Condition: used, Used machine Condition: completely workshop checked Equipment and technical data: Motor: 5.5 kW Spindle diameter: 30 mm 2900-4400-6000-7800-10000 rpm Height and swivel adjustment: electromotive Fine adjustment: by handwheel Availability: by arrangement Location: Flörsheim Dob E Dsl A A Dms Rhaout

Condition: new, The convenient Varioflex shelf trolley is designed for the flexible and gentle depositing of painted workpieces. workpieces. In addition, its its 4 swivel castors also allow the transport of workpieces. Its stable tubular frame construction can be adjusted from 200 to 2000 mm. With its 17 inner and outer support tubes each side, the trolley can support weights of up to 400 kg with an with an evenly distributed load. The pluggable inner and outer support tubes can be removed and can be removed and reinserted at the rear. can be reinserted at the rear. When not in use, the rack trolley can be folded to save space. space-saving. Optional accessories Djb Eontcu Do D Rhaout - Plastic-coated support tubes - Additional rake Technical data: Length: 200 - 2000 mm Depth: 870 - 1180 mm height: 1855 mm support tube length: 650 mm - extended up to: 1150 mm Clearance between tubes: 70 mm load capacity: 400 kg Picture shows optional accessories (additional rake)

Condition: new, Year of construction: 2022, New machine Year of construction: 2022 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue tray with discharge function optional), HF cross-cut saw station, HF trimming unit, corner copying unit, chain feed, double roller top pressure, pull-out workpiece support rail, signal lamp for workpiece sequence and integrated line control for contactless control of processing functions. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths of 0.4 3.0 / 6.0 mm and workpiece heights of 8 60 mm. Feed speed: 10.0 m / min.; 8.0 m / min. with corner copying 3 free spaces for finishing units 10 color touch screens Machine length 4030 mm Workpiece thickness 8 - 60 mm Workpiece width min. approx. 75 mm Dob E D Rhoqfad Ajaout Workpiece length min. approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness 0.4-3.0 mm Chip removal joining unit 0 -2.0 mm stepless Total connection 7.5 kW - 400 V Feed speed 10 m/min; 8 m/min. Pneumatic connection 6 bar Net weight 1050 kg Options: Surcharge for radius scraper unit with blow-off device + suction unit Surcharge for flat scraper unit + suction unit Surcharge for buffing unit EVA/PUR glue pot with discharge function Surcharge for diamond tools Height=65mm for joining unit Riepe spraying device (anti-stick) on the joining unit Riepe spraying device (cleaning spray in front of buffing unit) Pipe system with 90° bend + manual slide mounted on machine with D=200mm Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2022, New machine Year of construction 2022 large radial circular saw for cutting to length and trimming floorboards quick changeover between double miter cuts or cutting to length robust cast iron swivel arm with interchangeable hexagonal guides saw arm can be swiveled 45° on both sides Cutting height 90° max 640x20/610x60 mm Cutting height 45° max 380 x 100 mm Cutting height -45° max 330 x 100 mm Cutting depth with motor 0°/45° 100/50 mm Diameter of saw blade/bore 350/30 mm Saw blade speed 2800 rpm Table (LxW) 1675x1060 mm Motor 3 KW/400 V Weight 220 kg Duob E D Req Ilxwohast Availability: short term Storage location: Hochheim

Condition: used, Used order picking trolley with 25 compartments, clearance between the bars approx. 30 mm; bars can be removed individually can be swiveled away for larger workpieces Debjtpdp Re E D Rhasut Support surface 1390 x 580 mm W x L x H 1500 x 630 x 1230 mm mobile, with brakes Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2002, Used machine Year of construction 2002 Djb Eeuh H R Uo D Rhasut table size 580 x 280 mm Drilling table height 800 mm Drilling depth 150 mm Drilling length 225 mm with Wescott drill chuck 0-20 mm height adjustment 120 mm Swivel range drilling unit 2 x 45 ° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in handwheel with digital display with 2 speeds 1400 and 2800 rpm with drive unit LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2003, Used machine Year of construction 2003 automatic height and swivel adjustment of the spindle with decimal pulses Mechanical display of spindle height and electrical display of swivel adjustment Hinged cover with aluminum guides adjustable opening of the table top via table slide System for quick tool changes with long tables with extendable workpiece support Table size 2500 x 780 mm Spindle adjustment - 45° to + 45 ° Spindle diameter 30 mm Spindle stroke 230 mm max. table opening 300 mm motor 5.5 kW with automatic star-delta start with right-left rotation speeds 3000/4500/6000/8000/10000 rpm Djb E D Rjuzn I Djhaeut Electronic programming of spindle height, spindle swivel and stop position (milling stop) Extraction top+bottom 120 mm Dimensions 2570 x 1450 x mm Weight approx. 670 kg Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2022, New machine Duobokwhkyj E D Rhaot Year of construction 2022 Save working time thanks to retrievable tools; once set up, the drive unit can be to the preset position again and again with a single movement Mobile and flexible use; chamfering, grooving, flush milling Supplement to the table and CNC router Table size 520 x 430 mm with fine adjustment # 10450 Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Factory overhauled by Lange Maschinenbau Minimum workpiece width approx. 75 mm Minimum workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tool height = 55 mm Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Cross-cutting unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Corner rounding unit Surface scraper unit Suction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Availability: Short term Dsb Eolfikij D Rhaeut Location: Hochheim

Condition: used, Year of construction: 2015, Used machine Year of construction: 2015 Condition: Factory overhauled technical data: Workpiece thickness 8 - 50 mm Workpiece width min. approx. 75 mm Edge thickness 0.4 - 3.0 mm Single feed solid edge up to 5 mm Chip removal Joining unit 0 - 2 mm stepless Electrical connection 400 V, 50 Hz Total connection 7.5 kW Feed speed 5.5 - 8 m/min. Pneumatic connection 6 bar Net weight 850 kg Equipment: Joint milling unit with 2 motors and 45 mm high milling heads instead of 30 mm PUR/EVA outlet basin printing unit cross-cut saw Combination trimming unit Dusb Eskwhbbe D Rhaet Corner copying unit Radius scraper Surface scraper Location: Hochheim Availability: Short term

Condition: used, Year of construction: 2010, Used machine Deb E Djunczwj Rhajut Year of construction 2010 Technical data: - Voltage: 230 V 50/60 Hz, 120 V 60 Hz - Power: 765 W - Max. Edge height: 45 mm - Edge thickness: 0.4-3 mm - Digital stepless temperature setting: 120-200 °C - Feed speed: 0.5-4.0 m/min - Glue basin capacity: 150 cm³ - Warm-up time: 10 min - Weight: approx. 4 kg - Including table frame - with accessories Availability: short term Location: Hochheim

Condition: used, Year of construction: 1962, Used machine Used table milling machine of the company Bäuerle type SFM Year of construction: 1962 MNo.: 623596 Engine power: 3/4 HP 3 roll feed unit without milling tools due to the missing motor brake, the machine can only be sold as a spare parts carrier Availability: short term Location: Hochheim Hochheim Deb E D Remkpzlohasut

Condition: new, Year of construction: 2023, New machine Year of construction: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue tray with discharge function optional), HF cross-cut saw station, HF trimming unit, corner copying unit, chain feed, double roller top pressure, pull-out workpiece support rail, signal lamp for workpiece sequence and integrated line control for contactless control of processing functions. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths of 0.4 3.0 / 6.0 mm and workpiece heights of 8 60 mm. Feed speed: 10.0 m / min.; 8.0 m / min. with corner copying 3 free spaces for finishing units 10 color touch screens Machine length 4030 mm Workpiece thickness 8 - 60 mm Workpiece width min. approx. 75 mm Workpiece length min. approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness 0.4-3.0 mm Chip removal joining unit 0 -2.0 mm stepless Total connection 7.5 kW - 400 V Feed speed 10 m/min; 8 m/min. Pneumatic connection 6 bar Net weight 1050 kg Options: Surcharge for radius scraper unit with blow-off device + suction unit Surcharge for flat scraper unit + suction unit Surcharge for buffing unit EVA/PUR glue pot with discharge function Surcharge for diamond tools Height=65mm for joining unit Riepe spraying device (anti-stick) on the joining unit Riepe spraying device (cleaning spray in front of buffing unit) Pipe system with 90° bend + manual slide mounted on machine with D=200mm Availability: short term Storage location: Hochheim Dueb E D Rhjqfad Hsaot

Condition: used, Year of construction: 2006, Used machine Year of construction 2006 completely overhauled with new glue application system Equipment: - Manually adjustable infeed guide - Trimming unit 1961 - Edge feeder 1903 - Glue application station 1906 with touch-sensitive nozzle - Pneumatic printing unit 1816 - Snipping unit 1822 - Trimming unit 1942 M radius, chamfer, flush - Blowing nozzle complete - Scraper unit 1929 - Chip catcher box Dueb Eskwg Sle D Rhaet - Surface scraper 1964 - Extraction hood set -- Complete protective hoods Technical data: Total length: 5291 mm Workpiece thickness: min. 6 / max. 50 mm Edge band thickness depending on assembly: 0.4-5 mm Max. edge band height: 55 mm Edge band length strips: min. 350 mm Edge band protrusion/height per side: max. 3 mm Workpiece width: min. 60 mm Workpiece length: min. 180 mm Feed speed: 12.5 m/min. Extraction: Joint trimming unit: 900 m³/h Milling unit: 280 m³/h Scraper unit: 280 m³/h Static negative pressure: Joint trimming unit: 1490 Pa Milling unit: 1650 Pa Min. air speed: 20 m /sec. Milling unit connection diameter: 70 mm Scraper connection diameter: 70 mm Compressed air: 6 bar Availability: approx. 2-3 weeks after receipt of order Location: Hochheim Hochheim

Condition: new, Year of construction: 2023, New machine Dob Eoqw D T As D Rhaout Year of construction 2023 Technical data: Working width: 630 mm 4-blade planing shaft TERSA system, d=120mm: 4,800 rpm max. chip removal planer according to CE: 8 mm min./max. thickness passage: 3/310 mm min. Workpiece length: 250 mm Feed speed: stepped 6 - 20 m/min. Motor 380 Volt / 50 Hz: 7.5 kW Noise level according to EN 27960: 86 - 90 dB(A) Basic equipment: Thicknessing table adjustment via 4 trapezoidal threaded spindles Electromotive thicknessing table lift with electronic positioning device positioning device (input of planing height via keypad with electronic display) electronic display) Electrics according to CE magnetic brake circuit breaker Emergency stop switch Safety switch Planing shaft cover Thicknessing table extension 600 mm Suction nozzle d=150mm Availability: short term Storage location: Hochheim

Year of construction: 2023, Condition: new, New refrigeration dryer Year of construction 2023 User-friendly operating concept Efficient design for cost-effective and safe operation Cooling fan speed-controlled from 0 - 100%, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wearing parts while maintaining a constant pressure dew point Controller displays five different alarm statuses and stores them in memory Refrigeration compressor switches off below 15° ambient temperature if no compressed air is flowing through Clear arrangement and easy access to all components requiring maintenance With built-in automatic condensate drain The advantages at a glance High efficiency Outstanding price-performance ratio No unnecessary compressed air losses thanks to integrated electronic condensate drain Connected tools and machines are optimally protected User-friendly operating concept TECHNICAL DATAGeneral information Air volume flow l/min900l/minAir volume flow m³/h54m³/hMaximum pressure16barAir connection½"Power consumption0.18kW Dueb E Deq Hh Efs Rhajt Dimensions and weights Length (product) approx.325mmWidth/depth (product) approx.430mmHeight (product) approx.445mmWeight (net) approx.24kg Availability: short term Storage location. Hochheim

Condition: used, Year of construction: 1997, Used machine Year of construction 1997 Equipment and technical data: max. edge thickness 3 mm max. workpiece height approx. 50 mm min. Workpiece length approx. 300 mm min. Workpiece width 70 mm Feed speed approx. 10 m/min Dob E Der H Rlgo Rhajut Ready for operation approx. 6 min. Power consumption 7 kW Rapid heating adhesive container High-frequency cross-cut saw High-frequency flush trimmer (with combined interchangeable plate cutter for radius, straight and chamfer trimming) Extraction nozzle 100 mm Dimensions: 330x140x130 cm Weight 550 kg Availability: short term Location: Flörsheim

Year of construction: 2023, Condition: new, New refrigeration dryer Dusb Eetpdp Ae D Rhaet DESCRIPTION BAFA eligible (as of 06/2023) User-friendly operating concept Efficient design for cost-effective and safe operation Cooling fan speed-controlled from 0 - 100%, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wearing parts while maintaining a constant pressure dew point Controller displays five different alarm statuses and stores them in memory Refrigeration compressor switches off below 15° ambient temperature if no compressed air is flowing through Clear arrangement and easy access to all components requiring maintenance With built-in automatic condensate drain The advantages at a glance High efficiency Outstanding price-performance ratio No unnecessary compressed air losses thanks to integrated electronic condensate drain Connected tools and machines are optimally protected User-friendly operating concept TECHNICAL DATA General information Air flow rate l/min 1800 l/min Air volume flow m³/h 108 m³/h Maximum pressure 16 bar Air connection ½" Power consumption 0.2 kW Dimensions and weights Length (product) approx. 325mm Width/depth (product) approx. 430mm Height (product) approx. 445mm Weight (net) approx. 24 kg Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2022, Fan new, year of construction 2022 Motor power 15 kW Dsb E D Rhetpdp Ujasut Volume flow 7783 m³/h Fan position GL 270 Total pressure increase 3502 Pa Connection 350 mm Weight 328 kg Availability: immediately Storage location: Hochheim

Condition: used, Year of construction: 1983, Double mitre saw Year of construction 1983 for dimensionally accurate cutting of small cross sections of wood, plastic and aluminum e.g. for galley rails, picture frames, edgings etc. both saw units are infinitely adjustable for 90° to 45° cuts the length is set by hand according to the scale or, in the case of pre-cut lengths by scanning with a special pair of slotted fences, which are removed from the cutting area during sawing (optional) Cutting length max. 2200 mm min. 240 m Pneumatic saw feed with oil brake cylinder, infinitely variable Clamping device from the front and/or from above, pneumatically operated, from above up to max. 50 mm workpiece height Pneumatic control Safety two-hand control, individual switching for each saw unit Compressed air connection 6-7 bar Air consumption/working clearance 3-4.5 NL Connection for suction 50 mm Dsb E D Rhjt Haf Deaeut Saw blade drive 2 x 1.1 kW three-phase motors 2800 rpm Dimensions 2940 x 1100 x 1220 mm Weight approx. 360 kg Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1987, Used machine Year of construction: 1987 Machine workshop checked Table size 1100 x 760 mm motor 4,7/5,7 kW pole-changing with clockwise/anticlockwise rotation Milling arbor MK 5/ 30 mm Height and swivel adjustment via handwheel Speeds 3000/4500/6000/9000 rpm Swivel range of the milling arbor - 5 to + 45 ° Dujb E D Ret Hagzehast Milling stop with metal jaws Mounted on round insert plate and can therefore be rotated through 360 with table extension on both sides with extendable frame support with 4-roller feed unit Weight approx. 900 kg Pictures show machine in not yet overhauled condition Availability: approx. 4 weeks after order placement Storage location: Flörsheim

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Debeudqfzs E D Rhaout Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Deb E D Rhjudqkdsaout Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: new, Universal plate transport helper Ideal, space-saving aid for edge banders, sliding table saws and all other processing machines where the workpiece is moved. Height-adjustable panel transport helper Working height continuously adjustable from approx. 900 mm to approx. 1,200 mm Special polygonal body with anti-slip coating for optimum grip in any position 5 solid swivel castors with high-quality lock for stable stand Moves independently on edge banding machines and sliding table saws Weight: approx. 8 kg Availability: ex stock Djb E D Rhon Uzcpeaeut Storage location: Hochheim

Condition: used, Year of construction: 1997, Used machine Year of construction 1997 Universal dowel drilling machine with drilling from below heavy cast iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any miter angle Drilling unit with digital positioning for 0-edge transfer, touch stops are used which transfer the tool thickness to the vertical bore during horizontal drilling to the vertical bore for hole line drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal passage max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles pitch 32 mm Spindle distance min. 32 mm Spindle distance max. 640 mm Space requirement L X W x H 960 x 630 x1140 mm Deb E Deudqk Re Rhaeut Weight approx. 300 kg Availability: short term Storage location: Flörsheim