Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 3.6 kW (4.89 HP), Sanding belt width 150 mm, sanding belt length 2000 mm, table manually tiltable Itodpey D Du Hjfx Am Ejf

Condition: used, Year of construction: 2007, machine/vehicle number: MR000798, Used circular saw with right-side extension and rear outfeed table. Technical specifications: - Maximum cutting width to rip fence: 1250 mm - Maximum saw blade diameter: 450 mm - Saw blade tilting range: 0–45° - Maximum cutting height (at 90 degrees): 130 mm Iedoyzw Hqepfx Am Estf

Condition: used, Useful cutting length 3200mm Maximum cutting height 170mm Saw diameter from 450 to 550mm Digital display of width Potentiometer for adjusting the cutting height and blade feed rate Laser line Iodpfxjyy Sa Ns Am Eetf Parts ejection device 11 kW motor 380V

Condition: used, 900mm steering wheels Automatic trainer Air pressure 11 kW motor Itjdoyy R U Espfx Am Esf 380V

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, power: 18.5 kW (25.15 HP), cutting width (max.): 900 mm, This machine comes with a Woodmizer hydraulic log deck It has a 7m cutting length 18.5kWh saw engine Ijdpfxjyub Iqs Am Eetf

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads 300 mm working width With 3 cutting heads, to make max 4 slats in one run Itedpfxovwbg Ue Am Esf New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: excellent (used), Sprossen Punching Machine 12 mm used, in excellent condition Brand: Jeyden Sprossen blade 12 mm Itjdsyza Anjpfx Am Eof Right-hand support table with adjustable stop Space requirement approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free onto transport, unpacked Sold as seen in current condition, without warranty or guarantee

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood. Features automatic feed and return of the saw carriage, continuously adjustable feed advance, saw blade height, and cutting length. Equipped with a pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, 3-phase brake motor 6.8 HP / 5 kW and scoring unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm. The machine is in good condition and ready for immediate use, located at Neustadt/Weinstr. Transport available at extra cost! Iodpfx Aeyzxkwem Estf

Condition: excellent (used), Year of construction: 1989, Elektra Beckum Bandsaw BAS 450 DB Year of manufacture: 1989 Cutting height: 300 mm Blade length: 3,380 mm Motor power: 1.5 kW Weight: approx. 120 kg Location: ex stock 54634 Bitburg Iodpfx Ajyy U Txem Estf - immediately available - Subject to prior sale

Condition: ready for operation (used), Year of construction: 2000, cutting length (max.): 3,300 mm, This HOLZMA HPL 23/X/33/22/30/L was manufactured in 2000. A robust used panel saw featuring a cutting length of 3300 mm, 3 air cushion tables, and a lifting table measuring 3300 x 2200 mm. It includes a main saw with 18 kW power and a scoring saw of 2.2 kW, controlled by a CADMATIC system. Contact us for more information about this machine. Iedpfx Aox D Hlfem Ejtf • Cutting length: 3300 mm • Saw blade overhang: 125 mm • Main saw motor: 18 kW • Scoring saw motor: 2.2 kW • Control: CADMATIC Additional equipment • 3 air-cushion tables • Lifting table, 3300 x 2200 mm

Condition: ready for operation (used), Year of construction: 2020, cutting length (max.): 5,300 mm, cutting depth: 80 mm, This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. • Saw unit motor power: 5.5 kW • Saw blade diameter: 300 mm • Cutting depth: 80 mm • Cutting length: 5300 mm • Cutting height: 2200 mm • Maximum horizontal cut: 2080 mm Iedsx D D Scopfx Am Eotf

Condition: ready for operation (used), Year of construction: 2021, This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. • Saw blade diameter: 250–550 mm • Cutting height: 202 mm (90°), 140 mm (45°) • Blade speeds: 3000 / 4000 / 5000 rpm • Cutting width: 1250 mm Itsdpfx Aox D Exqjm Eef • Cutting length (sliding table stroke): 2800 mm • Control: Kappa 550 e-motion • Cantilever table support surface: 1250 x 650 mm • Telescopic stop for crosscuts up to 3200 mm • Crosscut stop swiveling range: 90° to 45° • Rear table extension behind saw axis: 1200 mm • Rip fence: electronically positioned via ball screw, enclosed/dust-free in the table

Condition: excellent (used), Year of construction: 1986, Scheer circular cutting system Stable base frame Portal design allows workpiece to pass through Fully automatic control with skip function Height-adjustable drilling unit Cutting diameter: Min: 70 mm Max: 305 mm Depth: Max. 40 mm Up to 2 panels per cut Central bore: 7–10 mm Possible center bore: 15–35 mm Drill motor BM 602 Machine cycle times: Iedpfxjyy St Aj Am Estf Beech: diameter 220 mm, depth 40 mm – 40 sec Plywood: diameter 220 mm, depth 40 mm – 20 sec Chipboard: diameter 350 mm, with bore D: 35 mm – 30 sec Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2007, Striebig panel saw Evolution 6224, year of manufacture 2007 Type 6224 Year of manufacture: 2007 Motor 5.5 kW Cutting length approx. 5300 mm Cutting height approx. 2100 / 2240 mm Digital display in Y Center support Cutting depth 80 cm Saw blade diameter approx. 303 mm Free-standing installation Slatted frame moving away Wooden back wall Extraction connection D 120 mm Space requirement approx. 6300 mm x 1250 mm x 2720 mm Weight approx. 1200 kg Total connected load approx. 5.5 kW Itedpfxsvk Sh Ao Am Ejf Location: from warehouse 54634 Bitburg, free loading, unpacked Handed over in the current condition as viewed without guarantee or warranty

Condition: used, GRAULE AGT pull and table circular saw Ijdpfx Amoxf Tr Us Ejtf

Condition: good (used), Year of construction: 1996, Hema Profile Grinding Machine Type PSM 300, year 96, with base frame HEMA PSM 300 Universal Profile Grinder Isdpfeyl Ilwox Am Eetf - Automatic belt tensioning - Tool-free, fast belt change within seconds - Standard internal grinding with same belt length - Quick-change system for grinding bars - Cast iron table, 450x450 mm, tiltable up to 45°, zero stop and scale - Motor 1.1 kW, 2800 rpm - Very quiet operation - Maximum grinding height 300 mm, grinding bar height inside 200 mm, outside 250 mm - Switch with undervoltage release - Extraction port 60 mm - Connection for industrial vacuum cleaner

Condition: used, Scheer FM 2-3000 Veneer Saw, Splicing and Fine Cutting Saw Type: FM 2-3000 Motor: 2.5 HP Machine No.: 199540 Cutting length: 3000 mm Saw blade diameter: 180 mm Rear support table Iedpsxf Tqwefx Am Eetf Weight approx. 300 kg.

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Itjdjx Twcvopfx Am Eof

Condition: used, Cutting optimization system HOLZ-HER – used – Iodpfxjyyzq Ro Am Ejtf PC system with touchscreen, label printer, for installation on a vertical panel saw, USB port, network port, includes office version OPTI-V-Base

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retracting shifting grid, stable latching of the saw carriage at both top and bottom, latch monitoring in vertical cut electrically controlled, foldable plunge lever on the saw unit, retractable riving knife for cut-outs, operator panel at eye level, digital display on the longitudinal fence, digital display for horizontal cut, strip cutting device, roller lift transport system, trim-capable support surface, dust extraction device TRK, dust-tested. ----- Technical Data ----- Cutting length: 5200 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Required space (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Quality Information: - Fence strips replaced / refurbished - Comprehensive basic inspection - Complete basic cleaning Itjdpfx Ameyyzp Hj Ejf - Electrical system checked - Immediately operational

Condition: like new (used), Year of construction: 2020, functionality: limited functionality, operating hours: 50 h, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 80 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 72 mm, saw blade diameter: 380 mm, height adjustment type: pneumatic, actuation type: electric, total length: 7,500 mm, total width: 6,000 mm, total height: 1,900 mm, overall weight: 5,000 kg, table height: 1,000 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, AES Alpha Heavy Duty Beam Saw 3200 * 3800 mm | Showroom Condition | Less 100 Hours Category: Panel Saw / Beam Saw Condition: Used – Like new showroom machine Description: For sale: AES Alpha heavy duty beam saw. The machine has been used exclusively in a showroom for demonstrations and training. It is in working condition with less than 100 working hours. Equipped with all Yaskawa and Schneider Electric drivers. Technical Data: Cutting width: 3200 mm Bridge depth: 3800 mm Main motor: 15 kW (20 HP) Scoring motor: 2.2 kW (3 HP) Max cutting height: 72 mm Saw carriage speed: 70 m/min Pusher speed: 60 m/min Max blade: 380 mm Max scoring blade: 200 mm 8 clamps AES Alpha Heavy Duty Paneelzaag 3200 mm | Showroomstaat | Minder 100 Werkuren Categorie: Paneelzaag / Opdeelzaag Conditie: Gebruikt – Zo goed als nieuw (Showroom) Beschrijving: Te koop: AES Alpha heavy duty paneelzaagmachine. Deze machine werd uitsluitend gebruikt in een showroomomgeving voor demonstraties en trainingen. De machine verkeert in uitstekende staat en heeft minder dan 100 werkuren. Uitgerust met hoogwaardige aandrijvingen van Yaskawa en Schneider Electric, wat zorgt voor maximale betrouwbaarheid en precisie. Technische specificaties: Snijbreedte: 3200 mm Brugdiepte: 3800 mm Hoofdmotor: 15 kW (20 HP) Voorritsmotor: 2,2 kW (3 HP) Maximale zaaghoogte: 72 mm Itedpfxsyzzgus Am Eof Zaagwagensnelheid: 70 m/min Duwbalk snelheid: 60 m/min Max. zaagdiameter: 380 mm Max. voorritsdiameter: 200 mm 8 klemmen Luchtkussentafel (3 stuks): 1 vast, 2 verplaatsbaar Pneumatische zaagwagen beweging Aandrijvingen: Yaskawa & Schneider Levering: Binnen 10 dagen mogelijk Prijs: Op aanvraag

Condition: used, Year of construction: 2009, Base machine: Table size: 850 mm x 1050 mm in grey cast iron for Basic, Classic, and PreXision models Table extension standard across the full table width Table height 900 mm Squaring table: Standard length 3000 mm, table length equals cutting length; position-independent locking; guides are hardened, wear-resistant, and self-cleaning; replaceable table lip; anodized aluminum design; Saw blade shaft: 30 mm Ø; digital speed display via control panel Maximum tool cutting width 15.5 mm / max. 5 mm for PreXision Saw blade change: Basic / Classic: quick-change system "SprintLock" PreXision: tool-free quick-change system "VLock" Saw blade diameter: 250 - 315 mm for Basic and PreXision; 250 - 400 mm for Classic Cutting width 850 mm Length stop: anodized aluminum design with continuous fence, fine adjustment with magnifier for both flap stop elements; scale for measurement display; length compensation for angle cuts with electronic support, cutting length 100 mm (PreXision 175 mm) - 2000 mm, extendable up to 3400 mm (PreXision 3220 mm) Cross table: galvanized steel design, angle cuts by scale without repositioning the stop; integrated fixed positions for 0°, 22.5°, 30°, and 45° cuts Support surface dimensions 1340 x 650 mm Parallel stop: made of anodized aluminum; removable in any position, foldable rule Guided by four groove ball bearings Extraction Riving knife protection hood Basic / PreXision Ø 60 mm, height-adjustable protection hood Classic Ø 100 mm; machine base Ø120 mm Minimum extraction air quantity: 21 m³/min (Basic: 18 m³/min) at 800 Pa Maintenance: maintenance-free bearings for height and tilt adjustment Prepared for retrofitting of scoring unit T6020 / T6021 Standard accessories: 1 squaring shoe on the squaring table, 4 Allen keys SW 3 / 4 / 5 mm, 1 return handle, 2 riving knives, 1 push stick, 1 liter oil VG46 Control: - Touch screen - 5.7" (145 mm) user interface for T60 Basic, Classic, and PreXision, color TFT (8 bit color depth) - Cutting height and angle electronically controlled, full integration of cutting height and angle into control system; positioning accuracy ± 0.05 mm or ± 0.05° - Integrated display of parallel stop position on T60 Classic and T60 PreXision - Additional electronically integrated and calculated axes (optional, max. 6 axes): electronically positioned cutting width (parallel stop) electronically positioned scoring width (scoring unit) electronically positioned scoring height (scoring unit) electronically positioned scoring position left/right (scoring unit) - Clear display and intuitive operation of up to three axes on HOME page - Calculation and digital display of tool position (cutting height / angle) based on stored tool data - Tool data memory for 10 tools - Fully automatic referencing of cutting height and angle axes - Controlled and manual movement of motorized axes possible - Display for speed, tool diameter, and actual cutting speed - Integrated calculator, integrated operating hours counter - Integrated operating menus for standard tasks such as groove and rabbet cuts, angle strips, groove and tenon joints - Diagnostic system with user information - Localization possible for all languages with Latin/Cyrillic character sets (Unicode/UTF-8) - USB interface for external backup of tool and machine data and for updates; supplied without US Ijdpfoy Dd Itsx Am Ejtf

Condition: used, Year of construction: 1990, power: 5.5 kW (7.48 HP), cutting height (max.): 105 mm, cutting width (max.): 1,250 mm, saw blade diameter: 350 mm, height adjustment type: hydraulic, rotational speed (max.): 6,000 rpm, rotational speed (min.): 3,000 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,600 mm, overall weight: 800 kg, Equipment: scorer, No. 04510 Sliding table saw Altendorf F 45 Used, year of construction 1990 Sliding table length 3200 mm Maximum cutting height 105 mm Maximum saw blade diameter 350 mm Cutting width 1250 mm Main motor 5.5 kW Speeds 3000 / 4000 / 5000 / 6000 rpm Scoring unit Hydraulic saw blade tilt Hydraulic cutting height adjustment New hydraulic cylinder for cutting height adjustment (365,- € excl. VAT) Main saw motor brake defective Transport dimensions approx. 3300 x 2000 x 1600 mm LWH Weight approx. 800 kg Itodpfey A Npgex Am Esf To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex warehouse

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and technical specifications: Roller diameter: 500 mm Motor: 1.8 kW Connection: 430 V Upper precision guide Lower guide Telescopic blade guard Cast iron bandsaw wheels Cast iron table, tiltable up to 36° With automatic motor brake Blade tension indicator Maximum cutting height: 260 mm Maximum cutting width: 480 mm Extraction port: 100 mm Dimensions (L x W x H): 965 x 660 x 1925 mm Weight: 280 kg Availability: short-term Itedpfxey D A Tze Am Eef Location: Röllbach

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. Machine details to follow… Ijdpfjylp S Eex Am Estf Location: Friedeburg area Dismantling and delivery available at extra cost.