Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Position 2: Double Edgebanders BIESSE - RBO-STREAM SB2 9.5 Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 4: Double Edgebanders BIESSE - RBO-STREAM SB2 9.5 Dolsuvfcmjn Uw Hdeut Position 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5

Condition: used, No. 3204 Logyard / Debarker HEWA Used, can be inspected in operation The plant must be dismantled and collected in week 29 (14.06. - 20.06.2025) - Cross feed, separation Electrics and motors renewed in 2016 - Log infeed, 40 m long Frequency controlled motors for smooth start and stop Chain approx. 3 years old Doln Uw Hsv Eyt Aodsut - Root reduction and debarking HEWA Cutter 1000 mm long Automatic butt reduction Mnual debarking - Measurement of log diameter and length - Vibrating chute and conveyor belts for waste disposal Mainly hardwoods, e.g. beech up to approx. 7000 mm in diameter, are processed here Sale on behalf of the customer, from location near 75173 Pforzheim, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: ‘purchased as viewed’ Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 1996, Crosscut and Miter Saw GRAULE Type ZS 200 Year of Manufacture: 1996 400 volt three-phase brake motor, 5.0 kW Saw blade diameter: 520 mm, bore: 50 mm Cutting height: 200 mm Cutting length: 420 mm Machine stand Hydraulic feed brake Pneumatic saw blade spray system Delnewc Tgvo Uw Hdjut Saw blade: 520 x 4.4 x 50 mm, 60 teeth

Year of construction: 2025, Condition: new, machine/vehicle number: 1533, Work surface 3500 x 1500 mm (Inner frame dimensions approx. 3400 x 1400 mm) Folding table with 12 mm tabletop for space-saving installation Becker vacuum pump with 1.25 kW motor, 400 V, 50 Hz Vacuum pump flow rate 40 m³/h Tank capacity 100 l Natural rubber membrane with 700% stretchability Max. component height approx. 600 mm External dimensions approx. 3600 x 1650 x 1000 mm Including chassis with 4 swivel casters Weight approx. 440 kg Duslsd Rzl Uon Uw Hdjt without transport, ex warehouse Seevetal, Subject to prior sale

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 4892/1-902, saw blade diameter: 250 mm, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, cutting depth: 55 mm, input voltage: 400 V, saw blade bore: 30 mm, For sale is a Holzher Sector 1255 Pro vertical panel saw. It features automatic pneumatic locking and digital stops. It has the usual signs of wear but functions perfectly. The machine has been disassembled and is ready for shipping. Dolswhaqljn Uw Hdout

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, cutting length (max.): 3,300 mm, cutting width (max.): 1,350 mm, cutting width at rip fence: 1,350 mm, cutting height (max.): 170 mm, saw blade diameter: 500 mm, table length: 3,300 mm, total length: 3,300 mm, main saw diameter: 500 mm, height adjustment type: hydraulic, overall weight: 1,300 kg, extraction nozzle diameter: 125 mm, type of motor: three-phase motor, slide length: 3,300 mm, table width: 1,350 mm, type of input current: three-phase, power: 5.5 kW (7.48 HP), Equipment: scorer, Martin T72A sliding table saw, in very good condition, from a one-man operation. Fully equipped. Hydraulic lifting and tilting with digital displays. Width stop adjustable with handwheel up to 1350 mm, foldable. Crosscut stop up to 3500 mm with digital displays. Aluminum cross-cut table angle adjustment with digital displays, continuously adjustable from -45 to +45 degrees. Additional second support table for hanging. Front table support foldable. Counter-angle stop on the crosscut guide up to 180 degrees. Sliding table length 3300 mm. Saw blade up to 500 mm. Cutting height 170 mm. Scoring device adjustable from the outside, continuously adjustable. Various saw blades. Forklift available. Can be viewed while still in operation. Price €8,200 plus VAT. Duolnewg Tn Io Uw Hdot

Condition: ready for operation (used), Year of construction: 1999, Functionality: limited functionality, machine/vehicle number: 2092, travel distance X-axis: 36,000 mm, travel distance Y-axis: 5,800 mm, travel distance Z-axis: 1,250 mm, feed length X-axis: 36,000 mm, feed length Y-axis: 5,800 mm, feed length Z-axis: 1,250 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, controller model: NUM 1060 W, workpiece length (max.): 34,000 mm, workpiece width (max.): 4,500 mm, workpiece height (max.): 240 mm, workpiece weight (max.): 25,000 kg, total height: 4,825 mm, total length: 43,700 mm, total width: 11,855 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 33,000 W, spindle nose: HSK 100F, number of spindles: 1, number of slots in tool magazine: 18, tool length: 400 mm, tool diameter: 750 mm, tool weight: 20,000 g, Equipment: rotational speed infinitely variable, CNC large joinery portal (manufacturer CMS, type "NC-PMC36-TUCU", year of manufacture 1999) for the processing of large-format solid wood components (glulam and CLT) for sale. The joinery gantry can be used for simultaneous 5-axis processing of large-format timber components up to 34.0 m long and 4.5 m wide. Among other things, this system was used to process the roof girders for the Expo roof in Hanover. The system consists of a massive movable bridge that is moved via guide rails at a maximum speed of 50 m/minute. The processing spindle is mounted on a carriage that enables movement in the Y and Z directions. A fourth axis allows the unit to rotate on the vertical axis, while the fifth axis allows the spindle to be tilted in the vertical plane. Today, the components are positioned on wooden beams in a fixed grid. The components can be machined on three sides using the appropriate sliding wooden blocks. Components with too little weight are fixed with screws during processing. Positioning is carried out using a laser system, which is not included in the scope of delivery. However, new laser systems can be implemented relatively easily. The system is currently controlled via a CAM system from Siemens. The CAM software is not included in the scope of delivery. However, all standard CAM systems can be used by adapting the post-processor. Duslevitzzon Uw Hdst The vacuum system for fixing the components described in the enclosed order confirmation is not included in the scope of delivery. The system is extremely robust and solid and has provided good service for over 25 years. It can be inspected during operation. The guide rails, the bridge, the spindle and the entire mechanical design cannot be more robust and solid, even in new, comparable systems. However, it is recommended that the system be completely overhauled by means of a retrofit in order to comply with current safety regulations. Appropriate specialist companies can be named. The machine is to be handed over in April 2025 and dismantling should ideally be carried out by the buyer. However, only a limited time window is available for this.

Condition: excellent (used), Year of construction: 2014, Working range: X-axis: 3280 mm Y-axis: 1620 mm Z-axis: 245 mm Feed speeds: X-axis: 80 m/min Y-axis: 60 m/min Z-axis: 20 m/min Vector speed: 100 m/min Electro spindle: HSD 5 axes 11 kW with continuous 360° rotation on B and C axes, enabling machining of complex shapes with high precision liquid cooled Drilling head: HSD  20 vertical spindles Deljwhypnsn Uw Hdsut 4 horizontal grooving saw in X-axis grooving saw in Y-axis Working table:  6-piece beam 4 suction cups on 1 beam preparation for uniclamp Tool magazines: 16-position turret magazine Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring a firm clamping of workpieces during machining Software: bSolid

Condition: new, Plate swivel trolley new suitable for Fimal Concept 350 pressure beam sliding table saw complete including 4 swivel castors (2 lockable) Dujlnepyldze Uw Hdst 12 all-side castors and a foldable support table Availability: short term Storage location: Hochheim

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 160 mm, grinding belt length: 1,900 mm, SCM Sandya 10 2-Belt Sander Very good condition from a one-man operation Dusln Uwswg Tple Hdjt Factory overhauled with new carpet 8 years ago Sanding width 1100 mm, sanding height 160 mm Steel roller for calibration Combination unit with rubber roller and shoe for veneer and solid sanding Viewing possible while still in operation. Negotiable price €6,200 plus VAT

Condition: used, Year of construction: 1989, Used machine Year of construction: 1989 Condition: Functionally tested Equipment and technical data: Glue thickness max mm 20 Dsljquyaysn Uw Hdsut Gluing height max mm 51 Roll material thickness max mm 3 Workpiece length min mm 140 Workpiece width min mm 60 Glue system 1906 cartridge Printing unit Trimming unit 1920 Flush trimming up to 20 mm Chamfer trimming Space requirement LxWxH mm 3150x1800x1375 Weight approx. kg 800 Location: Hochheim Availability: Short term

Condition: used, Year of construction: 1980, Used machine Condition: various small defects without chains Equipment and technical data: Stroke left/right: 150 mm, Top/bottom stroke: 150 mm Delnsrh Ntvj Uw Hdeut Motor: 1.5 kW Can be used as a spare parts carrier Availability: short term Location: Flörsheim

Condition: used, Year of construction: 1993, Used machine Year of construction: 1993 Frame dowel and slot drilling machine Two-jaw chuck for tools up to 20 mm shank diameter Motor 1.5 kW Position adjustment for 2 levels, pneumatic (0-100 mm) Drilling depth max. 150 mm Precision raster rail with 12 mm raster with center locking and cross adjustment 320 mm 2 pneumatic safety clamping cylinders Slot drilling device can be lowered with 2 program cams Duslnepa Uzbs Uw Hdst Availability: short term Location: Hochheim Hochheim

Condition: used, Year of construction: 1997, Used machine Year of construction: 1997 Condition: Well maintained/functionally tested Equipment and technical data: Number of drilling spindles: 21 pcs. in 32 mm pitch Drilling direction: Bottom & front Tilt: 0-90 degrees by handwheel Pneumatic material clamps: 3 pcs. Dusln Uwekwhvgj Hdot Passage: Max. 100 mm in height and max. 640 mm in width Motor: 1.5 kW Suction diameter: 120 mm Incl. a variety of stops (see pictures) Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2024, Mobile panel transport trolley - Stacking of panel heights up to 1600 mm, electrically operated - Tilt angle forwards/backwards 100°, electrically operated - Rotation angle of the head joint clockwise/counterclockwise 180° - Rotation angle of the head joint: 360 - Load capacity 120 kg - Panel sizes up to 2100 x 3200 mm - Total height 2090 mm - with 6 powerful suction pads, which can be adjusted in width The Mobilifter ML-120 consists of - a mobile base frame - an electric lifting and tilting system - an automatic vacuum unit - a rivetless, electric control unit - Weight 170 kg Availability: short term Location:Hochheim Dujln Uskwhkrjw Hdst

Condition: used, Year of construction: 1974, Used machine Year of manufacture: 1974 Equipment and technical data: Spindle diameter: 30 mm 6 spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm Machine has no motor brake and can therefore only be sold as a spare part carrier! Availability: short term Duolnjkwhppj Uw Hdjt Location: Flörsheim

Condition: new, New device Payload 300 KG useful stroke 610mm overall height 400mm frame 1200x740 Total height 1.010mm Weight 70 KG 4 sturdy polyamide swivel casters, 2 of them with locking brake The lifting table can be equipped with an appropriate plate itself. Corresponding holes for the to attach a worktop are provided in the frame of the table. sufficiently available. Delon Uzcljn Uw Hdeut Availability: short term Storage location: Hochheim

Condition: used, Used machine Duoln Uoq Hh Ebow Hdst Condition: age-appropriate table size 2600 x 900 mm max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right motor 5,2 kW Shipping dimensions: 4300x1650x1800 mm weight: 620 kg Availability: short term Location: Flörsheim

Condition: used, Year of construction: 1980, Dowel boring machine Year of manufacture 1980 Equipment and technical data: for horizontal and vertical drilling Horizontal position - for frame dowel work or construction drilling Delsq Syzajn Uw Hdjut the side stops are positioned left and right in the mirror image using an adjustment gauge. Vertical position - drilling gear 90° rotatable with adjustable stop positions Drill motor 0.75 kW n = 2800 rpm Drilling gear standard 9 spindles Spindle distance 32 mm Drilling stroke 100 mm with hydraulic linear guide Air consumption per drilling operation 3.5 l Table size 1000 x 600 mm Working height 840 mm Gross weight 200 kg, net weight 130 kg Packaging dimensions 1200 x 1050 x 1700 mm Availability: short term Location: Hochheim Hochheim

Condition: new, Year of construction: 2024, MACHINE SEEKERS ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. ----- New machine Deln Uw Hjrucb Ssdjut Year of manufacture 2024 Equipment and technical data: Basic machine 1057 XL C with Beckhoff touch screen control Extendable workpiece support 600 mm Extension of extendable boom Infeed ruler standard 3 LED lights in the infeed Joining milling unit 2-motor DIA joining milling cutter 70 x 64x 30 mm Z2+2 Link. and clockwise rotation Edge feeder 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Storage slot for 1.4 kg cartridges (4 cartridges) GluJet collection container Printing unit 1912-3 pneumatic Spray device GM 201 after printing unit Capping unit 1918 pneumatic Extraction hoods for Capping unit Combination milling unit FR201 with DIA milling cutters R=2 mm Form milling unit 1832 Shelf program Radius scraper ZK 301 Chip catcher box Surface scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short term Location: Hochheim

Condition: new, Year of construction: 2021, New machine Year of construction: 2021 Equipment and technical data: HOLZKRAFT HBS S - Precision wood band saw in heavy professional design with saw band quick clamping system for the professional user Heavy-duty professional design with high dead weight for maximum running smoothness Smooth and precise running thanks to torsion-free machine housing Large, one-piece cast iron saw table with ground and polished surface The solid saw table is easily and conveniently adjusted via a handwheel rack and pinion guide the inclination is infinitely adjustable from 0° to 45° (patented) Fast and precise cutting height adjustment via handwheel and toothed rack with millimeter scale Large cast parallel fence With angle stop as standard Technical data: Work table dimensions 830 x 600 mm Cutting speeds 1615 m/min Flywheel Ø 630 mm max. cutting height 400 mm max. cutting width with/without fence 570/ 610 mm Saw blade length 4600 mm Precision guide top / bottom Saw table inclination 0 - 45° Duslekwhatjn Uw Hdst Motor power 400 V /50 Hz/P2 3.75 kW Suction nozzle diameter 2 x 120 mm Incl. saw blades: (Uni 4600x10x0.5 mm; Z4) (Uni 4600x20x0.5 mm; Z4) (Uni 4600x25x0.5 mm; Z4) Location: Hochheim Availability: Immediately

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Equipment and technical data: Duoljudqluen Uw Hdot - Wheel diameter: 600 mm - Belt speed: 1550 m/min - Cutting height: 400 mm - Cutting width: 580 mm - Blade length max.: 4735 mm - Saw blade width min. / max.: 15 mm / 30 mm - Optional with special coating Saw blade width min. / max.: 8 mm / 25 mm - Table size: 810 x 590 mm - Table height: 920 mm - Suction nozzle: 2 x Ø 100 mm - Motor power: 2.2 kW / 3 HP - Voltage: 400 V / 50 Hz - Color: RAL 7035 light grey and RAL 5000 violet blue - Net weight: approx. 275 kg TECHNICAL DESCRIPTION - Solid German mechanical engineering - Machine stand in elegant, modern, torsion-free double chamber welded steel construction - Upper and lower door secured by limit switches - Upper and lower precision band saw blade guide APA 2, size 2 - Finely planed cast iron table - Swivel table top up to 45 - Dyn. balanced band saw wheels with vulcanized rubber bandages - Stop guide can be used to the left of the saw blade, stop profile can be folded down - Blade tension indicator - 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, no. 3780.250D - Mechanical height adjustment of the saw blade guard by handwheel with locking pinion - From 2.2 kW - Rotary cam switch with direct start and emergency stop button - From 3.0 kW - Rotary cam switch with star-delta start and emergency stop button - Mechanical motor brake with main switch and motor protection relay - CE-compliant incl. transport pallet incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Hochheim

Condition: used, Used machine For drilling dowels into flat or end faces With roller-bearing drill shaft and conical claw coupling Driven by any hand drill Working width 650 mm With 7 drill shafts Duoln Usuncz Rew Hdjt Pivoting drill beam 0° - 45° - 90° Clamping height 80 mm Minimum drill hole spacing 30 mm Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 1989, Used machine Year of construction 1989 Technical data: Length of the dressing table 2100 mm Diameter of the tool spindle 30 mm Diameter of the planing heads 100 mm Speed of the planing shafts 6000 rpm Working width: 30 - 180mm Working height: 6 - 120mm with optionally available smaller planing head for the left shaft plus narrower feed rollers, a minimum width of 15 mm can be achieved Motor power bottom, left, right: 3.7kW each Motor power top (thicknessing shaft): 5.5kW Feed speed: 6 and 12 m/min Electric height adjustment with 1/10 inching control Incl. planing heads Dueln Uwsu Tyv Io Hdet 160/120/120/140 mm extraction socket Availability: by arrangement Storage location: Flörsheim

Condition: new, Year of construction: 2022, New machine Year of construction 2022 large radial circular saw for cutting to length and trimming floorboards quick changeover between double miter cuts or cutting to length robust cast iron swivel arm with interchangeable hexagonal guides Doln Ujq Ilxwow Hdeut saw arm can be swiveled 45° on both sides Cutting height 90° max 640x20/610x60 mm Cutting height 45° max 380 x 100 mm Cutting height -45° max 330 x 100 mm Cutting depth with motor 0°/45° 100/50 mm Diameter of saw blade/bore 350/30 mm Saw blade speed 2800 rpm Table (LxW) 1675x1060 mm Motor 3 KW/400 V Weight 220 kg Availability: short term Storage location: Hochheim