Condition: excellent (used), suitable e.g. for ESTERER SS 56, 1,320 mm long x 140 mm wide x 2.2 mm thick, tooth pitch 22 mm, serrated facing 30 x 8 mm for JANSEN-Angel type no. 7 Dkolinelu Dzxj Tlgol

Condition: excellent (used), Year of construction: 2015, operating hours: 16,000 h, Haas Drum Chipper 90kw Machine is ready for immediately use Four infeed rollers Two Knives one anvil, also spare knives and anvils Spare knives holder Djlinjvxutdo Tlgskl 600mm wide shaker infeed

Condition: new, Year of construction: 2025, Al-Ko clean air deduster Dkslin Tlobuvbregsl Exhibition piece (no operating hours yet - new) Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, Panhans band saw BSB 500 upper and lower APA II bandsaw guiding system swivelling table top up to 45 door safety by limit switch wheel diameter 500 mm drive motor 1,5 kW / 2,0 PS motor 400 Volt with motor brake belt speed 1.290 m/min. cutting height max. 320 mm cutting width max. 485 mm blade length max. 4.145 mm table size 500x680 mm Dslinsdq D I Ho Tlgekl table height 890 mm Suction nozzle 2x100mm space requirement: 900x525x1925 mm Weight 220 kg CE-conform, GS-tested ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, crosscut and mitre circular saw with maximum cutting height of 170 mm Deliocnz N Hen Tlgokl solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal readjustable fixed stops lower saw blade protection connectable to suction unit Modell-----Motor-----Drehzahl-----Schnittlaenge ZS 170: 400 V / 2,0 KW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Horizontal mitre range ZS 170 ----- 170 mm----- 45 degrees -90 degrees Modell----- Saegeblatt-----Absaugstutzen-----Gewicht ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories on request: Roller conveyor / length gantries type RO, RL, RLK, RLH and RLHK for machining aluminium and PVC profiles and for wood profile board machining. the modular roller conveyor system can be supplied as: 3 m type RO: infeed roller conveyor with min. 2 support feet 3 m type RLK: roller conveyor length stop with backwards folding stop slide - machine stand - Main switch lockable - Feed roller conveyor Ro-St60 3 meter right side - roller conveyor RLK-ST60 L 3,0 meter measuring length Length stop/roller conveyor heavy version mm - scale at the rear beam, caliper gauge with magnifying glass and stop flap - Saw blade 420 x 3,5 x 40 Z 84 Neg Location: ex stock 54634 Bitburg - free on truck - - immediately available- Location: Ex stock 54634 Bitburg - free on truck - - immediately available-

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Exhibition piece Dkolinecdy Nde Tlgel At an absolute special price Location: From stock Bitburg

Condition: new, Year of construction: 2024, Product detail Crosscut and mitre circular saws Type ZS 200NF Crosscut and mitre circular saw with maximum cutting height of 200mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed Dkolinscnz Rvj Tlgel fast mitre adjustment up to 65° horizontal and 60° vertical readjustable fixed stops lower saw blade protection connectable to suction unit machine mounted on mobile machine base with 1,5 mtr. long roller conveyors left and right side left side with scale and stop slide technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm ( not included in standard ) Suction nozzle 100 mm Weight 490 kg Location: Ex stock 54634 Bitburg - Immediately available - On request we can also offer you the saw blade.

Condition: as good as new (ex-display), Year of construction: 2025, Basically new machine, has run with us at the in-house exhibition ( 3 days ) 5 operating hours Technical data 300-P Suction port: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz Dslin Tlebqachogskl max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Spa collection volume: 3 x 165 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: Ex stock 54634 Bitburg Immediately available subject to prior sale

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS band saw Type BSB 600 Stand in modern steel construction, table top thick-walled, high ribbed cast iron massive grey cast iron band saw frames technology: - upper and lower PANHANS band saw blade guide APA II - finely planed cast iron table - swivelling table top up to 20 - dynamically balanced band saw blades with vulcanized rubber bandages - fence ruler can be used to the left of the saw blade - Fence profile can be folded down - blade tension indicator Dolinebzmb He Tlgskl - mechanical height adjustment by hand wheel with locking pinion - automatic motor brake with main switch and motor protection switch technical data: - max. cutting height 380 mm - max. cutting width 570 mm - table size (BT) 590 x 810 mm - table height 905 mm - wheel-Ø 600 mm - engine power 2,2 kW - wheel speed 820 rpm - max. saw band length 4710 mm - suction nozzle-Ø 2 x 100 mm - machine weight 272 kg - machine size (LBH) 1120 x 750 x 2125 mm Location: ex stock Bitburg Top exhibition price Freely loaded

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 160 P : - Intake port Ø: 160 mm - nominal motor power: 2,2 kW; 400 V/50 Hz - max. volume flow: 2000 m³/h - nominal volume flow: 1448 m³/h - negative pressure: 2503 Pa - filter surface: 9 m² - filter cleaning: Compressed air cleaning - Filling container (roll container): 241 litres - Dimensions ( L x W x H ): 1684 x 830 x 2050 - Weight: 288 kg - execution / operating side alternatively right / left Dslin Tlobpg Itjgekl Location: ex stock 54634 Bitburg Top price for the show piece

Condition: new, Year of construction: 2025, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price Dolijcr S Ecsn Tlgokl

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Djliscnw U Dsn Tlgjkl Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: new, Year of construction: 2025, Feed with uniform speed without loss of strength Metal gearbox with hardened gears Metal cover of the feed rollers Right - and left-hand rotation Powerful motor Durable PU feed rollers Tripod with an extended arm as standard Individual tilt and adjustable for horizontal and vertical use With counter Model VSA 48 L Item No. 5115500 Technical data maximum unloading 1050 mm Dolin Tocnxmzelgskl Number 4 feed rollers Roll diameter 120 mm Roll width 60 mm Travel of the roll 25 mm 8-speed Circulator Speeds 2 / 4 / 5.5 / 6.7 / 11 / 13 / 16,5 / 33 m / min. Motor output 0,75 kW Connection 400 V / 50 Hz Weight 65 kg

Condition: new, Year of construction: 2025, Description: IE 3 motor standard Deliscqy I Sen Tlgokl max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock 54634 Bitburg

Year of construction: 2021, Condition: new, Excellent value for money Mobile in the workshop can be used *. High suction power significantly reduced dust (dust class L) Robust, reliable construction Options: filter cartridge, floor cleaning kit *. From the frame up robust engine, economical in terms of energy consumption, strong in the suction power. The AL-KO raw air dust extractors Mobile family are easy to handle and can be due to their low weight and the integrated castors always there, where you need their suction power. * In the wood and wood products, raw air dust extractors are not approved for use in workplaces in Germany, Austria and Switzerland. * Standard incl. 2 meters hose Dkjliecnz A Ton Tlgol Technical data suction pipe of 160 160 mm motor nominal power 1.5 kW / 3 pH voltage 400 V / 50 Hz Flow rate 2,200 m³ / h vacuum 2,500 PA filter surface 2.2 m 2 chip sample volume 175 liter Dimensions (L x B x H) in mm 1,090 x 580 x 2,098 Weight 40 kg Location: Off the shelf 54634 Bitburg

Year of construction: 1988, Condition: used, machine/vehicle number: 01910/88, Floor grinding machine Eugen Laegler Type: Vibrafor Engine power: 1,1 KW Volt: 220 Grinding surface vibrating Dslinocb Au Sj Tlgekl Dust bag Location: 54634 Bitburg - can be visited

Condition: good (used), Kettenstemmer, chain mortiser Eccentric clamp Chain 50 x 175 mm Port 380 Volt Delsdtri Ujin Tlgekl Location: Off the shelf 54634 Bitburg

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt 5 amps, 50 Hz, Machine no.: 4/14242 Delin Tlsb Auu Rogokl Dust bag Location: Ex warehouse Bitburg

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Delin Tlelht Hwjgokl Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Year of construction: 2008, Condition: excellent (used), Electric heating element Shock- and impact-proof plug-in heating system with heating conductors embedded airtight in silicone.No wear, no corrosion, operational safety even in continuous operation and in case of impacts and shocks. Temperature adjustment via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressing surfaces on all sides. Gold anodized finish as standard, scratch and abrasion resistant, easy to clean. Djlinolcd Szj Tlgokl Size:Type: EST 21 Length: 2100 mm Connected load: 1100 Watt, 230 Volt Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Motorized thicknessing table stroke with two speeds Numerical display for working height Grey cast iron thicknessing table The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Noise and chip protection curtain at workpiece infeed and outfeed as standard Adjustable roller contact pressure Front infeed roller with helical toothing Pull-out roller with rubber coating Powerful industrial engine Equipment details Models TERSA with Tersa planer blade shaft Planer blade change in seconds When the machine is started, the planing knives are automatically clamped by centrifugal force - self-locking The blade projection adjusts automatically without using setting gauges Work table The work table is supported on four large trapezoidal threaded spindles, which ensure maximum stability in all working conditions With electrical table adjustment as standard Due to the special lifting device, the table position is maintained even without locking Helical toothed steel feed rollers for a constant and even wood feed second, rubberized feed roller at the outlet Massive recoil protectors prevent the recoil of workpieces A 4-knife shaft ensures an optimal planing pattern Dimensions and weights Length approx. 1305 mm width/depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter thickness 150 m Dkslieff Efasn Tlgol

Condition: new, Year of construction: 2025, Motorized thickness table hub with two speeds Numerical display for working height Thicknessing table in cast iron The thicknessing table is supported by four large trapezoidal thread spindles for maximum stability and precision Four speeds Optional with two roles in the thicknessing table Equipped with noise and chip protection curtain at the factory Tueckein and outlet Adjustable roll pressure Front feed roller with helical gearing Pull-out roller with rubber coating Powerful industrial motor Equipment details Models TERSA with Tersa Planer knife shaft Planer blades change in seconds Dkolin Tled Hx E Ijgsl When starting the machine, the blades are automatically tensioned - self-arretierend by the centrifugal force The knife protrusion will automatically without the use of setting gauges Work table The working table is supported by four large trapezoidal screw spindles provide greatest stability under all operating conditions As standard with electric table adjustment The Special lifting device correctly maintain the table position, also without lock Helical steel feed rollers for a constant and uniform wood feeding Second, rubber feed roller in the spout Massive arrestors prevent kickback of workpieces A 4-meter shaft ensures an optimal planing image Dimensions and weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Connect dust extraction

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine must have. A solid cast iron sanding unit with a powerful powerful motor ensures maximum sanding performance. The working table, adjustable in height by spring pressure, allows optimum belt utilization and safe working. Belt oscillation, infinitely variable unit swiveling, and veneer unit, a veneer sanding device and an additional table for and an additional table for sanding work on the on the deflection roller. The machine is supplied with an assortment of sanding belts; an angle and miter fence is also included. Technical data: Dkjlsd R Ev Doin Tlgsl - Motor power: 2.2 kW - sanding belt size: 150 × 2280 mm - grinding belt speed: 22 m/sec. - table size: 750 × 350 mm - space requirement: 1000 × 800 mm - weight: from 180 kg - Suction Ø: 100 mm Location: Ex warehouse 54634 Bitburg - free loading - Can be shipped for a fee

Condition: as good as new (ex-display), Year of construction: 2025, Planer Thicknesser with TERSA Planer blade quick change system. With TERSA quick-change system for fast planing blade replacement TERSA Planer blade system allows for especially quiet running Diagonally serrated steel feed roller for constant and uniform material feed Robust dressing tables made of ribbed grey cast iron, milled and stress-free, this resistant and durable plan Large, pivoting dressing stop for precise alignment, 90 ° / 45 °, with quick clamping Back opening dressing table Powerful motor Robust steel / cast iron construction Milling can be retrofitted Equipment details TERSA Planer knife shaft No adjust and screw more Planer blades change in seconds Self arretierend Particularly low noise Perfect plane results Surface Planer Fitted as standard with the TERSA Planer blade quick change system Large dressing tables The dressing and fixed width tables made of grey greeting guarantee highest quietness and vibration-free. Thickness Planer With the powerful thickness feed, workpieces can be planed up to 200 mm height. The helical feed roller guarantees the constant feeding. The conversion of Abrichtzu thickness Planer is in seconds with one hand. Drive Stable-focused chain drive Steel drive wheels Dkjlinedqy Uqo Tlgsl Massive cast iron pillow block Planing mill Massive arrestors prevent kickback of workpiece

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Delinjdqzhhe Tlgjkl Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg