Condition: used, Year of construction: 2006, Functionality: fully functional, 2 Filter installations on a large frame, the waste material is sucked away by means of a transport fan. The filter system is equipped with filter bags and access doors. The filter hoses are mechanically cleaned with a shaking system. 2 exchange containers can be placed under the frame to store the waste. First commissioning 2006 2 Filter systems incl. rotary valve 1 fire extinguishing system "dry" 1 transport fan 15 kW indirectly driven 1 main fan 30 kW indirectly driven, volume flow 21382 m3/h, 1750 rpm at 50 Hz 1 main fan 37 kW indirectly driven, volume flow 25,447 m3/h, 1750 rpm at 50 Hz 1 magnet for removing iron from the air stream Doliev Rdubjntptocg 1 central switch cabinet for 2 filter systems Per filter system: - Filter surface 218 m² - Filter hoses 132 pieces (renewed approx. 3.5 years ago) The filter system has already been dismantled and is stored in parts.

Condition: good (used), Klein & Söhne Surface Planer 4-knife cutter block Planing width: 510 mm Dcolintjwgwp Njptog Table length: 2840 mm Feed table: 1600 mm Discharge table: 1200 mm Slotted table lips Dimensions: length / width / height: 2840 x 950 x 1000 mm Weight: 950 kg

Condition: excellent (used), Year of construction: 2003, Pressure beam for clamping workpieces up to approx. 80 mm thick. Particularly interesting for miter cuts and veneer trimming. For a secure hold of the workpiece on the sliding carriage. For 300cm long sliding table or longer. Maximum clamping length approx. 290cm Dcolinou Ivynetptjg The pressure beam can be mounted on the newer machines with steel guides, but also on machines with Pertinax guides. The pressure beam is divided into two parts and can be controlled separately. The saw in the photos is of course not for sale. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this vendor".

Condition: excellent (used), Table milling machine type 59F Milling stop with fine adjustment Dcjlintewgb Ipjpteg left/right rotation Good condition, cast iron machine 30 mm spindle

Condition: used, 0 0,4 - 2,0 mm Workingpiece thickness from to 10 - 40 mm Total length 3100 mm Feed speed 7 m/min. Bi-Matic edge banding machine Type Prima 6.2 r.a. - Partnership Edition ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 2mm min. Panel width (without rounding unit): 70 mm min. Panel width (with rounding unit): 120 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 40 mm Feed speed: 7 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing cutterhead. Cross-cut saw unit 1 motor, 2 saw blades Radius trimming unit, with Easy Set adjustment system Rounding unit (copy trimming unit) with 2-position turret. The complete unit can be inserted and removed pneumatically. Including suction device with chip collection box for scraper chips. Radius scraper unit can be inserted and removed, incl. - Suction device with chip collection box for scraper chips - with Easy Set adjustment system - 2 numerical displays Flat scraper unit with 4-fold usable scraper knives. The unit can be inserted and removed. Dolintowgwl Reptocg General equipment: - Control panel with 7'' touchscreen - High-gloss package: Roller scanning for radius trimming unit, radius scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue tray - Interior lighting - Teflon-coated glue pot with energy-saving mode in standby mode - Glue roller with screw conveyor for long and high workpieces - Pressure zone with motorised 1st steel pressure roller + 1 rubber roller - Roller snipping shears for edges 44 x 2 mm ----- Price of the above machine on request! ----- Options with surcharge: Glue tray with quick-change system and 2nd quick-change glue tray, EUR 2,990.00 Additional quick-change glue pot for, EUR 2,590.00 Freight costs, complete, incl. delivery and installation. Including intensive training of operating personnel, EUR 3,750.00 ----- No original picture, picture shows identical model! (technical data according to manufacturer - without guarantee!) All prices quoted are net plus VAT.

Condition: ready for operation (used), Year of construction: 2004, For those who want to cut their own forest economically and efficiently! Band sawmill with electric height adjustment and feed. Includes bandsaw blade sharpener and tooth setting machine and a number of saw blades. Dslinowhyl Aotptjcg Electric height adjustment and feeding unit. Total length 9200 mm.

Condition: used, Year of construction: 2020, No. 3219 CNC machining center HOMAG CENTATEQ P-110 Venture BMG110/31/F/R Used, year of construction 2020 CNC-controlled processing center in moving gantry design, for milling and drilling workpieces made of wood or wood-like materials Travel speeds: X/Y-axis 60 m/min / X-axis 35 m/min / Y-axis 50 m/min / Z-axis 15 m/min - Program-controlled suction hood - Max. workpiece length, all units: single loading 3100 mm / pendulum loading 1025 mm - Max. workpiece length, tool diameter 25 mm: single loading 3275 mm / pendulum loading 1025 mm - Max. workpiece width, front stop: All units 1250 mm / milling tool diameter 25 mm 1250 mm - Maximum workpiece width, rear stop: All units 1230 mm / milling tool diameter 25 mm 1405 mm - Workpiece thickness: Max. 260 mm including clamping device - Operating voltage 400 Volt, 50 Hz - EC conformity (CE) - BUMPER safety technology with pressure-sensitive switching buffers in accordance with EN1760-3 - Drilling gear V12/32MM High Speed 7500, 1500 - 7500 rpm frequency-controlled, 2.3 kW - Grooving saw 0°/90° tiltable, 1500 - 7500 rpm frequency-controlled - H4X drilling unit, 1500 - 7500 rpm frequency-controlled - Drilling unit H2Y, 1500 - 7500 rpm frequency-controlled - Processing spindle 12 kW DRIVE5CS, frequency converter for electronic speed control from 1500 - 24000 rpm, 12 kW for S6 operation, 9 kW for S1 operation - Unit carrier for two Z-axes - Tool changer magazine 8 places at the rear - Linear tool changer fixed on the side 10 places - Tool length control - Tool holder saw DRIVE5CS - Fine-cutting saw blade diameter 350 mm - Basic structure raster table /31 - Raster table top - Lateral and longitudinal stop pins 140 mm - Two-part vacuum system for pendulum operation - Vacuum connection for templates - Supply unit for pneumatic clamping elements, right and left working field - Laser positioning aid - Vacuum clamp for grid table 140 x 130 x 45 mm LBH - Multi-clamp for R-table 10 - 100 mm - 10 m sealing cord diameter 8 mm for grid table - Vacuum system 290 / 345 m3/h - Energy saving function - POWERCONTROL with POWERTOUCH Dcelintpewhwqveteg - PC keyboard: German - USB hard disk for image - Mobile operating terminal (10 m) - Permanently mounted control cabinet - TAPIO READY - Network connection Ethernet CNC - Manual operation wired for run-in operation - Comfort package operation - woodWOP for machine - woodWOP DXF-Import Basic (single user license) - Record and evaluate machine data - MMR - woodWOP Office Professional (single user license) - Language selection German - Documentation on data carrier - Documentation on paper - INTELLISERVICENET Sale on behalf of the customer, ex location near 73479 Ellwangen, without dismantling, transportation and assembly Disassembly, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: repair required (used), Year of construction: 1995, operating hours: 4,500 h, Functionality: unexamined, 4-shaft shredder WEIMA Type ZM 30 Dceljv Unz Tsintpteg Hopper opening 1000 mm x 1250 mm Motor power 2 x 7.5 kW Damage to one motor. The machine can be repaired upon request.

Condition: new, Robland Z 500 M sliding table saw Sliding carriage 420 x 3200 mm Cutting length 3500 mm Cast iron saw unit Max. saw blade 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90° 175 mm, 45° 120 mm 3 speeds on saw blade 3000/4000/5000 mm Cutting width between saw blade and Z4 parallel stop 1350 mm Cross table 1505 x 760 mm with telescope with miter stop and 2 folding stops Comfort pack on cross table with extendable workpiece roller Dcjliswcxc Aontptsg Frame table with extendable support and degree grid index system with length compensation Protruding saw guard Manual height adjustment and saw blade tilt LED bar for Scoring unit Prepared for grooving cutter (max. 16 mm) Automatic star-delta switch Weight 890-1080 kg Motor 400 V, 7 kW, 9.5 HP Equipped with: Motor 9.2 kW, 3 x 400 V

Condition: excellent (used), Year of construction: 1988, Panel saw Type: Std 6220A/G Dslintpswgbp Hetjcg Year of manufacture: 7.88 Dimensions: 6300 x 2720 x 1235

Condition: used, 0 0,4 - 5,0 mm Workingpiece thickness from to 10 - 50 mm Total length 4000 mm Feed speed 11 m/min. Bimatic edge bander Type Prima 7.5 Two ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 5mm min. Panel width (without rounding unit): 80 mm min. Panel width (with rounding unit): 130 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 50 mm Feed speed: 11 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Dcelintjwgwl Dsptog Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA- interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing knife head. Joining cutterhead. Cross-cut saw unit with suction device incl. 2 pneumatically swivelling saw blades saw blades, adjustable and programmable from the control panel. MULTI radius trimming unit with 4 servomotors, adjustable and programmable from the control panel. programmable from the control panel. Including DIAMANT cutter with radius 1mm and radius 2mm. Rounding unit (copy trimming unit) with insert shelf function and pneumatic 2-position turret, adjustable and programmable from the control panel. The The complete unit can be pneumatically inserted and removed from the control panel. Including 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm MULTI radius scraper unit radius 1mm and radius 2mm with pneumatic 4-position turret. position turret. The unit can also be inserted and removed pneumatically Including suction device with chip collection box for scraper chips. Flat scraper unit with 4-fold usable scraper knives. The complete The complete unit can be inserted and removed pneumatically. Remaining glue is are sucked off. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal wheels for cleaning and buffing. lamellar wheels for cleaning and polishing General equipment: - 90° insertion aid - Telescopic extension with double support - Motorised adjustable infeed ruler (joint thickness adjustment) from the control panel adjustable and programmable - Motorised adjustable top pressure bar adjustable and programmable from the control panel programmable - Motorised adjustable pressure zone adjustable and programmable from the control panel programmable - 5 mm version: Quick-change motors with insert-flush milling cutter interchangeable with milling motors with radius milling cutter - High-gloss package: Roller scanning for radius milling unit, radius scraper unit and flat scraper unit scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue pot - Interior lighting - Control panel with 15'' touchscreen and self-explanatory operator guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tray with quick-change system and energy-saving mode in standby mode in standby - Glue roller with screw conveyor for long and high workpieces (especially for PUR glue) - Additional quick-change glue tray - Pressure zone with 3 pressure rollers, whereby the 1st pressure roller is motorised is motorised - Heavy roller snipping shears for edges 54 x 3 mm - Original RIE...

Condition: used, Engine power: 4.0 PS/HP (3.0 kW), Year of manufacture: 2021, Engine voltage: 3x 400 V, Engine frequency: 50 Hz, Sanding belt length: 2600 mm, Sanding belt width: 150 mm Dolijwhb T Ijntptecg

Condition: used, Year of construction: 2004, total width: 1,800 mm, total height: 2,400 mm, total length: 2,450 mm, briquette diameter: 70 mm, overall weight: 2,000 kg, power: 7.5 kW (10.20 HP), No. 04399 Briquetting press Reinbold RB 160 Used, year of construction 2004 Briquette diameter: 70 mm Capacity (depending on material): 100 - 150 kg/h Motor power: 7.5 kW Chrome-plated tongs Automatic operation with level switch or manual operation Briquette length control Including silo approx. 1400 x 1400 x 900 mm LWH, with agitator and discharge screw Siemens Simatic S7-200 control system Oil cooling for continuous operation and magnetic oil switch Technical documentation available Dcjlinterqhbusptsg Transport dimensions approx. 2450 x 1800 x 2400 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Year of construction: 2015, Condition: ready for operation (used), Additional Equipment Sanding Units: 3 (top sanding) : 1st Sanding Unit: Pneumatically adjustable /2nd Sanding Unit: Pneumatically adjustable, rubber-coated and grooved contact roller / 3rd Sanding Unit: Sanding shoe unit with height-adjustable pneumatic sanding cushion and quick-change sliding cover Belt Drive Motors: 1st Unit: 18500 W, 400 V /2nd Unit: 15000 W, 400 V /3rd Unit: 11000 W, 400 V Workpiece Feed: 2200 W with fabric-reinforced rubber transport belt Belt Tension, Control, and Oscillation: Pneumatic, compressed air consumption approximately 2 l/min This Kundig Brilliant-3 1300mm-RRPd was manufactured in 2015. Ideal for woodworking, it offers robust performance for professional environments. Consider the opportunity to buy this Kundig Brilliant-3 1300mm-RRPd woodworking machine. Contact us for more information. Dolswgp T Tointptjcg Application Types Other Woodworking Machinery

Condition: used, Year of construction: 2003, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Dslinowcgcwotptscg - Year: 2003 - Documentation available: No - CE mark available: Yes - Serial number: 03/1792 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, -User-friendly operating concept Dcolintou T Hrveptog -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: used, Year of construction: 2019, Number of spindles 6 St. Working width 20-230 mm Working height 10-160 mm Feed motor 7 kW Feed speed 5-40 m/min. weight of the machine ca. 3100 kg Weinig Powermat 700 still in use, for inspection including suction unit, pipes and motor for the suction unit ----- Brief summary Manufacturer's description: Working width: 20-230 mm Working height: 10-160 mm Spindle arrangement: Bottom: 2 pieces Right: 1 piece Left: 1 piece Top: 2 pieces Detailed description: ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 125 mm) Working height 10 - 160 mm (with tool flight circle 93 - 125 mm) 1. spindle ----- First lower horizontal spindle Motor 11 KW Diameter 40 mm Speed 6,000 rpm Tool flight circle 125 - 145 mm Tool groove circle rebate cutter 130-160 mm Axial adjustment travel 17 mm Folding device, including rebate cutter MarathonCoating for table insert in front of 1st lower spindle Electronic digital display for radial adjustment 2. spindle ----- First right vertical spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment travel 80 mm Stop lip after the right-hand spindle with quick adjustment Pressure roller from above opposite the right-hand spindle, swivelling away and pneumatic. 3. spindle ----- Delintjwgwlweptjcg First left vertical spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 40 mm below table level 93 - 200 mm Tool flight circle 80 mm below table level 93 - 180 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 80 mm Easily removable suction hose Two lateral pressure rollers in front of the left spindle, travelling and spring-mounted Pressure roller from above opposite the left-hand spindle, swivelling and pneumatic Adjustment travel of the feed rollers opposite the left-hand spindle, axial 35 mm Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom 4. spindle ----- First upper horizontal spindle Motor 11 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 40 mm Split pressure shoe in front of upper spindle with horizontal adjustment plane, Adjustable to tool flight circle and swivelling away from the tool, pneumatic Pressure shoe before and after the upper spindle with electronic digital displays digital displays, integrated in the memory function or the PowerCom Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom 5. spindle ----- Second upper horizontal spindle Motor 7.5 KW Diameter 40 mm Speed 7,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutterheads max. 180 mm Maximum moulding depth 35 mm Axial adjustment travel 40 mm ...

Condition: used, No. 3220 Combined sliding table saw-spindle moulder Felder KF 700 Used, year of construction 2013 Combined sliding table saw and swivel spindle milling machine / spindle moulder Sliding table length 2050 mm Cutting width 800 mm Delivery table 1100 mm X-Roll precision guide system Milling spindle quick-change system Milling fence 230, for milling tools up to 230 mm Milling spindle swivel 90° - 45°, by hand crank Saw blade tilting 90° - 45°, by hand crank Maximum saw blade diameter 315 mm Motor power 5.5 kW Outrigger table 1100 mm, with swiveling and extendable fence up to 2600 mm Pivoting circular saw top guard arm Suction connections: Router 120/80 mm, circular saw 120/50 mm Including 2 saw blades and arc milling hood with accessories Complete technical documentation Transport dimensions approx. 2200 x 1550 x 1800 mm LWH Dslintowhx H Ssptjcg Weight approx. 500 kg Sale on behalf of the customer, ex location near 73430 Aalen, without disassembly, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine extraction systems for air volumes of up to 10,000 m³/h. can be used. Manufactured in accordance with the new EU standard EN 16770 they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 180 mm, Volume flow: 2,610 m³/h, Nominal volume flow: 1,832 m³/h, max. negative pressure: 2,450 Pa, Filter area: 13.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 2 pieces, Motor: 3.0 kW, Dimensions (LxWxH): 2,085 x 900 x 2,130 mm, Weight: 414 kg, Sound pressure level: 76 dB(A), Dust class: M Dcelou T Hrisintptjg incl.: an attached control cabinet

Condition: used, Year of construction: 2020, Number of motors 2 Stück 0 2800 mm Control ja yes WEGOMA Double Miter Saw DS 2750 E1 ----- Sold on customer order from the location, can be viewed in operation! Item 1 Wegoma Double Miter Saw 2750 E1, 2800 mm ----- For wooden glazing beads, muntins, profile strips, aluminum strips, etc. Working length 2800 mm, with pneumatic saw feed via high-precision linear guides, center support, horizontal clamping. Including manual tilting device. Clamping of the tilt and X-axis position via high-performance clamping elements. Head tilting 22.5/90/135 degrees, continuously adjustable, manually. Including EPS 220 positioning control ----- for precise length positioning. With touch panel (dust and splash-proof) display for entering cutting data manually or via data integration. - Ethernet connection 10/100 (TCP/IP) - USB interface - Data transfer possible via USB or network. Includes control cabinet, motor, and software licenses. - Automatic cutting (can only be activated via software in conjunction with access protection) 2 carbide saw blades Item 2: Combined workpiece clamping Djlswgwlqeintptscg ----- from the front and from above. Instead of horizontal clamping. (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, -Large planing tables made of gray cast iron -The planing table is adjusted using a precise parallelogram system, ensuring that the distance between the table tips and the cutter block remains constant in every adjustment position. -The large, sturdy planing stop made of anodized aluminum is easily movable and can be tilted from 0° to 45°. -The angle of the stop can be read from the workstation. -Comes with auxiliary stop as standard. -Large four-knife block with precision bearings. -Smooth operation thanks to the precision unit and the heavy-duty cast iron construction. -Powerful industrial motor. -Maximum user safety with simple operation. -Scale display for chip removal. -Manual table adjustment. -Motor protection switch. Equipment details. -Incl. Foldable auxiliary stop for narrow workpieces -Manual quick adjustment of the chip removal with scale & clamping head Dcelou T Hrceintptsg The guard -The guard is foldable and designed to not hinder the operator while working, while simultaneously protecting them. TERSA models with Tersa planer knife shaft system -No more adjustments or screwing -Planer knife changes in seconds -Self-locking -Extremely quiet -Perfect planing results Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2750 mm - Width/depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Planer: - Total length of tables: 2720 mm - Work table length: 1498 mm - Maximum chip removal for planer: 8 mm - Planer stop length: 1200 mm - Planer stop height: 190 mm - Planer stop swivel range: 90 – 45° Extraction connection: - Extractor nozzle diameter (thickness): 120 mm Installation information: - Space required (length): 2750 mm - Space required (width/depth): 1604 mm - Explanation Space requirements: The dimensions take into account maximum travel distances or usable lengths. Electrical specifications: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 5000 rpm - Maximum planing width: 520 mm

Condition: used, -Sturdy steel and gray cast iron construction -Large, ribbed gray cast iron planing tables -Smooth operation due to high weight -Four feed speeds -Motorized thicknessing table lift with two speeds and digital display -Articulated pressure bar in the infeed -Precision-mounted four-knife shaft -Helical-toothed steel feed roller for particularly even and gentle wood feed -Rubber-coated feed roller -Large planing stop, tiltable from 90 to +45° -Standard auxiliary stop -Powerful industrial motor -Pneumatic quick-change system with pneumatic raising and lowering of the planing table -The extraction connection position is always in the same place for both planing and thicknessing, eliminating the need for an additional extraction hose or the need for cumbersome reconnection and repositioning around the machine required Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2300 mm - Width/depth (product) approx.: 1100 mm - Weight (net) approx.: 980 kg Planer: - Total length of tables: 2300 mm - Work table length: 1200 mm - Planer table width: 520 mm - Working height: 930 mm - Max. chip removal for planer: 6 mm - Planer stop length: 1200 mm - Planer stop height: 190 mm - Planer stop swivel range: 90 – 45 ° Extraction connection: - Extractor nozzle diameter (thickness): 120 mm Installation information: - Space required (length): 2300 mm - Space requirement width/depth: 1610 mm - Explanation of space requirement: The dimensions take into account the maximum travel distances or usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness: - Thickness table width: 520 mm - Minimum working height (thickness): 3.5 mm - Maximum working height (thickness): 250 mm - Maximum chip removal (thickness): 8 mm Electrical data: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 5000 rpm - Maximum planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min Dslinju T Hq Sjtptecg

Condition: used, -Motorized thicknessing table lift with two speeds -Numerical display for working height -Gray cast iron thicknessing table -The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision -Four feed speeds -Optional with two rollers in the thicknessing table -Standard with noise protection and chip protection curtains at the workpiece inlet and outlet -Adjustable roller contact pressure -Front feed roller with helical gearing -Rubber-coated feed roller -Powerful industrial motor Dslinou T Hq Ejtptocg Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Extraction connection: - Extraction nozzle diameter, thickness: 150 mm Installation information: - Space required length: 1305 mm - Space required width/depth: 1080 mm - Space required height: 1197 mm - Explanation of space requirements: The dimensions take into account the maximum travel distances or usable lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm - Working area width/depth: 2000 mm - Explanation of the working area: Please add the specified dimensions to the space required to determine the recommended free installation area for the machine. Thickness: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Minimum working height (thickness): 3.5 mm - Maximum working height (thickness): 300 mm - Minimum working length (thickness): 210 mm - Maximum chip removal (thickness): 8 mm Electrical data: - Drive motor power: 9 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 4500 rpm - Maximum planing width: 630 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: used, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine machines for air volumes of up to 10,000 m³/h can be used. Manufactured according to the new EU standard EN 16770, they are particularly suitable for wood processing operations in which special safety requirements Dcelju T Dv Eointptjg due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 200 mm, Volume flow: 2,495 m³/h, Nominal volume flow: 2,262 m³/h, max. negative pressure: 2,000 Pa, Filter area: 14.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 3 pieces, Motor: 4.0 kW, Dimensions (LxWxH): 2,645 x 900 x 2,130 mm, Weight: 500 kg, Sound pressure level: 73 dB(A), Dust class: M incl.: an attached control cabinet

Condition: used, -Sturdy steel and gray cast iron construction -Dynamically balanced milling unit anchored to the work table -Extremely robust construction -Smooth operation thanks to precision units and high dead weight -Comes with right-hand/left-hand rotation and electronic locking when changing direction as standard -Five speeds from 3000 - 10000 rpm -Speed changes are easily and conveniently performed from the machine side -Comes with an MK 4 interchangeable spindle system as standard -Large gray cast iron work table for lasting precision -Easy handling thanks to controls and a speed display on the front of the machine -Large milling stop with fine adjustment and aluminum stop jaws as standard -Stop adjustment via crank handle -Numerical display of the set spindle height, accurate to within a tenth -Powerful industrial motors Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Weight (net) approx.: 510 kg Extraction connection: - Number of extraction nozzles: 2 - Extraction nozzle diameter: 80 mm - Number of extraction nozzle stops: 1 - Extraction nozzle stop diameter: 120 mm Work table: - Work table length: 2500 mm - Work table width: 810 mm Dcolintou T Hhkoptog - Table height: 923 mm Installation information: - Explanation of space requirements: The dimensions take into account the maximum travel distances or usable lengths. - Working area length: 3700 mm - Working area width/depth: 5000 mm - Explanation of working area: Please add the specified dimensions to the space required to determine the recommended free space for the machine. Features: - Router stop: Heavy-duty professional design with aluminum stop jaws and fine adjustment, adjustable from the front via a crank with a numeric digital display - Curved router guard - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Controls: manual height and tilt adjustment of the router unit - Position of control elements: on the machine body - Table design: table extension left and right and extendable workpiece support (total width 2500 mm) Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Router spindle: - Spindle tilt: -45 – +45 ° - Usable spindle length: 140 / 180 mm - Explanation of usable spindle length: for spindle diameter 30 – 35 / for spindle diameter 40 – 50 mm - Milling spindle stroke: 90 mm - Changeable spindle: MT 4 - Spindle speed(s): 3000/4500/6000/8000/10000 rpm Maximum milling tool diameter: - Maximum lowerable tool diameter: 320 x 60 mm - Maximum tool diameter for profile milling: 250 mm - Maximum tool diameter for tenon milling: 350 mm - Maximum tool diameter for form milling: 160 mm