Condition: good (used), Kettenstemmer, chain mortiser Eccentric clamp Chain 50 x 175 mm Port 380 Volt Location: Off the shelf 54634 Bitburg Dkeb Eodtri Uo Sbq Aol

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt 5 amps, 50 Hz, Machine no.: 4/14242 Dust bag Dkjb Eob Auu Re Sbq Ael Location: Ex warehouse Bitburg

Year of construction: 1994, Condition: excellent (used), Blum Minidrill M51N1000.50 drilling and fitting machine Year of manufacture 1994 drilling pattern: Euro basic ruler 3 stop extensions Dob E Sjhi Rgdobq Ajkl 4folding stops Drilling depth adjustment Pneumatic connection connection: 380 V motor: 0,75 kW incl. mobile frame with drawers Mobile Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine recognition Clean air extraction system with H3 approval Suction connection: 120 mm Nominal motor power: 1.5 kW / 3 Ph Dksb E Sbqshkztwj Asl Voltage: 400 V / 50 Hz Maximum volume flow: 1,140 m³ / h Nominal volume flow: 814 m³ / h Negative pressure: 2.180 Pa Filter area: 5,1 m² Chip collection volume: approx. 135 litres Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Dimensions and weights Weight approx. 489 kg Connection suction Suction port diameter 120 mm Suction port diameter saw blade protection 60 mm Dsb E Sbshkz Ezsq Aekl Electrical data Power drive motor 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Circular saw unit Cutting width with rip fence 900 mm Max. Cutting width left of saw blade 3200 mm Trimming length 3260 mm Saw blade inclination 90 45 ° Max. cutting height Cutting height 90° 90 mm Max. cutting height Cutting height 45° 63 mm Explanation Max. cutting height Independent of scoring device Diameter saw blade 315 mm Explanation Diameter of saw blade Independent of scoring device Saw blade speed 4000 min¯¹ Sliding carriage and table Length of sliding table 3200 mm Width of sliding table 360 mm Height of sliding table 142 mm Table length 840 mm table width 560 mm table height 900 mm Scoring unit Diameter saw blade 100 mm Saw blade speed 8000 min¯¹ The solid work table made of heavily ribbed grey cast iron and the base frame made of welded steel guarantee high torsional stiffness and vibration-free work Smooth-running and precise sliding carriage made of anodized aluminium with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guideways Cast iron saw unit with permanently precise double swivel segment guide and zero-point swivel, 6 years Holzkraft warranty on wear of the swivel segments Equipped with powerful three-phase motor Saw blade tilting is controlled at a Ska

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Deb E Sbqohkz E Tj Ajkl Thickness working height min. 3 mm working height max. 230 mm Chip removal max. 5 mm Electrical data Power drive motor 5 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Robust steel/cast iron construction Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) With precise round bar guide Suction hose connection The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: new, Year of construction: 2025, Closed and safe sawing area for more safety due to legally prescribed saw protection device Anti-twist protection of the wood due to stamped barbs in the rocker Stable, torsion-resistant steel frame Trolley for easy transport Shock, scratch and weather resistant due to high quality powder coating Phase inverter Dimensions and weights Working height 700 mm Rocker support 740 mm Length approx. 1030 mm width/depth approx. 770 mm Height approx. 1095 mm Weight approx. 92,5 kg Drive Type of drive Electric motor with direct drive Electrical data Input power 5 kW Supply voltage 400 V Mains frequency 50 Hz Dksb E Sjhkz Hisbq Aol Saw blade diameter 700 mm Cutting capacity Rocker roundwood 250 mm Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, Holzkraft Extractor RLA 210 For wood dust and shavings, designed for commercial use Item number: 5132100 Brand: Holzkraft Dimensions and weights Shavings collection volume: 2 x 165 l Nominal diameter of the external suction nozzle inlet: 200 mm Length: approx. 1755 mm Width/depth: approx. 830 mm Height: approx. 1800 mm Weight: approx. 259 kg Dsb E Sbqshk Dfrs Ajkl Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise emission Sound pressure level: max. 72 dB(A) Voltage flow: Nominal flow rate: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with low noise Space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor is delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminized polyester fleece, washable and therefore with a long service life Filter is tested and approved as standard in an antistatic version according to category M-BIA Filter resistance monitoring via differential pressure cell, adjustable with a warning light on the unit Control box The fan is installed downstream of the filter. Equipment details With a new locking device for secure container positioning. Location: From stock, 54634 Bitburg - Available at short notice.

Year of construction: 2022, Condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, Dsb E Soihahmjbq Aekl suction nozzle Ø: 1 x 100 / 50 mm each, weight: 450 kg Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Location: Ex stock 54634 Bitburg - free on truck - - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Combined planer-thicknesser - immediately available - Ideal for demanding craftsmen and carpenters The extra long planing tables made of one piece allow easy planing of the workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open simultaneously to the rear with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during retooling, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Kdf9ktm Weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm Dksboih Dxdo E Sbq Ajl fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thickness table Length 850 mm Thickness table width 520 mm Working height min. 3 mm Working height max. 240 mm working length min. 220 mm chip removal max. 5 mm Electrical data Supply voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planer cutterhead Type TERSA diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ planing width max. 520 mm Feed rate speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Sturdy cast iron steel construction Large dimensioned milling unit made of cast iron, swivels up to -45° backwards Indication of the milling speeds by LEDs Fast, trouble-free speed change via eccentric voltage Right-left rotation Display of height and inclination 1/10 mm accurate Milling fence in heavy professional design: with fine adjustment via toothed rack, with numerical display, aluminum stop jaws, 3-fold positionable for fast repetition of the adjustment TECHNICAL DATA Suction connection suction port diameter 2 x 120mm working table working table length 2500mm Dkjb E Sbsiidnfeq Asl Working table width 655mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 - -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ spindle mandrel diameter 30mm Milling tool diameter max. tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 210 - 240mm tool diameter max. tenon milling 320mm SUPPLY Aluminum milling stop jaws Arch milling protection hood Motorized height adjustable and swiveling milling spindle Digital display of the set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Dkeb E Sbqsdx R Tfo Ajl Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: new, Year of construction: 2025, Motorized thickness table hub with two speeds Numerical display for working height Thicknessing table in cast iron The thicknessing table is supported by four large trapezoidal thread spindles for maximum stability and precision Four speeds Optional with two roles in the thicknessing table Equipped with noise and chip protection curtain at the factory Tueckein and outlet Adjustable roll pressure Front feed roller with helical gearing Pull-out roller with rubber coating Powerful industrial motor Equipment details Models TERSA with Tersa Planer knife shaft Planer blades change in seconds When starting the machine, the blades are automatically tensioned - self-arretierend by the centrifugal force The knife protrusion will automatically without the use of setting gauges Dobod Hx E Ij E Sbq Ajkl Work table The working table is supported by four large trapezoidal screw spindles provide greatest stability under all operating conditions As standard with electric table adjustment The Special lifting device correctly maintain the table position, also without lock Helical steel feed rollers for a constant and uniform wood feeding Second, rubber feed roller in the spout Massive arrestors prevent kickback of workpieces A 4-meter shaft ensures an optimal planing image Dimensions and weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Connect dust extraction

Condition: as good as new (ex-display), Year of construction: 2025, Planer Thicknesser with TERSA Planer blade quick change system. With TERSA quick-change system for fast planing blade replacement TERSA Planer blade system allows for especially quiet running Diagonally serrated steel feed roller for constant and uniform material feed Robust dressing tables made of ribbed grey cast iron, milled and stress-free, this resistant and durable plan Large, pivoting dressing stop for precise alignment, 90 ° / 45 °, with quick clamping Back opening dressing table Powerful motor Robust steel / cast iron construction Milling can be retrofitted Equipment details TERSA Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Debedqy Uqj E Sbq Ajkl Perfect plane results Surface Planer Fitted as standard with the TERSA Planer blade quick change system Large dressing tables The dressing and fixed width tables made of grey greeting guarantee highest quietness and vibration-free. Thickness Planer With the powerful thickness feed, workpieces can be planed up to 200 mm height. The helical feed roller guarantees the constant feeding. The conversion of Abrichtzu thickness Planer is in seconds with one hand. Drive Stable-focused chain drive Steel drive wheels Massive cast iron pillow block Planing mill Massive arrestors prevent kickback of workpiece

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dsb E Sbedqzhhjq Askl Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: new, Year of construction: 2025, Rehnen shelf trolley Varioflex Dkjb E Sbqobumtio Ajl Flexible paint drying trolley Stable tubular frame construction 17 shelves Extendable and lockable from 200 to 2000 mm 4 polyamide swivel castors Load capacity 400 kg Support tubes galvanized Optional: additional rake Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1980 mm Support tube length: 650 mm Extended to: 1150 mm Clearance between tubes: 60 mm Load capacity: 400 kg Immediately available Trolley can also be shipped for 75,- Euro net in Germany

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Dobjcdy I Ts E Sbq Askl Location: Ex stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine must have. A solid cast iron sanding unit with a powerful powerful motor ensures maximum sanding performance. The working table, adjustable in height by spring pressure, allows optimum belt utilization and safe working. Belt oscillation, infinitely variable unit swiveling, and veneer unit, a veneer sanding device and an additional table for and an additional table for sanding work on the on the deflection roller. The machine is supplied with an assortment of sanding belts; an angle and miter fence is also included. Technical data: - Motor power: 2.2 kW - sanding belt size: 150 × 2280 mm - grinding belt speed: 22 m/sec. - table size: 750 × 350 mm - space requirement: 1000 × 800 mm - weight: from 180 kg - Suction Ø: 100 mm Dkeb Ejd R Ev Do Sbq Ajl Location: Ex warehouse 54634 Bitburg - free loading - Can be shipped for a fee

Condition: new, Year of construction: 2025, Motorized thicknessing table stroke with two speeds Numerical display for working height Grey cast iron thicknessing table The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Noise and chip protection curtain at workpiece infeed and outfeed as standard Adjustable roller contact pressure Front infeed roller with helical toothing Pull-out roller with rubber coating Powerful industrial engine Equipment details Models TERSA with Tersa planer blade shaft Planer blade change in seconds When the machine is started, the planing knives are automatically clamped by centrifugal force - self-locking The blade projection adjusts automatically without using setting gauges Work table The work table is supported on four large trapezoidal threaded spindles, which ensure maximum stability in all working conditions With electrical table adjustment as standard Due to the special lifting device, the table position is maintained even without locking Dkeb Eoff Efas Sbq Ajl Helical toothed steel feed rollers for a constant and even wood feed second, rubberized feed roller at the outlet Massive recoil protectors prevent the recoil of workpieces A 4-knife shaft ensures an optimal planing pattern Dimensions and weights Length approx. 1305 mm width/depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter thickness 150 m

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Dkebslht Hwj E Sbq Ajl Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Year of construction: 2008, Condition: excellent (used), Electric heating element Shock- and impact-proof plug-in heating system with heating conductors embedded airtight in silicone.No wear, no corrosion, operational safety even in continuous operation and in case of impacts and shocks. Temperature adjustment via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressing surfaces on all sides. Gold anodized finish as standard, scratch and abrasion resistant, easy to clean. Size:Type: EST 21 Length: 2100 mm Connected load: 1100 Watt, 230 Volt Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Dkeb Eslcd Szo Sbq Asl Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, For machining smaller parts, especially solid wood Simple and safe operation Combined sanding unit with sanding shoe for calibrating solid wood Control panel on the front side Standard with ribbed steel roller Ø 120 mm and hard sanding shoe with graphite coating on exchangeable insert Motorized height adjustment of the working table Electronically controlled sanding belt oscillation Manual star/delta start of the motor Mechanical measurement of the table position Ammeter for displaying the current consumption of the grinding unit Two feed belt speeds Electromagnetic brake Combination unit for calibrating and grinding Ribbed steel roller Ø 120 mm with height fine adjustment Hard grinding shoe with graphite pad Universal version for calibrating and sanding of solid wood Model BBS 630 C Article-No. 5343065 Technical data working width 630 mm diameter of the working roller 120 mm sanding belt width 650 mm Dkjb E Sbqscnw U Rj Asl Sanding belt length 1600 mm Speed of the sanding belt 18 m/s Min./max. workpiece height 3/160 mm Feed speed 4,5 / 9 m/min. Motor power 5 kW / 400 V Gear feed motor 0,43 Height adjustment motor 0,18 kW Compressed air consumption 20 l/min. Operating pressure 5,5 bar Operating pressure belt blower 8 bar Suction pipe diameter 150 mm Suction capacity 3.000 m³/h Dimensions mm 600 x 1010 x 1500 mm Weight 770 kg Location: Comes to stock 54634 Bitburg

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces Dksbjcnxayj E Sbq Ajl 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: new, Year of construction: 2025, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Dsb E Secnxa Sobq Aekl Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557

Condition: new, Year of construction: 2024, axis 920 mm Dkeb E Socnz H Hebq Ael x-axis 3000 mm material thickness Z 12 mm - 30 mm feed speed 20 m/min. A - axis 360 degrees Minimum dimension: plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. depth Depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required suction capacity: 2300 m3/h Location: Ex stock 54634 Bitburg - immediately available -