Condition: new, mobile suction unit Exhibit Dimensions and weights Length (product) ca.1000mmWidth/Depth (product) ca.500mmHeight (product) ca.2100mmWeight (net) ca.39kgSwarf collecting volume110lNominal width outside exhaust inlet203mmNominal width outside exhaust outlet1 x 100, 1 x 120mm Electrical data Idle speed2950min¯¹Power supply230VMains frequency50HzPower input1,5kWApower output1,05kW Filter Filter area1,92m² Noise emission Sound pressure level max.85.7dB(A) Volume flow Nominal volume flow1900m³/hUnderpressure max.1700Pa SUPPLYFine filter bag, chip bag Fgob Hhnyekwhzdobob Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2001, Used machine Year of construction: 2001 Condition: Function tested Fobskwg R Ij Hhnybsgb Equipment and technical data: Milling aggregate 4.4 kW HSK 63 F tool holder Speed 1,000 - 18,000 rpm water-cooled Tool changer: 4-fold lateral Drilling head: 9 vertical drilling spindles in 32 mm increments Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAm 32 Vacuum pump 40 cbm/h Incl. vacuum cups Travel distances: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg Machine is delivered complete in all mechanical, electrical and electronic components and overhauled where necessary All guides checked; console guides replaced New PC control unit for the TWIN CAM control system All axis modules checked and serviced Location: Hochheim Availability: by arrangement

Condition: new, mobile suction unit Exhibit Dimensions and weights Length (product) ca.1000mmWidth/Depth (product) ca.500mmHeight (product) ca.2100mmWeight (net) ca.39kgSwarf collecting volume110lNominal width outside exhaust inlet203mmNominal width outside exhaust outlet1 x 100, 1 x 120mm Fgsb Hhnjkwhy Ieybeb Electrical data Idle speed2950min¯¹Power supply230VMains frequency50HzPower input1,5kWApower output1,05kW Filter Filter area1,92m² Noise emission Sound pressure level max.85.7dB(A) Volume flow Nominal volume flow1900m³/hUnderpressure max.1700Pa SUPPLYFine filter bag, chip bag Availability: short term Storage location: Hochheim

Condition: used, Used suction parts Pipes in the usual dimensions from 80 - 350 mm Feb Hhnyentcu Ssbjgb Branches from 80-80-80 to 350-350-350 Bends 22.5°, 45° and 90° Electric gate valves Pneumatic sliders controls Special components of all kinds If you are interested in an offer, please send us your detailed specification Availability: immediately Storage location: Hochheim

Condition: new, Storage box for carbide saw blades made of Trespa, white 15 compartments for saw blades max. 400 mm Fsbsnvkhho Hhnybegb with recessed grips for inserting/removing saw blades L X W X H approx. 500 x 430 x 460 mm Availability: short term Storage location: Hochheim

Year of construction: 2021, Condition: new, New vacuum pump Year of manufacture 2021 Dry-running vacuum pump Fgjb Hhnyevxxtujbjb Frequency 50/60 Hz Speed 1430/1720 rpm Motor 3.3/4.4 kW Suction air flow 129/154 m³/h Availability: Short-term Storage location: Hochheim

Condition: new, Year of construction: 2021, Compact horizontal unit with two tool outlets for Clamex machining (P14) within the center of the surface -For Clamex machining (P14) within the center of the surface -For drilling and milling Technical specifications: Max. input speed: 8000 rpm Max. output speed: 12000 rpm Gear ratio i=1:1.48 Max. torque Mt= 15 Nm Fsb Hhewb Ehcjnybegb Permissible operating temperature: 85° Unit can be rotated 360° around the drive axis

Condition: new, Year of construction: 2024, New machine Fgeb Hhnewb Eh Noybeb Year of manufacture 2024

Condition: used, Used machine Equipment and technical data: Lock case milling unit Handle hole drill Mortise milling cutter Incl. accessories Motor 1.7 kW Fobjv E S Apo Hhnybjgb 2800 rpm Location: Flörsheim Availability: short term

Condition: used, Year of construction: 2018, Wing unit for wood Her CNC machining centers used Year of manufacture 2018 HSK 63 F mount with torque support with 2 horizontal tool spindles suitable for holding a CLAMEX grooving cutter and a saw blade Technical data: Fob Hhnsv E S Aveybegb max. drive speed 8000 rpm max. output speed 12,000 rpm Permissible operating temperature 85° Unit can be swiveled 360° around the drive axis Noise level 80 db(A) Weight 3.257 kg Availability: short term Storage location: Hochheim

Year of construction: 2020, Condition: used, Refrigeration dryer used Year of manufacture 2020 DESCRIPTION User-friendly operating concept Efficient design for cost-effective and safe operation Cooling fan speed-controlled from 0 - 100%, which eliminates the need for the usual pressure switch and thermostat for fan control Fewer wearing parts while maintaining a constant pressure dew point Control shows five different alarm states and stores them in memory Refrigeration compressor switches off below 15° ambient temperature if no compressed air is flowing through Clarity and good accessibility of all components to be maintained With built-in automatic condensate drain The advantages at a glance Highly economical Excellent price-performance ratio No unnecessary compressed air losses thanks to integrated electronic condensate drain Connected tools and machines are optimally protected User-friendly operating concept TECHNICAL DATA General information Febsv E S A As Hhnybsgb Air volume flow l/min 1800 l/min Air volume flow m³/h 108 m³/h Maximum pressure 16 bar Air connection ½" Power consumption 0.2 kW Dimensions and weights Length (product) approx. 325 mm Width/depth (product) approx. 430 mm Height (product) approx. 445 mm Weight (net) approx. 24 kg Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size. Fgeb Het Na Anehnybeb

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Manual version Main saw blade speed 3700 min¯¹ Sturdy cast steel construction guarantees precision, smooth running and durability Cast iron saw table Large support surfaces thanks to standard table extension and widening Folding rip fence with fine adjustment Angle-adjustable cross-cut fence, extendable up to 3200 mm, with two folding fences Extension arm with material roller Round steel guide with Ø 40 mm diameter Saw blade pendulum guard that can be swiveled to the side with integrated extraction nozzle Scoring unit with separate scoring motor 7.0 kW industrial motor for continuous operation Equipment details Double cradle saw unit Saw unit made from a single cast iron block with a closed ring structure for maximum torsional rigidity Forced vertical movement of the unit via two ground shafts Adjustment permanently smooth and vibration-free with maximum precision Aluminum sliding table Smooth running and precision are the special features of the CASADEI roller table, which uses an exclusive sliding system that uses rigid aluminum profiles on steel guides with curved contact surfaces and guarantees maximum precision with running accuracy along the entire trimming path of the carriage. The result is impressive: Precision even after many years of intensive use without any maintenance Equipped with a ball contact system that has proven itself a thousand times over Permanently smooth-running Insensitive to dust and dirt thanks to minimal point of contact between ball and trapezoidal rail 10-year Holzkraft guarantee on wear of the guideways Saw unit with swivel segment guide Permanent precision thanks to double swivel segment guide 6-year Holzkraft warranty on wear of the swivel segments incl. the following equipment: Cross-section stop with 2 LCD displays Xenia 40 5256189 Electronic position indicator on the rip fence Xenia 40 5256190 Availability: short term Storage location: Hochheim Feb Hhevaarbenybogb

Condition: new, Year of construction: 2021, Exhibition unit Fob Hskwhy Dohnybjgb Year of manufacture 2021 Dimensions and weights Length (product) ca.1700mmWidth/Depth (product) ca.600mmHeight (product) ca.2400mmWeight (net) ca.69kgSwarf collecting volume2 x 215lNominal width outside exhaust inlet260mmNominal width outside exhaust outlet2 x 100, 2 x 120mm Electrical data Idle speed2950min¯¹Power supply400VMains frequency50HzPower input3,8kWApower output3kW Filter Filter area2 x 2,4m² Noise emission Sound pressure level max.89.9dB(A) Volume flow Nominal volume flow4300m³/hUnderpressure max.2000Pa SUPPLYFine filter bag, two chip bags Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 1982, Used machine Condition: good Equipment and technical data: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamp Rear fence Weight approx. kg: 400 Fsb Hhnskwhaaoybjgb Location: Hochheim Availability: short term

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Solid German machine construction for trimming, cutting to length, sizing, mitre cutting etc. - Top operation with control panel positioned at eye level, swiveling, incl. template holder - 7" touchscreen control for electromotive positioning of cutting height, saw blade tilt adjustment, cutting width stop and optionally for height and side adjustment of the scoring saw tool database for 50 saw blades and display of the current speed. - electromotive height and tilt adjustment - saw blade tilt range from 0 47° - APA saw blade quick clamping system - main saw blade speed 3000/4000/5000/6000 rpm - Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm Fsb Hhnyokwhdtebegb - Electromotive width stop with cutting width 1250 mm - Roller carriage with cutting length 3200 mm and blocking every 50 mm - Cross slide with support roller and sliding support widening in both directionsLength stop with mm scale and extension up to 3500 mm with 2 sliding hinged stops and 1 hinged end stop End stop can be used simultaneously as an angle mitre fence on both sides, infinitely adjustable from 0-46° with automatic length compensation and locking for 15°, 22.5°, 30°, 45° fixable- Push-button control with electronic soft start (start/stop)- Electronic wear-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width at width stop 1250 mm electromotive- Length stop on cross slide extendable up to 3500 mm - Max. Saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast table top 1200 x 665 mm - plus table extension 750 x 655 mm- table extension 1430 x 940 mm - Table height / working height 900 mm- Extraction nozzle 120 mm on machine body, 80 mm on protective hood - Motor power 5.5 kW / 7.5 HP- Electrical voltage 400 V / 50 Hz- Roller carriage, length and width stop profile anodized - Machine body and swivel arm powder-coated Color anthracite RAL 7021Sheet metal protective cover top RAL 5000 violet blue, on machine body RAL 7035 light grey - Space requirement: 7110 x 4150 mm - Weight: approx. 1050 kg depending on version up to 1250 kg - CE compliant, GS tested, BG wood dust tested Special equipment: Incl. scoring unit 0.55 kW electromotive positioning for lateral and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table to a lateral parking position, allowing larger saw blades than Ø 350 mm to be used without removing the scoring saw blades Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Incl. Quickstep scoring system: tool-free manual adjustment of the scoring width From 2.8 to 3.8 mm by adjusting the scoring width by 0.05 mm per individual step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm Z =12+12 Incl. SWIVEL DEVICE FOR THE CROSS-SLIT Fast ergonomic sliding into the park position Incl. longitudinal stop with digital display mounted on each stop flap, adjustable to 0.1 mm, max. length 3300 mm Incl. transport pallet

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: In intermediate paint sanding (Cd-L) version Robust, space-saving single-wide belt sander for demanding pre- and finish sanding • Constant working height thanks to upper section adjustment • Working width 1350 mm • Top sanding with combination unit • Entire sanding unit can be tilted up to 10° • Grooved rubber contact roller of proven hardness • Contact roller level continuously adjustable according to an abrasive grit scale • Pneumatic raising/lowering of the contact roller according to the unit selection • Sanding pad with quickly replaceable sliding surface • Parallel spring-loaded, ground steel pressure roller at the inlet • Rubberized pressure roller at the outlet • Belt drive motor 11 kW (1100 mm) 15 kW (1350 mm), 18.5 kW (1600 mm) 400 V/50 Hz; with soft start for low power consumption during start-up • Motorized, finely adjustable height adjustment with digital display • Pneumatic belt tension, control, and oscillation, compressed air consumption approx. 2 l/min. • Optimum safety thanks to an automatic immediate stop with disc brake in the event of belt breakage, belt unwinding, pressure drop, or when the belt inlet door is opened • 1.1 or 1.5 kW workpiece feed with fabric-reinforced rubber conveyor carpet • Vacuum device for work table with small parts area, fan integrated into the machine frame • Entire electrical system with contactor control; Automatic star-delta start of the main motor, motor protection, and ammeter for monitoring chip removal. • 200 mm throughput height • 1350 x 2000 mm sanding belt Automatic thickness adjustment across the entire working width • Workpiece over-thickness protection with immediate feed stop and automatic lifting of the machine head • Continuous chip removal adjustment • Electronic feed control on the control panel, continuously variable from 3 - 15 m/min. • PLC control/programming with touchscreen (color) and TEACH-IN storage (at the push of a button according to the sanding result, i.e., no typing required) • Pneumatic carpet control • Workpiece support tables at the inlet and outlet • ENORMATIC: Fully automated quick adjustment and feed triggering (very useful, for example, for large workpieces) • eco* energy-saving mode • Error diagnostics Fsb Hhnyokwhxiebsgb • Job and operating hour counter - Electronic segmented sanding pad, segment width 22 mm (swivel-mounted special version) - Continuously adjustable sanding belt speed (with program storage) - Blasting nozzles for sanding belt cleaning, operation-controlled, additional extraction nozzle - Additional sanding pad insert for paint sanding Incl. complete air blade Swiveling Including freight, unloading on site Including commissioning and training Location: Solingen Availability: Short-term

Condition: new, Year of construction: 2025, Exhibition machine Year of manufacture: 2025 Equipment and technical data: The Masterwood CNC machining center PROJECT TF is ideal for complex CNC machining in the smallest of spaces, both for solid wood, panel materials or other materials. Advantages: - Very small space requirement - Maximum time savings thanks to extremely fast production times - Fast amortization thanks to low purchase price - Quick learning of the technology thanks to extremely simple operation - Cleanliness of the workpieces with low suction power thanks to machining from below - Extremely fast, simple and variable programming with the MASTERWORK software (standard) - Extremely fast and simple programming of complete cabinets through the use of Palette CAD (option) Technical data: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250mm Travel speed: 0-25 m/min. Y-axis: Max. workpiece width: 1,000mm for all units Min. workpiece width: 85mm Travel speed: 0-50 m/min. Z-axis: Max. workpiece thickness: 60mm Min. workpiece thickness: 10mm Travel speed: 0-20 m/min. The minimum and maximum workpiece sizes depend on the weight and also on the ratio of length to width! Units: 16mm drilling head: Vertical spindles in X direction: 5 pieces Vertical spindles in Y direction: 5 pieces Horizontal double drilling spindle in X direction: 2+2 pieces Horizontal double drilling spindle in Y direction: 1+1 pieces Distance between drilling spindles: 32mm Speed of drilling spindles: 4,000 rpm. Motor: 1.7 kW Groove saw: in X direction Speed: 4,000 rpm Max. saw blade diameter: 125mm Motor: 1.7 kW (The groove saw is integrated in the drill head) Control: Personal computer Operating system: Windows 10 Pro - 64 bit Processor: Intel Hard disk with at least 300 GB storage space Color screen Integrated video card 2 Ethernet cards Program: MASTERWORK MACHINE VERSION Other data: Required air pressure: 8 bar Air consumption: max. 750 l/min. Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Extraction nozzle: 1 x 150mm Other features: Fgob Hjv E Szxjhnybeb - Air tables in the work area - Roller table in the inlet and outlet - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Import of DXF files (Operating instructions, circuit and pneumatic diagram are included in digital form) "PARTNERSHIP EDITION" consisting of: Milling unit, including MASTERWORK software extension Speed: 1,000 to 18,000 rpm. Motor: 4.5 kW with ISO 30 mount Incl. integrated suction control (when drilling only the drill head is suctioned, when milling only the milling unit is suctioned) 6-way tool changer Tool equipment, consisting of: 3 pieces 5mm – GL 70mm - blind hole drill (right) 2 pieces 5mm – GL 70mm - blind hole drill (left) 1 piece 5mm – GL 70mm - through drill (left) 2 pieces 8mm – GL 57.5mm - blind hole drill (right) 2 pieces 8mm – GL 57.5mm - blind hole drill (left 1 piece 10mm – GL 57.5mm – blind hole drill (right 1 piece 10mm – GL 57.5mm – blind hole drill (left 1 piece 10mm – GL 70mm – blind hole drill (left) 1 piece 8mm – GL 70mm - blind hole drill (right) 1 piece

Condition: used, Year of construction: 2001, Used machine Year of manufacture 2001 Grinding width 1100 mm Grinding belt length 1900 mm Workpiece thickness 3-150 mm Infinitely variable feed speeds 2.5-13 m/min. 1 steel contact roller 1 rubber-coated contact roller Fjb Hhnyjwb Egxobogb 1 sanding pad unit with air cushion sanding pad Drives: 1st sanding unit 15 kW 2nd sanding unit 15 kW 3rd sanding unit 11 kW with table extension at the inlet with table extension at the outlet Total connected load 43 kW Weight 3100 kg Extraction capacity approx. 6750 m³/h Air speed 20 m/s Compressed air connection 6-8 bar Air consumption approx. 30 l/min. L x W x H 1750 x 2740 x 1890 mm

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Basic machine - DYNESTIC 7532-10.5 Automatic Dynestic table For classic nesting processing with wear plate Processing length 3100 mm Machine frame in welded construction with ground and hardened prism guides for the traveling column, aggregate head and consoles Traveling column in gantry design Rack and pinion drive, helical gears, in X and Y directions, Ball screw spindles in Z direction for precise positioning Technical data: Processing dimensions: Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Max. travel distances X = 4695 mm Y = 2100mm Z = 293 mm Max. drive-over height DYNESTIC table Z = 100 mm from top edge of table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table Fixed, continuous machining table with grid division, continuous grooves in X and Y direction, spacing of the grooves 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum field 1-circuit vacuum system Drilling unit 7877, 19 spindles Drive power 1.7 kW 13 vertical spindles can be called up individually Arrangement in U-shape 5+4 in X and 4 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from screw end (depending on plate thickness) Spindle extension stroke: 70 mm Direction of rotation: clockwise / anti-clockwise in Change n(max.) 1000 - 4400 min-1 continuously adjustable Mounting: M 10 thread - 11 mm fit without tools, without mounting 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Mounting: M 10 thread, 11 mm fit Total drill length max. 63 mm from screw end without tools, without mounting Milling unit 7842, Power: 12.0 kW (S6) n(max.) = 1000 - 24000 min-1 continuously adjustable, max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand threaded nut (for right-hand rotating tools) with collet chuck with HSK shaft Ceramic ball bearing (hybrid bearing) Tool weight max. 6 kg (incl. holder) Tools: milling and grinding tools max. Ø 160 mm Safety paneling in accordance with CE standard Safety fence on the side and rear Vacuum pump 500 m³/h dry runner Personal safety through light barriers in the front area of the machine Handheld control unit for remote control of the machine with the following operating functions: > Start / stop of the machining program > Speed control of the machining cycles > Reset button Fgebevymfuo Hhnybeb > Manual feed / rapid traverse for all axes > EMERGENCY STOP CAMPUS V7 CAD/CAM software 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM properties for creating part variants with macro technology Automatic central lubrication Automatic lubrication according to defined lubrication intervals Additional sealing against dust through overpressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y and Z directions, for all ball screws in Y and Z directions for all milling spindles

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: •Robust, space-saving dual-belt grinder for demanding pre- and finish-grinding •Constant working height thanks to upper section adjustment •Working width 1350 mm •Top-loading grinding, with 2 grinding units •1. Unit with grooved rubber contact roller of proven hardness •Pneumatic (programmable) adjustable contact roller, contact roller level continuously adjustable according to an abrasive grit scale •Second unit with electronically controlled, segmented sanding pad, segment width 35 mm, and quickly replaceable sliding lining •Parallel spring-loaded, ground steel pressure roller at the inlet •Rubber-coated pressure rollers between the sanding units and at the outlet Fgeb Hhnouhiq Dsybjb •Motor 15 kW (20 HP), 400 V/50 Hz with soft start for low power consumption during start-up •Motor-driven, finely adjustable height adjustment with numeric display •Belt tension, control, and oscillation are pneumatic, compressed air consumption approx. 4 l/min. Optimum safety thanks to automatic immediate stop with disc brake in the event of a belt break. •Workpiece feed 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt. •Complete electrical system with contactor control; automatic star-delta start of the main motor, motor protection, and ammeter for monitoring chip removal. •Passage height 200 mm •Sanding belt size 1350 x 2000 mm Comfort features: •Automatic thickness adjustment across the entire working width. •Workpiece over-thickness protection with immediate feed stop and automatic lifting of the machine head. •Stepless chip removal adjustment. •Electronic feed control on the control panel, continuously adjustable from 3 - 15 m/min. PLC control/programming with color touchscreen and TEACH-IN storage (at the touch of a button based on the grinding result, i.e., no typing required) Pneumatic carpet control Workpiece support with roller at the infeed and outfeed Enormatic: Fully automated quick adjustment and feed solution eco* energy-saving mode Fault diagnostics Job and operating hour counter Machine in E-Plus version (RE) Including 1350 cm outfeed table extension, foldable, without insert plate Including freight, unloading on site Including commissioning and training Location: Hochheim Availability: Approx. week 51/2023

Condition: used, Year of construction: 2017, Used machine Year of construction: 2017 Commissioning 2019 Equipment and technical data: > Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert > Push-button control with electronic soft start (start/stop) > Electronic wear-free motor brake > Electromotive cutting width at width stop 1250 mm > Length stop on cross slide extendable up to 3500 mm > Saw blade Ø 400 mm can be lowered under the table > 120 mm extraction socket on machine body, 80 mm on protective hood > Roller carriage, length and width stop profile anodized > Machine body and swivel arm powder-coated anthracite RAL 7021 > Cross slide galvanized > CE compliant, GS tested, BG wood dust tested Cutting length of roller carriage 3450 mm Cutting height max. 155 mm at 90°, 105 mm at 47° Cutting width width stop 1250 mm Max. Saw blade Ø 450 mm Fsbovlmave Hhnybjgb Table size cast iron table top 1200 x 655 mm plus table extension 750 x 655 mm Table extension 1430 x 940 mm Table height 900 mm Motor power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Space requirement 7110 x 4150 mm Weight approx. 1150 kg Incl. 3 pcs. Digital display on length stop Incl. double-sided mitre fence DSG A-S Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2010, Used suction unit not dust-tested Technical data L/W/H mm640/490/1880 Air output m³/h1000 Negative pressure Pa1200 Fgjb Hhnjqa Nzwjybob Filter area m²1 Filling quantity l80 Hose length mm2500 Hose connection Ø mm100 Weight approx. kg30 Motor equipment 400 V/50 Hz Power input kW (HP)0.55 (0.75) Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2022, Exhibition machine Fgsbsqv Iaho Hhnybeb Year of construction: 2022 Equipment and technical data: Basic machine 7402 with pin-jet dowel insertion function Hand-held control unit 2D barcode scanner UPS Quattro HSK package incl. 4-fold tool changer XL drilling head Double drilling spindle in Y Automatic central lubrication Location: Hochheim Availability: approx. week 32/2022

Condition: new, Year of construction: 2021, Compact horizontal unit with two tool outlets for Clamex machining (P14) within the center of the surface Feb Hhswb Eg Senybegb -For Clamex machining (P14) within the center of the surface -For drilling and milling Technical specifications: Max. input speed: 8000 rpm Max. output speed: 12000 rpm Gear ratio i=1:1.48 Max. torque Mt= 15 Nm Permissible operating temperature: 85° Unit can be rotated 360° around the drive axis