Condition: new, Year of construction: 2023, Functionality: fully functional, Drying system / dryer suitable for various materials such as powder, granulate etc. - Control for temperature regulation Cjlrisqu R Najq S Hsrb This machine is connected and ready for testing in our machine hall.

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with new blade set without control, without sieve -Manufacturer: RAPID, side mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter knives: 2 pieces Crjlriq Sowg Axve Hjb -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Number: 2 cutting mills available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Year of construction: 1995, Condition: ready for operation (used), Functionality: fully functional, Can be seen in operation currently. Granulator has been meticulously maintained by fastidious engineer / owner. This is offered as a complete line including Infeed cleated conveyor belt , with alternative feed for either lumps directly , or feed of loose shredding via metal detection unit at the bottom of the conveyor. The granulator hopper has additional " pipe chute" fitted to the side of the hopper where long profiles or pipes can be fed without cutting. Also included in this complete line , is a Vibtec vibrator sieve , to classify sizes for specific customer requirements and a further two Transitect electronic metal detection / separation units. Kongskilde fan and pipework to cyclone over the big bag supporting framework with dust socks and Kongskilde fines separation unit Spare screens and Blades complete the mechanical package , but also included is not only the control panel , but also the entire main power electrical switches and fuses all moulted on separate stand alone board. A spare drive motor and an additional Cuccolini two deck shaker table makes up the offered package. Colrjwf Rxhjiq S Horb

Condition: good (used), Year of construction: 2011, Make WM Model FC 780E Celriottlzfsq S Herb Year 2011 Condition Good Stations Forming Cutting and Stacking Max Tool Size 780 x 570 mm Depth of draw 130 / 130 mm Max material width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Maximum cycles-minute 45 Forming pressure 7 bar All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: excellent (used), Year of construction: 2012, operating hours: 40,226 h, Functionality: fully functional, machine/vehicle number: 221240, clamping force: 700 kN, screw diameter: 40 mm, clearance between the columns: 370 mm, displacement volume: 188 cm³, injection pressure: 1,530 bar, injection weight: 172 g, Equipment: documentation/manual, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 370S 700-290 with vertical injection equipment Serial number: 221240 Year of manufacture: 2012 Operating hours: 40,226 h Control system: Selogica Dimensions (L/W/H): 3.92 x 1.45 x 2.02 m Weight: 3,300 kg Fully functional Condition very well maintained Extras Device for vertical injection 1 core pull circuit Additional heating band connection 5 free, manually controlled cooling circuits Crjlriswg Tt Rjq S Heb Air valve connection controlled via Selogica Equipment packages: Quality assurance, documentation, advanced monitoring, production control, etc. Flexible part chute. - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Injection unit Screw diameter 40 mm Injection weight 172 g/hp Injection pressure 1530 bar Injection volume 188 cc Clamping unit Clamping force 70 t/700 kN Tiebar spacing 370 x 370 mm Clamping platens 510 x 510 mm Mold height 200 mm Maximum spacing between platens 600 mm Ejector stroke/force 125 mm/30 kN Hydraulic clamping unit Motor power 15 KW Heating power 7.7 KW - 5 zones Total power 23 KW Warranty Warranty until the first Commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our Hanover/Germany warehouse More pictures to follow Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: used, Universal temperature control unit WEINREICH type WTD 4 Serial no.: 11932217 Year of construction 1993 Temperature max. 140°C Operating overpressure max. 6 bar Pump capacity 30 l/min. Tank volume 4 liters Heating capacity 4 kW Cooling capacity of heat exchanger 15 kW Pump motor output 0.37 kW Circulating water flow + return G 3/8" Cooling water flow + return G 3/8" Total output 4.4 kW Mains connection 380 Volt, 50 Hz, CEE plug - Temperature control medium water - Temperature control with actual and setpoint display STÖRK-TRONIC type ST 96-35.02K - SPECK water circulation pump - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - Mobile on 4 castors Dimensions L x W x H 620 x 260 x 670 mm Crolreg Rhx Uoiq S Heb Weight 55 kg good condition

Condition: ready for operation (used), Year of construction: 2003, operating hours: 33,063 h, Functionality: fully functional, clamping force: 220 kN, screw diameter: 22 mm, injection pressure: 1,732 bar, injection weight: 27 g, Newly refurbished, we have this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Fitted with a 22mm diameter screw, which gives a max shot weight PS (g) of 27. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Colriqewak Eds S Horb

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg Colriq Sjwgi Sis Herb with table feed Description has been adopted.

Year of construction: 2002, Condition: ready for operation (used), Functionality: fully functional, ONLY AVAILABLE DUE TO FACTORY CLOSURE Crslriq Sswf Rw Do Hjb Can be seen in operation currently. Granulator has been meticulously maintained by fastidious engineer / owner. This is offered as a complete line including Infeed cleated conveyor belt feed for either lumps directly, or feed of loose shred. The feed is complemented by a large CMC bandsaw included in the offer. Also included in the offer is Rare earth magnet on the outfeed , and electronic metal detection covering ferrous and non ferrous metals . A Kongskilde fines separation unit, transport fans, cyclones and pipework all make the line super efficient. Electrical control panel, and additionally a mains electrical distribution configuration mounted on free standing support is also included. Many spare screens, spare blades, drive belts etc all complete the package. In full running order and currently can be seen and tested running.

Condition: used, Year of construction: 2010, Functionality: fully functional, machine/vehicle number: X66932, clamping force: 6,600 kN, screw diameter: 98 mm, Used Stork IMM 6600-8650R injection molding machine. The machine still needs to be tested and repaired. Colriqewhncio S Herb

Condition: good (used), Year of construction: 1987, Functionality: fully functional, total width: 2,100 mm, total length: 2,600 mm, total height: 2,100 mm, heating capacity: 0.48 kW (0.65 HP), overall weight: 5,000 kg, Clamping unit - Heating capacity of the heating plate 0.48 kW per 1 heating rod 0.9 kW per 8 heating rods Celriqswg Dv Ae S Herb - Pressure capacity 1,000 kN - Clamping cylinder approx. 260 mm - Closing force, rapid traverse approx. 2 x 500 kN Container dimensions (LxWxH) 430 x 600 x 1450 mm

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Screw diameter 45mm Clamping Unit Clamping force 500 tons Additional Equipment Crelowhr I Noriq S Hsb Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Injection Moulding

Year of construction: 2024, Condition: new, WEIMA WL4 Zerkleinerer Antrieb:18.5.kw. Celristlr H Ssq S Hsrb

Condition: repair required (used), Year of construction: 2021, machine/vehicle number: HA0339, Equipment: - 1 chiller - 1 P100XS temperature control unit Colriq Sswhazqe Horb - 1 injection mold test rod

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: X46028, clamping force: 4,400 kN, screw diameter: 84 mm, Used Stork IMM 4400EP-5650-065 injection molding machine. The machine still needs to be tested and repaired. Crelriqswhmvno S Hsb

Condition: excellent (used), Year of construction: 2006, The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany. Dimensin ⇒ 2650 x 2100 x 2100 mm Clamping Force ⇒ 635 KN Working pressure ⇒ 206 bar Piston diameter ⇒ Ø200 mm Stroke ⇒ 140 mm Daylight ⇒ 150/180 mm Heating plant dimension ⇒ 250 x 300 mm Max. mass of heating plant ⇒ 70 kg Oil reservoir ⇒ 100 l Rated power ⇒ 19.66 kW Heater capacity ⇒ 9.6 kW Vacuum motor power ⇒ 2,6 kW Colrswg Dvvoiq S Hjrb Between light curtain and mould area ⇒ 270 mm Stroke of vacuum cover ⇒ 140 mm

Condition: ready for operation (used), Year of construction: 2003, Control Unit Cslrjwhgqfeiq S Horb Brand NETSTAL Injection Unit Injection pressure 279 kN Clamping Unit Clamping force 1500 kN Opening stroke 0-450 mm Mould height min 400 mm Mould height max 700 mm Additional Equipment Equipment: PLastification D 45-22D LP A / Mould heaters: 4 x 3.3 KW/ 32 x 0.75 KW / Robot interface 12+ / Paint conveyor interface Europe interface 15 1-1 / 4 air valves 890L / 1 core puller Hydr Cooling water in the outlet opening and 2 distributors on each of 8 cooling circuits The machine was partially overhauled in 2018 This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN. Application Types Injection Moulding

Condition: used, Year of construction: 2013, Functionality: fully functional, machine/vehicle number: X45132, clamping force: 4,400 kN, screw diameter: 84 mm, Used Stork IMM 4400-3550 injection molding machine. The machine still needs to be tested and repaired. Cjlrijwhmphoq S Hjrb

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force ⇒ 7,000 kN Operating pressure ⇒ 250 bar Specific pressing pressure ⇒ 610 N/cm² Number of levels ⇒ 2 Installation height with 75 mm heating plate & 20 mm insulating plate ⇒ approx. 2x 190 mm Piston stroke ⇒ approx. 400 mm Piston 1 diameter ⇒ 543 mm Clamping force, rapid traverse ⇒ approx. 2 x 85 kN Retraction force ⇒ approx. 2 x 47 kN Operating pressure ⇒ 300 bar Piston 2 diameter ⇒ 60/40 mm Stroke: 400 mm Estimated weight ⇒ approx. 16 tonnes Hydraulic System: Crolrjwg Dvisiq S Heb Pressure adjustment ⇒ 40 - 300 bar Flow rate regulation ⇒ 0 - 99 % Flow rate l/min (HD) ⇒ 45 against 300 bar Drive power ⇒ 22 kW Tank dimensions (LxWxH) ⇒ 1000 x 770 x 535 mm Closing Speed: Rapid traverse ⇒ approx. 40 - 50 mm/s Slow closing ⇒ approx. 0 - 20 mm/s Pressing speed ⇒ approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: repair required (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: X34129, clamping force: 3,300 kN, screw diameter: 62 mm, Used Stork IMM 3300-2150-065 injection molding machine. The machine still needs to be tested and repaired. Crslswhluieriq S Hjb

Condition: repair required (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: X29324, clamping force: 2,500 kN, screw diameter: 62 mm, Used Stork IMM 2500-1450 injection molding machine. The machine still needs to be tested and repaired. Crslriqowhlk Do S Hob

Condition: repair required (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: X27054, clamping force: 2,000 kN, screw diameter: 62 mm, Used Stork IMM 2000-1450 injection molding machine. The machine still needs to be tested and repaired. Crelewhlddoriq S Hsb

Condition: reconditioned (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Crslriqswhk Ius S Heb

Condition: used, Year of construction: 2003, Functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, Used Stork IMM 12000-19000 injection molding machine. Crolowhkfysriq S Hjb

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: X81467, clamping force: 9,000 kN, screw diameter: 115 mm, Used Stork IMM 9000-8650 injection molding machine. The machine has been tested and repaired. Crolrjwhiy Asiq S Hjb