Condition: used, Year of construction: 2009, back gauge: 750 mm, sheet thickness steel (max.): 4 mm, cutting length (max.): 2,550 mm, Motorized Guillotine Shear Manufactured by Durma, Type MS 2500 x 4 mm Year of Manufacture: 2009 Technical Specifications Manufactured by DURMA Type: MS 2504 Year of Manufacture: 2009 Sheet Thickness: 4 mm Cutting Length: 2,550 mm Cutting Angle: 1°30' Stroke/Min: 42 Motor: 7.5 kW Backgauge: 750 mm Dimensions: L 3.15 x W 1.75 (plus support arms 0.6 m) x H 1.33 m Weight: 3.3 t Features - Controlled backgauge 750 mm Debjv Rntzs E Sdxveut - Support arms - Angle stop - Manual cutting gap adjustment - Foot switch - Operating instructions All information is provided without guarantee. A demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Dusb E Sovkw Dvjdxvjt Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2022, Condition: new, NEW Ironworker • 65 tons pressing force • Double footpedal with emergency stop for working with 2 operators simultaneous • 2 individual acting cylinders • Punching • Easy removable punches • Cutting angle steel, flat bar, round- and rectangular bar Djb E Sdxjiinn Ievsut • Notching

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, laser power: 5,000 W, laser hours: 34,647 h, input voltage: 400 V, input frequency: 50 Hz, Equipment: cooling unit, Trumpf TruLaser 3030 with LiftMaster Compact - used, fully functional For sale is a Trumpf TruLaser 3030 with LiftMaster Compact, built in 2013. The machine is fully functional, ready for use and has been serviced exclusively by Trumpf, which ensures high reliability and very good condition. Technical data: - Laser power: 5,000 W - Operating hours: 74,617 h - Laser hours: 34,647 h - Input voltage: 400 V / 50 Hz - Max. sheet size loading/unloading: 3,000 mm x 1,500 mm - Max. stack height: 90 mm (loading side) / 250 mm (unloading side) - Regular maintenance by Trumpf - Cooling unit available Standard equipment: - Closed machine frame with integrated laser unit - Movement unit for high-precision processing - Torque drive in combination with linear direct drives - Closed beam guidance & single-cutting head strategy - Automatic pallet changer in longitudinal direction - Wide longitudinal conveyor belt for efficient material handling - 17" touch color screen for convenient operation - Work area lighting & positioning laser diode - Spraying device for optimal cutting quality - FocusLine, NitroLine, PierceLine for flexible cutting processes - Cutting head with LensLine technology (250 mm focal length) - Universal cutting head quick-change device (UTI) - ControlLine for precise control Control & software functions: - Simple/extended workshop programming - Fast re-production & integrated technology data - Automatic shutdown & production plan - Programmable cutting gas and pressure selection - SprintLine, ContourLine, MicroWeld, FastLine, AdjustLine - Teleservice & diagnostic functions - Online help & FlyLine for optimized processes Safety & extraction systems: - CE marking - Light barriers & laser monitoring system - Multi-chamber extraction system & compact dust extraction system - Machine cladding with Makrolon panes - Advanced machine equipment: - Automated technology package for lens and nozzle automation Dueb E Sjv Aubvsdxvet - Nozzle changer - LensLine with automatic status control - Beam centering - BrightLine for optimal cutting quality - Cooling group heating for constant process conditions Important information about the sale: - The machine must be dismantled and picked up between June 1st and 14th, 2025. - Dismantling and transport are to be carried out by the buyer. - A forklift (min. 2 tons) with driver for removal must be provided. - The crane is to be provided by the buyer. Subject to change. For further information or a viewing, please contact us.

Condition: new, Year of construction: 2023, pressure 150 t chamfer lenght 3100 mm distance between columns 2600 mm dayligth 450 mm throat 350 mm stroke 265 mm working feed 9,8 mm/sec Control DELEM DA 66 T total power requirement 22,5 kW weight of the machine ca. 10000 kg dimensions 4000 x 2200 x 2800 mm • Basic version as a C-frame • Compact table model • Ideal for prototypes and small series Dujb E Ssv H Eqcedxvot • Very short setup time • Functionally simple • Wide range of applications • Low noise level • Low energy consumption • Easy handling including special equipment: - CNC control DELEM DA 41T

Condition: used, sheet thickness - max. 1,5 mm Roller stands 7 speed 15 m/min total power requirement 2,2 kW weight of the machine ca. 260 kg dimensions of the machine ca. 1,5 x 0,6 x 1,15 m Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steel housing in which the drive motor is housed. Machine rollable. A roller set is the Pittsburgh counterpart on the other side - see Photo 7. The buyer must obtain the appropriate roller set. Selling due to owner's illness and retirement. Machine dealer with own stock of 1600 m². Dsb E Sdxeucpmujvout

Condition: excellent (used), Year of construction: 1991, pressing force: 200 t, throat depth: 350 mm, Hydraulic press brake Fab. EHT Type. EHPS 20-30 Year 1991 Technical data Make: EHT Type: EHPS 20-30 Year of construction: 1991 Effective length: 3050 mm Distance between uprights: 2,550 mm Stand projection: 350mm Lift: 250mm Capacity: 200 tons Dimensions: approx. L 4.25 x W 2.0 (+ bending aids) x H 3.12 m Weight: approx. 14.5 tons Equipment - Manual die displacement - Controlled axes: X, Y1, Y2 - 2 bending aids - R axis - pneumatically adjustable - DNC 30 control unit - Automatic top tool clamping - Tools can be changed vertically - Crowning manually adjustable - Safety light barrier Akas from Fiessler retrofitted - Tool package according to photos: - Upper tool height 220mm/R5, length = 5 x 500 + 550 mm - Upper tool height 220mm/R2, length = 2,800 mm, sectioned - Cranked upper tool, R5, length = 2,175 mm, sectioned - Die block with V65, V10, V18, V22, V16, V40, V50 All data without guarantee. Dob E Ssrzq Daedxvjut A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Used hydraulic bending machine for pipes, profiles Ercolina CE40H2 Hydraulic movement of the upper roller Driven 2 lower rollers Shaft diameter: 40 mm Machine weight: 300kg Year of manufacture: 2007 Dsb E Sdxsvtfkpsvout The machine has original adjustable rolls for flat and square workpieces. In addition, two sets of original rolls for: 1", 3/4", 1/2" and 1"1/4" pipes are included.

Year of construction: 1984, Condition: excellent (used), Machine in good and neat condition. Easy to operate Delem back gauge control. Cutting gap manually adjustable. Back gauge spindles/nuts overhauled. Specifications: Cutting length 1250mm Cutting capacity 4mm steel Delem backgauge controller Strokes/hour counter Deb E Sjiivxfedxveut Year of manufacture 1984

Condition: excellent (used), Year of construction: 2006, Ercolina CML TB-76 Pipe Bender Duobeu H Ibno E Sdxvet Excellent condition Year 2006 Foot Pedal Weight 193kg Power supply - 415v/3 phase

Condition: like new (used), Motorized swivel bending machine 1520x6 mm Back stop Central lubrication Djb E Sdxjvuhrrovsut

Condition: used, sheet thickness - max. 1,5 mm Roller stands 7 speed 15 m/min total power requirement 2,2 kW Dobotugiqs E Sdxvout weight of the machine ca. 260 kg dimensions of the machine ca. 1,5 x 0,6 x 1,15 m Forming head made of two divided all-steel side links between which the shafts run in needle bearings on both sides. The head is mounted on an all-steel housing in which the drive motor is housed. Machine rollable. A roller set is the Pittsburgh counterpart on the other side - see Photo 7. The buyer must obtain the appropriate roller set. Selling due to owner's illness and retirement. Machine dealer with own stock of 1600 m².

Year of construction: 2011, operating hours: 18,595 h, Condition: ready for operation (used), General Data Measurements width 4600 Measurements depth 9950 Measurements height 2400 Machine weight 12000 Control Unit Brand SIEMENS Model Sinumerik 840 D Dueb E Sdswhgqxoxvjt Main Drive Spindle speed range 300 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 115 mm Max Material Thickness Steel 20 mm Stainless steel 15 mm Aluminium 15 mm Additional Equipment Closed machine frame with an integrated laser unit Torque drive combined with direct linear drives Enclosed beam delivery via fiber optic cable Water-air chiller for machine cooling Integrated electrical cabinets with internal lighting Automatic pallet changer (lengthwise installation) Power supply through TruDisk integrated into the machine Working area lighting Wide longitudinal conveyor Positioning laser diode This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Application Types Cutting

Year of construction: 1968, Condition: good (used), for aluminium strip width: max. 1.050 mm Djb E Sdsgryk Nsxvjut strip thickness: 10 - 20 mic

Condition: good (used), Model 200/4 FIXED ANGLE TO 90º Main Technical Data Blades length 200 mm Maximum thickness R=42 Kg/mm² Maximum thickness R=60 Kg/mm² Strokes/min. at 250 mm of cutting lentgh 52 Three phase motor 3 HP Dusb Esp R Sr Ij Sdxvst Tank oil capacity 35 l Working table 750 x 530 mm Dimensions (L x W x H) 750 x 600 x 1.020 mm Approximate weight 480 kg - Blade clearance adjustment automatic for thickness from 0,5 to 4 mm - Automatic operation by means pedal or by impulse - Mechanical adjustment of vertical travel

Year of construction: 1989, Condition: good (used), strip width: max. 1.840 mm strip thickness: 0,3 – 3 mm blade shaft Ø: 224 mm blade Ø: 350 mm Deb Eog Iih Ne Sdxveut

Condition: good (used), Year of construction: 2003, Trumpf Trumatic L3020 Co2 Laser Fully working condition - removed from working factory Working Range X axis - 3000mm Y axis - 1500mm Z axis - 115mm Overshoot range X axis - -16- +88 Y axis - 19 - +61 Z axis - - 2 - +16 Max Travel range X axis - 3104mm Y axis 1580mm Z axis - 117m Dsbst H Iv Rs E Sdxvjut Control - Trumpf CNC Control based on siemens sinumerik 840D Electrical Connections with TLF 3200 - 73 kVa Fuses (at 400v) - 125A Speed - Max. positioning speed, Parallel to axis - 60m/min Simultaneous - 85m/min Accuracy - smallest programmable increment. Positioning accuracy - +0.1mm Repeatability - +0.03mm Max laser power in cw mode with TLF3200 - 3200W Max material thickness - 20mm

Year of construction: 2002, Condition: excellent (used), V dimensions: 1.200 x 700 mm coil weight: 25 t stroke: 700 mm Djb E Sdxslimtksvjut

Year of construction: 1988, Condition: good (used), coil weight: 10 t Debslimtvo E Sdxveut arm length: 1.400 arm Ø: 300 mm coil OD: max. 1.300 mm

Year of construction: 1990, Condition: good (used), coil weight: max. 15 t coil OD: max. 1.800 mm Dueb E Sdxslimuhsvot

Year of construction: 1999, Condition: good (used), sheet width 500 – 1.600 mm Dujbjbh Dtws E Sdxvst sheet length max. 4.500 mm stacking weight max. 3 t stacking height (with pallet) max. 500 mm speed max. 40 m/min.

Year of construction: 1988, Condition: good (used), 18 stations shaft Ø: 89 mm Duob Esbh H T Ij Sdxvet strip width: 600 mm strip thickness: 3 mm

Year of construction: 1986, Condition: good (used), strip width: max. 200 mm strip thickness: 0,1 - 1 mm Djb Eebh Ucbe Sdxvjut coil weight: 0,5 t mandrel Ø: 304 mm

Year of construction: 1983, Condition: good (used), strip width 1.600 mm strip thickness 0,3 - 3 mm reference material (tensile strength) 420 N/mm² Dusb E Sdxsbidg Eovst speed 68 m/min. at 6.000 mm plate length 23 m/min. at 400 mm plate length

Year of construction: 1972, Condition: good (used), strip width: max. 830 mm Duob E Sdxobx N Slsvst strip thickness: 0,3 - 4 mm blade shaft Ø: 140 mm No. of slits/material thickness: 25/0,5 mm 4/4 mm