Condition: used, Year of construction: 2021, Automatic Saw-Milling Machine Langzauner LZ5-2A 3050 The machine is designed for cutting and levelling veneer, wood boards, chipboard, MDF, or fine-structured wood-based panels. Technical data: - cutting length: 3050 mm - cutting height: 40 mm - saw blade diameter: 180 mm - main motor: 2.2 kW - max. feed speed: 25 m/min Nwedpfx Aoxfidyed Hjp - stepless feed adjustment - rear table - rear stop - total connected load: 4.2 kW - machine weight without table: 850 kg - required space: 5500x700x1700 mm Condition: used, requires technical inspection

Condition: used, Year of construction: 2006, functionality: fully functional, For sale Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600! Tech. data Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW Nwsdpfx Adjumlino Hjp

Condition: like new (used), Year of construction: 2004, working width 2700 mm working height 100 mm hydraulic cutting gauge adjustment to size cast body Njdpoxcn Dtsfx Ad Hjwp power supply 400V 3000 kg Year of manufacture 2004

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head cutting length 3050 mm with rear support and fence Nwsdpfx Adon An A To Hop

Year of construction: 1980, condition: used, saw cutter for veneer Nodjdnprdjpfx Ad Howp CUTTING TOOLS ADVANTAGES - German production - almost - very good condition - guillotine used - high quality, low price cutting length 3100mm pneumatic clamp + cutting height 50mm up / down saw adjustment with cutter + manual travel of the aggregate + Equipped with a back panel + dimensions of the worktop 2450x800mm engine power about 2kW Dimensions Length / Width / Height 4670/900 / 1300mm weight 650kg

Condition: excellent (used), Veneer splicing machine Model : KUPER FWJ 920 In very good condition. Njdpfx Aetq Ey Tod Hjwp

Condition: excellent (used), Year of construction: 1992, I sell the double knife veneer guillotine Josting ZFS 2800. Year 1992 / fully reconditioned 2007. Cutting length 2810mm. Cutting height 80mm. Cutting width 20-470mm. Nodpfxevxli As Ad Howp Very good condition. Available immediately.

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer crossfeed splicing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Compressed air 6 bar Nedpfxoumrf As Ad Hjwp Glue types PVAc or UREA based

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min Nodpsg Nn E Nofx Ad Hswp veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1994, functionality: fully functional, cutting length (max.): 3,100 mm, cutting height (max.): 45 mm, overall weight: 2,300 kg, Veneer shears with a maximum cutting length of 3100 mm Nwedpfov Nzpmjx Ad Hsp Maximum thickness 45 mm Built in 1994 With spare blade

Condition: like new (used), Binder with glue thread Zigzag stitching Heater with air blower Foot pedal control 380V power supply Nwedpfx Adswnff Is Hop

Condition: ready for operation (used), Year of construction: 2025, Main Drive Pressing force 1200 kN Additional Equipment Mylar Foil Attached to Upper and Lower Press Plates Electronic Flatness Control (EFC) for Incorrect Loading Protection This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information. Njdpfx Aowvm Rbjd Howp Application Types Pressing / Laminating

Condition: new, Year of construction: 2024, FULL AUTOMATIC HORIZONTAL BAND SAW WRC1050 FOR CUTTING VENEER - SERVO – PERFORMANCE, DOUBLE CUT EFFICENT FAST CUTTING WITH HIGH CUT PRECISION Nwedpsghrnbsfx Ad Hop with FAST CENTRATION and FAST TURNING system

Condition: used, Kuper FW 630 Mini The ideal machine for small veneer quantities with the technical advantages of all KUPER zig-zag gluing machines: Discus disks with tolerance compensation mechanism. The gluing medium is a KUPER special glue thread. The glue thread is automatically applied in a zig-zag line and guarantees tight and firm joint connection. The glue line is applied during pressing inwards during pressing, which means that the adhesive does not need to be sanded off. Nwodjbi I Apepfx Ad Hsp is no longer necessary. Technical data: Stand design 630 mm Veneer thickness approx. 0.4 - 2.0 mm Feed rate approx. 7 m/min Operating voltage 230 V, 50 Hz/60 Hz Total connected load 110 VA Space requirement 1050×905 mm = 0.95 m² Total height 475 mm Net weight 95 kg Gross weight 110 kg always 10 pieces in stock FW 420 FW 630 FW 920

Condition: good (used), functionality: fully functional, ANGELO CREMONA DRYER model ER 18, 4400mm, 3 levels, steam steam consumption at 10 bar - 2200 calories/hour water consumption at 185° - 1100000 calories/hour PRODUCTION birch thickness 1.2mm initial humidity 80% final humidity 6% load 85% Nwsdpfx Adsvndvye Hjp 4.2 m3/hour Installed power Kw 95.5 Machinery dismantled, requires overhaul.

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Nwodpfxswmxmvj Ad Hep Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Manually adjustable with scale; Optionally available with digital display or motorized adjustment Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Safety features: Two-hand operation Emergency stop Protective covers Electrical connection: 400 V / 3 Ph / 50 Hz Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Tape (paper) width 6 mm Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Nsdpoumrgaofx Ad Hswp Electric energy 1,1 kW Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: ready for operation (used), Year of construction: 1998, Additional Equipment Motorized infeed table with PVC belt Motorized loading table for manual assembly of the panels and automatic loading into the press on the 3500 mm side Heating plates made of solid steel, drilled and machined on all sides Automatic loading and unloading of the panels on the 3500 mm side This ITALPRESSE DS 130 was manufactured in 1998. A robust veneer press featuring a motorized infeed table with a PVC belt and an automatic loading system for efficient panel handling. It boasts a maximum total lifting force of 110 tons and a heating plate size of 3500 x 1400 mm. Ideal for high-quality veneering processes. Contact us for more information about this machine. Application Types Nwedpfxowzn D He Ad Hsp Pressing / Laminating

Condition: ready for operation (used), Year of construction: 1978, Höfer veneer saw incl. joining milling unit Cutting and milling length 3550 mm Cutting height 45 mm Saw motor power 2.2 kW Milling motor power 1.1 kW Extraction channel Workpiece clamping by handwheel Nwsdpfxjwq D Tps Ad Hep Year of manufacture 1978 Price 2800.-

Condition: good (used), Year of construction: 1999, functionality: fully functional, SHEARLING SYSTEM consisting of: Loader Centering 1. model CE08 2. Angelo Cremona 3. Positions the log for loading on the peeler 4. Power supply 400Vac/50Hz – 50kW Max. hydraulic pressure 100 bar Compressed air consumption 0 L/min Weight kg Max. dimensions 600x300x400 5. Production capacity 4 logs per minute Peeler 1. model SFH870 2. Angelo Cremona 3. Obtains a wooden strip from the turning of the log Nsdpfx Adjvm An Ej Hjwp 4. Power supply 400Vac/50Hz – 240kW Max. hydraulic pressure 100 bar Compressed air consumption 10 L/min Maximum dimensions 600x400x300 5. Production capacity 50 cubic meters per shift Cutting and selection line 1. model TSR27 2. Angelo Cremona 3. Transports the peeled strip to the cutter for optimized cutting of the sheets 4. Power supply 400Vac/50Hz – 70kW Max. hydraulic pressure 100 bar Compressed air consumption 0 L/min Maximum dimensions 300x200x200 5. Production capacity 50 cubic meters per shift Sorting line and vacuum unloader 1. model LTR27 2. Angelo Cremona 3. Separates and stacks the recovery sheets from the whole sheets to size 4. Power supply 400Vac/50Hz – 180kW Compressed air consumption Maximum dimensions 300x1300x500 5. Production capacity 50 cubic meters per shift

Year of construction: 1995, condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal Nwjdpfshbp Ifox Ad Hsp feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Njdet Akcfepfx Ad Hswp Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Stacking device DA-2200 Veneer format length (longitudinal to the fibre) 600 * - 1500 mm Veneer format width (transverse to the fibre) 500 * - 2200 mm Maximum stacking width for output on the - right-hand side 2200 mm - left-hand side 2200 mm - back 1500 mm Stacking height max. 500 mm Power consumption from FZR-15 Weight 1200 kg Lifting table 2500 mm L x 1200 mm W. 1000 kg

Condition: ready for operation (used), Year of construction: 2017, Additional Equipment Hydraulic unit with pump, oil tank, and valves for operating the pressure and auxiliary cylinders Hydraulic control unit located at the upper part of the press for maintenance ease Control panel with buttons, selector switches, and a pressure control gauge This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information. Nsdpfowzn Dyex Ad Hswp Application Types Pressing / Laminating

Condition: ready for operation (used), Kuper FWJ900 With glue thread, well-maintained condition Max. veneer thickness 2 mm, min. 0.4 mm Control via foot pedal Stand model, feed speed 7 mm, Nwedpfjvrk Siox Ad Hjp Projection 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm

Condition: ready for operation (used), Year of construction: 2025, Main Drive Nwedpfswzn Edex Ad Hjp Stroke 400 mm This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Application Types Pressing / Laminating