Used material testing for sale (489)

Condition: good (used), Vötsch Vötsch Climate Test Chamber, Air Cooled Converted to refrigerant R-452a Specifications for Temperature Tests: Temperature range: -40°C to +180°C Temporal tolerance: ±0.1 to ±0.5 K Spatial tolerance: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5: Heating: 3.2 K/min. Cooling: 3.5 K/min. Specifications for Climate Tests: Temperature range: -40°C to +180°C Temporal tolerance: ±0.1 to ±0.3 K Spatial tolerance: ±0.5 to ±1.0 K Humidity range: 10% to 98% r.h. Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm Housing dimensions: Width 780 mm x Depth 1758 mm x Height 1800 mm Electrical connection: Rated voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 4.9 kW Rated current: 9 A Hodjxbrkhopfx Ab Ujfr Refrigerant: R-452a Test chamber volume: approx. 335 liters Weight: approx. 515 kg net Important information for you as a buyer! The following actions are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Espec Type: TPC-212D Technical Specifications Test Procedure: HAST – Highly Accelerated Stress Test Model: Espec TPC-212D Internal Volume: 2x (approx. 22 liters) Internal Dimensions (ø x L mm): 2x 295 x 330 mm Temperature Range: +105 °C to +142.9 °C Humidity Range: 75% to 100% RH Pressure Range: 0.02 to 0.196 MPa gauge (0 to 28 psig) Power Supply: 220 V (±5%), 1-Phase, 50/60 Hz, 20 A Special Features: Two chambers in one device Notes: Hsdpfx Aswl D Aaob Usfr Two chambers: Allow for simultaneous tests with different parameters or larger test volumes. HAST test: Accelerated endurance test under high temperature and humidity with overpressure for the qualification of electronic components. Applications: Ideal for semiconductors, ICs, circuit boards, MEMS, etc. Weight: 230 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: excellent (used), Heraeus Vötsch Type: VCS 7018-5 Climatic Test Chamber with Humidity Control, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Characteristics for Temperature Tests: Hsdpfx Abjv N Hc Ej Ujfr Temperature Range: -70°C to +180°C Temperature Range: ± 0.1 to ± 0.5 K Spatial Range: ± 0.5 to ± 2.0 K Temperature Gradient: 1 to 4 K Temperature Rate of Change according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Characteristic values for climatic tests: Temperature range +10 to +95°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature deviation over space: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation over time: ± 1 to ± 3% RH F. Dew point range -3 to +94 °C Electrical connection: Nominal voltage: 3/N/PE AC 400V±10% 50Hz Nominal power: 10 kW Nominal current: 21 A Fuse protection: 32 A slow-blow, provided by the customer Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), RMS vibration exciter with power amplifier and cooling fan Here we offer you a RMS vibration exciter with power amplifier. Vibration exciter SW 1507 Max force 2158 N max. speed 1,3 ms Power amplifier TGA 1500 3 x 380V/ 50Hz/ 35A / 8 kVA Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you. Hedpfjgkafijx Ab Uofr Written order possible by email or fax

Condition: excellent (used), RMS Vibration test system Here we offer you a RMS electrodynamic vibration test system. RMS Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N power amplifier TGA 3000-000.00 Condition: used / used Untested! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Hfedpfxsgk I I Ts Ab Uer Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: excellent (used), Espec Type: PHP - J3 Technical data: Air-cooled Temperature and humidity range Room temperature +10°C to +100°C / 40 to 98% rel. LF Temperature fluctuation ±0.3 K Humidity fluctuation ±2.5% Volume 398 liters Dimensions: Internal dimensions: Width 600 mm x height 830 mm x depth 800 mm External dimensions: Width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current 400 VAC 8.3 A Hfedpfx Aetzbzcjb Usr Weight: 335 kg Scope of delivery: Espec climatic test chamber The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Type: PHP - J3 Hfsdpstzbz Aofx Ab Uer Technical data: Air-cooled Temperature and humidity range Room temperature +10°C to +100°C / 40 to 98% rel. LF Temperature fluctuation ±0.3 K Humidity fluctuation ±2.5% Volume 398 liters Dimensions: Internal dimensions: Width 600 mm x height 830 mm x depth 800 mm External dimensions: Width 1010 mm x height 1690 mm x depth 1273 mm Mains voltage: 400 VAC 3∅ 50 Hz Maximum current 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climatic test chamber The following information is for your safety as a buyer! The following points are carried out on our chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, PANalytical PANalytical X’Pert PRO MPD X-ray Diffractometer (XRD) Excerpt from the service report: Device: PANalytical X’Pert PRO MPD Report date: 07.07.2021 Work performed: - Reinstallation and commissioning of the system - Connection of external supply lines - Warm-up phase - Complete alignment of goniometer and additional components - Maintenance carried out, including replacement of defective parts Spare parts used: L 3.6V NC/U3 R15.0X52.0 BATTERY. NI-CD FAN FOR X-CELERATOR UNIT FILTER, WATER Motor PW3050 ("Device was not tested in-house") The X’Pert PRO MPD is a highly versatile and powerful X-ray diffractometer (XRD) designed for structural characterization of crystalline materials. It is ideal for pure research as well as routine applications in industry and academia. Thanks to its modular design, fast detection, and control of temperature and atmosphere, it is excellently suited for both routine analyses and complex in-situ experiments. Key features: - Multiple measurement geometries possible: - Reflection measurements in Bragg-Brentano (θ–2θ) mode - Transmission geometry for powders in capillaries - Optional SAXS (Small-Angle X-ray Scattering) for nanostructure analysis - Radiation source and detectors: - Typically copper anode (Cu-Kα, λ ≈ 1.54 Å) - X’Celerator detector (1D, ultra-fast) for parallel data acquisition - Modular system with PreFIX technology: - Rapid change of optics and sample stages without recalibration - In-situ measurements at high temperatures: - Measurements up to approx. 1200°C possible - Controlled atmosphere: air, nitrogen, oxygen (limited for reducing atmospheres) Typical applications: - Phase analysis and quantitative Rietveld refinement - Determination of crystallite size, microstrain, residual stress - In-situ investigation of phase transitions, oxidation, crystallization, etc. - SAXS measurements for analysis of nanoparticles and pore structures - Broad range of sample types: powders, thin films, ceramics, pharmaceuticals, catalysts, and more Technical data (typical) Property & Specification Hfjdowycatspfx Ab Usr Angle range (2θ): approx. 0.5° to 150° Step size: up to 0.002° or finer Goniometer: vertical, 0–0, radius approx. 240 mm Temperature range: room temperature up to approx. 1200°C Atmosphere: air, N₂, O₂ (limited for reducing atmospheres) Detectors: X’Celerator (1D), proportional counter Distribution & application areas: The X’Pert PRO MPD is in use worldwide at, for example: - Universities (ETH Zurich, TU Dresden, University of Vienna) - Research institutes (e.g., Max Planck Institutes, ICN2, IS2M) - Industry (e.g., materials development, pharmaceuticals, chemistry) Condition: used Scope of delivery: (See image) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: good (used), Vötsch Model: VCS 7130-10 Vötsch Climate Test Chamber, Water-cooled Specifications for Temperature Testing: - Temperature range: -70°C to +180°C - Temporal temperature deviation at the center of the usable test volume: ±0.3 to ±0.8 K - Spatial temperature deviation: ±0.5 to ±2 K - Temperature gradient: 1 to 4 K - Temperature change rate: - Heating: 11 K/min - Cooling: 10.5 K/min Specifications for Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98% RH - Temporal temperature deviation at the center of the usable test volume: ±0.2 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1 K - Temperature gradient: 1 to 2 K - Temporal humidity fluctuation at the center of the usable test volume: ±1 to ±3 % RH Technical Data: - External dimensions (with hinges and door lock): - Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm - External dimensions (without hinges and door lock): - Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm - Internal chamber dimensions: - Height: 950 mm, Width: 1100 mm, Depth: 950 mm - Test chamber volume: approx. 1300 liters Feedthroughs: - The chamber is equipped with feedthroughs on both the right and left sides, allowing measurement cables and test devices to be routed into the test space. - 1 x R1 NW 125 mm - 1 x L1 NW 50 mm Test Chamber Lighting: - Halogen bulb 24 V, 50 W Electrical specifications: - 3/N/PE AC 400V ±10% 50Hz - Rated power: 34.0 kW - Rated current: 50.0 A - Fuse (to be provided on site): 100 A slow-blow - Max. heat emission to environment: 2.2 kW Permissible Test Specimen Weight: - Total load on grate supports: 100 kg - Chamber floor: 150 kg; Inserted rack: 50 kg Refrigerants: - R 404A / R 23 Weight: 1600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: Hedpfx Aswynmxsb Uefr 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and information!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Hfedpfxow I Rxrs Ab Usr Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Hfjdpfjxrffasx Ab Uer Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 litres Performance for temperature testing: Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance for climate testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Hfjdpsxgd Rdjfx Ab Ujr Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cooling K/min 1.4 Heat compensation max. W 650 Hfjdpfx Ajw S E N Teb Uor Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: used, Technical specifications (manufacturer/model type – without guarantee): Peak force: “according to manufacturer specifications” approx. ≈ 10 kN Max. acceleration: “up to approx. 1,000 m/s²” Max. speed: “typically in the range of approx. 1 m/s to a few m/s” Components: - Control cabinet TGA 022/3 - Vibration exciter SW 6507 - Power amplifier TG D 9000-000.00 - Blower Condition: used Scope of delivery: Vibration test system as shown (Subject to change and error in technical data!) For further questions, we are happy to answer your call. Hsdoxtdl Ijpfx Ab Usfr

Condition: used, Vötsch Model: VC 0018 Climate Test Chamber, Air-Cooled Test Chamber Dimensions: Width 580 x Depth 450 x Height 750 mm External Dimensions: Width 865 x Depth 1150 x Height 1780 mm Test Chamber Volume: approx. 190 liters Specifications for Temperature Testing: Temperature Range: -10°C to +90°C Temperature Deviation at steady state, according to IEC 60068-3-5, depending on chamber temperature over time: ±0.1 to ±0.5 K spatial: ±0.5 to ±2.0 K Temperature Change Rate according to IEC 60068-3-5 Heating: 0.6 K/min Cooling: 0.3 K/min Heat compensation in the range +20°C to +50°C: 200 W Calibration Points: +4°C and +90°C Specifications for Climate Testing: Temperature Range: +10°C to +90°C Temperature Deviation at steady state, according to IEC 60068-3-5, depending on chamber temperature over time: ±0.1 to ±0.3 K spatial: ±0.5 to ±1.0 K Humidity Range: 10% to 98% RH Electrical Connection: Rated Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power: 1.7 kW Rated Current: 9.5 A (neutral conductor plug loaded), Schuko approx. connection cable: 3.5 m Protection: 16 A slow-blow, provided by the customer Weight: approx. 380 kg net Refrigerant: R 134A For your safety as a buyer, please note the following information! Hodjw Hz S Uspfx Ab Uofr The following points are carried out on all climate chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If necessary, a refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors are excepted!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7027-15 Vötsch Temperature Test Chamber, Water-Cooled Temperature Range: -70°C to +180°C Temperature Rate of Change: Temperature Deviation Temporarily ± 0.3 to ± 0.8 K Temperature Deviation Spatially ± 0.5 to ± 2.0 K Cooling Rate of Change: 18.0 °C Heating Rate of Change: 17.0 °C Test Chamber Dimensions: Width 580 x Depth 620 x Height 950 mm External Dimensions: Width 870 x Depth 1895 x Height 1775 mm Hfsdpjwl Argefx Ab Uor Side Ports: 1 x 60 mm Ø and 2 x 120 mm Ø Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 16 kW Rated current 31 A Refrigerant R452A / R23 Approx. 270 liters Weight: 835 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Hfodjwh Ttmjpfx Ab Uor Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch climatic test chamber Here we offer a Vötsch climatic test chamber. Designation VC³ 4100 Air-cooled With temperature change rate of 3 K/min Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Unit dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Feed-through: Ø 125 mm Ø 50 mm Data for temperature tests: Temperature range -42°C to +180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.5 K Temperature change rate: Heating 4.0 K/min Cooling 3.0 K/min Max. heat compensation at +20°C 4500 watts Data for climate tests Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% r. h. Temperature deviation temporal ± 0.1 to ± 0.3 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Humidity deviation temporal ± 1 to ± 3% r. h. Heat compensation max. 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404 A Weight approx. 840 kg Type: VC³ 4100 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Hodpfxjqmn A Nj Ab Uofr (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss Here we offer a Weiss emission test chamber. Mini - SHED for Diurnal Loss Measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (Usable 1600) mm. Housing dimensions: Width 1760 mm x depth 3100 mm x heights 2790 mm Max. floor load 250 kg Operating range +18 °C ...+45 °C, (at higher temperatures SHED operation is only possible without Tedlar bag) Temperature range +18 °C ...+45 °C Temperature constancy ≤ ±1 K (temporal) Temperature change rate, (heating and cooling) approx. 0.5 K/min., without test material Duct connection (air inlet and outlet) ∅ 80 mm, in chamber rear wall Shut-off valve, gas-tight (air inlet and outlet) ∅ 80 mm, gas-tight, pneumatic operation Delivery limit: connection flange of shut-off valve Cooling water consumption approx. 0.8 m3/h Voltage: 230/400 V; 3 PH + N + PE; 50 Hz Rated power: 4,1 kW Rated current: 14,0A Weight: approx. 2500 kg type: WT 5,1'/ + 18-45 Condition: used / used Sale ex location Scope of supply: (Only the Weiss emission test chamber WT 5,1'/ + 18-45 Mini-SHED) Hjdpfx Ajmfny Isb Uofr (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Köhler Salt Spray Chamber Corrosion Chamber Köhler Salt Spray Chamber HKT 500 Operation via touch panel Inner dimensions W x D x H (without hood) 1880 x 840 x 1210 mm Test chamber volume 500 l Temperature range chamber room temp. up to 50°C Hedpen Arqdjfx Ab Uofr Mains supply 230V 1P/N/50Hz 3000W Type: HKT 500 WTG 400 Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), VLM Climate Corrosion Test Chamber Here we offer you a climate corrosion test chamber from the company VLM Name: Condensation test chamber (Corrosion test chamber) Manufacturer: VLM Corrosion testing technology GmbH Description: The chamber is designed for testing the corrosion resistance of metal materials and surface treatments by salt spray corrosion test (NSS) according to: DIN 50021 SS, ASTM B 117-73, ISO 9227 and other methods and condensation tests determined with a chamber volume of 400 liters. Material front door safety glass, clear shield layer on the inside Weight 140 kg External dimensions (WxDxH) 1100x670x1090 mm Internal dimensions of the test chamber (WxDxH) 800x605x920/733 mm Chamber volume 400 l Door opening (WxH) 740×600 mm Maximum sample rod load 20 kg each Operating voltage 230 Volt Frequency 50-60 Hertz Connection 1.850W Control range of the test chamber max. 55 degrees Temperature controller Microprocessor controller PID Temperature stability ± 0,2°K Resolution of LED display 0.1°C Hedpfx Ask H Akgeb Uefr Demi-water quality. Water max. 20 µS/cm Humidifier water consumption Approx. 0.5 l/24 hr Testing Approx. 0,4 l/h Water supply pressure 3/4" 2-4 bar Compressed air consumption Approx. 16 m3/h Type: Salt chamber SAL 400 V.713.062.000 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: VTS³ 7018-5 Water-cooled Test chamber dimensions: Width 580 mm x depth 450 mm x height 750 mm Housing dimensions: Width 900 mm x depth 1550 mm x height 1850 mm Hsdpfx Absn E Sk Es Uofr Temperature test: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: cooling 7.5 K/min Test chamber volume: 190 liters Nominal voltage: 400V Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerant: R404A and R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RS simulators Here we offer a temperature test cabinet. Temperature test chamber water cooled Temperature range: -70°C to +180°C Time deviation: ±1 K according to DIN 50011 with empty test chamber Average heating time: approx. 3 K/min 8acc. to DIN 50011 part 12) Average cooling time: approx. 3 K/min 8acc. to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x height 530 mm x depth 530 mm Outer dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power: approx. 6 kVA power consumption: 12 A Main fuse: 3 x16 A, slow blow Connection voltage: 3x400V/N/PE 50Hz Hsdpfx Aelp Hytob Usfr Weight: approx. 600 kg Type: TS 150/75 Refrigerant: R404A / R23 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Vötsch temperature test chamber Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VTS 7033 water cooled Temperature range: -70°C to +180°C Temperature deviation temporal ± 0,5 K Temperature deviation temporal ± 1,5 K Heating speed: 7,5 K/min Cooling rate: 6.5 K/min Test chamber dimensions: Width 825 mm x depth 800 mm x height 870 mm housing dimensions: 1080 mm x 1710 mm x 1950 mm lateral passage 12cm and 13cm voltage: 400V+6/-10%,3/N, 50Hz nominal power 9,5 kW nominal current 22 A refrigerant R404A / R23 approx. 570 liters weight: 580 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored by calibrated equipment. Type: VTS 7033 Condition: used / used Hjdpfx Aolt U Avob Uefr Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), IVA Engineering Type: M5386 Environment and stability chamber Dry Hot Air Test Chamber Hedpfx Absd Nfrlj Uefr Dry hot air test chamber Rated voltage: 415V AC/20A Dimensions: 90.55x78.74x90.55 in - 2204.60 lb 2300x2000x2300 MM - 1000 KGS Interior Dimensions: (height x width x depth): approx. 1950 x approx. 1230 x 1510 mm Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.