Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz Crsbst Hagnevl Ef Eob including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2011, Cutting length: 3.800 mm Pusher stroke: 3.800 mm Number of grippers: 8 Feedrate max: 150 m/min Continuously variable feed: Yes Saw blade projection: 110 mm Saw blade diameter max: 420 mm Main motor power: 18 kW Scoring saw: Motoric adjustment Groove cutting function: Yes For sensible workpieces: Clamping pressure adjustable Cebvl Eswgla Asf Ejrb Stop side: Right side HOLZMA 2-fingered grippers: Yes HOLZMA Central side aligner: Yes HOLZMA | HOMAG Machine table with air nozzles throughout: Yes HOLZMA Power-Loc: Yes HOLZMA Handling package: Yes HOLZMA Grooving and cutting package: Yes Control: HOLZMA CADMATIC 4.1 PROFESSIONAL Software: HOLZMA HOLZLINK Conformity marking: CE mark Space requirement Length: 6,54 m Space requirement Width: 5,92 m

Condition: excellent (used), Year of construction: 2020, Edge bander Manufacturer: Felder Type: G360-4 Crjbvl Eev A U Upof Ejb Year of manufacture: 2020 Operating hours: approx. 439 h Edge thickness: 0.4 -3 mm Workpiece thickness: 10 - 45 mm Feed: 8 m/min Total output: 5.5 kW Total length: approx. 3,200 mm Joining unit: Yes Cross-cut saw unit: Yes Flush milling unit: Yes Surface scraper: Yes

Condition: good (used), Veneer saw, veneer saw, joint cutting machine, fine cutting machine, fine cutting circular saw Cjbvl Eeb A Hnhef Esrb -Cutting length: 3000 mm -with suction

Condition: used, Year of construction: 1991, Table dimensions 1200 x 730 mm Motor output 4 kW Crjbvl Eswbi H Aof Eob Spindle length 180 mm table height 920 mm spindle stroke 260 mm Weight 580 kg Spindle speed 3000/4500/6000/7000/10000 rpm Max. table protrusion: 230 mm Max. dimensions of the tools that can be lowered under the table: 320 x 90 mm

Condition: used, Motor power: 4.0 PS/HP (3.0 kW), Planer block: 2-field system planer knives, Year of manufacture: 1992, Planing width: 410 mm, Thickness height: 4220 mm, Milling spindle Ø: 30 mm, Accessories: with feed device, Max. chip removal: 5 mm, Cast iron planing tables height adjustable and foldable, Planing guard 410 mm, Planer stop pivoting 90 45 degrees, Thickness planing width 410 mm, Circular saw D30 mm pivoting, Parallel cutting scale, Finely adjustable milling stop, Outrigger table, Max. cutting length 1750 mm, Drill chuck 016 mm, Drill support Crebvl Eswhb Tuof Eob

Condition: used, Year of construction: 2018, Used machine Cobvljnbiple Ef Eerb

Condition: used, Year of construction: 2017, Edgeband thickness max: 15 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 150 mm Workpiece width min: 70 mm Feed min: 14 m/min Feedrate max: 20 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Glue system granulate: glue pot above feeding chain OTT Glue system CM CombiMelt: Yes Quick-change glue pot: Yes Suitable for PUR glue: Yes Magazine for single strips: Yes Spraying device: Yes Crebowglavevl Ef Esb Premilling unit: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 2 Corner rounding unit: 2 motors Nutfräsaggregat: Universalfräsaggregat schwenkbar Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Free spaces for aggregates: 1 Aggregates actuated by control: pneumatic Type: right-side machine Machine length: 7.800 mm Hole recognition: Yes Control: BECKHOFF BECKHOFF Control, Touchscreen Conformity marking: CE mark Total connection: 24,6 kW Weight: 4.000 kg

Condition: used, Input capacity 400mm/200mm Hedgehog trainer almost new entry Knives Crjbvl Ejwbzcvef Eob 37kw-50hp engine Control cabinet

Condition: good (used), Code: 0433 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Crsbvl Efswhy Taj Ejb Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Motor power: 0,8 kW Cjbekwhffovl Ef Eerb Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch press-in die missing!!! Availability: by arrangement Location: Solingen

Condition: used, Year of construction: 2006, Cutting height max: 170 mm Saw blade diameter max: 500 mm Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Rotation speed steps: 3 Crsbvl Efswgk U So Esb Scoring aggregate: Yes Scoring saw width adjustment: electro-motive Controlled axes: Yes Number of controlled axes: 3 Motorised rip fence: Yes Winkelanschlag, Digitalanzeige: Length, Winkel Control: MARTIN TOUCH-SCREEN Conformity marking: CE mark

Condition: used, Used machine Cebvokwhp Nol Ef Ejrb table length approx. 2400 mm Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2023, Independent Z-axes: 2 Number of milling spindles: 2 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Machine table: Special execution, Feed-through technology Special workpiece clamping system: For doors, Vacuum clamping system Feeding: vacuum lifter, Hedgehog magazine Outfeed: Hedgehog magazine, vacuum lifter Safety device: enclosed fence, Light barrier Chip conveyor: Yes Crebvowgk U Eel Ef Eob

Condition: used, Year of construction: 2019, Used raw air extraction unit Year of construction 2019 Nominal capacity 2789 m³/h Filter area 1.8 m² Cebvl Eotr Hfpof Ejrb max. negative pressure 1668 pa Chip collection volume 160 l Motor 1.1 kW 400 V Extraction nozzle 1 x 120 mm, 1 x 100 mm Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2011, Edgeband thickness max: 20 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feed min: 18 m/min Feedrate max: 25 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Csbvjwgk Uxjl Ef Eerb Places in coil magazine: 2 Glue system granulate: Premelting unit HOMAG Glue system A 20 Gluing unit: Yes Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors HOMAG Trimming saw HL 84: Yes Flush/radius/chamfer milling units: 1 HOMAG Flush milling unit BF 10: Yes Corner rounding unit: 2 motors HOMAG Corner rounding unit FK 11: Yes Scraper unit: Profile scraper, Flat scraper HOMAG Scraper unit PN 10 Profile scraping unit: Yes Buffing unit: Yes Type: left-side machine Machine length: 7.845 mm Control: powerControl PC 22 Conformity marking: CE mark

Condition: new, Year of construction: 2024, New dust extractor Year of construction 2024 Technical data: Certified according to BGHM H3* / CE / GS Power consumption 2.2 kW Current consumption IE2 4.4 A Filter area 9.5 m² Dimensions 1575 x 910 x 2110 Dust garbage can volume 1 x 160 l Csbvl Efjruuh De Esrb Weight 405 kg Intake connection 160 mm, right Operating volume flow: 2300 m³/h Volume flow max/nom. 1780/1447 Negative pressure at nominal volume flow 2450 PA Negative pressure in front of the fan at VNenn 3160 PA Maximum sound pressure level 74 dB(A) Filter regeneration pneumatic max. 7.5 bar Operating mode: Continuous operation Compressed air connection must be available Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2018, Working dimension X: 3.110 mm Working dimension Y: 1.620 mm Working dimension Z: 180 mm Crsbvl Ejwgk Uref Eob Number of milling spindles: 1 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Cantilever machine: Yes Machine table: Pod and rail table Safety device: Bumper Chip conveyor: Yes Control: SCM eye-M

Condition: used, Year of construction: 2020, Exhibition machine Year of manufacture: 2020 Equipment and technical data: including suction nozzle d= 250 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW, 400 V / 50 Hz, on / off switch, a potential-free contact for machine monitoring and automatic start / stop function, motor protection switch, volume flow monitoring / pressure difference display, 3 mobile dust bins with inserted chip bag and clamp, solid filter module made of galvanized sheet steel. Technical data: · Maximum volume flow: 5,040 m³/h · Nominal volume flow: 3,532 m³/h · Associated negative pressure: 2,500 Pa · Suction-side connection: d = 250 mm · Operating mode: continuous operation · Current type: three-phase current · Power consumption: 5.5 kW / 11.5 A · Filter area: 25.2 m² · Filter regeneration: automatic, pneumatic · Chip collection volume (total): 480 liters · Chip bags (PE): 600 x 600 x 1100 mm · Weight: approx. 1100 kg · Noise level according to EN 23744: 72 dB (A) · L x W x H: 3,350 x 1,020 x 2,290 mm Crjbvevuctdjl Ef Esb Required connections: · Standard compressed air coupling NW 7 approx. 6 bar, compressed air serviced and cleaned · 1 x 32 A CEE socket Location: Solingen Availability: by arrangement

Condition: used, Year of construction: 2008, Working dimension X: 1.250 mm Working dimension Y: 800 mm Working dimension Z: 60 mm Number of separate aggregates: 1 CNC-axes: 1 Horizontal drills in Y: 1 Dowel insertion: Yes Glue system: Yes Dowel insertion aggregates: 1 Dowel diameter: 8 mm Dowel length max: 35 mm Stationary machine: Yes Alternate loading: Yes Clamping system: Pneumatic clamping Crjbvsud Hmbjl Ef Ejb Safety device: enclosed fence Barcode reader: Yes Barcode control: Yes UPS - Uninterruptible Power Supply: Yes Control: HOMAG POWER CONTROL PC 85T Software: HOMAG WOODWOP 5.0 Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 6 kW

Condition: new, Year of construction: 2022, Exhibition machine Year of construction 2022 Equipment and technical data: Outlet on the right with pneumatic shaking off with powder extinguishing Description : Dust extractor type NE 300 with powder quenching with BGHM approval certificate, including suction nozzle, 5 m cable with plug and reversing switch, electric motor 400V/50Hz, on/off switch, lockable motor protection switch; with compressed air tank and compressed air pulse cleaning or pneumatic / motorized shaking, pressure difference indicator, mobile dust garbage cans with clamping bracket and chip collection bag Power consumption: 7.5 kW Power consumption: 13.5 A Filter area: 31.60 m2 Dimensions: 3440 x 1120 x 2420 Dust garbage can volume: 3 x 160 l Weight: 1210 kg Suction nozzle: 300 mm Maximum/ nominal volume flow: 6000/5085 m3/h Negative pressure at nominal volume flow: 2400 PA Negative pressure in front of the fan at Vnenn: 2950 PA Maximum sound pressure level: 74 dB Operating mode: Continuous operation Necessary connections: - Compressed air standard coupling NW 7 approx. 6 bar, compressed air maintained and cleaned - 1 x 32 A CEE socket Cebvl Eot Sz Nbjf Esrb With this system, uniform filling of the garbage cans cannot be guaranteed in every operating situation due to different extraction volumes and differing chip/dust contents. Availability: short term Location: Solingen

Condition: new, Year of construction: 2023, New machine Year of construction: 2023 NESTRO® dust extractor, a new generation, more powerful, more compact, more economical and with some highlights that will inspire you. Including a new type of extinguishing device with drop flap and oxygen extraction, 5 m cable and CEE plug with reversible pole, IE3 fan drive, H-O-A selector switch and integrated emergency stop function. The NE-J ECO is of course H3-tested. The newly designed model fits into any standard sea container. The suction nozzle with blow-in box and non-return flap is located in the middle of the front of the dust extractor. The highly efficient JET filter regeneration guarantees long filter service life, low filter resistance and therefore high extraction performance. The dust garbage cans are each equipped with 4 swivel castors, a viewing window for checking the fill level and a sturdy chip collection bag. Crobvsruuidel Ef Eeb Technical data: Volume flow max./nom.: 8,000 / 6,925 m³/h Vacuum v.v./nom.: 3,400 / 2,750 Pa Suction side connection: Ø 350 mm Operating mode: Continuous operation Type of current: Three-phase current Power consumption: 11 kW /21 A / 50 Hz Filter area: 38 m² Filter regeneration: JET / automatic Compressed air consumption per cycle: 560 Nltr. Chip disposal: Chip garbage can with PE bag Weight: approx. 1,250 kg Noise value according to EN 11201: 72-74 dB(A) according to MRI (+/- 4dB) Length x width x height: 1,060 x 3,981 x 2,174 mm Necessary connections: Compressed air standard coupling NW 7.2; 6 bar, compressed air dry and oil-free 1 x 32 A CEE connection socket Location: Solingen Availability: short term

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Basic equipment Electromotive height and swivel adjustment 0-46° with automatic correction of the cutting height with swivel Control at eye level, swiveling Double roller carriage, carriage length 3,000 mm Parallel fence, manually adjustable via scale, incl. manual fine adjustment, Cutting width 1,000 mm Angle fence with fixed 90° position, manually adjustable via scale up to 3,200 mm Saw blade projection max. 150 mm max. saw blade Ø 450 mm Drive power 4 kW (5.5 HP) with 4000 rpm AKE tool clamping system for the main saw blade Working height 91 cm Motor 5.5 kW (7.5 hp) with VARIO F45 - Infinitely variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material material increases the cutting quality and service life of the saw blades Extended cutting height for one-sided tilting This option is available for one-sided tilting with a large extraction hood for a max. saw blade Ø of 550 mm and a saw blade projection of max. saw blade projection of max. 204 mm. In combination with a scoring unit saw blade Ø is 500 mm or 179 mm cutting height. cutting height. Only in conjunction with at least 5.5 kW (7.5 HP) drive power Crobvl Esmrxznjf Eob 2-axis scoring unit one. Tilt With electromotive height and side lateral adjustment, scoring blade height programmable with quick lowering and quick raising , Drive motor 0.75 kW (1 hp), 8200 rpm. Retrofitting only possible on machines with preparation for scoring unit possible. LED lighting With particularly energy-efficient LED technology the danger zone of the scoring unit is clearly marked. The Altendorf double roller carriage is famous for its smooth and precise running. It can be locked in any position. The large double castors, precision-machined from hardened hardened steel, hold the upper carriage in in conjunction with the undercarriage with absolute respective hard chrome-plated guide rods. This running quality is maintained even decades of load and soiling. and dirt. The trolley design is extremely torsion-resistant and multi-hollow chamber system. The table surface is precisely planed and anodized. A mounting for the cross slide and an interface and as an interface for various accessories is a hard chrome-plated round rod, which is positively into the upper carriage. The entire unit is low-maintenance and does not require lubrication. On/off switch on the double roller unit The on/off switch on the double roller carriage is always at hand. The four buttons are used to both the main saw blade and the scoring blade are switched on and off. This saves walking and ensures greater safety Angle mitre fence, cutting to length up to 3500 mm This stop patented by ALTENDORF with integrated length integrated length compensation facilitates the precise cutting of angles and miters in one function. one function. In both positions, the angle can be continuously adjusted by 49° and is is indicated by a measuring scale. backlash-free and robust stop flaps can be easily moved and adjusted as a single flap over the entire the entire range up to max. 3500 mm.

Condition: used, Used machine Condition: age-appropriate Technical data: Table size 2600 x 900 mm Max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right Availability: short term Cebvljv Aqx Ds Ef Eorb Location: Solingen

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Automatic horizontal and vertical positioning for absolute and chain dimensions Digital display for horizontal cutting PLC control with 2-line display and plain text display for processing mode and error diagnosis infinitely variable feed rate up to 24 m/min automatic workpiece end detection Calculator function in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm max. trimming height 2100 mm max. scoring height, vertical 2100 mm max. cutting depth 80 mm Motor 5.5 kW Saw blade speed 4500 rpm Saw blade diameter 300 mm Air requirement 1200 m³/h Air speed 20 m/s static negative pressure 1200 Pa Extraction connection: 2 x 120 mm Dimensions L x W x H 5620 (plus extraction nozzle) x 1480 x 2948 mm Room height 2990 mm Compressed air connection: 6 bar Air consumption 50 NL/min Electrical connection value: 5.7 kW With Supercut scoring device With pneumatically pivoting saw unit With longitudinal stop for lower workpiece support With folding rail, short, complete Cjbvl Eju Dru Tef Eorb Availability: by arrangement Location: Solingen