Condition: excellent (used), Profile plate flattening cutter 220x31x30 mm, 2 teeth + 2 teeth, M31, 1 Dueljwczm Roq I E N Hot Unused

Condition: new, Year of construction: 2025, operating hours: 8 h, Machine in pre production *planned to be ready appr. end of may 2025 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors Dslq I E Njxfwdo Hout + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Bäuerle Type 201 tilting spindle router for profiling and milling wood with electric height and tilt adjustment, as well as an Aigner integral stop and feed unit. table width: 2.000 mm Direction of rotation: Left Right Spindle ø: 30 mm Duslq I Eewdrvxe N Het clamping length: about 120 mm number of revolutions: 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm

Condition: new, Year of construction: 2023, Functionality: fully functional, The Brugger PX130 wood chipper is operated via the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 13 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 13cm Djlq Iorblwds E N Heut - Weight 420kg - PTO speed: 540 rpm - Horsepower tractor: 30-70 hp

Condition: excellent (used), Year of construction: 1996, 10 x Autoclave / Hardening boiler Manufacturer: Scholz & Co. Year of construction: 1992-1996 Working pressure: 16 bar Working temperature: 203° C Duolq I E Nsg D Hxmj Hot Volume: 85,500 liters Diameter: 2,200 mm Cylindrical length: 21,900 mm Total length: ca. 24.000 mm Charging medium: saturated steam Quantity: 10 units (all identical) The autoclaves have a Scholz quick-closing door and are in very good condition!

Condition: new, Year of construction: 2025, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, rapid traverse Y-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 15 m/min, workpiece length (max.): 3,200 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 200 mm, workpiece weight (max.): 1,500 kg, Equipment: rotational speed infinitely variable, At Danmar Machines, we never stand still. We continue to lead the CNC world by simply doing what we love most: innovating, being reliable and ensuring that our customers are satisfied. We are always working on improving and trying to exceed expectations every time. Our team of technicians and designers is constantly working on coming up with smart, precise and powerful solutions. No challenge is the same, and we understand that all too well. That is why we think along with you and ensure customization that fits your situation exactly. compact- high precision machining center ( 0.01) Transport> Installation> CadCam software > starter kit cutting tools. Dimensions working area  1300 x 2600mm € 28,500,-  1600 x 3200mm € 31,500,-  2100 x 3200mm € 34,900, BudgeCraft CNC milling machines are assembled in the Netherlands according to the machine guidelines EG2023 EURPE CE-Norm. CE-Marking PILZ the spirit of safety Work table: The heavy chassis is a statically and dynamically welded construction, which is produced from stabilized steel. The solid construction ensures stability and high precision Portal: Portal construction high precision by means of Qantry drive accurate, - requires little maintenance. Qantry's linear guides that are driven on both sides meet the highest requirements in terms of precision and dynamics. Rack and pinion in X and Y axes guarantee high-precision movement. fast acceleration> deaccelerations, fast tool change. Milling motor ATC Spindle: Inverted controlled milling motor. 3 – 4 axes controlled 24,000 rpm. double linear high-precision guides guarantee utmost accuracy. The 2nd Z-axis is positioned by the ball screw spindle, this enables 3D and relief machining. Tools are automatically clamped. Drive: Brush pink servo motors: These motors enable accelerations and very high speeds. The use of these motors reduces maintenance thanks to the digital control and feedback. In addition, they ensure precision and a better finish during machining. Lubrication: To prevent lubrication problems during, this machine is equipped with a centralized automatic lubrication system Linear tool magazine: 10-12-16 position tool changer, automatic change during machining. Reference stops: less cutting loss, fast and efficient positioning with the stop cylinders on the front. Automatic measuring system for tooling: Work table and vacuum zones: Nesting CNC machining centre. Perfect nesting with the matrix vacuum table. With the well-thought-out grid geometry it is possible to vacuum clamp all formats and shapes. Reference stops can be mounted directly on the table in consultation. Vacuum zones can be easily selected on the sheet size, for carefree and safe material processing. Dslqowc Uado I E N Hsut Milling spindle protection cover: An important safety device that protects the motor from external objects and particles. CNC/NORM EG2023-EUROPE security: X-axis working area: 2600-3200mm Y-axis working area: 1300-1600-2100mm Z-axis stroke: 200mm Construction quantity: Yes Milling motor: 9Kw Servomotor (ATC spindle) Speed: 1,000-24,000 RPM X-axis travel: 50m/min Y-axis travel: 50m/min Z-axis travel: 15m/min tapping: ISO30-ER32-ER40 Software: Pegasus PWoodEntry Vacuum pump: included

Condition: new, Year of construction: 2024, Availability upon request Very robust machine with high pressing force - also suitable for producing briquettes of saleable quality *depending on the material. The large pressing cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, further development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Supplement for demonstration cooling unit + €4,980 net, (can also be retrofitted later) * Cools the pressing tongs (important for use after 4 hours) and the hydraulic oil * Cooling unit recommended for regular use of more than 4 hours at a time. Tariff number: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Max. briquette stroke: 100 mm, Optional briquette stroke: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk density, *based on a bulk density of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil capacity: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Delq I E Ned Nm Sij Hjut Cooling option for pressing tongs: yes, with optional coolable pressing tongs Cooling option for hydraulic oil: yes Cooling of the pressing tongs and hydraulic oil with a cooling unit (optional accessory) Level monitoring option: yes Extruded briquette option; Yes (depending on material) Optional enlarged feed slide: Yes, with special accessory enlarged feed slide CE compliant Raw material requirements: - The moisture content (dry) must be between a minimum of 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: Temperature-controlled room at a minimum of +5°C - The feed must be free of metals and mineral contaminants such as sand, stones, etc. This may result in damage to the press tools and/or increased wear.

Condition: used, Year of construction: 1998, total width: 2,400 mm, total height: 2,500 mm, total length: 2,240 mm, Empty weight: 2.840 kg - Number of motors: 3 - Year: 1998 - Documentation available: No - Serial number: SA/003807 - Voltage [V]: 400 - Transport dimensions: 2240mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 2840kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Djlq I Eev T U Nnj N Hjut Glenn Smeets

Condition: new, Year of construction: 2023, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. Duolorblx Heq I E N Hst - Hydraulic feed - Diameter up to 17cm - Weight 570kg - PTO speed: 540 rpm - HP tractor: 40 - 100 HP

Condition: used, Bäuerle rigid milling machine with feeder External dimensions approx. L x W x H 1150 x 1200 x 1100 mm Dueljwf U Dheq I E N Hst Technical specifications available upon request

Condition: used, Year of construction: 2017, Workpiece width max: 1.200 mm Workpiece length max: 13.500 mm Aggregates total: 1 Number of sawing aggregates: 1 Number of milling aggregates: 1 Mortising aggregates: 1 5-axes technology: Yes Automatic marking: Yes Labelling: Yes Workpiece feed: clamp gripper Declaration of CE-conformity: Yes Conformity marking: CE mark Total connection: 35 kW Weight: 17.000 kg Space requirement Length: 32 m Space requirement Width: 6 m Dslq I E Nev Tqvwe Heut Space requirement Height: 4,5 m

Condition: good (used), Code: 0110 Brand: OMS SALVARANI Model: FC 350 R - CE Standard Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 90 Duslq I Eewhffzo N Hst

Condition: ready for operation (used), Wide planer Constant table Duolqewg S Tvj I E N Hot Maximum planing width: 605 mm Planing height (2 sides): 200 mm Planing height (4 sides): 170 mm Planer blocks with 6 knives

Condition: used, Year of construction: 1998, total width: 2,450 mm, total height: 2,800 mm, total length: 3,500 mm, Empty weight: 5.800 kg Price: On request - Number of motors: 6 - Year: 1998 - Documentation available: No - Serial number: SA/003806 - Voltage [V]: 400 - Transport dimensions: 3500mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information Delqsv T U Nhj I E N Hjut VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1982, Functionality: fully functional, machine/vehicle number: 4/2000, table length: 2,500 mm, table width: 1,100 mm, total width: 1,350 mm, total height: 1,830 mm, total length: 3,400 mm, height adjustment type: electric, input voltage: 400 V, Long Belt Sander, Long Belt Sander, Belt Sander, 2.5 m Delq Iev Uqbis E N Hout Space required: H/W/D 183.0 x 340.0 x 135.0 cm Workbench dimensions: Length: 250 cm Width: 110 cm Including sanding belts: 6 x P50 Connection: 400 V high voltage Table electrically height-adjustable Extraction nozzle diameter = 160 mm The machine operates without problems and can, of course, be tested on-site. Storage location: 90768 Fürth, freight-free, unpacked Sold in the current condition, as seen, without overhaul, without guarantee or warranty All information is provided without guarantee!

Condition: used, Hess gluing stand 5 cylinders vertical (pneumatic) Maximum pressing height = 1850 mm Length approx. 2500 mm Heating rail Dslq I Eewf U A Re N Hjut All information is subject to change without notice.

Condition: used, Year of construction: 2022, Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Workpiece length min: 140 mm Workpiece width min: 55 mm Feed min: 10 m/min Feedrate max: 20 m/min Continuously variable feed: Yes Electromotoric height adjustment: Yes Glue system granulate: glue pot above feeding chain SCM Glue system VC-S4.1: Yes SCM Glue system SGP Smart Glue Pot: Yes Quick-change glue pot: Yes Suitable for PUR glue: Yes Magazine for single strips: Yes Spraying device: Yes SCM Spraying device AAR Anti-adhesive spray unit: Yes Spraying device Lubricant: Yes Spraying device Cleaning agent: Yes Premilling unit: Yes STEFANI Premilling unit RT-E: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes SCM Easy Size Plus: Yes Trimming saw: 2 motors SCM Trimming saw K/SEL: Yes Flush/radius/chamfer milling units: 1 SCM Fine milling unit R-HP MULTIEDGE2R: Yes Corner rounding unit: 2 motors SCM Corner rounding unit ROUND SK MULTIEDGE: Yes SCM Edsystem: Yes Scraper unit: Profile scraper, Flat scraper Duslq Isv Tn Aze E N Hjt SCM Scraper unit RAS-HP MULTIEDGE 2R: Yes SCM Scraper unit RC A/2C: Yes Suitable for nesting: Bündig/Radius/Fasestationen, Profile scraper, Flat scraper Buffing unit: Yes STEFANI Buffing unit SPN: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 5.655 mm Automatic lubrication: Yes Narrow-part infeed: Yes Control: SCM eye-M Software: SCM MAESTRO ACTIVE EDGE Conformity marking: CE mark

Condition: new, Year of construction: 2023, machine/vehicle number: MR004925, Top performance at a competitive price. That characterizes this thicknesser. A constant feed of the workpiece is guaranteed by the grooved infeed roller. A perfect finish by the sanded outfeed roller. Price is ready to use af hine is equipped with the following options: Duolq Iorxcnde E N Hjt - Tersa shaft with quick-change system. Z=4. - Electric high/low adjustment Technical specifications: - Diameter chisel shaft: 95 mm - Maximum planing width: 410 mm - Maximum chip removal: 5 mm - Maximum working height: 240 mm - Diameter extraction nozzle: 120 mm - Speed milling spindle: 5000 /min - Table dimensions: 423 x 775 mm - Motor power: 5.5 hp - Serial number: KK00038806

Condition: used, Table size approx. 2500 mm x 800 mm Manual height adjustment Without top belt cover Belt length 7500 mm Weight approx. 800 kg Dimensions approx. L x W x H approx. 3800 x 1700 x 1600 mm Dolqewf Uz Ts I E N Hsut All information is subject to change without notice.

Condition: used, Year of construction: 2014, Cutting length: 4.300 mm Pusher stroke: 4.250 mm Delqjv Tn A Ij I E N Heut Number of grippers: 7 Feedrate max: 130 m/min Continuously variable feed: Yes Saw blade projection: 80 mm Saw blade diameter max: 350 mm Main motor power: 11 kW Scoring saw: Yes Labelling: manually, Yes Lift table in front: Yes For sensible workpieces: Clamping pressure adjustable Stop side: Left HOLZMA | HOMAG Machine table with air nozzles throughout: Yes HOLZMA 2-fingered grippers: Yes Control: HOLZMA CADMATIC 4.1 Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: good (used), Scheer Veneer Saw Duolewf Uztjq I E N Hot Cutting length approx. 3000 mm Handwheel tensioning Chain feed L x W x H approx. 4200 x 800 x 1400 mm All information is subject to change without notice.

Condition: used, Year of construction: 2011, Working width: 300 mm Planing height: 120 mm Number of spindles: 11 Bottom spindles: 3 Right spindles: 3 Spindles left: 3 Spindles top: 2 Spindle configuration: u-o-r-l-r-l-u-o-u-r/l Spindle rotation speed max 1/min: 6.000 rpm Spindle diameter: 50 mm Feedrate max: 220 m/min Continuously variable feed: Yes Djlq I E Nsv A U U Ae Hjut Feed motor: 45 kW Main motor power: 70 kW Saw shaft: Yes Saw shaft: 70 kW Vertical cleaving spindle: Yes Jointing technology: straight jointer Spindle(s) with counterbearing: Yes Hydraulic clamping: Yes Seperate motor per spindle: Yes Motoric adjustment: Programmable controller Surface of the machine table: hard-coated WEINIG MarathonCoating: Yes Infeed table length: 1.300 mm Table rollers: driven Lubrication pump: automatic Pneumatic top pressure: Yes First infeed roller controlled: Yes Type of feed roller drive: Cardanic Infeed automatically: Transversal loading feeder KALLFASS HMKVH: Yes Lifting spindle: NC-axis CNC-axes: Yes MÖHRINGER Resaw: Yes MÖHRINGER ML: Yes Querpuffer: Yes WEINIG Cross feeder: Yes Automatic destacking: Yes Control: WEINIG POWERCOM PLUS Conformity marking: CE mark Total connection: 445 kW

Condition: good (used), Year of construction: 1985, Carriage length approx. 2800 mm Motor 5.5 or 7.5 KW Hydraulic foot pump Djlq I Eswf Ut Ns N Hout Cutting width 1200 mm Max. saw blade diameter 450 mm Speeds: Scoring cutter

Condition: good (used), Planing width 630 mm Planing height 230 mm Duelowf Ur Eeq I E N Hjt Planing table length approx. 2.20 m Two-knife spindle Motor 6.5 HP Manual table lift Weight approx. 1300 kg No motor brake External dimensions approx. 2300 x 1400 x 1200 mm The data was taken from a brochure and is therefore without guarantee.