Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Factory overhauled by Lange Maschinenbau Minimum workpiece width approx. 75 mm Minimum workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tool height = 55 mm Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Fgolq Telfikij Tl Aob Pressure unit Cross-cutting unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Corner rounding unit Surface scraper unit Suction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Availability: Short term Location: Hochheim

Condition: used, Year of construction: 1962, Used machine Used table milling machine of the company Bäuerle type SFM Year of construction: 1962 MNo.: 623596 Engine power: 3/4 HP 3 roll feed unit without milling tools due to the missing motor brake, the machine can only be sold as a spare parts carrier Availability: short term Fjlq Tomkpzlo Tl Aegb Location: Hochheim Hochheim

Condition: used, Year of construction: 1997, Used machine Year of construction 1997 Equipment and technical data: max. edge thickness 3 mm max. workpiece height approx. 50 mm Fgjler H Rlgoq T Tl Asb min. Workpiece length approx. 300 mm min. Workpiece width 70 mm Feed speed approx. 10 m/min Ready for operation approx. 6 min. Power consumption 7 kW Rapid heating adhesive container High-frequency cross-cut saw High-frequency flush trimmer (with combined interchangeable plate cutter for radius, straight and chamfer trimming) Extraction nozzle 100 mm Dimensions: 330x140x130 cm Weight 550 kg Availability: short term Location: Flörsheim

Year of construction: 2023, Condition: new, New refrigeration dryer DESCRIPTION BAFA eligible (as of 06/2023) User-friendly operating concept Efficient design for cost-effective and safe operation Cooling fan speed-controlled from 0 - 100%, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wearing parts while maintaining a constant pressure dew point Controller displays five different alarm statuses and stores them in memory Refrigeration compressor switches off below 15° ambient temperature if no compressed air is flowing through Clear arrangement and easy access to all components requiring maintenance With built-in automatic condensate drain The advantages at a glance High efficiency Outstanding price-performance ratio No unnecessary compressed air losses thanks to integrated electronic condensate drain Connected tools and machines are optimally protected User-friendly operating concept TECHNICAL DATA General information Air flow rate l/min 1800 l/min Air volume flow m³/h 108 m³/h Maximum pressure 16 bar Air connection ½" Power consumption 0.2 kW Dimensions and weights Length (product) approx. 325mm Width/depth (product) approx. 430mm Fslq T Tletpdp As Asgb Height (product) approx. 445mm Weight (net) approx. 24 kg Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2022, Fan new, year of construction 2022 Motor power 15 kW Volume flow 7783 m³/h Fan position GL 270 Fgolotpdp Ujq T Tl Ajb Total pressure increase 3502 Pa Connection 350 mm Weight 328 kg Availability: immediately Storage location: Hochheim

Condition: used, Year of construction: 1983, Double mitre saw Year of construction 1983 for dimensionally accurate cutting of small cross sections of wood, plastic and aluminum e.g. for galley rails, picture frames, edgings etc. both saw units are infinitely adjustable for 90° to 45° cuts the length is set by hand according to the scale or, in the case of pre-cut lengths by scanning with a special pair of slotted fences, which are removed from the cutting area during sawing (optional) Cutting length max. 2200 mm min. 240 m Pneumatic saw feed with oil brake cylinder, infinitely variable Clamping device from the front and/or from above, pneumatically operated, from above up to max. 50 mm workpiece height Pneumatic control Safety two-hand control, individual switching for each saw unit Compressed air connection 6-7 bar Air consumption/working clearance 3-4.5 NL Connection for suction 50 mm Saw blade drive 2 x 1.1 kW three-phase motors 2800 rpm Fslq T Tst Haf Del Asgb Dimensions 2940 x 1100 x 1220 mm Weight approx. 360 kg Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1987, Used machine Year of construction: 1987 Machine workshop checked Table size 1100 x 760 mm motor 4,7/5,7 kW pole-changing with clockwise/anticlockwise rotation Milling arbor MK 5/ 30 mm Height and swivel adjustment via handwheel Speeds 3000/4500/6000/9000 rpm Swivel range of the milling arbor - 5 to + 45 ° Folst Hagzoq T Tl Aogb Milling stop with metal jaws Mounted on round insert plate and can therefore be rotated through 360 with table extension on both sides with extendable frame support with 4-roller feed unit Weight approx. 900 kg Pictures show machine in not yet overhauled condition Availability: approx. 4 weeks after order placement Storage location: Flörsheim

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Folq T Tloudqfzs Aegb Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues Fslqjudqkdj T Tl Asgb - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: used, Year of construction: 2010, Used machine Year of construction 2010 Technical data: Fgeleunczwsq T Tl Asb - Voltage: 230 V 50/60 Hz, 120 V 60 Hz - Power: 765 W - Max. Edge height: 45 mm - Edge thickness: 0.4-3 mm - Digital stepless temperature setting: 120-200 °C - Feed speed: 0.5-4.0 m/min - Glue basin capacity: 150 cm³ - Warm-up time: 10 min - Weight: approx. 4 kg - Including table frame - with accessories Availability: short term Location: Hochheim

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Condition: age-appropriate Equipment and technical data: Edging thickness max. 8 mm Workpiece thickness max. 60 mm Workpiece width min. 90 mm Operation via foot pedal Incl. extendable workpiece support Incl. chassis Incl. buffing unit Dimensions: approx. 700 x 600 x 1300 mm Weight: approx. 140 kg Suction nozzle: 70mm Availability: short term Location: Flörsheim Fgslq T Tskwhp Ejl Asb

Condition: used, Used machine Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) 6 drilling spindles in series (32 pitch) Fgslel Riy Hoq T Tl Asb (one spindle of the 8 drill head is defective) 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: short term Storage location: Flörsheim

Condition: new, Universal plate transport helper Ideal, space-saving aid for edge banders, sliding table saws and all other processing machines where the workpiece is moved. Height-adjustable panel transport helper Fjlq T Tljn Uzcpj Aogb Working height continuously adjustable from approx. 900 mm to approx. 1,200 mm Special polygonal body with anti-slip coating for optimum grip in any position 5 solid swivel castors with high-quality lock for stable stand Moves independently on edge banding machines and sliding table saws Weight: approx. 8 kg Availability: ex stock Storage location: Hochheim

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Compact and flexible in the smallest of spaces. Workpieces get their finish on a length of only 2.13 m. Equipped with a 1.1 KW high-frequency motor joining unit and diamond-tipped spiral jointing cutter, Teflon-coated gluing unit, pre-capping unit and HF multifunctional trimming unit 2 free spaces for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5 color touch screen. Technical data Machine length 2122 mm Workpiece thickness 10- 45 mm Workpiece width min approx. 120 mm Edge thickness 0.4 - 2.0 mm Max. edge height = workpiece height + 4 mm (2+2) Electrical connection 230 V Total connection 3.6 kW Feed speed 6.5 m/min. Pneumatic connection 6 bar Net weight approx. 490 kg Options: Fgolq T Tlsu Swadj Asb Surface scraper unit Diamanmat tools height = 45 mm Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2011, Used machine Year of construction : 2011 Condition : Function tested with new PPC-panel Glue thickness max mm : 6 Gluing height max mm : 60 Roll material thickness max mm : 3 Fgolq Tou D Ttqo Tl Aob Workpiece length min mm : 160 Workpiece width min mm : 65 Feed rate max m/min : 10 Glue system cartridge : Yes Glue system granulate : Yes Suitable for PUR glue : Yes Joint trimming unit : Yes Cross-cut saw unit : 2 motors Flush/radius/bevel stations : 1 Corner copying unit : 1 motor Scraper unit : Profile and flat Strip magazine : Yes Cycled units : NC axis(es) Design : Left-hand machine 1903 : Yes 1827 MOT4 : Yes 1832 : Yes 1929 MOT2 : Yes Control and software - HOLZ-HER EDGECONTROL CE mark : Yes Declaration of conformity : Yes Total connection kW : 7,60 L x W x H 4630 x 1411 x 1698 mm Weight approx. kg : 1,235 Location: Hochheim Availability : short term

Condition: used, Year of construction: 2013, Used machine Year of construction: 2013 Machine number: 133 Machine has been completely overhauled new Glue Jet 301 glue system (upper part 1 mm) all units checked all cutters sharpened all knives changed - electrics for infinitely variable feed 400 V / 50 Hz, 2.2 KW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control unit with 15" touchscreen - ECO MODE energy-saving mode - infeed guide 1350 mm, motorized adjustment - Joint trimming unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 trimming units for joining the panel edge. - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit 1801 / 1802 - Milling cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise rotation for jointing trimming unit 1801 / 1802 - Fully automatic edge feeding unit 1901 - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) -Storage chute for granulate - Printing unit 1913 MOT - Cutting unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise rotation Fgjlqjrp It Te T Tl Asb - Air Stream System milling cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise rotation - Shaping cutter unit 1833 MOT4 - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left-hand rotation with CM technology - Milling cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise rotation with CM technology - Scraper unit 1929 MOT2 - HW inserts for scraper holder R = 2.5 mm (2 pcs. required) - Surface scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) Availability: short term Location: Hochheim Hochheim

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 Folq Teryyhcj Tl Aogb max. workpiece height approx. 40 mm min. workpiece length approx. 250 mm min. Workpiece width approx. 70 mm Feed rate approx. 11 m/min. Ready for operation approx. 4-5 min. Power consumption approx. 11 kW with heated infeed ruler with quick-heating adhesive container Pneumatic roller capping up to 3 mm with cross-cut saw up to 5 mm edge thickness with routing station equipped with combined insert routers on request for radius, straight and chamfer routing Extension arm, can be folded down and extended to the front with chassis with integrated extraction system L x W x H 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: at short notice Location: Hochheim Hochheim

Condition: new, Year of construction: 2024, New machine Year of construction 2023 Length approx.: 2300 mm Width/depth approx.: 1100 mm Weight approx.: 980 kg Total length of the tables: 2300 mm Feed table length: 1200 mm Working height: 930 mm Max. chip removal: 6 mm Fence length: 1200 mm Fence height: 190 mm Swivel range of dressing fence: 90 - 45 ° Suction nozzle diameter thickness: 120 mm Main motor: 7 kW Space requirement length: 2300 mm Space requirement width/depth: 1610 mm Explanation of space requirement: The dimensions take into account maximum travel distances or effective lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Max. working height: 250 mm Max. chip removal: 8 mm Supply voltage: 400 V Phase(s): 3 Ph Folq T Tjr Ax E Iol Aogb Type of current: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planing knives: 4 pcs Speed: 5000 min¯¹ Planing width max.: 520 mm Speed: 5/8/12/18 m/min Availability: short term Storage location: Solingen

Condition: used, Year of construction: 2020, Used compressor with integrated refrigeration dryer Year of manufacture 2020 Features V-belt-driven, two-stage, 2-cylinder piston compressor 15-year warranty on the tank against rust perforation due to the internal coating from the date of initial commissioning With rubber vibration mounts for secure stability With intercooler and aftercooler Easily accessible condensate drain valve Fgslq T Toudqkkjl Ajb Additional sleeves with blanking plugs for easy expansion (except 90 l tank) Air outlet 3/4 Space-saving thanks to upright design Extremely quiet thanks to soundproof hood Ready-to-use system thanks to integrated refrigeration dryer Optimal work results thanks to dried compressed air Easy and cost-effective inspection of the tank possible through the handhole Technical specifications Weight 290 kg Noise 69 dB(A) Pressure 10 bar Drive power 4 kW Suction capacity 660 l/min Filling capacity 520 l/min Speed: 1,025 rpm Tank volume: 500 l Dimensions (W x D x H): 1,070 x 850 x 2,055 mm Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 1997, Used machine Year of construction 1997 Universal dowel drilling machine with drilling from below heavy cast iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any miter angle Drilling unit with digital positioning for 0-edge transfer, touch stops are used which transfer the tool thickness to the vertical bore during horizontal drilling to the vertical bore for hole line drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal passage max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles pitch 32 mm Spindle distance min. 32 mm Fgelqjudqk Rj T Tl Asb Spindle distance max. 640 mm Space requirement L X W x H 960 x 630 x1140 mm Weight approx. 300 kg Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Fgslq T Tljudqlno Aeb Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2010, Used machine Edge banding machine, right-hand version Year of manufacture 2010 Equipment and technical data: max. edge thickness 3 mm with preparation for exchange tank min./max. Workpiece thickness 8-60 mm Feed speed approx. 10 m/min Ready for operation approx. 5 min. Min. workpiece length 190 mm Min. workpiece width 80 mm Joining milling unit with 2 milling heads with PLC control (incl. touchscreen) Glue pot with contact roller Pressure zone Cutting shears Felq T Tjuhirbel Aogb Cutting saw Combination milling unit flush/bevel/radius pneumatically adjustable Corner copying unit Surface scraper, short version Dimensions approx. 4700 x 1200 x 1530 mm Weight approx. 1150 kg Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Year of construction: 2006 Equipment and technical data: For manual production or as a stand-by machine in CNC operation, Universal machine for drilling carcase parts and for processing corner joints, frame joints, holes on the surface side, holes for cabinet fittings, etc. - Drilling unit kW 1.84 Volt 230 / 300 Hz 50 Speed rpm 2840 - Number of spindles: 21 - Spindle pitch mm 32 / 32 - Max. spindle distance mm 640 - Spindle direction of rotation 11 x right / 10 x left - Drilling stroke mm max. 80 - Drilling depth with 80 mm drill bit mm max. 45 Fslq T Tljuvabwj Asgb with 105 mm drill bit mm max. 70 - Height adjustment mm 4 - 43 - Workpiece clamping 2 safety clamps - Clamping height mm max. 90 - Gantry passage mm max. 740 - Pneumatic control with foot valve foot valve, electric intermittent operation - Table size mm 880 x 400 Shipping dimensions: 150x110x150 cm Weight: approx. 340 kg Availability: short term Location: Flörsheim

Condition: new, Year of construction: 2018, Exhibition machine Year of construction: 2018 with full warranty Equipment and technical data: Fjlq T Teuwgixol Asgb Range of functions - Room geometry detection through laser measurements - Tachymeter function: standard measuring points can be extended by individual measuring points can be extended - Complex 360° panorama recording of each room scan - Image and measurement functions for every detail - Complete photo documentation - Display of preliminary panoramas via the HottScan app - Data transfer via USB stick or WiFi with the app Technical data at a glance Protractor features Measuring range: Horizontal 347°, vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05-80 m Laser class: 2 Laser type: 650 nm; < lmW ø laser dot: (at distance) 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & lighting conditions Operation User interface: Control panel with soft-touch buttons and LED illumination/ display battery capacity/status display and error display Data exchange Flash memory 32 GB, USB and WLAN Range: 50 m (depending on environment) Power supply Power supply unit: 14.8 V, 1.2 A, with a final charging voltage of 16.8 V, Primary voltage is 100 V - 240 V, 19.5 VA, 50/60 Hz Battery: Operating range between 11.2 V and 16.8 V Running time: Up to 11.5 hours, depending on the use of the LED lighting; approx. 8 hours with typical use Environmental conditions Operating temperature: Operating and charging the batteries: +0° to +40° C Storage temperature: -20° to +50° C Dust and humidity: IP 40 Special features - Hot Swap:The rechargeable battery can be replaced within a few seconds during seconds during operation. - The integrated lighting provides support in poor lighting lighting conditions. - Mobility:The low weight (approx. 4.7 kg) in conjunction with the tripod makes the HottScan HS-1 a handy companion for site companion for site inspections in terms of maintenance and maintenance. Your advantages - Mobility (low weight) and long operating time - Avoidance of multiple inspections - Battery change within a few seconds - Free loaner in case of service from the 3rd working day Incl. HottScan room modeler full version Software for generating a 3D room from the images taken by the room scanner room scanner, export of mass mass data in CSV format, geometry export in DWG/DXF format with layer structure and Collada format Scope of services - Simple modeling of rooms from the first-person perspective - Export of mass data in CSV format - Geometry export: DWG/DXF format with layer structure and Collada format with textures format with textures; Continuous further processing in all 3D CAD programs Incl. transport case for HottScan 3D room scanner - Weather, corrosion and temperature resistant aluminum sheet - Cover and base profile butt-welded - 2 stainless steel hinges - 2 lever hinged latches - All-round rubber seal for dust and splash protection - splash water protection - Temperature resistance from -40°C to +80°C Interior fittings - Nubbed foam in the upper part - Foam insert in the lower part with product nests Availability: Short term Location: Hochheim

Year of construction: 2020, Condition: new, Exhibition machine with AD 2000 Year of construction 2020 Compressor system HOS Suction capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation Filling capacity at 6 bar working pressure Maximum pressure 10 bar Tank capacity 270 l Number of cylinders 2 Number of compression stages 2 PU 1 Dimensions and weights Length approx. 720 mm Width/depth approx. 720 mm Height approx. 1770 mm Weight approx. 160 kg Electrical data Output power 4 kW Supply voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level Lp 80 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Fgolekwg Uyeq T Tl Aeb Availability: short term Storage location: Flörsheim