerator / Holding Tube DeAerator: Included Heated: Steam with Heat Exchanger and Steam Valve Positioning Balance Tabk: Included Chart recorder: In control panel Control Panel: Included Divert Valve: Included Product Pump: Included Skid Mounted: On Stainless steel Skid Hot water Pump: Included Electrical Requirements: 3 phase 400 V / 50/60 hz Cooling: Connection with old water connection Condition: Still in use Available: 3 weeks from order

Year of construction: 2003, condition: ready for operation (used), Capacity: 9350l, output: 180hl/h, max. operational overpressure: -1 to 4bar, operating temperature: 0-100°C, medium: beer, weight: 2t, with documentation, an inspection is possible, without mixing tanks and zip tanks. Gtjderl S Hxepfx Aadsu

Condition: ready for operation (used), There are two pipe pasteurisers available, including storage tank, capacity: 7000l. Gedpfxsgi Nxae Aadotu

Year of construction: 1995, condition: used, Tunnel pasteurizer, make Simonazzi, type: Vesuvio 640, in stainless steel, up to 36.000 bph, with 6 zones, with plastic chain, steam heated, width: ~4.000mm, length ~14.000mm, built 1995, in 2003 overhauled by Brewpack, control cabinet in s/s, pasteurizer dismantled and stored Gtodpfx Aol Slyzsadou

Condition: good (used), Corema Euromix120 Pasteurizer Serial: 1150 Gsdpfxsqnvcks Aadstu 2006, The Euromix120 Pasteurizers for variable mix quantities use a special thermoconducter liquid. The pasteurization cycle is always rapid (less than 2mins) and times vary to the quantity of mix, mix per cycle 15 - 120l, mobile, 3Ph

Year of construction: 2026, condition: new, The pasteurizer PRO-1000 is a device designed for the thermal processing of fruit juices and unfiltered musts after pressing. Technical data: Construction material: AISI 304 stainless steel Power supply voltage: 400 V Connected load: 3 kW Thermal power: 110 kW Capacity: 1000 l/h Adjustable pasteurization temperature: up to 90 °C Pump with flexible impeller PLC HMI (Unitronics) with process visualization Automatic cleaning – program function Cleaning using rubber balls Hot water system – non-pressurized Dimensions (mm): 1800 × 1800 × 1800 Weight: 600 kg Gsdstyvyfjpfx Aadstu

Year of construction: 2012, condition: used, pasteurizer with pipe heat exchanger 600 l/h (up to 80°C) with automatic control Gtodpfo Hnnhsx Aadou storage tank for BiB with level control BaginBox filler with flow meter oil boiler 50kW mounted on braked trailer with tarpaulin max. weight: 1350 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Cheese vat / Pasteurizer / Process tank 100 liters. Used - 3.5 years old Gtodpfswg Ellex Aadou The Vat: - Completely stainless steel - Double jacket (bain-marie) + insulation - Must be operated without pressure - 100 liters - Butterfly valve, NW 50 - Agitator mounted on the lid and easily removed using a quick-change adapter. - Agitator rotates slowly; approximately 24 RPM - 400 volt / 8.4 kW heating (16 amp plug). Heating power can be halved with a switch (8.4 - 4.2 kW). Control: - Digital milk temperature display - PID controller / thermostat - Control system with one automatic program (heating - holding - cooling) and manual operation (manual heating and manual cooling with cold water) - Heats up to 90°C - Cooling with cold water. Water inlet with motor-controlled ball valve.

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 35/1997, Beer pasteurizer - Heat exchanger Gjdpfx Aaoquuxuedjtu Manufacturer APV TYPE / Year 35 / 1997 Capacity 8000 Kg /h Working Pressure 16 bar Max working temp 95 *C

Condition: used, Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again. Capacity: 350 hl/h Gedpfxexbn Uce Aadjtu Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement Features: 1x plate heat exchanger, 1 tube heat exchanger, 1x hot water pump, 2x beer pump

Condition: used, Year of construction: 1978, Pasteurising chamber Length: 1,7 m Width: 1,7 m Height: 2,7 m Gjdpfx Ajw Tmugjadstu Weight: 2 t Material: stainless steel

Condition: used, Year of construction: 1996, Chamber pasteuriser for 4 pallets Gtodpfowrbdujx Aadou Additional title: Pasteuriser for 4 pallets Pallet spaces: 4 pieces Length: 530 cm Width: 220 cm Height: 305 cm Material: stainless steel Position: free standing

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Gtedpfevcqy Usx Aadju Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: used, Year of construction: 2017, Overview This complete filling line for beverage cans was manufactured 2017 by the german manufacturer KHS.  The line is designed for beverage production, handling up to 25,000 b/h and is in a good condition.    Technical Data Capacity: 25,000 bph (at 0,5L) Filling product: carbonated soft drinks and beer Bottle Formats: 500ml 211/202 Cap Formats: 211/202 Packaging formats: tray with foil Application: CSD + beer condition: good technical condition, dismantled   Scope of Delivery Bulk can depalletizer | LINKER | DPG-500 | 2012 Can inspection | TransTech | Hysek CanCheck | 2012 Can conveyor | LINKER / KHS | Conveyor RC | 2012 Rinser | LINKER / KHS | Triplex Rinser TR | 2012 Flash pasteurizer | KHS | Innopro 140/14/85 | 2012 Filler | KHS | Innofill Can DVD | 2017 Seamer | Ferrum | F08 | 2012 Lid feeder | NSM | Lidserver A30 | 2017 Conveyor | KHS | Innoline BTR | 2012 Filling height control | KHS | Innocheck CUB | 2012 Blowing | Europool | – Packing machine | KHS Kisters | SP0502 | 2012 Pack conveyor | KHS | Innoline GTR | 2012 Handle application | KHS | CSM 050-2 | 2012 Packing machine | KHS | Innopack 035 B2 + FS A-L | 2012 / 2017 Palletizer | KHS | Innopal PBL1N1 | 2012 Stretcher | SIAT | MFP | 2017 Pallet conveyor | KHS | Innoline PTR Godoyb R Srspfx Aadotu

Condition: used, Year of construction: 2001, Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc Gtjdovdd Uuopfx Aadsu

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Gtjdpfx Aaovptt Rjdeu

Condition: used, Year of construction: 2007, Overview  The offered filling line for returnable glass bottles is composed of a selection of high-quality machines, chosen by BEVMAQ. Most of the machines were previously used in breweries in Germany. The condition of the machines is good, as they have been regularly maintained and continuously serviced. Apart from some of the machines, the majority has been dismantled by a German partner company and are now stored in a warehouse. The line layout can be adapted to the customer's needs and his plant layout, as the conveyors will be new or refurbished. Tech Specs  Capacity: 40,000 bph at 0.5 l bottles Suitable: Carbonated water and soft drinks Beer / Beer Mix recently serviced, regularly maintained Formats processed: 330 ml  500 ml YOM: ranging from 2007 to 2016 The Line in Detail Crate Depalletizer | Krones | Pressant Duplex | 2011 Includes safety fences, conveyors, offloading table Decrater | Krones | Linapac II | 2012 Machine can work as crater and decrater Bottle Washer | Krones | Lavatec | 2013 Crate Washer | Klotzki | 2011 Empty Bottle Inspector | Miho | David 2 | 2016 Counter Pressure Filler + Capper | KHS | Innofill DRS | 2013 Fill Level Inspection | KHS | 2013 Includes bottle rejection system and conveyor belt Tunnel Pasteurizer | Krones | Linaflex | 2013 Cold Glue Labeller | Krones | Topmodul | 2015 Includes a module prepared to work with seal label With servo driven bottle orientation Crater | Krones | Smartpack | 2011 Crater Palletizer | Transpak | NEW Bornbinder | Born| - | NEW Mixer | Famix | 30,000 - 2K | 2008 Flash Pasteurizer | GEA | 25,000 | 2007 All pallet, crate or bottle conveyors will be individually adapted to the plant design, manufactured in KHS/Krones standard. Necessary format parts for bottle, label, crate and cap handling can be supplied. Gedpfjxf D Dbjx Aadstu