Used drilling and milling for sale (125)

Condition: new, bore capacity in steel (diameter) 13,0 mm x-travel 300 mm y-travel 130 mm Bljdsxabb Hepfx Al Aon turning speeds 100 - 2500 U/min throat 165 mm spindle taper MT 3 MK table-size 490 x 120 mm diameter of hob 30,0 mm motor 230 Volt total power requirement 0,75 kW weight of the machine ca. 50 kg. dimensions of the machine ca. 520x500x740 mm Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key

Condition: new, Year of construction: 2026, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milling and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally. Rigid, sturdy cast iron Autofed spindle Milling machine height adjusted on the support, not on the column Additional flood coolant system Rigid cross table with precisely ground surface Dovetail-shaped guides Quiet work due to the ground gears Left/right rotation Blodsvxth Hepfx Al Aen +/- 90° rotary head Adjustable head height Base available optionally Technical data Steel drilling efficiency 32 mm Cast iron drilling efficiency 45 mm Frontal mill diameter 80 mm Arbor mill diameter 28 mm Spindle speed 50–3024 rpm (6/12) Arbor chuck MK4 Spindle feed 110 mm (automatic feed) Worktable dimensions 820 mm×240 mm Maximum distance from spindle to table 475 mm X-axis longitudinal travel 550 mm Y-axis transverse travel 170 mm Left/right rotary head 90° Motor power 1.3/1.8 kW Power supply 400V Weight 360 kg

Condition: used, Year of construction: 1971, Technical details: max. diameter of face turning: ca. Ø 900 mm revolution per minute: Spindel: 12,5 - 00 / 24 step U/min revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / step rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Movement of the face slide 180mm largest Ø during facing approx. 900mm Bljdpfx Aeu Idtpjl Ajn Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with speeds Equipment: optical fine measuring device/measuring system for axes X/Y/Z/B-axis hydraulics machine feet/footplates control panel with boom *

Condition: new, Year of construction: 2026, The drilling and milling machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. The machine is available from stock. Machine characteristics The machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be fitted to it. HEAVY, STABLE CAST IRON THE HEIGHT OF THE ROUTER IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN SOLID CROSS TABLE FOR THE MILLING/DRILLING MACHINE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION OPTIONAL HEAD +/- 90 degrees ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra - 200€ Technical data MAXIMUM DRILLING SIZE 45 mm MAXIMUM FACE DRILLING 80 mm MAXIMUM FACE MILLING 28 mm MAXIMUM THREADING 12 mm SPINDLE PASSAGE 120 mm SPINDLE TAPER MT4 SPINDLE SPEED (6 MOTOR SPEEDS 1400r/min ) Bledpfxjud H Huj Al Asn 95,170,280,540,960,1600min-1 MAX. DISTANCE FROM SPINDLE TIP TO TABLE 475 mm DISTANCE FROM SPINDLE TO COLUMN SURFACE 260 mm WORKING TABLE DIMENSIONS 820 x 240 mm TABLE TRAVEL 550 x 170 mm MOTOR 1,1kW / 1,5hp Voltage (two options to choose from) 400V (three-phase motor) PACKING DIMENSIONS 1140 x 800 x 1040 mm NET WEIGHT 270 kg Available accessories MK4/B18 drill chuck shank handy tools Drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 instruction manual in Polish

Condition: new, Year of construction: 2025, functionality: fully functional, Table size 800 x 240 mm Table area 730 x 210 mm “T” slot size on table 14 (M12) Speed ​​range 75 – 3200 rpm Drilling capacity in cast iron 45 mm Drilling capacity in steel 32 mm Longitudinal movement range (X) 560 mm Transverse movement range (Y) 190 mm Vertical travel range (Z) 350 mm Tool holders ISO40/Morze 4 Spindle - column distance 460 mm Distance between spindle nose and table surface 445 mm Spindle stroke 120 mm Total machine height in Z upper position 1450 mm Spindle can be tilted +/-90 degrees Spindle power 1.1/1.5 / 400V Machine weight 480 kgs Bedpfx Ajxz D Npjl Asln Dimensions 1280 x 960 x 2100 mm Accessories - Thread cutting function - 3-way path measuring system - Y+Z axis covers - ISO40 drill chuck adapter - Built-in digital depth gauge - Automatic X-axis stepless feed and rapid traverse - Motorized gear lifting and lowering - Machine lamp - Cast iron machine base The machine is in brand new condition. Never used in production.

Condition: new, Year of construction: 2026, The ZX 7045E milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Bodpfeud Iztsx Al Aeln Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 400V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 30 mm x-travel 850 mm y-travel 435 mm Control HEIDENHAIN TNC 150 total power requirement 16 kW weight of the machine ca. 3500 kg dimensions of the machine ca. m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109 _____ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle taper SF 32 Spindle quill travels 210 mm Drilling Capacity approx.. 30 mm Spindle speeds steplessly adjustable 50 – 2,500 rpm Feeds steplessly adjustable 1 – 8.000 mm/Min. Quick feed 8.000 mm/Min. Spindle drive, approx. 6 kW Total electrical load 16 kW - 400 V - 50 Hz Weight, approx. 3,500 kg Accessories / Special Features: * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc. Mobile Control unit with electronic handwheel. Ideal for quick set-up and approach to the workpiece. * The quill movement can be actuated manually or also by the CNC-Control, * The Drilling depth can be presetted by a 12 fold turret drum for different quillstops and with a digital display of the values on monitor. * The complete Milling/Drilling head can be positioned in 3 different heights and with automatic clamping. * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened Bsdpfst Hxa Hox Al Asln ball screw spindles. * With quick change tool holders, chucks, millers, etc. and with coolant device. Condition : Very Good to excellent - Machine under power, ideal for small batch production Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: new, Technical specifications: Drilling capacity in steel: 40 mm Bljdpfjwhd Afsx Al Aon Tapping capacity: M 20 Spindle: MT 3 Thrust: 260 mm Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm X travel: 380 mm Y travel: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread tightening spindle - Thread cutting device - Rotatable table - Height-adjustable protective cover - Spindle guard with limit switch

Condition: new, Year of construction: 2026, functionality: fully functional, Table dimensions: 730 x 210 mm Number of T-slots: 3 Drilling capacity in cast iron/steel: Ø 25 mm / Ø 30 mm Max. face mill diameter: Ø 76 mm Max. end mill diameter: Ø 20 mm Bledpfx Aezg Hfwel Aen Table longitudinal travel: 500 mm Table cross travel: 210 mm Spindle taper: Morse taper 3 Spindle stroke: 120 mm Spindle speed range: 100 – 2080 rpm Max. distance spindle nose to table: 440 mm Motor power: 1.5 kW Weight (Net/Gross): 280 / 310 kgs Packaging dimensions: 950 x 760 x 1150 mm Equipment, Accessories - Sheet metal base - Coolant system with tank and pump - Tapping function - Machine light - Automatic feed and rapid traverse on table longitudinal travel

Condition: new, bore capacity in steel (diameter) 45 mm quill stroke 125 mm 560 mm 230 mm table surface area 800 x 240 mm spindle turning speed range 75 - 3200 U/min max. milling cutter diameter 80 mm spindle taper ISO 30 max. distance between table and spindle-nose 460 mm throat 230 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 580 Kg dimensions of the machine ca. 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Bjdpfx Aljupxrno Ajln Collet set, SK tool holder. Further machine accessories in box.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Spanien 50410 € 952.75 € 35 mm MK 4 390 mm 94- 2.225 (16) 50 Hz 113 U/min M35 1660 mm 1510 mm 2600 mm 910 kg 180 mm 190 - 650 mm 1310 mm 125 mm 400 x 420 mm 0,10 - 0,18 - 0,24 (3) mm/min 750 - 1.500 U/min Bledjynmtxjpfx Al Ajn ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools adjustable stop drill guard OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment

Condition: excellent (used), HEIDENHAIN TNC-310 Working travels 500x260x480 mm (+ spindle stroke 160 mm) cross table 880x320mm additional with Manual hand wheels Spindle speeds 100-9000 Rpm Bljdpfx Alsfrbtdj Aen Misc accessories MARCELS MASCHINEN CH

Year of construction: 1975, condition: used, Manufacturer: DABROWSKA Blsdpfx Aleb Ufgms Aon Type: BORING ROTATED TABLE & X AXIS Technical characteristics: TABLE DIMENSIONS 1600x1600mm Stroke: 1500mm ON AXIS

Condition: new, Year of construction: 2026, - Drilling and milling machine for, e.g., metal and steel construction, prototype construction, plastic processing, etc. - Machining of parts up to 3000 mm in length; longer parts can be accommodated with multiple clamping arrangements thanks to removable side panels. - SK 40 spindle mount - 7.5 kW drive power - Easy-to-use control system without requiring programming knowledge - Stepless speed control, 140 - 2000 rpm - 10-position tool changer - Thread cutting up to M24 - Tool length measurement - Handwheel - Milling, drilling, deep hole drilling, countersinking, etc. - MADE IN GERMANY Marking and conventional drilling/milling are eliminated, resulting in significant time savings for the production of individual parts and small series. - Table length: 3000 mm (2000-8000 mm possible) - Distance from table to tool holder: 700 mm - Table width: 560 mm, T-slots M 14 - Drilling diameter up to 35 mm Bededyn Tpspfx Al Asln - Front light barrier - Water cooling - Movable touch panel 19", Windows Price upon request

Condition: new, Year of construction: 2026, Milling and drilling machine of uncomplicated design warrants long-term reliability. This machine is equipped with a horizontal spindle and vertical head. XZ 6350ZB are also equipped with spindle autofeed. Machine features Equipped with vertical head and horizontal spindle ISO 40 tool mount taper Milling machine with X and Y axes feed, and rapid Z-axis setting feed Extendable vertical head spindle Mechanical feed in 3 ranges and automatic threading capability Vertical 0–90o swivel head Extendable swivel upper beam Bodevxg T Ajpfx Al Ajln Technical data Table dimensions 1270×260 mm Longitudinal table travel 750 (700) mm Transverse table travel 270 (220) mm Vertical travel from table to column 340 mm Number of T-slots in table 5 T-slots distance 50 mm Table load capacity 200 kg Vertical head swivel 90° Spindle extendable L – 120 mm Spindle taper ISO 40 Spindle mechanical feed 0.08-0.15-0.25 mm/rotation Verical spindle speed 90–2000 rpm Horizontal spindle speed 40–1300 rpm Longitudinal feed speed range 24–402 mm/min Transverse feed speed range 24–402 mm/min Rapid feed quick adjustable for Z axis Upper ram extension 460 mm Distance from vertical spindle to column 260–740 mm Distance from vertical spindle to table 100–440 mm Distance from horizontal spindle to table 0–300 mm Digital display for 3 axes Main motor power 2.2 kW Dimensions 1520×1289×2150 mm Weight 1420 kg

Condition: new, Year of construction: 2026, Machine characteristics Automatic table feed in X, Y axis: gain precision and efficiency thanks to the automatic table feed in two planes. Achieve perfect results without extra effort. Mechanical Z-axis table feed: We offer an innovative Z-axis table feed for fast and precise material processing. Reduce working time without sacrificing quality. Heavy Stable Cast Iron: The robust construction of the machine ensures stability and durability. The heavy cast iron ensures precise workmanship, which translates into accurate machining. Solid Cross Table with Precision Ground Surface: A cross table made with attention to detail, with particular emphasis on precision surface grinding. This guarantees perfectly smooth material processing. Swallow Tail Slides on All 3 Axes: Thanks to the innovative dovetail guides, the machine achieves maximum precision movement in all three axes. Achieve accurate results without compromise. Quiet Operation Thanks to Ground Gear Wheels: Work without unnecessary noise. Thanks to the ground gears, the machine runs smoothly and quietly for comfortable working. Left and Right Rotation: Adapt the work to your needs. The machine has a left and right rotation function, allowing even greater flexibility in material processing. Swivel head +/- 90°: Turn the head in any direction. The +/- 90° swivel function allows a diverse use of the machine, adapting it to different projects. CORMAK ZX 7550 CW - it's not just a milling machine, it's a tool that meets even the most demanding challenges. Order today and experience excellence in material processing! Max. drilling diameter 50 mm Max. horizontal milling length 100 mm Max. vertical milling diameter 25 mm Max. threading diameter M16 Max. boring diameter 120 mm Spindle taper ISO 40 Vertical spindle speed range and number 50Hz 115-1750 (rpm) (8) Horizontal 50Hz spindle speed range and number 60-1350 (rpm) (9) Distance between spindle and column surface 200-700 mm Distance between spindle and table 100-480 mm Distance between spindle axis and table 0-380 mm Spindle extension 120mm Table size 1000x240 mm Table travel 600x230 mm Feed of table 24-720 mm/min (8 speeds) Spindle feed rate 0.015; 0.08; 0.25 mm/rev. Number, width and spacing of T-slots 5/14 mm/44 mm Motor (vertical/horizontal) 0.85-1.5/1.5 kW Overall dimensions 1120x1060x2035 mm Blsdpfx Aleud Icqo Aen Weight 970 kg Version-dependent equipment digital readout for 3 axes SINO reduction bushings ISO 40/ Morsea Drill chuck 1 - 16 mm EC declaration of conformity machine vice L - 160 mm milling spindle with a set of collets for finger joint cutters horizontal spindle support / eyepiece long moulder spindle basic tools 24 V halogen lighting system cooling system operating manual in Polish

Condition: new, Year of construction: 2026, Invest in modernity and versatility with the ZX 7055 DRO milling and drilling machine, ideal for small to medium-sized repair and production departments. This medium-sized machine not only offers an auto-feed with vertical head, but also threading functions and digital readout as standard. Product characteristics standard readout. Discover its reliable features that make the ZX 7055 DRO an excellent choice for your workshop: Heavy Stable Cast Iron: The solid construction in heavy cast iron is the foundation for durability and precision. The ZX 7055 DRO milling/drilling machine maintains stability even during the most demanding tasks. Automatic feed: Save time and increase productivity with the automatic feed. The motorised vertical head allows efficient machining of materials without the need for constant supervision. Solid Cross Table with Precision Ground Surface: Attention to detail is a key element of the design. The solid cross table with a precision-ground surface ensures excellent flatness, which will translate into precise machining. Swallow Tail Slides: Innovative dovetail-shaped guides guarantee smooth and precise movement in three axes. Achieve perfect results without compromise. Quiet Operation Thanks to Ground Gear Wheels: Focus on the work, not the noise. The ground gears make the router-drill run quietly for a comfortable working environment. Left and Right Rotation: Adapt the machine to your needs. The ability to rotate both ways gives you extra flexibility in the machining process. Head Rotation +/- 90° and Adjustable Head Height: Adapt to different tasks with +/- 90° head rotation and adjustable head height. Achieve precise results in all conditions. The ZX 7055 DRO milling/drilling machine is a state-of-the-art tool that will redefine your material processing experience. Order today and experience exceptional performance in your workshop! MAXIMUM FACE MILLING CUTTER DIAMETER 80 mm MAXIMUM END MILL DIAMETER 32 mm HEAD ROTATION ANGLE +/- 90° SPINDLE ROTATION 75, 180, 280, 600, 1000, 1600 rpm SPINDLE FEED RATES Bljdpfoud H Thjx Al Aen 0,1; 0,18; 0,26 rpm MANDREL HANDLE MK4 SPINDLE PITCH 125 mm (automatic feed) WORKING TABLE DIMENSIONS 1000 x 240 mm TRAVERSE TABLE X/Y 670 x 185 mm WIDTH/SPACING/NUMBER OF T-SLOTS 18 mm/80 mm/3 DISTANCE FROM SPINDLE TO TABLE 90 - 460 mm DISTANCE FROM SPINDLE TO COLUMN 235 mm MOTOR POWER 1,5 kW / 2,1 hp POWER SUPPLY 400 V WEIGHT 425 kg PACKING DIMENSIONS 970 x 760 x 1160 mm Standard equipment spindle auto-feed digital readout longitudinal auto-feed of table with speed adjustment height adjustment of headstock with electric motor cooling system

Condition: new, functionality: fully functional, Drill-milling machine FM 55 HSV equipped with height adjustment of the milling head via an auxiliary motor and automatic quill feed. The basic configuration already includes all essential accessories (3-axis digital readout, power feed for the milling table, central lubrication, cooling device, LED work light, cast iron base with coolant channel, CE-compliant safety equipment), making this machine suitable for universal applications. Standard equipment includes automatic quill feed and threading mode Rapid X-axis table adjustment thanks to automatic feed with rapid traverse function Cast iron machine base ensures vibration-free operation Enhanced productivity thanks to the standard 3-axis positioning display Two-stage motor with 12 selectable speeds (75 – 3200 rpm) Versatile use – e.g. slot milling, surface milling, boring, etc. Milling head tilts both sides for angled drilling, edge milling, etc. Stability due to dovetail guideways for the gear head Dovetail guideways in the X, Y, and Z axes, adjustable via gib strips Convenient milling head height adjustment by motor Manual central lubrication for all guideways Technical specifications Max. drilling capacity: 32 mm Max. drilling capacity in castings: 40 mm Max. face mill diameter: 80 mm Spindle/column distance max.: 220 mm Spindle/table distance: 95 – 485 mm Quill stroke: 120 mm Automatic quill feed – range: (3) 0.10 / 0.18 / 0.26 mm/rev Min. spindle speed: 75 rpm Max. spindle speed: 3200 rpm Speed change – number of steps / stepless: 12 Spindle taper: MK 4 Table size – width: 800 mm Table size – depth: 240 mm Travel in X-axis: 420 mm Travel in Y-axis: 200 mm Head vertical adjustment: 390 mm Head swivel: -60° to +60° T-slots (number, size, spacing): 14 mm Quill vertical lifting motor power: 90 W Motor power: 1.5 / 2.2 kW Motor power S1 100%: 1.1 / 1.5 kW Voltage: 400 V Dimensions – width: 1270 mm Dimensions – depth: 960 mm Dimensions – height: 2120 mm Weight approx.: 447 kg Scope of supply 3-axis digital readout ES-12V LCD 3–16 mm / B16 quick-action drill chuck Drill chuck arbor MK 4 / B16 Spindle M 16 Reducer sleeve MK 4/3 Combined milling arbor MK 4/27 mm Automatic quill feed Height-adjustable safety guard Milling head lifting motor Central lubrication X-axis table feed AL 450 D LED work lamp Electronic spindle speed indicator Electronic quill stroke indicator Thread-cutting mode Slat safety guard Cooling system Longitudinal scale Cast iron base with coolant system Operator tools Blsdpfxsytdy To Al Asn

Condition: new, Year of construction: 2026, CORMAK ZX 40BPC is a solid metal drilling and milling machine. Possibility of head rotation +/- 90 degrees of spindle, possibility of head rotation +/- 90 degrees, automatic spindle feed, right and left rotation, large table, liquid cooling, automatic table feed in the x axis, powerful engine, ability to drill up to 40 mm. Rotational speed up to 2500 rpm Machine characteristics HEAVY STABLE CAST IRON AUTOMATIC SPINDLE FEED ADJUSTABLE HEAD HEIGHT MASSIVE CROSS TABLE WITH PRECISELY GRINDED SURFACE DOVtail-shaped guides QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATIONS ROTATING HEAD +/- 90° Technical data Max. drilling size (steel/cast iron) 32/40mm Face milling width 80mm End milling width 22mm Spindle extension 125mm Spindle taper MT4 Spindle speed (1400 rpm motor) 50～2500min-1 Maximum distance of the spindle tip from the table 735mm Maximum distance of the spindle tip from the base 1245mm Distance of the spindle from the column surface 272 mm Dimensions of the work table 730x210mm Base dimensions 690x520mm Engine 1.3/1.8kW Cooling engine 40W Blsdpovxhfmsfx Al Ajn Dimensions 1200x1000x1910mm Weight 440 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,500 rpm, controller model: Heidenhain TNC 310, TECHNICAL DETAILS Bjdoywgtxjpfx Al Asln X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 20-4500 rpm MACHINE DETAILS Control: Heidenhain TNC 310 Dimensions & Weight Space requirements: approx. 2.15 x 2.00 x 2.50 m Machine weight: approx. 3 t EQUIPMENT Swivelling rotary table Documentation

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Vertical movement with pallet changer (Y-axis): 880 mm Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Table rotation: 360° continuous Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Drive power: 11 kW Drive power in overload: 13.75 kW Max. torque: 200 kpm Bedpezd Rizsfx Al Aeln Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Control system: DIXI CNC 4400 Installed total power: 47 kW Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Condition: new, Year of construction: 2026, CORMAK ZX7016 is a versatile drilling and milling machine that combines compact dimensions with impressive functionality. Designed to meet the requirements of DIY enthusiasts, it is perfectly suited for precision metalworking. Thanks to the MK2 spindle taper, the machine provides exceptional stability and accuracy during operation. Additionally, the digital readout of the spindle quill extension allows full control over the process, resulting in repeatable and precise results — both in a home workshop and when supporting production processes. The machine has been manufactured in accordance with applicable European Union standards and is CE marked and supplied with an EC Declaration of Conformity. The control panel and safety systems comply with current occupational health and safety requirements. The spindle and gear cover is equipped with a microswitch, providing additional safety during operation. KEY ADVANTAGES OF THE MACHINE: Digital readout of drilling/milling depth Built-in workshop light integrated into the machine body Durable and professional construction ensuring a long service life Multifunctionality: drilling and milling capabilities in one machine Drive transmission via a reliable belt drive Spindle mounted on precision ball bearings Adjustable spindle height for different applications Through spindle with a thread for mounting work heads IP54-rated safety switch for enhanced user safety Quiet and efficient electric motor ensuring comfortable operation ✔ All mechanical components, including pulleys, are made entirely of metal for maximum durability and reliability ORIGINAL ZX7016 – PRECISION AND STABILITY AS STANDARD The machine is equipped with a solid, heavy-duty cross table, ensuring smooth and precise movement along two axes (X/Y), allowing accurate control of the machining process. A vice can be mounted directly onto the worktable (vice available as optional equipment). The cross worktable is an integral part of the machine's construction, ensuring rigidity and reliability during operation. Technical Specifications: Specification Value Max. drilling diameter 16 mm Max. vertical milling diameter 12 mm Max. face milling width 40 mm Motor S1/S6 0.55 kW / 0.75 kW Motor speed 1420 rpm Voltage / frequency 230 V / 50 Hz Table dimensions (L × W) 420 × 152 mm Table travel along Y-axis 115 mm Table travel along X-axis 230 mm Distance from column to spindle 180 mm Spindle nose height above table 155–355 mm Spindle quill travel 77 mm Spindle taper MK2 Spindle speeds 320, 400, 500, 650, 800, 900, 1350, 1450, 1800, 1900, 2700, 3300 rpm T-slot width and spacing 12 × 80 mm Weight 75 kg Note: The operating parameters provided are for reference only and may vary depending on the type of material being machined, the tool used, and its technical condition (e.g. degree of wear or bluntness). Standard Equipment Bsdpfx Aljwvhmwj Asln Drill chuck 1–16 mm Drill chuck arbor Cross worktable Basic hand tools DTR / operating manual

Condition: new, SERRMAC TCS and TC Drilling and Milling Machine (Cross Table) New, “CE” certified 3-year warranty Automatic feed High-efficiency transmission and electronic variable speed drive via vector inverter. Coolant system for cutting tools Threading via inverter, complete with digital tachometer Threaded spindle axis for CM4 tool clamping Cross table: 800 x 255 mm Drilling capacity in R50 steel: ø 50 mm Tapping capacity in R50 steel: M 26 Spindle taper: CM4 Spindle stroke: 145 mm Spindle shank diameter: 72 mm Automatic feed: 3 speeds: 0.05 – 0.1 – 0.2 rpm Automatic feed with electromagnetic clutch: 3 speeds: 0.05 – 0.1 – 0.2 mm/rev Prismatic column Cross table Inverter drive Spindle speed: 45 – 2150 rpm Motor power (380 V – 50 Hz): 3 kW “T” slot dimensions: 14 x 14 mm Cross table: longitudinal travel, manual axis X: 585 mm Cross table: transverse travel, manual axis Y: 240 mm Dimensions (h x w x d) with column: 1,986 x 1,340 x 1,280 mm Weight: 780 kg Blodpfsfh Si Uox Al Aen

Condition: new, distance between shaft and table: 470total power requirements: 2,2 kwweight approx.: 1,2messurements (LxWxH): Länge2400 mm Breite/Tiefe2160 mm Höhe2300 mm Gewicht 1200 kgspindle rotation speed: 60 4200 min¯¹ Bodpfxed H Hhzj Al Asln

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Bedpfefu Ivzox Al Aeln Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded