Condition: repair required (used), functionality: not functional, Walter HMC 500 WWM 5-axis tool grinding machine, damaged. A-axis: 750mm X-axis: 290mm Y-axis: 320mm Z-axis: 660mm Tool diameter: 200mm Dcjdpfxjz E Rcbs Apmop Error code shown in the picture.

Condition: used, Board feeding system Jacksteel Dcedez Syifopfx Apmjp Year of construction: 2018 JackSteel board feeding system for transporting boards/blocks out of the saw, separating the blocks one by one and then feeding them into the centre for re-sawing. Below the line is a chain conveyor for the collection of chips and waste. The line operates at speeds of up to 90 m/min.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, Log infeed Reducer Debarking Block conveyor EWD ZE infeed table Microtec 3D measurement Dcedpfxsz Tfa Sj Apmsp Spaner FZ3 Roller unit EWD EVW Flexible double-shaft circular saw EWD DWK 700 T-6 6 flexible saw axes Cutting height 60-340 mm 2x200 kW Complete Siemens S7 control system, year 2014 Complete hydraulics/control cabinets

Condition: excellent (used), Year of construction: 2014, I sell the 2-spindle horizontal multirip saw of polish production Walter OP-500. Year 2014. Suitable for cutting round wooden logs with 2 Spindles. Dcjdpfxowini Es Apmjp Cutting width 120 - 350mm. Motors 23,8 + 23,8 KW. Total power 54,2 KW. Diameter of main saw blade max. 500mm. Feed speed controlled by variator up to 20m/min. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings • 55 kW saw motor • 1,170 mm working height Dsdpsw I Sg Dsfx Apmecp • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: used, functionality: fully functional, Used merry go round chipper canter line from the Austrian producer Lindner. The canter is equipped with two 37kw electric motors and the ripsaw with one 90kw electric motor. Very simple and good working line Reform knife grinder machine included. Loaded on truck. We can also include dismantling. Subject to prior sale. Dcjdpezrn Ecsfx Apmjp

Condition: excellent (used), operating hours: 9,500 h, functionality: fully functional, track width: 2,870 mm, year of last overhaul: 2026, total width: 3,100 mm, number of previous owners: 1, Equipment: crane, low noise, Manufacturer: BALJER / Zembrod Type: AS/28H-R.D - ES122 Dcodps Afzzuefx Apmsp 11 kW connected load Year of manufacture: 1994 Cutting length… Operating hours: 9500 Outreach: 12 m Very good condition, Tracks approx. 60 m (included) With trailer.

Condition: good (used), functionality: fully functional, Esterer spreading jaw AVER. Dodpez D Exujfx Apmecp Equipped with electrically driven spreading rollers. Also adjustable manually. Electrical adjustment of the spreading jaws, also asymmetrical. Pressure rollers can be hydraulically extended and retracted. Heavy-duty spreading jaw blades and spring flaps.

Year of construction: 1991, condition: excellent (used), functionality: fully functional, Möhringen high-performance band saw from a small sawmill. Frame width 750 x 710 mm. Stroke 500 mm. Speed 300 rpm. Hydraulic feed, continuously adjustable from 0 to 12 m/min. Hydraulic raising of the saw wheels with adjustable wheel pressure. Automatic adjustment of the saw frame overhang. Dcjdpfez N Dd Usx Apmjp Automatic electric central lubrication system. Full and idle pulleys. Reinforced steel flywheel. Electromagnetic remote control. Saw mounting with sliding guides, saw gauges. Hydraulic saw tensioner. Electrical control cabinet and accessories. Professionally disassembled and loaded onto a truck for transport.

Condition: excellent (used), Year of construction: 2002, Flexible twin-blade circular saw Cutting height 375mm 4 movable axes 4 x 132 kW motor power 2 x 37 kW height-limiting cutter Dcedpfjz Tfaxjx Apmjp The machine was only used for 2 years and then stored.

Condition: excellent (used), Year of construction: 2024, We offer for sale a heavy-duty double-blade angular saw type D9, designed for efficient processing of hardwood logs up to 4 m length. The machine is in very good condition and is supplied as a complete line including clamping wagons, conveyors, sorting system, and operator control cabin. Key Features & Benefits Double-blade angular cutting system (horizontal + vertical saw) Designed for hardwood processing High-performance industrial solution Smoothly adjustable feed speed Complete technology line including conveyors and sorting Includes operator control cabin Energy-saving system with braking energy recovery Technical Specifications Cutting System Saw blades: 2 × 500 mm (horizontal + vertical) Saw head power: 2 × 22 kW Blade speed: approx. 2,900 rpm Max. cutting section (angular): approx. 180 × 180 mm Material Capacity Log diameter: approx. 100 – 800 mm Log length: approx. 2,000 – 4,000 mm Processing line for logs up to 4 m Feeding & Handling 4 clamping wagons, each with clamp and rotator 1 transport wagon with travel motor (approx. 30–32 kW) Adjustable feed speed up to approx. 120 m/min Horizontal compensation of tapering Hydraulic system with lubricated track and wagons Drive & Power Main motors: 2 × 22 kW Saw head feed servo (X axis): approx. 5.5 kW Clamping tower servos (Y axis): 5 × 5.5 kW Travel motor: approx. 30–32 kW Hydraulic unit motors: 5 × 3 kW Total installed power: approx. 135 kW Control & Equipment Operator control panel 2 laser guides Remote access system Measurement of power consumption Hydraulic heating function Electric cabinet heating Conveyors & Line Equipment Infeed system: 2 × infeed conveyors, each 6 m long Heavy-duty 3-chain construction Integrated log handling and transfer system Chip extraction belt conveyor (cutting waste removal) Outfeed system: 1 × single-sided tilting conveyor for waste 2 × sorting conveyors for processed timber (both sides discharge) Sorting System Extraction Requirements Required extraction capacity: min. 8,000 m³/h Connections: 150 mm + 2 × 200 mm Dimensions & Weight Machine length: approx. 36,500 mm Machine width: approx. 3,000 mm Dcsdozgtfqopfx Apmsp Machine height: approx. 3,000 mm Total weight: approx. 13,500 kg Condition & Sale Terms Condition: Very good Fully operational industrial line Sale includes control cabin Dismantling and removal to be arranged by the buyer Advantages Complete production line High productivity for hardwood processing Strong and reliable industrial construction Precise cutting and stable output Efficient handling with integrated conveyors and sorting

Condition: refurbished (used), functionality: fully functional, Centering unit, Linck ZZV type 2 x 5 rollers, hard chrome-plated hydraulic closing cylinder with valve block Dcsdjz Hc Hbjpfx Apmsp new feed motors suitable for the required feed speed.

Year of construction: 2001, condition: excellent (used), machine/vehicle number: R200 SE (R200 A.1), Complete sawmill Log lengths: 2.4–6.5 m Log diameters: 8–35 cm Line speed: 60–130 m/min. Capacity: 120,000 m³/shift Hewsaw R200 SE with banana infeed Left/right motor: 132 kW Top/bottom motor: 110 kW Saw motors: 132 kW Edging unit: 37 kW Board separator Dcjdoz Tfa Ejpfx Apmep

Condition: refurbished (used), Completely refurbished Bongioanni CRL 4 tensioning wagon with clamping blocks. Track gauge 1200 mm. Rails newly milled. Servo-electric drive. Sale upon customer order. Dcjdpfxsxtwxbe Apmjp

Condition: good (used), functionality: fully functional, Robust spiral conveyor with right-hand deflection. Length 8.80 m. Roller length 800 mm. Dodpjz Ixfcjfx Apmocp Complete with drive unit.

Condition: refurbished (used), Year of construction: 1969, functionality: fully functional, Debarking machine Cambio 66 with infeeding device. Totally checked and renovated Dsdsz S Uc Tjpfx Apmocp Main motor 30 kW and feeding motor 7.5 kW . Hydraulic pressure for feeding wheels will be added later before delivery. Pressure system for tools is basic with rubber rings and tools are with " Pyramo " tools.

Year of construction: 2000, condition: excellent (used), According to customer order for sale: - Complete trimming system EWD Combimes with Sage Model DK 90 TL - Produced in 2000. - With sorting roller conveyor, 6 removal points. Djdpfx Apevt Rlxomocp System already dismantled. Very good condition.

Condition: good (used), functionality: fully functional, B&Z sorting and cut-to-length trailer. Track gauge 1.90 m. Equipped with a Stihl HF 121 saw. Surveying system. Alpha cut-to-length system. Jonsereds crane. Hultins grapple. From a small business, manufactured in 1986 / overhauled in 1998. Dodpezumx Hsfx Apmjcp 25,000 operating hours. Also interesting for firewood producers.

Condition: like new (used), Year of construction: 2001, operating hours: 7,200 h, functionality: fully functional, overall weight: 20,000 kg, cutting height (max.): 800 mm, cutting width (max.): 1,000 mm, total height: 3,000 mm, total length: 10,000 mm, transport width: 2,500 mm, Equipment: cabin, documentation/manual, Complete sawmill plant in excellent condition. The plant does not require any overhaul as it has been used sparingly. The plant consists of: Dsdoz N Sxgepfx Apmjcp * Artiglio 1300 log saw * Modesto edger with one fixed blade and one movable blade * Ferrari chipper * Complete conveying system, log reloader, vertical saw

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 9911294-0120, Rotary indexing table DV 55, manufactured in 2014, can be used for pre- or post-machining. Dedpfx Aozpygtopmecp In excellent condition! We have 2 units in stock at our Schlitz warehouse.

Condition: used, functionality: fully functional, product height (max.): 120 mm, product length (min.): 585 mm, product length (max.): 6,050 mm, product width (max.): 440 mm, - Made in Germany TECHNICAL SPECIFICATIONS: - Maximum cutting length: 6050 mm Djdpfxoxdxv Nj Apmecp - Minimum cutting length: 585 mm - Cutting height: 120 mm - Maximum material width - Saw blade diameter: 400 mm - Number of cutting units: 4 - Cutting unit power: 4x 3 kW - Feed motor power: 1.1 kW - Material feed via chains - Feed speed adjustable with gear motor

Condition: excellent (used), Catalog number: 8079 TECHNICAL DATA - log diameter 60-360mm - min. log length 1500mm - rotor diameter 385mm Dcjdjzu Svwspfx Apmop - number of knives 4 - drive system: PTO shaft - dimensions (L/W/H) 2200x2900x1700mm - weight approximately 3000kg ADVANTAGES - PTO shaft drive - for debarking logs - country of origin: Finland - used debarker, very good condition Net price: 38900 PLN Net price: 9050 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Year of construction: 2014, condition: like new (used), WALTER TD500 KBA Sawmill - user manual - CE certificate – after technical review - very good condition – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m TECHNICAL PARAMETERS: main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls disc diameter 500 mm spindle diameter 70 mm Dsdsmv Ekyepfx Apmscp spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Djdpfozrtpmex Apmjcp Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: excellent (used), CATALOGUE NUMBER 8129 Technical data: - diameter of circular saw blades 500mm - spindle diameter 60mm - max. diameter of material being cut 380mm - min. thickness of material being cut 100mm - max. thickness of center prism 160mm - min. thickness of center prism 60mm - max. number of saw blades: 2 pieces per motor - motor power 4 x 7.5kW/400V, 50Hz - speed 1450 rpm - feed motor 1.5kW - manual table lifting up to 80mm - feed speed on frequency inverter 0-8m/min - output approximately 40 m³/h - dust extraction nozzle 2 x 150mm - dimensions (L/W/H) 6150x1350x2000mm - weight approximately 2000kg Dcodjz U Ihzjpfx Apmop ADVANTAGES - Made in Poland, drewMET brand - 4000mm track - Unpainted – used machine, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)