Condition: used, knife: Centrolock reversible blade Z2 flight circle (ø): 93 mm Crebjwffm Hjvl Ef Esb admission: PowerLock HSK length: 240 mm material: steel

Condition: like new (used), Functionality: fully functional, planing height: 130 mm, planing width: 230 mm, rotational speed (max.): 6,000 rpm, planer shaft diameter: 125 mm, motor voltage: 380 V, compressed air connection: 7 bar, type of input current: three-phase, table length: 2,500 mm, shaft diameter: 40 mm, number of spindles: 5, frequency: 50 Hz, FOUR-SIDED PLANER UNIMAT 500 Cjbowchbzovl Ef Esrb PERFECT CONDITION, FEW HOURS 5 AXES / 3 AXES CONTROLLED Available from May/June (still in demo)

Condition: new, Year of construction: 2025, Functionality: fully functional, cutting length (max.): 5,000 mm, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, type of input current: three-phase, Equipment: lighting, motor brake, rotational speed infinitely variable, scorer, You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations. Basic Equipment Electrically driven height and tilt adjustment 0-46° with automatic cutting height correction when tilting Controls at eye level, tiltable Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm, larger available upon request. Angle stop with fixed 90° position, Cobvl Eewf Hdgof Eorb manually adjustable via scale up to 3,200 mm Maximum sawblade projection: 150 mm Maximum sawblade diameter: 450 mm Drive power: 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2,000 - 6,000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). 2-axis scoring unit, single-axis tilting With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off Switch on the Sliding Table The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety. Angle and miter stop, cutting to lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale. Ask us about your dream machine and we will be happy to advise you. We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

Condition: reconditioned (used), Year of construction: 1998, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers Crsbvslatv Aol Ef Esb - Extrusion press 12 ton - crosscut - Packaging width 500 mm - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Condition: good (used), Year of construction: 1984, Used Killinger wood lathe Model KM 2000 S Year 1984 with KM-300 copying device Center distance 1050 mm Center height 220 mm Spindle mount M 33 Tailstock with MT2 taper quill Tool rest 300 mm 4 speeds: 530-1100-1700-2600 rpm Motor 400V/0.75 kW Length 174 cm Width 50 cm Height 115 cm Weight approx. 110 kg Crobvljwd Nlds Ef Eob

Condition: used, Year of construction: 2015, Cutting length: 3.800 mm Width of lifting table: 2.200 mm Number of grippers: 9 Feedrate max: 140 m/min Cebvl Efjwgl Iyo Ejrb Continuously variable feed: Yes Saw blade projection: 95 mm Main motor power: 15 kW Scoring saw: Motoric adjustment SELCO DigiSet: Yes Labelling: manually Lift table: Yes For sensible workpieces: Clamping pressure adjustable Stop side: Left Optimization: Yes SELCO OPTIPLANNING PROFESSIONAL: Yes SELCO Quick Change: Yes Head aligner: Yes Side alignment: Yes Control: BIESSE OSI PLUS

Condition: used, knife: WP Z4 V4 flight circle (ø): 160 mm drilling: 40 mm Cjbvlewffk Es Ef Ejrb length: 8-15 mm material: steel Labelling: BG test

Condition: like new (used), Year of construction: 2014, Functionality: fully functional, saw blade diameter: 500 mm, positioning accuracy: 0.1 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, compressed air connection: 7 bar, AUTOMATIC CUT-OFF SAW SALVADOR FEW HOURS LENGTH UP TO 6200MM INCLUDING ERROR MARKING REMOVAL Crobowchadsvl Ef Ejb OPTIMIZING 2 SCREENS / LABEL PRINTER FULL OPTION BUILT IN 2014 Available May/June 2025

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 The upper part in heavy cast iron construction with built-in three-phase motor 380 V, 2,2kW, 2850 rpm; the machine is equipped with built-in switch-plug combination; motor protection switch and main switch according to VDE; dimensions of the sanding belt back: 850 x 150 mm; steel table adjustable in height by means of adjustable by spring pressure; belt dimension: 150 x 2280 mm; the rear back wall of the sanding belt is covered with a graphite glide coating; the machine is machine is supplied with an assortment of sanding belts; additionally included in the delivery is an angle and miter fence. The machine is equipped with a central central exhaust system with an air velocity of min. 20 m/s dust-tested (GS) Holz-BG-Stuttgart. Standard equipment: Crjbekwhltsvl Ef Eob - swiveling 90-180 - motorized belt oscillation - small support table at the deflection roller - pneumatic belt tensioning Technical data: motor power: 2,2 kW grinding belt size: 150 x 2280 mm grinding belt speed: 22 m/sec table size: 750 x 350 mm space requirement: 1000 x 800 mm weight: from 180 kg suction Ø: 100 & 80 mm Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2006, Working dimension X: 3.225 mm Working dimension Y: 1.550 mm Working dimension Z: 200 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 11 kW Rotation speed max: 18.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 17 Cobvljwgl Imj Ef Esrb Vertical drilling spindles: 23 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Groove saw: 90° turnable Edgebanding aggregate: Unit, changeable HOMAG Edgebanding aggregate EASYEDGE: Yes Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Safety device: Safety mat Enclosed drag chain: Yes Control: HOMAG POWER CONTROL PC 85 Software: HOMAG WOODWOP 5.0 Conformity marking: CE mark

Condition: used, knife: Centrolock reversible blade Z2 Csbvl Ejwffklof Esrb flight circle (ø): 93 mm admission: PowerLock HSK length: 100 mm material: steel

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, overall weight: 2,000 kg, workpiece height (max.): 3,350 mm, LOCKING BENCH FOR FRAMES 6 horizontal and vertical snap fasteners top snap fasteners motor-driven (7 pcs) Length 6000 mm x height 3350 mm Crsbvlswcg T No Ef Esb Total length 7m 2000 kg

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Equipment and technical data: Basic machine 1057 XL C with Beckhoff touch screen control. Crobvl Eonvkgksf Eeb Extendable workpiece support 600 mm Infeed ruler long 1252 mm Joining milling unit 2 motors DIA jointing cutter 70 x 64x 30 mm Z2+2 link. and clockwise rotation edge feeding 1903 fully automatic Glujet 301 glue application system Automatic reloading function Storage shaft for 1.4 kg cartridges ( 4 cartridges) GluJet collecting tray Printing unit 1912-3 pneumatic Spraying device GM 201 after printing unit Kappagregat 1918 pneumatic Suction hoods for Kappagregat Combination milling unit FR201 with DIA cutters R=2 mm Form milling unit 1832 Shelf program Radius scraper ZK 301 Chip catcher box Surface scraper FK 701 Spraying unit front and rear TR201 Buffing unit 1940 Location: Solingen Availability: short term

Condition: like new (used), Year of construction: 2018, operating hours: 650 h, Functionality: fully functional, input voltage: 380 V, overall weight: 1,400 kg, workpiece height (max.): 1,220 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 750 mm, BONACIN KORPUSPERS Year of construction 2018 Weight 1400 Kg Cycle. 650 (Perfect new condition) Csbvl Efswcg Iys Ejrb New price 47,000 eur Demo possible Max. dimensions Length. 2500mm Depth 650mm Height 1220mm Fully automatic program, everything adjustable manual operation

Condition: used, Year of construction: 2012, Hot air heater used Year of construction 2012 with forced-air heating oil burner (tested according to DIN 4794) suspended version Nominal heat output: max. 120 kW Crjbeugx Trevl Ef Esb Hot air output 9200 m³/h Fuel type: heating oil Operating mode: cycling essentially consisting of: Sheet steel housing, double-walled, with insulation, galvanized, combustion chamber made of heat-resistant special steel with heat exchanger, radial fan with three-phase motor output 2.2 kW, forced-air heating oil burner Double-walled insulated stainless steel chimney with cleaning opening Control cabinet with selector switches with digital controller with timer approx. 20 m additional duct with vertically and horizontally adjustable ventilation grilles incl. Volume flow control 4 heat recovery ventilators with differential temperature control (infinitely adjustable) Availability: short term Storage location: Hagen, NRW

Condition: used, Used chain cutter older model stationary version Availability: short term Cebvl Eeuf Hxajf Eerb Storage location: NRW

Condition: used, Year of construction: 1981, Used machine Year of construction: 1981 Universal dowel drilling machine with a swiveling drilling unit with fully automatic control with 2 safety air clamps Drilling gear motor 2.2 kW with 21 spindles Spindle pitch 32 mm Csbvjkwg T Hjl Ef Eorb with attached oil damping Height adjustment 80 mm Drilling depth 80 mm with chassis Weight 420 kg Availability: short term Location: Solingen

Condition: new, Year of construction: 2021, New machine Year of manufacture 2021 Dimensions and weights Length ca.1725 mm Csbokwhdljvl Ef Ejrb width/depth ca.880 mm Weight ca.270 kg Dressing Chip removal max.4 mm Connection suction Suction port diameter thickness2 x 120 mm Thickness Working height min.3 mm Working height max.230 mm Chip removal max.4 mm Electrical data Power drive motor4 kW Supply voltage400 V Mains frequency50 Hz Planing cutterhead TypeTERSA Number of planing knives3 pcs Speed5200 min¯¹ Planing width max.300 mm Feed rate Speed7 m/min Availability: short term Storage location. Hochheim

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 DESCRIPTION21 drilling spindles with quick-action clamping system, five quick-action chucks included in delivery Solid steel work table, five quick-action chucks included Patented system for quick and easy adjustment of drilling depth via spiral disk Pneumatic drill head swivel, for drilling in any position between 0° and 90 Foldable side stops made of cast iron with round bar guide Side stops can be easily adjusted by means of a magnifying glass on the millimeter scale Height adjustment of the drilling head via counter Two positionable pneumatic clamping cylinders Thanks to 640 mm center distance, machining of 2 workpieces with a width of 316 mm each is also possible SUPPLYTwo pneumatic pressure cylinders Five quick-action chucks Two stop rulers, each 1.5 m long Four folding stops for the fence rulers One setting gauge for fine adjustment of the folding stops on the fence rulers TECHNICAL DATA Dimensions and weights Working table length 885mm Working table width e332mm length (product) ca.1015mm width/depth (product) ca.990mm Height (product) ca.1270mm Weight (net) ca.260kg Electrical data Input power1,5kW Output power1,1kW Rated operation mode drive motorS3 Supply voltage400V Mains frequency50Hz Cjbvlokwhlds Ef Esrb Noise emission Sound pressure level78,3dB(A) Pneumatic connection Working pressure6 8bar Spindle Max. Drilling width 640mm Max. drilling depth at 90°65mm Number of spindles21 Spindle distance32mm Spindle distance first to last640mm Spindle distance sufficient forTwo workpieces each 316mm wide Spindle speed(s)2800min?¹ Swivel of drilling unit0 90°. Max. workpiece height130mm Suction Suction nozzle diameter 80mm Incl. special accessories: 2 pcs. Additional pneumatic pressure cylinder for MDB 21/23/29 PRO 17 pcs. quick-action chuck for MDB 21/23/29 PRO 1 pc. Setting gauge for backgauge distance for MDB 21/23/29 PRO 1 pc. Reference bolt for row bore for MDB 21/23/29 PRO Location: Solingen Availability: Immediately

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Length approx.: 2300 mm Width/depth approx.: 1100 mm Weight approx.: 980 kg Total length of the tables: 2300 mm Feed table length: 1200 mm Working height: 930 mm Max. chip removal: 6 mm Fence length: 1200 mm Fence height: 190 mm Swivel range of dressing fence: 90 - 45 ° Suction nozzle diameter thickness: 120 mm Main motor: 7 kW Space requirement length: 2300 mm Space requirement width/depth: 1610 mm Explanation of space requirement: The dimensions take into account maximum travel distances or effective lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Cebverq N Eaol Ef Ejrb Minimum working height: 3.5 mm Max. working height: 250 mm Max. chip removal: 8 mm Supply voltage: 400 V Phase(s): 3 Ph Type of current: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planing knives: 4 pcs Speed: 5000 min¯¹ Planing width max.: 520 mm Speed: 5/8/12/18 m/min Availability: short term Storage location: Solingen

Condition: used, Used machineCondition: age-appropriateTable size 2600 x 900 mmSanding length max. usable 2500 mmBelt length 7100 mm x 150 mm1100 mm offset rightAvailability: short termLocation: Solingen Cobvskwg Spjl Ef Eerb

Condition: new, New device THE ADVANTAGES Quality from the region From conviction 5 years warranty 360° rotatable 360° adjustable support arms Galvanized support arms - simply clean with thinner Height adjustable TECHNICAL DATA Load capacity: 100kg Rotatable:360 Adjustable support arms:4 Höhenverstellbar:950-1250mm Max. Length:700-1260mm Max. Width: Cobvl Efonvkgys Eerb 600-1120mm Max. Diagonal: 900-1680mm Availability: Immediately Storage location: Hochheim

Condition: used, Year of construction: 1985, Used machine Year of construction: 1985 Condition: according to age Csbvl Eeq Hh D Nef Eorb Equipment and technical data: Table size 2800 x 1250 mm max. usable sanding length between the machine stands 2600 mm Sanding width with one transverse table movement 1000 mm Passage under belt, table height adjustment electric 340 mm Motor 5.5 kW Reversing switch for left and right belt rotation Belt speed 22 m/sec Weight 900 kg Availability: short term Location: Solingen

Condition: new, Year of construction: 2022, New machine, year of manufacture 2022 For large cutting lengths e.g. in kitchen construction or for floorboards Small footprint and versatile Quick changeover between double miter cuts or cutting to length Robust swivel arm made of cast iron with exchangeable hexagonal guides Movable saw unit with return spring, eightfold bearing for precise cuts Saw unit can be swiveled 45 degrees on both sides Motor with mechanical brake Aluminium fence as standard Roller conveyors with one meter length for both sides available as accessories Technical data x Dimensions and weights length approx. 2110 mm width/depth approx. 1580 mm Height approx. 1500 mm Crebvlekwhm Rj Ef Eob Weight (net) approx. 300 kg Connection suction: Suction nozzle-Ø saw blade guard 60 mm Electrical data: Supply voltage 400 V Mains frequency 50 Hz Power drive motor 4 kW Sliding carriage and table: Table length 2060 mm Table width 1320 mm Noise emission Sound pressure level 84 dB(A) Sound power level 100 dB(A) Circular saw unit saw blade tilt -45° 45° Swivel angle saw arm -45° 45° Max. Cutting height 45° 570 x 120 mm Max. Cutting height -45° 470 x 120 mm Max. Cross section 900 x 20 / 855 x 80 mm Max. Cutting height 0°/45° 120 / 83 mm Diameter saw blade 400 mm Diameter saw blade bore 30 mm Speed saw blade 2800 min¯¹ Location: Solingen Availability: n. Absprache

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Crjbot Hagnovl Ef Esb Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen