Condition: new, Year of construction: 2025, Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding carriage made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces. The large dimensioned sawing unit made of grey cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground grey cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminium sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminium telescopic stop Angle adjustable With two professional folding fences Dkoljcnxamjq E Ekael Rip fence Standard with fine adjustment and quick clamping Scope of delivery: Table extension Table extension Anodized aluminium sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm working length 1660 mm Cutting height max. 90° with scoring 100

Condition: new, Year of construction: 2025, " Products " Woodworking " Holzkraft " Sizing circular saws Series SC 3 classic - Small format circular saws Cutting plane directly on the roller table Precision-guided sliding table made of aluminium, anodized as standard Large table arm guided on telescopic arm and longitudinally adjustable Dolq E Ekjcnxaqsaekl Extendable aluminium telescopic stop, angle adjustable with professional stop flaps Rip fence with quick clamping and fine adjustment The standard table widening and table extension make it easy to work with larger workpieces. The large dimensioned sawing unit made of grey cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground grey cast iron remains permanently flat Heavy steel cast iron construction Smooth running and precise cuts Equipped with powerful three-phase motor Maximum cutting height is achieved even with pre-scoring device installed (pre-scoring device optional) Scope of delivery: Table extension and table extension Anodized aluminium sliding carriage Aluminium folding fence Rip fence with round bar guide and fine adjustment Model SC 3 classic 26 Article-No. 5504326 Technical data table dimensions 840 x 560 mm table height 900 mm working space 2600 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 82 mm max. clearance width left of saw blade 2310 mm Cutting

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Maximum equipment for the professional. Part number 5503431 Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min Delq E Ekslht Htsaekl SCOPE OF DELIVERY Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Djljlht H Esq E Ekaokl Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: excellent (used), Year of construction: 2000, Used Graule crosscut and miter saw Type: ZS 135 Technical data: - Maximum cutting height : 135 mm Dkolqon Aw E Ro E Ekajl - Cutting length : 430 mm - Maximum saw blade diameter : 350 mm - Engine power : 4 HP / 3 KW - Serial number : 2008/2/23 - 400 volt - incl. saw blade Location : Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Rojek sliding table saw swiveling The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standard equipped with aluminum sliding table CV 360T with very precise and fixed mounting on hardened bars. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. Engine power 5,3 kW Motor power of separate scoring unit 0,75 (1)* kW Speed of the saw blade spindle 4400 rpm Max. Cutting height of saw blade 315 (350/ 400) 90°: 102 (120/138) mm 45°: 71 (83/86) mm Max. Saw blade diameter with scoring 315 (350/400) mm Spindle diameter of the saw blade 30 mm saw blade tilting 90° - 45°. Diameter of scoring saw blade 120 mm diameter of scoring saw blade spindle 20 mm scoring spindle speed 8530 rpm (50 Hz) table size 400 x 955 mm Dslq E Ekon D Araoaskl cutting width 800 (500;1050; 1300; 1500) mm Suction pipe diameter P 100 + 40 (80) mm Noise level with technology LpAeq 92,9 dB Net weight approx. 500 kg Sliding table CV360 size of aluminum sliding table 2500 x 360 mm Cutting length 2500 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table Dkelq E Eehp Rdlskael High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Djljhqadcsq E Ekaskl Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Condition: as good as new (ex-display), Year of construction: 2025, Al-Ko clean air deduster Exhibit Sold at a special price Technical data Power Unit 250 P Intake manifold: 250 mm Nominal motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Dkolq E Escdr Enekajl Negative pressure: 2451 Pa Filter area: 22,4 m² Spa collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Slat carcass press from our showroom; Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Delqsb Eln Do E Ekajkl Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Holzkraft band saw HBS 533 S. Heavy professional design with high dead weight for maximum running smoothness especially smooth and precise running thanks to torsion-free machine housing large dimensioned cast iron saw table in one piece, tiltable from 0° to +20° with ground and polished surface patented table tilting device with hand wheel and toothed rack saw band quick clamping ceramic saw band roller guide large cast iron parallel fence fast and precise cutting height adjustment via handwheel and toothed rack with millimetre scale safety switch for automatic shut-off when opening the door large cast iron parallel fence Dkslqjb S Uzkj E Ekajl standard with angle stop flywheels made of grey cast iron with special coating on the running surfaces Inspection window for checking the saw blade running Professional saw table guide the heavy, massive saw table made of grey table is easily and comfortably adjusted by a handwheel rack and pinion guide system the inclination is steplessly adjustable from 0° to +20°. Patented working table dimensions 750 x 530 mm cutting speed 1400 m/min. flywheel Ø 530 mm max. cutting height 350 mm max. cutting width with fence 465 mm max. cutting width without fence 510 mm band saw blade length 4190 mm precision guide top / bottom saw table inclination 0° - +45° motor power 400 V/50 Hz/P2 4,0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Suction port diameter 2 x 100 mm Location: ex stock Bitburg

Condition: new, Year of construction: 2024, Chopper Knife 40 x 40 concave Knife for Weima, Large ..... For almost all common chippers / shredders From stock Bitburg Djlqsbxu Dhs E Ekajkl Subject to prior sale

Condition: new, Year of construction: 2024, The Uniq series is the full-fledged basis of our range and shares all the features that have helped the Kündig edge sanding machine gain its reputation on the market as a robust, versatile precision instrument. Part of its extremely solid construction is the motorized oscillating sanding unit, which offers a maximum oscillation travel of 90mm and the possibility of motorized tilting by up to 45°. All the usual edge processing operations can be carried out at the up to four grinding stations. Dkslq Esfig Rwe Ekael Edge sanding machine Kündig Uniq front and rear side Ingenious design - the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a whole range of intelligent functions and features. For example, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation travel, sanding belts can be used optimally over their entire width, without the need for laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The sanding unit can also be tilted conveniently by means of a rotary switch and also with the aid of a separate motor. The unit can be tilted between 90° and 45°. Thanks to the sophisticated swivel mechanism

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Dkslq E Ekehk S Szeajl Weight approx. 60 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, minimax si 400es 32 M A 3 UP In heavy professional version with scoring unit and format sliding carriage made of anodized aluminum Art:No. 5504765 Dimensions and weights Length approx. 3710 mm Height approx. 1717 mm weight approx. 745 kg Connection suction Suction port diameter 120 mm Suction port diameter saw blade guard 80 mm Electrical data Power scoring motor 0,55 kW Power drive motor 7,0 kW Supply voltage 400 V Mains frequency 50 Hz Circular saw unit Cutting width with rip fence 1270 mm Max. Trimming width left of saw blade 3260 mm Trimming length 3200 mm Saw blade inclination 90 45 °. Max. Cutting height 90° 136,5 mm Max. Cutting height 45° 97 mm Explanation Max. cutting height Independent of scoring device Diameter saw blade 400 mm Explanation Diameter of saw blade Independent of scoring unit Saw blade speed 3500/5000 min¯¹ Sliding carriage and table Length of sliding table 3200 mm Width of sliding table 360 mm Height of sliding table 142 mm table length 940 mm table width 560 mm table height 900 mm Scoring unit diameter saw blade 120 mm Saw blade speed 9200 min¯¹ Dkelq Ejhk S S Ne Ekasl Scoring unit equipped with its own drive and easily adjustable from the outside Smooth-running and precise format sliding carriage made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guideways Large table extension (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic cross-cut fence with two folding stops Precise rip fence, foldable for large panels, with quick clamping and integrated fine adjustment Table widening, table extension and eccentric clamp as standard equipment Sawing unit made of a robust cast iron ring with permanently precise dual pivoting segment guide and zero-point pivoting for a smooth and perfect cut, 6-year Holzkraft warranty on wear of the pivoting segments Large-surface work table made of stress-free gray cast iron High dead weight ensures precision and smooth running Equipped with powerful three-phase motor Version M: Height adjustment and tilting of the saw unit electrically, digital display for tilting Version A: On/off switch on the sliding carriage Version M A 3: Programmed control of the saw blade height and tilt and the position of the rip fence, stepless positioning of the rip fence via switch or automatic positioning system, position display via encoder, adjustment via ball screw, incremental adjustment possibility UP version: swivelling control panel at eye level Made in Italy Scope of delivery: Anodized aluminum format sliding carriage Material roller at the extension arm Saw parallel fence with round bar guide Table extension Table extension Folding stops Trimming shoe Eccentric clamp Handle for sliding carriage Saw blade pendulum protection Motorized height adjustment and tilting of the saw unit digital display for swiveling integrated on/off switch of the motors in the edger carriage READY3" version (3 axes) Swiveling control panel at eye level Location: Ex stock 54634 Bitburg Immediately available - Storage machine -

Condition: excellent (used), Year of construction: 1987, Elektra Beckum used wood band saw BAS 315/5 WN55 Year of manufacture: 1987 Serial No.: 2106584 Saw blade length: 2240mm Voltage: 230 volts Cutting depth: 170mm Parallel stop Base frame Location: from stock 54634 Bitburg Dkslq Esvkyd So Ekael - immediately available -

Condition: new, Year of construction: 2024, Osama automatic 4-roller glue application machine Type: S4R/P-1400 working width: 1.400 mm max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 890 mm Diameter of the application rollers: 250 mm Motor power: 3 KW Electrical system: 400 V/ 50 Hz/ 3 phases Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF) and polyurethane adhesives for various types of materials such as MDF, multilayer, chipboard, composites, plasterboard. With this type of gluing machine we can dose the amount of glue precisely and homogeneously, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavyweight structure and the core of the rollers, made with higher thicknesses compared to previous models, allow a high production rate without particular problems and the gluing of materials up to 2200 mm wide. Removing the rollers for maintenance is a simple operation as the supports can be split into two halves using a simple bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as the electronic speed controller, the automatic roller washing device and the automatic lifting device of the upper roller with position indicator on the display. The S4R/P gluing machine is used for various types of production, including in the construction sector and in the manufacture of foam boards and mattresses. Equipment: - Automatic roller cleaning - Motorized infeed roller Dolq Eeu I R Utj Ekaokl - Motorized outfeed roller - Infeed table TRF 1400 x 3000 mm PVC rollers 60 mm spacing: 200 mm - Outfeed table TDF 1400 x 3000 mm. Disk rollers D: 122 mm stainless steel - Chassis for S4R/P-1400 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1996, Griggio universal edge sanding machine with oscillating sanding belt Type: GL 150 Oscillation: yes Solid sanding device: yes Funnel sanding device: yes Inclinable Motor power: 1.8 kW Suction nozzle Table size: 1440 x 220 mm Belt length: 2200 x 150 mm Weight: 530 kg Sanding sleeve device Feed 3 rollers Dkjlot U Rvvjq E Ekaol CE marking Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Djljr Eli Toq E Ekaekl Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Second-hand wood lathe, Killinger KM 1000 S - Very good condition - Motor 0.75 kW / 230 V Center width 1000 mm and center height above the bench bed 200 mm Accessories: Dkelq E Ekjr Eltceasl - Center punch - Turning iron (see photos) - steady rest - face plate - Tailstock - Hand rest - 8 speeds Location: From stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Panhans BSB 800 band sawing machine TECHNICAL DESCRIPTION Solid German machine construction Machine stand in shapely modern design torsion-free double-chamber welded steel construction Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA 2, size 2 Finely planed gray cast iron table Swivel table top up to 45 Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Fence profile can be reversed Blade tension indicator 1 piece saw blade5775 x 30 x 0.8 mm, tooth width9 mm, No. 3780.301 Mechanical height adjustment of the saw blade guard by hand wheel with locking pinion Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS tested Left-hand machine stand Rotary cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Belt speed 1800 m/min Dkelqsr Igzcj E Ekajl Cutting height 520 mm Cutting width 780 mm Blade length max. 5775 mm Saw blade width min. /max. 15 mm /4 0m m Optional with special coating Saw blade width min. max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930m m Suction nozzle 2 x 0 120 mm, Motor power 4 kW / 5.5P S Voltage 400 V / 50 Hz Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1990, Slot drilling machine SAC with dowel grid Type: LB 85 Year of construction: 1990 Table length 500 mm Table width 300 mm Longitudinal run of the drill chuck 140 mm Cross run of the drill chuck 120 mm Drill chuck 1 - 20 mm Motor revolutions 2900 rpm Motor power 1.4 kW with 1 clamping cylinder for holding the workpiece Dkolq E Eor Ig A Nokael Dowel drilling device Dowel grid with pitch 16, 22, 25, 32 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Djlqer Ig H Te E Ekajkl Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Dkolq E Eevk Sd Dokael Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 610 * 431 mm Cutting speed: 900/450 m/min Flywheel diameter: 430 mm Max. cutting height: 270 mm Max. cutting width with stop: 370 mm without stop: 410 mm Saw band length: 3345 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 1550 watts/400 volts Weight: 130 kg Dimensions in mm: 680*512*2048 Extraction nozzle diameter: 2*100 mm Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 Delq E Ekohkzt Nsajkl - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock subject to prior sale