Condition: used, Year of construction: 1980, Graule ZS 85 N Cross-cut and mitre circular saw, tiltable ~ Year of manufacture: 1980 400 Volt three-phase, 2 kW Saw blade diameter: 350 mm, bore: 30 mm Isdpfx Ajyv Aa Sjbvjtd Cutting height: 85 mm Cutting length: 380 mm at 90° Cutting length: 270 mm at 45° Extraction port D = 100 mm

Condition: used, Year of construction: 2020, functionality: fully functional, empty load weight: 385 kg, load capacity: 2,000 kg, construction width: 980 mm, Rotating device Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Itjdpfx Abov Dng Ijvsd Condition: Ready for use and fully functional Technical condition: very good

Condition: used, functionality: fully functional, load capacity: 8,000 kg, empty load weight: 900 kg, construction width: 1,500 mm, Rotating device Itodpfx Aju Dz Txebvod Load centre of gravity: 600 ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: very good Description: 360° endless rotation in both directions Assembly Fork carriage width: FEM4 / 1200 mm Fork carriage width: 1500 mm

Condition: good (used), functionality: fully functional, 2.5 HP motor, max. cutting height approx. 45 mm, saw blade diameter approx. 180 mm, depth to fence approx. 500-530 mm, fitted with extraction unit, rear fence table, support consoles/support table, pneumatic pressure bar / workpiece clamping, ex location. Shipping available at extra cost! Isdpfoyu Sl Tox Abvetd

Condition: used, Year of construction: 2000, functionality: fully functional, Robland Z320 Sliding Table Panel Saw - YoM: 2000 Machine is in well used condition, but fully working. Machine would benefit from a good clean. £1,500 (GBP) + VAT. 3200mm Sliding table saw. 1250mm Rip Fence x 3200mm Cross fence stops. Main Saw Blade Max Dia 400mm Scoring blade. Manual 0-45 Deg Blade tilt. Manual Rise and fall on blade. Iodeynkm Nopfx Abvstd Manual adjustment of the Scribing blade.

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Iodjxw Ii Sopfx Abvetd Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: excellent (used), Year of construction: 2012, Panel saw Manufacturer: Altendorf Model: F45 Year of manufacture: 2012 Operating hours: approx. 820 h Sliding table length: 320 cm Cutting width: approx. 1,013 mm Cutting height: 175 mm Itjdpsyvqzkofx Abvjd Max. saw blade diameter: 500 mm Scoring unit: Yes – Rapido Cutting width adjustment: Electric Speeds: 2,000 – 6,000 rpm Speed adjustment: Vario – Stepless Motor brake: Yes

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Cutting area: 4200 x 4200 mm Maximum cutting height: 80 mm Saw blade protrusion: 92 mm Iedpfxsyt Tkus Abvjtd Main saw motor: 11 kW Scoring saw motor: 2.2 kW Total electrical connected load: 19.5 kW, 41 amperes Required air pressure: 8 bar Extraction: 4000 m³/h Saw feed speed, stepless: 0 - 70 m/min Rip fence speed: 0 - 80 m/min (max. output: 25 m/min) Main saw blade: 350 x 4.4 x 30 Z 72 TF Scoring saw blade: 180 x 4.4/5.4 x 30 Z 28 VR conical Net weight approx. 6000 kg Availability: by arrangement Storage location: Rhineland-Palatinate

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: SIEMENS, controller model: n/a, This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • No defects; the system was refurbished in 2024 and is in like-new condition. / scope of delivery: machine without extraction system, including technical documentation (2 copies in binders) Technical Machine Benefits • Sawing of solid material made of aluminum and aluminum alloys / sawing of profiles, tubes, and flat material / right-angled and mitre cuts up to ±45 degrees / in combination with a length stop, up to ±90 degrees / slot cutting • Rotating table for mitre and longitudinal cuts, with a rotation range of 180 degrees / rotary table adjustment: manually continuously adjustable ±90 degrees Itedpfjyuum Tex Abvsd • Comes with 450 mm carbide-tipped saw blade, standard tooling, and coolant system / saw blade diameter (standard): 450 mm / kerf width (max. ): 4 mm / saw blade types: carbide-tipped saw blade (hm) / high-speed steel saw blade (hss) / saw blade mounting: mounting hole according to din 8576 • Cutting speed (with 400 mm blade diameter): two-step with v-belt: 1950 / 3900 m/min / feed speed: continuously adjustable: 0–3500 mm/min /rapid return speed: 4500 mm/min • Electrical connection power (two-step with v-belt): 3. 7 / 4. 7 kw (optional: 4. 7 / 6. 3 kw) / compressed air supply: 6–8 bar • Weight: 1480 kg / dimensions (l × w × h): 2700 × 1450 × 1900 mm • Electrically adjustable stroke limit for the saw feed / hydro-pneumatic saw blade feed, infinitely adjustable / rapid return stroke for short cycle times / large cabinet-style door for easy saw blade change, electrically interlocked / protective machine hood with large viewing windows, electrically secured / automatic minimum quantity lubrication (mql system)

Condition: used, Length of the rolling table max. 3.200 mm Iedpfxoyc Rtrs Abvotd Saw blade diameter max. 400 mm 45°

Condition: used, Year of construction: 2020, functionality: fully functional, power: 11 kW (14.96 HP), type of input current: three-phase, cutting width (max.): 320 mm, actuation type: electric, Equipment: CE marking, documentation/manual, motor brake, We offer this used Stenner ST bandsaw / resaw, year of construction 2000. Resaw bandsaw machine Ideal for cutting beams and boards in woodworking. The anti-adhesive pump is defective. (Original pump and an alternative are present; the alternative needs to be installed by the buyer) Itjdpfx Asytyr Esbvod Brand: Stenner Type: ST 105 Year of manufacture: 2020 Power: 11 kW Cutting width: 320 mm Extra feed rollers (also suitable for cutting mastics residue) Additional bandsaw blades Documentation available Has had annual maintenance. Can be seen in operation on location for serious interest. Price is excl. VAT. Dismantling and transport by arrangement. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Ijdju R S Akepfx Abvstd Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm - new exhibition machine -

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine - Itjdpfx Absu R Sy Nsved

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Ijdpfxsu R S Dhe Abvstd Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic Isdpfx Aewnrf Uebvstd - New exhibition machine -

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Iodpfx Asyuld Aobvjtd Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: used, Year of construction: 2009, power: 3 kW (4.08 HP), cutting height (max.): 2,150 mm, cutting width (max.): 4,300 mm, No. 3261 Vertical panel saw ELCON ADVANCE 215 DSX Used, year of construction 2009, machine still in operation, expected to be available from 01.05.2026 Precision panel saw ELCON ADVANCE 215 DSX - The panel saw for industrial production Vertical cutting height 0 - 2150 mm Horizontal cutting height 50 - 2050 mm Cutting length 4300 mm Cutting depth 80 mm (55 mm with clamps) Saw blade protrusion behind the panel 15 mm Saw blade 303 x 30 mm, Z-60 hollow roof tooth Saw blade speed 4200 rpm Motor 3 kW Air pressure requirement 6 bar Material support rollers 20 rollers, ball-bearing mounted + 2 feed and discharge rollers Panel clamping for horizontal saw cuts via pneumatic workpiece clamping device with switch on the control panel Center support 3 support elements for 3 m support, pneumatically extendable Dimension readout for horizontal saw cuts via electronic digital display with zeroing (for strip cutting from top to bottom) / via scale from 0 - 2100 mm / via strip cutting stop from 75 - 730 mm Dimension readout for vertical saw cuts via electronic digital display / via scale from 0 - 1300 mm Extraction nozzles 100 mm for the saw unit and 120 mm for the extraction channel on the right side of the machine frame Equipment features ADVANCE consisting of 2 pneumatic clamping jaws that move motor-driven along the vertical axis on a ball screw from top to bottom (the jaws can support panels weighing up to 150 kg) Electro-pneumatic scoring system for tear-free cuts via a double cut with the main saw blade Torsion-free, freestanding machine frame Round bar guide for vertical and horizontal travel Pneumatically retracting slatted guide prevents the saw blade from cutting into a rear wall slat (strip) Extraction nozzle for the saw head to collect dust in front of the workpiece Extraction nozzle for 3 vertical extraction channels to collect dust behind the workpiece Fine-adjustable folding fence for vertical cuts, guided on a 30 mm round bar Fence extension Fine adjustment for horizontal cuts via handwheel Fold-out strip cutting stop with ball bearing sensor on the upper panel edge, adjustable from 75 - 730 mm, for repetitive saw cuts Manual programming rail for setting 5 different horizontal fixed dimensions Pneumatic lowering of the saw unit via a lowering lever Pneumatic saw head locking from the control panel for horizontal cuts Guide holder Minimum strip height with Advance clamping jaws 400 mm Sale on behalf of customer, from location near 72280 Dornstetten, without dismantling, without transport, and without assembly Dismantling, loading, and transport by us optionally possible Itodpfxoyvu Afs Abvod Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex location

Condition: used, Year of construction: 2018, total length: 5,000 mm, total width: 1,500 mm, total height: 1,650 mm, Weight: 1.450 kg Price: On request - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1408 Itedpfxox Igaye Abvsd - Max. cutting length [mm]: 3800 - Max. cutting height [mm]: 95 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 125 - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 19 - Transport dimensions: 5000mm x 1500mm x 1650mm (l x w x h) - Transport weight [kg]: 1450kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, Weight: 1.500 kg - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iodpfxoxdlx Rj Abvstd Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Itsdpfxsv Aalys Abvjd Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: ready for operation (used), Year of construction: 2025, Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details. • Condition: New • Application: Classic cutting of rectangular workpieces made of wood/wood-based materials with laminate (CLP, HLP), paper, foil, or veneer • Workpiece/panel capacity: • Length: from 140 mm • Width (finished size): min 50+50 mm; max 450+450 mm (asymmetrical cutting possible) • Thickness: 8–40 mm • Max workpiece weight: approx. 30 kg • Shape: rectangular • Working height: 900 mm • Machine side: Right-hand machine (stop side on the right in the direction of travel) • Feed/adjustments: • Feed speed: 5–40 m/min, servo-controlled • Electronic height adjustment: 5–45 mm via Beckhoff servo axis • Right-side Teflon stop ruler, servo-driven • Left infeed ruler with pneumatically spring-loaded unit, servo-driven • Construction/transport: • Sturdy welded steel frame • Transport by belt with height-adjustable top pressure • Low-maintenance belt with gentle transport coating • 32 mm V-belt top pressure with spring-loaded rollers for reliable guidance • Aggregates: • Aggregate 1: Frequency-controlled scoring saw • Perske motor 4.4 kW, 50 Hz, 400 V, 4500 rpm • Tool holder D=35, key • External + internal thread R/L, servo-controlled, tandem, non-swiveling • Height adjustment via Beckhoff servo axis • Lateral adjustment with mechanical digital display • Max saw blade Ø 350 mm • Flow-optimized extraction hoods • Without tools • Aggregate 2: Frequency-controlled main saw Itsdpfsyuggxsx Abvjd • Perske motor 6 kW, 50 Hz, 400 V, 5000 rpm, counter-rotation • Tool holder D=35, spline shaft, external + internal thread R/L • Max saw blade Ø 400 mm • Split wedge adjustable by hand • Height adjustment via Beckhoff servo axis • Lateral adjustment with mechanical digital display • Flow-optimized extraction hoods • Without tools • Control and HMI (Beckhoff): • PC-based control with integrated PLC and electronic line control (TwinCAT 3) • 15.6" multitouch panel with integrated keypad/keyboard/mouse • Simple, component-oriented program creation; freely definable program names; virtually unlimited program memory • Operation via keyboard/mouse/touch; message system for operator/error messages • MDE Basic: production time, setup time, downtime, fault time, unit counter, adjustable recording period • Fast EtherCAT fieldbus; Ethernet RJ45; USB port • Uninterruptible power supply (UPS) for panel PC • PLC programming per IEC 61131-3 • Feed lock for adjacent machines/transport systems • Included with basic machine: • Sound absorber/protective hood with safety lock • Connection pieces for external extraction (min air velocity 28 m/s, negative pressure 2480 Pa) • Compressed air connection with maintenance unit • Integrated control cabinet with cooling unit (ambient 10–45 °C) • Safety and protective measures per CE; CE mark • Utilities and specs: • Operating pressure: 6 bar • Power: 3/N/PE, 400/230 V, 50 Hz, ±5% (ECD protective circuit not applicable) • Language: • Machine labeling: German • Operating instructions: German • Spare parts lists: German • Paint finish: • Base/cladding: Gray-white RAL 9002 • Aggregates: Dust gray RAL 7037

Condition: used, total height: 2,980 mm, total length: 2,000 mm, total width: 1,600 mm, Weight: 2.000 kg Price: On request - Documentation available: No - CE certificate present: No - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1220 - Max. cutting to feed roller opening [mm]: 210 - Max. cutting to stop opening [mm]: 390 - Max. cutting width to column [mm]: 650 - Max. total opening [mm]: 600 - Max. cutting height [mm]: 380 Itedpfoyna Dwex Abved - Table width [mm]: 1150 - Table length [mm]: 1200 - Max. band saw width [mm]: 120 - Extraction port diameter [mm]: 250 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 45 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 2000mm x 1600mm x 2980mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, total length: 5,200 mm, total width: 900 mm, total height: 1,700 mm, Weight: 500 kg Price: On request - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 8.687 - Main motor power [kW]: 3.1 - Max. cutting depth [mm]: 120 - Max. cutting height [mm]: 90 - Min. saw blade diameter [mm]: 350 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 6.53 - Fuse [A]: 16 - Power [kW]: 3.1 Itjdpfx Aoyna Ayjbvod - Transport dimensions: 5200mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Weight: 500 kg Price: On request - Year: 2010 - Documentation available: No - CE certificate present: No - Serial number: 6.719 - Main motor power [kW]: 3.1 - Max. cutting depth [mm]: 120 - Max. cutting height [mm]: 90 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 7.13 - Fuse [A]: 16 Isdpfeyna Aaex Abvotd - Power [kW]: 3.1 - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, total length: 4,100 mm, total width: 1,100 mm, total height: 1,500 mm, Weight: 550 kg Price: On request - Details: - └ Description: Fault, machine does not turn on (screen does) - Year: 2011 - Documentation available: No - CE certificate present: No - Serial number: 01287 - Main motor power [kW]: 3.0 - Max. cutting length [mm]: 3000 - Max. cutting depth [mm]: 190 - Max. cutting height [mm]: 110 - Max. saw blade diameter [mm]: 400 - Options: Digital readout, Automatic width adjustment - Voltage [V]: 400 - Current consumption [A]: 14 - Fuse [A]: 16 - Power [kW]: 6.3 - Transport dimensions: 4100mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 550kg - Transport packages [pcs.]: 1 Iedpsym U D Ajfx Abvstd Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels