Condition: used, total height: 2,860 mm, total length: 5,720 mm, total width: 1,100 mm, Weight: 825 kg Vertical wall saw Elcon 215 D Max cutting height vertical 2150mm Dkeln Nev Uixgem Nhol Max cutting height horizontal 2105mm Max cutting width 4300mm Cutting depth 60mm Year of construction 2016 Saw blade 250mm 380V 10 Amp 4kW Motor Horizontal and vertical cutting Transport dimensions: 5720x1100x2865mm, weight 875kg - Max. vertical cutting height [mm]: 2150 - Vertical cutting: Yes - Max. horizontal cutting height [mm]: 2105 - Horizontal cutting: Yes - Max. cutting depth [mm]: 60 - Max cutting width [mm]: 4300 - Max. saw blade diameter [mm]: 250 - Documentation available: No - Voltage [V]: 400 - Power [kW]: 4.0 - Transport dimensions: 5720mm x 1100mm x 2865mm (l x w x h) - Transport weight [kg]: 825kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 1998, Used Scheppach RG 4000 dust extractor - dust-tested Technical specifications Hose length: 2500 mm Hose connection diameter: 100 mm Motor power: 1.5 kW, 50 Hz / 400 volts Dkoln Nm Newb Hqxshjl Mobile Extraction drum Availability: Immediately Storage location: 54634 Bitburg

Condition: ready for operation (used), Year of construction: 1987, Working width: 1300mm, workpiece width min./max.: 10mm/1300mm, workpiece thickness min./max.: 3mm/80mm, workpiece height min./max.: 3mm/120mm, min. workpiece length: 100mm, feed: 30m/min, dosing roller diameter: 174mm, application roller diameter: 238mm, installation length: 2000mm, weight: approx. 3250kg. On-site inspection is possible. Dkeln Nm Nswg E Adehel

Condition: used, Year of construction: 2022, Used machine Year of manufacture 2022 Condition: Good Equipment and technical data: Maximum equipment for the professional, optionally with Tersa or spiral cutter block With TERSA cutter block for rapid blade changes TERSA cutter block system enables particularly quiet operation Helix-toothed steel feed roller for constant and even material feed Material feed with two speeds via separate motor The extra-long planing tables enable easy and precise planing of workpieces Work tables are made of gray cast iron, post-annealed and stress-free, thus robust and permanently flat Planing tables open simultaneously to the rear for short setup times Planer thickness table adjustment via handwheel with numerical display for planing height The heavy machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/gray cast iron construction Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller (ideal for economical planing of fine wood) Quality - Made in Europe Features: Tersa planer cutter block No more adjustments or screwing Planer cutters change in seconds Self-locking Extremely quiet operation Material feed Helix-toothed steel feed rollers for constant and even wood feed without marks Multiple teeth engage simultaneously for powerful feed Wear-free unlike rubber feed rollers Permanently mounted extraction hood Thanks to the permanently mounted extraction hood, reconnecting the extraction hose is no longer necessary during conversion. This saves valuable working time Simultaneous opening of the planing tables Simultaneous folding of the planing tables with tension spring support for quick and convenient conversion to thicknessing in seconds Thicknessing table adjustment FS 41 elite s with thicknessing table adjustment via handwheel with integrated display The thicknessing table is mounted on four large spindles, ensuring maximum stability under all working conditions. Thanks to the special lifting device, the table position is maintained perfectly even without locking. Kickback guards Solid kickback guards prevent workpieces from kicking back. The 4-knife cutter block ensures an optimal planing finish. Anodized aluminum planer fence Large dimensions (1200 x 150 mm) Djlewbay Hen Nm Nhekl Easy to move Tilt from 90° to 45° via scale Standard with auxiliary fence for safe planing, even of narrow workpieces. Scope of delivery: Planer and jointer fence with round bar guide 2 feed speeds Tersa cutter block Technical specifications Planer total table length: 2200 mm Planer length of feed table Planer table height Planer working width: 410 mm Planer chip removal: max. 5 mm Planer fence dimensions: 1200 x 150 mm Planer fence pivoting range Thickness table dimensions: 775 x 410 mm Thickness working height: min. 3 mm mm Maximum working height: 240 mm Min. working length: Feed speed: 6 / 12 m/min Planer block speed: 5000 rpm Planer block diameter: 95 mm Number of planer knives: 4 Electrical connection: 400 V / 50 Hz Motor power: 5.0 kW Dimensions

Condition: excellent (used), Year of construction: 2008, Functionality: limited functionality, Weinmann: Wbz160/12 Space-saving joinery Important – miter cuts and slant cuts are possible. Equipment 7.5 kW work spindle with Flex 5 unit (Flex 5 - replaced in March 2025, price CHF 40,000) Dolswgchqsn Nm Nhokl Water-cooled Speed range 1500-18000 L/min Tool changer with 12 tool units Workpiece dimensions Minimum cross-section 20x50mm Maximum cross-section 200x405mm Maximum timber length 13 meters Minimum outfeed length 300mm Workpiece feed: gripper Software: WEINMANN WUPWORKS 4 Conformity marking: CE mark Space requirement length: 32.5 m Space requirement width: 5 m

Condition: excellent (used), HW adjusting nut 160x4-7.5x309 mm Z4 + v4, - MAN Insertion depth! 35 mm.- Dkolnowcznhj Nm Nhol Unused

Condition: used, Year of construction: 1979, Multiblade saw Gabbiani SA 350 Motor 30 HP, 45 Amp, 380V Saw blade max 350mm Width transport chain 300mm Max height 120mm - Year: 1979 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT Dksln Nm Nov Uixaohel VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: not inspected (used), Year of construction: 1996, Manufacturer: POUWELS Model: DEF 550 Machine type: Stair stringer Year of manufacture: 1996 Item number: 105 Location: Ex-warehouse: 54634 Bitburg Availability: Immediately Technical specifications: Laser Milling: Longitudinal direction Milling width Passage height: 150 mm Milling unit: Main motor: 5.5 kW Design: Stationary machine Adjustment: Control system Space requirement: Length Space requirement: Width Space requirement: Height Dkslnswb Hpnj Nm Nhsl Location: Ex-warehouse: 54634 Bitburg - available immediately - Machine was in operation at the customer's site until recently, but has not been tested yet, as we have not had time to do so.

Condition: ready for operation (used), Year of construction: 2017, A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible. Dslnowg Ez Te Nm Nhekl

Condition: excellent (used), Year of construction: 1996, 10 x Autoclave / Hardening boiler Manufacturer: Scholz & Co. Dkjlog D Hxmsn Nm Nhel Year of construction: 1992-1996 Working pressure: 16 bar Working temperature: 203° C Volume: 85,500 liters Diameter: 2,200 mm Cylindrical length: 21,900 mm Total length: ca. 24.000 mm Charging medium: saturated steam Quantity: 10 units (all identical) The autoclaves have a Scholz quick-closing door and are in very good condition!

Condition: new, Year of construction: 2023, Functionality: fully functional, The Brugger PX130 wood chipper is operated via the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 13 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 13cm - Weight 420kg - PTO speed: 540 rpm - Horsepower tractor: 30-70 hp Dolorblwdsn Nm Nhokl

Condition: excellent (used), Profile plate flattening cutter 220x31x30 mm, 2 teeth + 2 teeth, M31, 1 Unused Djln Nm Nowczm Rohskl

Condition: used, Year of construction: 1995, Multi-blade saw Sicar MS 30 Dolev Uiw Nsn Nm Nhskl Saw blade min/max 250/350mm Saw blade bore 70mm Width of transport chain 300mm Maximum cutting height 120mm Min. cutting length 420mm 30HP Engine Transport dimensions: 2300x1700x1500mm LxWxH, weight 1700kg - Year: 1995 - Documentation available: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2025, operating hours: 8 h, Machine in pre production *planned to be ready appr. end of may 2025 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Doln Nmoxfwds Nhskl Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: ready for operation (used), Year of construction: 2018, Adhesive: PU (reactive PUR adhesives), material gap height: 0mm-50mm, application speed: 45m/min, working width: 1300mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Dkeln Nswg E Akem Nhel

Condition: new, Year of construction: 2023, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed Dkslnorblx He Nm Nhel - Diameter up to 17cm - Weight 570kg - PTO speed: 540 rpm - HP tractor: 40 - 100 HP

Condition: used, Bäuerle Type 201 tilting spindle router for profiling and milling wood with electric height and tilt adjustment, as well as an Aigner integral stop and feed unit. table width: 2.000 mm Dolnswdrvxs Nm Nhjkl Direction of rotation: Left Right Spindle ø: 30 mm clamping length: about 120 mm number of revolutions: 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm

Condition: used, Multi-blade saw Gabbiani SA 300 Chain transport width 300mm Min-max saw blade diameter: 200-300mm Main engine 30PK Cutting height 100mm Transport dimensions: 1800x1700xH1500mm, weight 1500kg Dkslnov Uiw Aj Nm Nhsl - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2024, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C Dksln Njd Nm Siom Nhjl - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: new, Year of construction: 2025, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, rapid traverse Y-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 15 m/min, workpiece length (max.): 3,200 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 200 mm, workpiece weight (max.): 1,500 kg, Equipment: rotational speed infinitely variable, At Danmar Machines, we never stand still. We continue to lead the CNC world by simply doing what we love most: innovating, being reliable and ensuring that our customers are satisfied. We are always working on improving and trying to exceed expectations every time. Our team of technicians and designers is constantly working on coming up with smart, precise and powerful solutions. No challenge is the same, and we understand that all too well. That is why we think along with you and ensure customization that fits your situation exactly. compact- high precision machining center ( 0.01) Transport> Installation> CadCam software > starter kit cutting tools. Dimensions working area  1300 x 2600mm € 28,500,-  1600 x 3200mm € 31,500,-  2100 x 3200mm € 34,900, BudgeCraft CNC milling machines are assembled in the Netherlands according to the machine guidelines EG2023 EURPE CE-Norm. CE-Marking PILZ the spirit of safety Work table: The heavy chassis is a statically and dynamically welded construction, which is produced from stabilized steel. The solid construction ensures stability and high precision Portal: Portal construction high precision by means of Qantry drive accurate, - requires little maintenance. Qantry's linear guides that are driven on both sides meet the highest requirements in terms of precision and dynamics. Rack and pinion in X and Y axes guarantee high-precision movement. fast acceleration> deaccelerations, fast tool change. Milling motor ATC Spindle: Inverted controlled milling motor. 3 – 4 axes controlled 24,000 rpm. double linear high-precision guides guarantee utmost accuracy. The 2nd Z-axis is positioned by the ball screw spindle, this enables 3D and relief machining. Tools are automatically clamped. Drive: Brush pink servo motors: These motors enable accelerations and very high speeds. The use of these motors reduces maintenance thanks to the digital control and feedback. In addition, they ensure precision and a better finish during machining. Lubrication: To prevent lubrication problems during, this machine is equipped with a centralized automatic lubrication system Linear tool magazine: 10-12-16 position tool changer, automatic change during machining. Reference stops: less cutting loss, fast and efficient positioning with the stop cylinders on the front. Automatic measuring system for tooling: Work table and vacuum zones: Nesting CNC machining centre. Perfect nesting with the matrix vacuum table. With the well-thought-out grid geometry it is possible to vacuum clamp all formats and shapes. Reference stops can be mounted directly on the table in consultation. Vacuum zones can be easily selected on the sheet size, for carefree and safe material processing. Milling spindle protection cover: An important safety device that protects the motor from external objects and particles. CNC/NORM EG2023-EUROPE security: X-axis working area: 2600-3200mm Y-axis working area: 1300-1600-2100mm Dkjlnowc Uadj Nm Nhsl Z-axis stroke: 200mm Construction quantity: Yes Milling motor: 9Kw Servomotor (ATC spindle) Speed: 1,000-24,000 RPM X-axis travel: 50m/min Y-axis travel: 50m/min Z-axis travel: 15m/min tapping: ISO30-ER32-ER40 Software: Pegasus PWoodEntry Vacuum pump: included

Condition: used, Bäuerle rigid milling machine with feeder Deljwf U Dhjn Nm Nhekl External dimensions approx. L x W x H 1150 x 1200 x 1100 mm Technical specifications available upon request

Condition: used, Multi-blade saw OGAM PO-340 Saw blade min-max 250-350mm Saw blade bore 70mm Max axle distance between first and last saw blade 340mm Width of transport chain 340mm Max height 110mm Minimum working length 440mm Max working width 560mm Feed speed 5 to 35 m/min Dkolnov Uiwvs Nm Nhol Distance from column to conveyor chain 60HP Engine Transport dimensions: 2550x1700x1580mm LxWxH, weight 2550kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Hess gluing stand 5 cylinders vertical (pneumatic) Maximum pressing height = 1850 mm Dkeln Nm Njwf U A Rohol Length approx. 2500 mm Heating rail All information is subject to change without notice.

Condition: used, Year of construction: 2011, Undercut crosscut saw Avola Gama 65 K Year of construction 2011 Main engine 10kW, 3000rpm Cutting speed 102 m/s Saw blade diameter 650mm Cutting height 90/45/30° degrees 245/164/113mm Djlnsv Uiwps Nm Nhskl Table dimensions 1500x1500mm Including roller conveyors - Year: 2011 - Documentation available: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets