Condition: used, Year of construction: 2012, Hot air heater used Year of construction 2012 with forced-air heating oil burner (tested according to DIN 4794) suspended version Nominal heat output: max. 120 kW Hot air output 9200 m³/h Fuel type: heating oil Operating mode: cycling essentially consisting of: Sheet steel housing, double-walled, with insulation, galvanized, combustion chamber made of heat-resistant special steel with heat exchanger, radial fan with three-phase motor output 2.2 kW, forced-air heating oil burner Double-walled insulated stainless steel chimney with cleaning opening Control cabinet with selector switches with digital controller with timer approx. 20 m additional duct with vertically and horizontally adjustable ventilation grilles incl. Volume flow control 4 heat recovery ventilators with differential temperature control (infinitely adjustable) Availability: short term Crebeugx Trs Ebnr Ueb Storage location: Hagen, NRW

Condition: excellent (used), Year of construction: 2020, Edge bander Creb Eov A U Upobnr Uob Manufacturer: Felder Type: G360-4 Year of manufacture: 2020 Operating hours: approx. 439 h Edge thickness: 0.4 -3 mm Workpiece thickness: 10 - 45 mm Feed: 8 m/min Total output: 5.5 kW Total length: approx. 3,200 mm Joining unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Surface scraper: Yes

Condition: new, Year of construction: 2022, New machine Cjb Ebnrskwhlto Uerb Year of manufacture 2022 The upper part in heavy cast iron construction with built-in three-phase motor 380 V, 2,2kW, 2850 rpm; the machine is equipped with built-in switch-plug combination; motor protection switch and main switch according to VDE; dimensions of the sanding belt back: 850 x 150 mm; steel table adjustable in height by means of adjustable by spring pressure; belt dimension: 150 x 2280 mm; the rear back wall of the sanding belt is covered with a graphite glide coating; the machine is machine is supplied with an assortment of sanding belts; additionally included in the delivery is an angle and miter fence. The machine is equipped with a central central exhaust system with an air velocity of min. 20 m/s dust-tested (GS) Holz-BG-Stuttgart. Standard equipment: - swiveling 90-180 - motorized belt oscillation - small support table at the deflection roller - pneumatic belt tensioning Technical data: motor power: 2,2 kW grinding belt size: 150 x 2280 mm grinding belt speed: 22 m/sec table size: 750 x 350 mm space requirement: 1000 x 800 mm weight: from 180 kg suction Ø: 100 & 80 mm Availability: short term Storage location: Solingen

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Equipment and technical data: Basic machine 1057 XL C with Beckhoff touch screen control. Extendable workpiece support 600 mm Infeed ruler long 1252 mm Joining milling unit 2 motors Cob Ebnenvkgker Uorb DIA jointing cutter 70 x 64x 30 mm Z2+2 link. and clockwise rotation edge feeding 1903 fully automatic Glujet 301 glue application system Automatic reloading function Storage shaft for 1.4 kg cartridges ( 4 cartridges) GluJet collecting tray Printing unit 1912-3 pneumatic Spraying device GM 201 after printing unit Kappagregat 1918 pneumatic Suction hoods for Kappagregat Combination milling unit FR201 with DIA cutters R=2 mm Form milling unit 1832 Shelf program Radius scraper ZK 301 Chip catcher box Surface scraper FK 701 Spraying unit front and rear TR201 Buffing unit 1940 Location: Solingen Availability: short term

Condition: used, Year of construction: 1981, Used machine Year of construction: 1981 Universal dowel drilling machine with a swiveling drilling unit with fully automatic control with 2 safety air clamps Drilling gear motor 2.2 kW with 21 spindles Spindle pitch 32 mm Csbekwg T He Ebnr Uerb with attached oil damping Height adjustment 80 mm Drilling depth 80 mm with chassis Weight 420 kg Availability: short term Location: Solingen

Condition: new, Year of construction: 2021, New machine Year of manufacture 2021 Dimensions and weights Length ca.1725 mm width/depth ca.880 mm Weight ca.270 kg Dressing Chip removal max.4 mm Connection suction Cob Ebnjkwhdlor Usrb Suction port diameter thickness2 x 120 mm Thickness Working height min.3 mm Working height max.230 mm Chip removal max.4 mm Electrical data Power drive motor4 kW Supply voltage400 V Mains frequency50 Hz Planing cutterhead TypeTERSA Number of planing knives3 pcs Speed5200 min¯¹ Planing width max.300 mm Feed rate Speed7 m/min Availability: short term Storage location. Hochheim

Condition: used, Used chain cutter Cebeuf Hxas Ebnr Uerb older model stationary version Availability: short term Storage location: NRW

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 DESCRIPTION21 drilling spindles with quick-action clamping system, five quick-action chucks included in delivery Ceb Ebnrokwhlds Uorb Solid steel work table, five quick-action chucks included Patented system for quick and easy adjustment of drilling depth via spiral disk Pneumatic drill head swivel, for drilling in any position between 0° and 90 Foldable side stops made of cast iron with round bar guide Side stops can be easily adjusted by means of a magnifying glass on the millimeter scale Height adjustment of the drilling head via counter Two positionable pneumatic clamping cylinders Thanks to 640 mm center distance, machining of 2 workpieces with a width of 316 mm each is also possible SUPPLYTwo pneumatic pressure cylinders Five quick-action chucks Two stop rulers, each 1.5 m long Four folding stops for the fence rulers One setting gauge for fine adjustment of the folding stops on the fence rulers TECHNICAL DATA Dimensions and weights Working table length 885mm Working table width e332mm length (product) ca.1015mm width/depth (product) ca.990mm Height (product) ca.1270mm Weight (net) ca.260kg Electrical data Input power1,5kW Output power1,1kW Rated operation mode drive motorS3 Supply voltage400V Mains frequency50Hz Noise emission Sound pressure level78,3dB(A) Pneumatic connection Working pressure6 8bar Spindle Max. Drilling width 640mm Max. drilling depth at 90°65mm Number of spindles21 Spindle distance32mm Spindle distance first to last640mm Spindle distance sufficient forTwo workpieces each 316mm wide Spindle speed(s)2800min?¹ Swivel of drilling unit0 90°. Max. workpiece height130mm Suction Suction nozzle diameter 80mm Incl. special accessories: 2 pcs. Additional pneumatic pressure cylinder for MDB 21/23/29 PRO 17 pcs. quick-action chuck for MDB 21/23/29 PRO 1 pc. Setting gauge for backgauge distance for MDB 21/23/29 PRO 1 pc. Reference bolt for row bore for MDB 21/23/29 PRO Location: Solingen Availability: Immediately

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Length approx.: 2300 mm Width/depth approx.: 1100 mm Weight approx.: 980 kg Total length of the tables: 2300 mm Feed table length: 1200 mm Ceb Ebsrq N Eaonr Usrb Working height: 930 mm Max. chip removal: 6 mm Fence length: 1200 mm Fence height: 190 mm Swivel range of dressing fence: 90 - 45 ° Suction nozzle diameter thickness: 120 mm Main motor: 7 kW Space requirement length: 2300 mm Space requirement width/depth: 1610 mm Explanation of space requirement: The dimensions take into account maximum travel distances or effective lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Max. working height: 250 mm Max. chip removal: 8 mm Supply voltage: 400 V Phase(s): 3 Ph Type of current: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planing knives: 4 pcs Speed: 5000 min¯¹ Planing width max.: 520 mm Speed: 5/8/12/18 m/min Availability: short term Storage location: Solingen

Condition: used, Used machineCondition: age-appropriateTable size 2600 x 900 mmSanding length max. usable 2500 mmBelt length 7100 mm x 150 mm1100 mm offset rightAvailability: short termLocation: Solingen Csb Ebjkwg Spsnr Uorb

Condition: new, New device THE ADVANTAGES Quality from the region From conviction 5 years warranty 360° rotatable 360° adjustable support arms Galvanized support arms - simply clean with thinner Height adjustable TECHNICAL DATA Load capacity: 100kg Rotatable:360 Adjustable support arms:4 Höhenverstellbar:950-1250mm Max. Length:700-1260mm Max. Width: 600-1120mm Max. Diagonal: 900-1680mm Ceb Esnvkgyebnr Ujrb Availability: Immediately Storage location: Hochheim

Condition: used, Year of construction: 1985, Used machine Year of construction: 1985 Condition: according to age Equipment and technical data: Table size 2800 x 1250 mm max. usable sanding length between the machine stands 2600 mm Sanding width with one transverse table movement 1000 mm Passage under belt, table height adjustment electric 340 mm Motor 5.5 kW Reversing switch for left and right belt rotation Belt speed 22 m/sec Weight 900 kg Availability: short term Location: Solingen Cob Ebnreq Hh D Ns Ujrb

Condition: new, Year of construction: 2022, New machine, year of manufacture 2022 For large cutting lengths e.g. in kitchen construction or for floorboards Small footprint and versatile Quick changeover between double miter cuts or cutting to length Robust swivel arm made of cast iron with exchangeable hexagonal guides Movable saw unit with return spring, eightfold bearing for precise cuts Saw unit can be swiveled 45 degrees on both sides Motor with mechanical brake Aluminium fence as standard Roller conveyors with one meter length for both sides available as accessories Ceb Eokwhm Rebnr Uerb Technical data x Dimensions and weights length approx. 2110 mm width/depth approx. 1580 mm Height approx. 1500 mm Weight (net) approx. 300 kg Connection suction: Suction nozzle-Ø saw blade guard 60 mm Electrical data: Supply voltage 400 V Mains frequency 50 Hz Power drive motor 4 kW Sliding carriage and table: Table length 2060 mm Table width 1320 mm Noise emission Sound pressure level 84 dB(A) Sound power level 100 dB(A) Circular saw unit saw blade tilt -45° 45° Swivel angle saw arm -45° 45° Max. Cutting height 45° 570 x 120 mm Max. Cutting height -45° 470 x 120 mm Max. Cross section 900 x 20 / 855 x 80 mm Max. Cutting height 0°/45° 120 / 83 mm Diameter saw blade 400 mm Diameter saw blade bore 30 mm Speed saw blade 2800 min¯¹ Location: Solingen Availability: n. Absprache

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Crob Ebnot Hagnor Usb Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: used, Used machine Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm stroke max 80 mm Motor 1,5 HP Crjb Ebnrjuf Hw No Uob Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control NRW

Condition: used, Used machine table length approx. 2400 mm Crjb Ebnrjkwhp Ne Usb Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2018, Used machine Csb Ebonbiplsnr Uerb

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Motor power: 0,8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch Cjb Ebekwhffjnr Uorb press-in die missing!!! Availability: by arrangement Location: Solingen

Condition: new, Year of construction: 2024, New dust extractor Year of construction 2024 Technical data: Certified according to BGHM H3* / CE / GS Power consumption 2.2 kW Current consumption IE2 4.4 A Filter area 9.5 m² Csb Eeruuh Debnr Uerb Dimensions 1575 x 910 x 2110 Dust garbage can volume 1 x 160 l Weight 405 kg Intake connection 160 mm, right Operating volume flow: 2300 m³/h Volume flow max/nom. 1780/1447 Negative pressure at nominal volume flow 2450 PA Negative pressure in front of the fan at VNenn 3160 PA Maximum sound pressure level 74 dB(A) Filter regeneration pneumatic max. 7.5 bar Operating mode: Continuous operation Compressed air connection must be available Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2019, Used raw air extraction unit Year of construction 2019 Nominal capacity 2789 m³/h Filter area 1.8 m² max. negative pressure 1668 pa Chip collection volume 160 l Csb Ebnrstr Hfpe Ujrb Motor 1.1 kW 400 V Extraction nozzle 1 x 120 mm, 1 x 100 mm Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2020, Exhibition machine Year of manufacture: 2020 Equipment and technical data: including suction nozzle d= 250 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW, 400 V / 50 Hz, on / off switch, a potential-free contact for machine monitoring and automatic start / stop function, motor protection switch, volume flow monitoring / pressure difference display, 3 mobile dust bins with inserted chip bag and clamp, solid filter module made of galvanized sheet steel. Technical data: · Maximum volume flow: 5,040 m³/h · Nominal volume flow: 3,532 m³/h · Associated negative pressure: 2,500 Pa · Suction-side connection: d = 250 mm · Operating mode: continuous operation · Current type: three-phase current · Power consumption: 5.5 kW / 11.5 A · Filter area: 25.2 m² · Filter regeneration: automatic, pneumatic · Chip collection volume (total): 480 liters · Chip bags (PE): 600 x 600 x 1100 mm · Weight: approx. 1100 kg · Noise level according to EN 23744: 72 dB (A) · L x W x H: 3,350 x 1,020 x 2,290 mm Required connections: Crsb Ebnevuctdor Usb · Standard compressed air coupling NW 7 approx. 6 bar, compressed air serviced and cleaned · 1 x 32 A CEE socket Location: Solingen Availability: by arrangement

Condition: new, Year of construction: 2022, Exhibition machine Year of construction 2022 Equipment and technical data: Outlet on the right with pneumatic shaking off with powder extinguishing Description : Cobet Sz Nbo Ebnr Ujrb Dust extractor type NE 300 with powder quenching with BGHM approval certificate, including suction nozzle, 5 m cable with plug and reversing switch, electric motor 400V/50Hz, on/off switch, lockable motor protection switch; with compressed air tank and compressed air pulse cleaning or pneumatic / motorized shaking, pressure difference indicator, mobile dust garbage cans with clamping bracket and chip collection bag Power consumption: 7.5 kW Power consumption: 13.5 A Filter area: 31.60 m2 Dimensions: 3440 x 1120 x 2420 Dust garbage can volume: 3 x 160 l Weight: 1210 kg Suction nozzle: 300 mm Maximum/ nominal volume flow: 6000/5085 m3/h Negative pressure at nominal volume flow: 2400 PA Negative pressure in front of the fan at Vnenn: 2950 PA Maximum sound pressure level: 74 dB Operating mode: Continuous operation Necessary connections: - Compressed air standard coupling NW 7 approx. 6 bar, compressed air maintained and cleaned - 1 x 32 A CEE socket With this system, uniform filling of the garbage cans cannot be guaranteed in every operating situation due to different extraction volumes and differing chip/dust contents. Availability: short term Location: Solingen

Condition: new, Year of construction: 2023, New machine Year of construction: 2023 NESTRO® dust extractor, a new generation, more powerful, more compact, more economical and with some highlights that will inspire you. Including a new type of extinguishing device with drop flap and oxygen extraction, 5 m cable and CEE plug with reversible pole, IE3 fan drive, H-O-A selector switch and integrated emergency stop function. The NE-J ECO is of course H3-tested. The newly designed model fits into any standard sea container. The suction nozzle with blow-in box and non-return flap is located in the middle of the front of the dust extractor. The highly efficient JET filter regeneration guarantees long filter service life, low filter resistance and therefore high extraction performance. The dust garbage cans are each equipped with 4 swivel castors, a viewing window for checking the fill level and a sturdy chip collection bag. Technical data: Volume flow max./nom.: 8,000 / 6,925 m³/h Vacuum v.v./nom.: 3,400 / 2,750 Pa Csb Ebneruuidor Uerb Suction side connection: Ø 350 mm Operating mode: Continuous operation Type of current: Three-phase current Power consumption: 11 kW /21 A / 50 Hz Filter area: 38 m² Filter regeneration: JET / automatic Compressed air consumption per cycle: 560 Nltr. Chip disposal: Chip garbage can with PE bag Weight: approx. 1,250 kg Noise value according to EN 11201: 72-74 dB(A) according to MRI (+/- 4dB) Length x width x height: 1,060 x 3,981 x 2,174 mm Necessary connections: Compressed air standard coupling NW 7.2; 6 bar, compressed air dry and oil-free 1 x 32 A CEE connection socket Location: Solingen Availability: short term

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require Crob Ebnrsmrxznj Ueb lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: used, Used machine Condition: age-appropriate Cjb Ejv Aqx Dobnr Ujrb Technical data: Table size 2600 x 900 mm Max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right Availability: short term Location: Solingen