Condition: good (used), Year of construction: 1961, functionality: fully functional, Width: 1.400 mm Hedsvc Dbfepfx Aaajk To be dismantled by buyer

Condition: good (used), functionality: fully functional, with heating wire, outreach 920 mm, material 0.4-2 mm, feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Price ex works Hjdoyayzajpfx Aaajk Transport possible at extra cost!

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4712, functionality: fully functional, pressing force: 120 t, number of cylinders: 6, cylinder diameter: 90 mm, pressing speed: 200 mm/s, TECHNICAL DETAILS Maximum pressure: 120 t Pressing area dimensions: 2,500 x 1,300 mm Pressing height: 200 mm Number of cylinders: 6 Cylinder diameter: 90 mm Pressing speed: 12 m/min Hjdpfxoyuxh Ij Aaajk EQUIPMENT Complete line with: Loading system Gluing machine Destacker High-frequency cabinet (offered separately)

Year of construction: 1975, condition: good (used), functionality: fully functional, Peeling machine / Centering-Charging device Peeling machine Angelo Cremona SFL 2700 x 1100 - 1975 Centrering and Charging device CTA 4 - 1976 Hedet D A S Iepfx Aaaek Veneer unwinding Bertram - 1995 To be dismantled by buyer

Condition: excellent (used), Year of construction: 2002, Mayer FH2-3120 Veneer Saw, precision saw with jointing unit (planer unit) and veneer stop table Robust construction by Mayer A video of the machine in operation can be provided upon request. For tear-free and seamless cutting of veneer, including thick veneer cuts Maximum cutting length: 3100mm Hjdpfx Aoyug Hrsaaek Saw unit and jointing unit are combined in a single assembly, so only one unit needs to be moved. Easy-to-operate saw unit, runs on linear guides. Rear support table with through finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor 1.8kW, planing unit 1.0kW Motors can be conveniently switched on at the handle – they only run when needed. Fine-cut saw blade with carbide tips, sharpened Planing head Z4, equipped with new carbide indexable inserts Practical front veneer storage, extendable for the planing unit Extraction connection 100mm with extraction duct Extraction hoses and drive belts renewed Compressed air maintenance unit replaced CE mark Operating manual Onboard tools Original paintwork, only minor touch-ups Dimensions approx. 4350 x 1700 x 1400mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse, see 'more offers from this supplier.'

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Hjdpfx Aasxgbwzsaok Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: ready for operation (used), Year of construction: 2003, Veneer press manufactured in 2003. This PREISS U HORTSTMANN KP-5-CNC + ZWA-1-CNC + Buffer features workpiece dimensions with a cabinet height ranging from 300 mm to 2500 mm, a width of 300 mm to 1200 mm, and a depth of 160 mm to 700 mm. It requires a minimum room height of 3700 mm and operates at a working height of 930 mm. If you are looking to get high-quality veneer processing capabilities, consider the PREISS U HORTSTMANN KP-5-CNC + ZWA-1-CNC + Buffer machine we have for sale. Contact us for further details. • Workpiece dimensions • Cabinet height: 300–2500 mm • Cabinet width: 300–1200 mm (smaller widths possible manually with fillers) • Cabinet depth: 160–700 mm • Max side thickness: 56 mm (including fittings) • Operational requirements • Power supply: 400 V ±10%, 50 Hz, 3-phase, approx. 10 kW • Compressed air: 6–7 bar, oil-free and dry • Space/ergonomics: Minimum room height 3700 mm; working height 930 mm • Visual configuration (RAL colors) • Machine and control cabinet: RAL 7032 Kieselgrau • Supports and safety guards: RAL 3000 Feuerrot • Motors and extraction hoods: RAL 9005 Mattschwarz Additional equipment • Buffer system • Roller conveyors (Roba) • Roba_11: ~2800 mm length, 700 mm usable width; split round-belt drive; two 0.55 kW motors; 60 m/min; 1 fixed end stop + 1 controllable center stop • Roba_12: ~2800 mm length, 700 mm usable width; 0.55 kW motor; 60 m/min; primary operator controls (Start/Stop, Emergency Stop) • Rollers: Ø60 mm, plastic-coated; pitch 128 mm • Working height: 930 mm (±20 mm) • Cross conveyors (QF) • QF_11 and QF_12: 8 toothed belts; 0.55 kW motors with frequency inverters Hodpfjyvhlmsx Aaaok • Speed: 40 m/min at 50 Hz • Operation: Pneumatically tiltable (hoch schwenkbar) • Total transverse width: ~1720 mm • ZWA-1-CNC unit • Workpiece dimensions: cabinet height 300–2500 mm; width 300–1200 mm; depth 160–700 mm • Operational: Electrical and compressed air supplied via downstream carcass press • Working height: 930 mm • Space: Minimum room height 3700 mm • Construction: Solid, torsion-resistant frame with precision guides for lifting table

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Storage location: Nattheim Hjdpevvkazjfx Aaajk

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Hsdpfx Aovvkblsaaok Storage location: Nattheim

Condition: used, total length: 2,800 mm, total width: 1,100 mm, total height: 2,250 mm, - Documentation available: No - CE certificate present: No - Number of glue rollers [pcs]: 4 - Roller material: Rubber - Roll diameter [mm]: 230 - Max. working width [mm]: 1600 - Transport dimensions: 2800mm x 1100mm x 2250mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hsdpfx Aasxz E Awsajk Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, column arm 420 mm Feed speed ca. 6 m/min. Veneer splicing machine Kuper type FW/Mini for precise gluing and splicing of veneer sheets with glue thread. Ideal for smaller businesses or flexible use in the production of high-quality veneer surfaces incl. adhesive thread posts. Hsdpfxjwrfbdo Aaajk

Condition: excellent (used), Year of construction: 1987, Max Cutting length : 2250 mm Automatic backstop, max depth : 800 mm Manual handwheel for accurate measurement 2 hand operated 2 x laser fence Hodoyurl Tepfx Aaask Green light indicator on cutting point 2 x extra cutting knives included Ask for WHATSAPP video presentation

Condition: good (used), Code: 0240 Brand: KUPER Model: FW /J 900 Hjdpfx Aasyxmrwjaok Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Hedjx Upgcspfx Aaask

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net) Hedodzqnyspfx Aaaok

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Hsdpfxsyalmbe Aaaek Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm²

Condition: ready for operation (used), Year of construction: 2006, This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Cutting length: 2600 mm • Cutting widths: 45 - 350 mm • Pressure beam opening: 100 mm • Pressure beam width: 350 mm • Parallel fence with digital read-out: 25 - 1000 mm • Cutting angle approx. : 45° • Movable laser lines: for optimizing veneer yield. The manually operated laser line for the position of the front blade is quickly set. The veneer width is transferred to the computer at the push of a button, and the cutting process starts automatically. Extra Information Features: Solid, heavy duty built with generously-dimensioned pressure beam and cutting table to absorb the high clamping and shearing forces. Unique system with fixed, solid cutting table and movable pressure beam. Laser lights for exact visual identification of cutting lines. Quality hydraulic system with large oil tank. Electric-motor-driven parallel stop with rapid adjustment. Industrial computer based on Windows operating system, wide screen and keyboard. Various modes of operation and storable program operations. Hedpfex Nrmbsx Aaask Extensive collection of production data. Central lubrication unit.

Condition: ready for operation (used), Year of construction: 2007, Veneer splicing machine manufactured in 2007. This KUPER FLI model is designed for precision veneer splicing. It operates at a voltage of 400 V and a rated current of 14.5 A. If you are looking to get high-quality veneer processing capabilities, consider the KUPER FLI Veneer splicing machine we have for sale. Contact us for further details. • Electrical supply: 400 V, 50 Hz, 3 Ph • Rated current: 14.5 A Hjdoyn Nq Hspfx Aaask

Condition: ready for operation (used), Year of construction: 2019, This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine. Machine Benefits Hedpfx Aaox U Tv Ieaok Technical Machine Benefits • For connection to existing heating system / pressing temperature up to 90°c / the fabricated steel platen can take a maximum pressure of 5kg/cm²Plate: 110 X 240 cm, 120T, 5kg/cm2

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Application Types Hodpfsx D E Avox Aaaek Pressing / Laminating

Condition: excellent (used), functionality: fully functional, Veneer Splicer Kuper FW 1150 Working width: 1150 mm Veneer thickness: 0.4-3 mm Feed speed: 10-30 m/min Zigzag stitching Hsdpfxsyylacs Aaajk Year of manufacture: 1997 CE mark Weight: 520 kg

Condition: good (used), Code: 0263 Brand: MONGUZZI Model: TRC - MP 4200 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy base structure Large heavy presser for ideal clamping of all types of veneer High-quality steel blade with high wear resistance Can be operated in both automatic and manual modes Hydraulic control unit Second control panel for end trimming Automatic rear register with electronic programmer 1500 mm Cutting length 4300 mm Max register depth 1500 mm Min register depth 25 mm Useful presser opening 80 mm Presser width 360 mm Hjdpfx Aajx Hfr Seaok Cutting time 4 sec Safety photocell barriers Power 10 Kw Work surface height 910 mm Overall dimensions : machine mm 5700 x 1300 x 1800 h - Rear register mm 3500 x 2000 x 300 h Weight kg 6500

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Hjdpfxoxgqmxs Aaaok Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: ready for operation (used), functionality: unexamined, total height: 1,200 mm, total length: 1,050 mm, total width: 480 mm, overall weight: 95 kg, with base frame Hodpfxeyuf Ine Aaaok throat depth 630 mm workpiece thickness 0.4 - 2 mm feed rate approx. 10 m/min.

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 3/3320, cutting length (max.): 3,050 mm, Cutting length 3050 mm Rear stop Hjdpfx Aeyv Uv Ssaaok Pneumatic pressure beam