Condition: used, Year of construction: 2020, Used compressor with integrated refrigeration dryer Year of manufacture 2020 Features V-belt-driven, two-stage, 2-cylinder piston compressor 15-year warranty on the tank against rust perforation due to the internal coating from the date of initial commissioning With rubber vibration mounts for secure stability Fgolq Rh Djudqkks Sob With intercooler and aftercooler Easily accessible condensate drain valve Additional sleeves with blanking plugs for easy expansion (except 90 l tank) Air outlet 3/4 Space-saving thanks to upright design Extremely quiet thanks to soundproof hood Ready-to-use system thanks to integrated refrigeration dryer Optimal work results thanks to dried compressed air Easy and cost-effective inspection of the tank possible through the handhole Technical specifications Weight 290 kg Noise 69 dB(A) Pressure 10 bar Drive power 4 kW Suction capacity 660 l/min Filling capacity 520 l/min Speed: 1,025 rpm Tank volume: 500 l Dimensions (W x D x H): 1,070 x 850 x 2,055 mm Availability: Short-term Storage location: Flörsheim

Year of construction: 2025, Condition: new, machine/vehicle number: 1533, Work surface 3500 x 1500 mm (Inner frame dimensions approx. 3400 x 1400 mm) Folding table with 12 mm tabletop for space-saving installation Becker vacuum pump with 1.25 kW motor, 400 V, 50 Hz Vacuum pump flow rate 40 m³/h Tank capacity 100 l Natural rubber membrane with 700% stretchability Max. component height approx. 600 mm External dimensions approx. 3600 x 1650 x 1000 mm Including chassis with 4 swivel casters Weight approx. 440 kg Fjlqod Rzl Ue Rh D Sjgb without transport, ex warehouse Seevetal, Subject to prior sale

Condition: ready for operation (used), Year of construction: 1999, Functionality: limited functionality, machine/vehicle number: 2092, travel distance X-axis: 36,000 mm, travel distance Y-axis: 5,800 mm, travel distance Z-axis: 1,250 mm, feed length X-axis: 36,000 mm, feed length Y-axis: 5,800 mm, feed length Z-axis: 1,250 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, controller model: NUM 1060 W, workpiece length (max.): 34,000 mm, workpiece width (max.): 4,500 mm, workpiece height (max.): 240 mm, workpiece weight (max.): 25,000 kg, total height: 4,825 mm, total length: 43,700 mm, total width: 11,855 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 33,000 W, spindle nose: HSK 100F, number of spindles: 1, number of slots in tool magazine: 18, tool length: 400 mm, tool diameter: 750 mm, tool weight: 20,000 g, Equipment: rotational speed infinitely variable, CNC large joinery portal (manufacturer CMS, type "NC-PMC36-TUCU", year of manufacture 1999) for the processing of large-format solid wood components (glulam and CLT) for sale. The joinery gantry can be used for simultaneous 5-axis processing of large-format timber components up to 34.0 m long and 4.5 m wide. Among other things, this system was used to process the roof girders for the Expo roof in Hanover. The system consists of a massive movable bridge that is moved via guide rails at a maximum speed of 50 m/minute. The processing spindle is mounted on a carriage that enables movement in the Y and Z directions. A fourth axis allows the unit to rotate on the vertical axis, while the fifth axis allows the spindle to be tilted in the vertical plane. Today, the components are positioned on wooden beams in a fixed grid. The components can be machined on three sides using the appropriate sliding wooden blocks. Components with too little weight are fixed with screws during processing. Positioning is carried out using a laser system, which is not included in the scope of delivery. However, new laser systems can be implemented relatively easily. The system is currently controlled via a CAM system from Siemens. The CAM software is not included in the scope of delivery. However, all standard CAM systems can be used by adapting the post-processor. The vacuum system for fixing the components described in the enclosed order confirmation is not included in the scope of delivery. The system is extremely robust and solid and has provided good service for over 25 years. It can be inspected during operation. The guide rails, the bridge, the spindle and the entire mechanical design cannot be more robust and solid, even in new, comparable systems. However, it is recommended that the system be completely overhauled by means of a retrofit in order to comply with current safety regulations. Appropriate specialist companies can be named. Felq Rhjvitzzs D Segb The machine is to be handed over in April 2025 and dismantling should ideally be carried out by the buyer. However, only a limited time window is available for this.

Condition: used, Year of construction: 1997, Used machine Fgelsudqk Rjq Rh D Sob Year of construction 1997 Universal dowel drilling machine with drilling from below heavy cast iron table pneumatic swivel device; effortless changeover from vertical to horizontal or to any miter angle Drilling unit with digital positioning for 0-edge transfer, touch stops are used which transfer the tool thickness to the vertical bore during horizontal drilling to the vertical bore for hole line drilling, the stop system is slid into guides on the side of the machine table Working width 700 mm Portal passage max. 850 mm Drilling depth max. 80 mm Operating pressure 6-8 bar Motor 1.9 kW Spindle speed 2800 rpm 21 spindles pitch 32 mm Spindle distance min. 32 mm Spindle distance max. 640 mm Space requirement L X W x H 960 x 630 x1140 mm Weight approx. 300 kg Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg Fjlq Rsudqlnsh D Sjgb TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2010, Used machine Edge banding machine, right-hand version Year of manufacture 2010 Equipment and technical data: max. edge thickness 3 mm with preparation for exchange tank min./max. Workpiece thickness 8-60 mm Feed speed approx. 10 m/min Ready for operation approx. 5 min. Min. workpiece length 190 mm Min. workpiece width 80 mm Joining milling unit with 2 milling heads with PLC control (incl. touchscreen) Glue pot with contact roller Pressure zone Cutting shears Cutting saw Combination milling unit flush/bevel/radius pneumatically adjustable Corner copying unit Surface scraper, short version Dimensions approx. 4700 x 1200 x 1530 mm Weight approx. 1150 kg Availability: short term Storage location: Flörsheim Fgslq Rh Douhirbs Seb

Condition: used, Year of construction: 2006, Used machine Year of construction: 2006 Equipment and technical data: For manual production or as a stand-by machine in CNC operation, Universal machine for drilling carcase parts and for processing corner joints, frame joints, holes on the surface side, holes for cabinet fittings, etc. - Drilling unit kW 1.84 Volt 230 / 300 Hz 50 Speed rpm 2840 - Number of spindles: 21 - Spindle pitch mm 32 / 32 - Max. spindle distance mm 640 Fslqsuvabwj Rh D Segb - Spindle direction of rotation 11 x right / 10 x left - Drilling stroke mm max. 80 - Drilling depth with 80 mm drill bit mm max. 45 with 105 mm drill bit mm max. 70 - Height adjustment mm 4 - 43 - Workpiece clamping 2 safety clamps - Clamping height mm max. 90 - Gantry passage mm max. 740 - Pneumatic control with foot valve foot valve, electric intermittent operation - Table size mm 880 x 400 Shipping dimensions: 150x110x150 cm Weight: approx. 340 kg Availability: short term Location: Flörsheim

Condition: new, Year of construction: 2018, Exhibition machine Year of construction: 2018 with full warranty Fgelq Rhjuwgixj D Seb Equipment and technical data: Range of functions - Room geometry detection through laser measurements - Tachymeter function: standard measuring points can be extended by individual measuring points can be extended - Complex 360° panorama recording of each room scan - Image and measurement functions for every detail - Complete photo documentation - Display of preliminary panoramas via the HottScan app - Data transfer via USB stick or WiFi with the app Technical data at a glance Protractor features Measuring range: Horizontal 347°, vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05-80 m Laser class: 2 Laser type: 650 nm; < lmW ø laser dot: (at distance) 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & lighting conditions Operation User interface: Control panel with soft-touch buttons and LED illumination/ display battery capacity/status display and error display Data exchange Flash memory 32 GB, USB and WLAN Range: 50 m (depending on environment) Power supply Power supply unit: 14.8 V, 1.2 A, with a final charging voltage of 16.8 V, Primary voltage is 100 V - 240 V, 19.5 VA, 50/60 Hz Battery: Operating range between 11.2 V and 16.8 V Running time: Up to 11.5 hours, depending on the use of the LED lighting; approx. 8 hours with typical use Environmental conditions Operating temperature: Operating and charging the batteries: +0° to +40° C Storage temperature: -20° to +50° C Dust and humidity: IP 40 Special features - Hot Swap:The rechargeable battery can be replaced within a few seconds during seconds during operation. - The integrated lighting provides support in poor lighting lighting conditions. - Mobility:The low weight (approx. 4.7 kg) in conjunction with the tripod makes the HottScan HS-1 a handy companion for site companion for site inspections in terms of maintenance and maintenance. Your advantages - Mobility (low weight) and long operating time - Avoidance of multiple inspections - Battery change within a few seconds - Free loaner in case of service from the 3rd working day Incl. HottScan room modeler full version Software for generating a 3D room from the images taken by the room scanner room scanner, export of mass mass data in CSV format, geometry export in DWG/DXF format with layer structure and Collada format Scope of services - Simple modeling of rooms from the first-person perspective - Export of mass data in CSV format - Geometry export: DWG/DXF format with layer structure and Collada format with textures format with textures; Continuous further processing in all 3D CAD programs Incl. transport case for HottScan 3D room scanner - Weather, corrosion and temperature resistant aluminum sheet - Cover and base profile butt-welded - 2 stainless steel hinges - 2 lever hinged latches - All-round rubber seal for dust and splash protection - splash water protection - Temperature resistance from -40°C to +80°C Interior fittings - Nubbed foam in the upper part - Foam insert in the lower part with product nests Availability: Short term Location: Hochheim

Year of construction: 2020, Condition: new, Exhibition machine with AD 2000 Year of construction 2020 Compressor system HOS Suction capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation Filling capacity at 6 bar working pressure Maximum pressure 10 bar Tank capacity 270 l Number of cylinders 2 Number of compression stages 2 PU 1 Dimensions and weights Length approx. 720 mm Width/depth approx. 720 mm Height approx. 1770 mm Felq Rhskwg Uyj D Ssgb Weight approx. 160 kg Electrical data Output power 4 kW Supply voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level Lp 80 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Availability: short term Storage location: Flörsheim

Condition: used, Used machine Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Folekwhd Esq Rh D Sogb Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: new, Year of construction: 2022, New machine Fsljkwhk Ssq Rh D Sjgb Year of manufacture 2022 Scope of delivery: Table widening Rubber rollers with veneer edge grinding device with contact shoe with fine ice setting and stop rulers with grooved infeed ruler for veneer overhangs quick changeover from veneer edge sanding to solid wood sanding possible length (product) approx.: 1900 mm width/depth (product) approx.: 900 mm Height (product) approx.: 1350 mm Weight (net) approx.: 290 kg Power oscillation motor: 0.25 kW Suction nozzle diameter: 140 / 100 mm Height adjustment longitudinal table: 230 mm cross table height min.: 720 mm working table length: 960 mm working table width: 350 mm Working table height adjustment: 230 mm 400: Supply voltage V Phase(s): 3 Ph type of current: AC Mains frequency: 50 Hz grinding belt length: 3000 mm grinding belt width: 200 mm belt rotation speed(s): 20 m/s oscillation stroke: 20 mm grinding surface length: 1050 mm grinding surface width: 200 mm incl. 1 VE abrasive belts K 80 1 VE abrasive belts K 120 Availability: short term Storage location: Hochheim

Year of construction: 2023, Condition: new, New machine Year of construction 2023 DESCRIPTION User-friendly operating concept Efficient design for cost-effective and safe operation Cooling fan speed-controlled from 0 - 100%, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wearing parts while maintaining a constant pressure dew point Controller displays five different alarm statuses and stores them in memory Refrigeration compressor switches off below 15° ambient temperature if no compressed air is flowing through Clear arrangement and easy access to all components requiring maintenance With built-in automatic condensate drain The advantages at a glance High efficiency Outstanding price-performance ratio No unnecessary compressed air losses thanks to integrated electronic condensate drain Connected tools and machines are optimally protected User-friendly operating concept TECHNICAL DATA General information Air flow rate l/min 1200l/min Air volume flow m³/h 72m³/h Maximum pressure 16bar Air connection½" Power consumption 0.2kW Dimensions and weights Length (product) approx. 325mm Width/depth (product) approx. 430mm Height (product) approx. 445mm Weight (net) approx. 24 kg Fgelq Req Hh Eieh D Ssb Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Equipment and technical data: - Solid German machine construction - Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor - Travel device for greater mobility - Cast iron table 700 x 380 mm thick-walled and highly ribbed - 2 manual eccentric clamps with solid steel columns for clamping the workpieces - Smooth-running cross support with adjustable ball guides for lateral and depth adjustment - 2-lever operation Felqsri U Hde Rh D Sjgb - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via left and right side stops - Drill motor power 1.3/1.7 kW, pole-changing, speed 1500/3000 rpm with mechanical motor brake and practical tool tray - incl. emergency stop button - High-precision two-jaw drill chuck with protective sleeve, clamping range 1-20 mm - Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller high-precision milled raster, fixed via spring-loaded raster bolt - Plug-in frame stop with index bolt for the positions: center, left, right Mitre fence, plug-in with index bolt for 45° and 22.5° - Workpiece fence up to 1500 mm for series processing - CE-compliant, GS tested - Max. Drilling depth 145 mm - Max. Drilling length 240 mm - Height adjustment 135 mm - Clamping range 5-20 mm - Motor power 1.3 / 1.7 kW - Voltage 400 V / 50 Hz - Suction nozzle 100 mm Ø - Color RAL 7035 light grey and RAL 5000 violet blue Special equipment: - Dial gauge in the handwheel, with 0.1 mm height adjustment display instead of the scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor including loosening and locking of the raster bolt on the dowel drilling device, narrow workpieces can then also be processed from the side of the table - Emergency stop button with key - Safety cover over the drill chuck with electric lock New price with this equipment 12213. Shipping dimensions: 120x80x160 cm Weight: approx. 200 kg Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2021, Used machine Year of manufacture 2021 As good as new Equipment and technical specifications: Total table length 2720mm Task table length 1498mm Maximum chip removal 8mm Joining stop length 1200mm Joining stop height 190mm Joining stop swivel range 90° - 45° Extraction connection: Felqjruuhyj Rh D Ssgb Extraction nozzle diameter thickness 120mm Installation information: Space required length 2750mm Space required width/depth 1604mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Electrical Data: Drive motor power: 7 kW Connection voltage: 400 V Line frequency: 50 Hz Planer block Planer block type: TERSA Planer block diameter: 120 mm Number of planer blades: 4 Planer block speed: 5000 rpm Planing width: max. 520 mm Dimensions and weights: Length: approx. 2750 mm Width/depth: approx. 1500 mm Weight: approx. 720 kg Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 1987, Used machine Year of construction 1987 Condition: workshop checked stand projection 750 mm Spindle stroke 100 mm max. clearance between table and spindle 310 mm Spindle speed 10000/20000 rpm Motor power 2.2/3.3 kW Fgjlq Rstyq Hgoh D Seb Collet tool attachment with blowing device via compressed air connection External dimensions 905 x 1380 x 1600 mm Weight 533 kg Availability: by arrangement Location: Hochheim Hochheim

Condition: used, Year of construction: 1995, Hole line and hardware drilling machine Year of construction 1995 Single-row hole drilling and hardware drilling machine Pot hinges and fittings can be processed without major conversion work Workpiece width max. 600mm Drilling beam with 15 spindles pitch 32 mm Manual indexing system with drop-in stops Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Fgolq Rhjudqlbs D Sob Drill bit holder 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Availability: short term Storage location: Flörsheim

Condition: used, Used machine Used long belt sander from Markant table size approx. 2400 x 800 mm Availability: short term Location: Hochheim Hochheim Folq Rekwhfxjh D Sjgb

Condition: used, Year of construction: 1991, Used machine Used profile sanding machine of the company Arminius type ST 10 Folq Rhskwhh Te D Sjgb Year of construction: 1991 MNo.: 0-290-02-1567 Engine power: 1.1 kW Spindle adjustment: 0° - 135° Table surface: 1000 x 800 mm without visible objects on the table surface Availability: short term Location: Röllbach

Condition: used, Year of construction: 1979, Used machine Year of construction: 1979 Condition: according to age - Space requirement: 4200 x 2600 mm - Belt dimensions: 7800 x 150 mm - Table size: 2900 x 1400 mm - working length: 2800 mm - Passage under belt: 340 mm - Offset right: 1100 mm - Drive motor: 7.5 kw - Weight: 1100 kg Fjlq Rhokwhb Ue D Ssgb Availability: short term Location: Röllbach

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Fgelq Rhjtq Nlrs D Ssb Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim

Condition: used, Year of construction: 2009, Used dust extractor Year of manufacture: 2009 Condition: minor external damage, fully functional Nominal flow rate: 1120 m³/h Min. flow rate: 814 m³/h Extraction nozzle: 120 mm 2050 Pa Filter area: 4.3 m² Motor: 2.2 kW, 400 V HxWxD: 1985 x 1085 x 650 mm Weight: approx. 99 kg Felq Rh Djvu Iduj Sogb Availability: Short-term Storage location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 TECHNICAL DATA Wheel diameter 500 mm Belt speed 1300 m/min Cutting height 330 mm Cutting width 480 mm Blade length max. 4140 mm Saw blade width min. / max. 15 mm / 25 mm Optional with special covering saw blade width min. / max. 6 mm / 20 mm Table size 670 x 495 mm Table height 900 mm Extraction nozzle 2 x Ø 100 mm Motor power 1.5 kW / 2 HP Special voltage: 400 V / 50 Hz Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 210 kg TECHNICAL DESCRIPTION Solid German mechanical engineering Machine stand in elegant, modern, torsion-free, double-chamber welded steel construction, upper and lower doors secured by limit switches, upper and lower precision band saw blade guides APA 2, size. 1 Finely planed gray cast iron table Table top can be swiveled up to 45° Fgslq Rh Dev Huggo Ssb Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Stop profile can be folded over Blade tension indicator 1 saw blade 4140 x 20 x 0.45 mm, tooth width 6 mm, No. 3783.20K Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion Push button switch for start/stop with emergency stop button and motor protection relay Wear-free, electric motor brake CE-compliant GS tested Machine stand left-hand version Drive motor 1.5 kW / 2.0 HP Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Folqjv E Sy Uj Rh D Sogb Equipment and technical data: L'invincibile SI X - SLIDING CIRCULAR SAW WITH DOUBLE SAW BLADE INCLINATION L'invincibile SI X version CE Volt 400 EU Frequency 50 Hz Pre-scoring unit with independent motorization Signaling LED of the pre-scoring unit in operation Main saw blade diametermm550 Max. saw blade cutting height at 90°/+46°/-46°mm200/130/105 Cutting width at the parallel stopmm1500 Cutting length with carriagemm3200 x 3200 Three-phase motorkW/Hz9 / 50 Availability: short term Location: Hochheim

Condition: new, New machine Mobile dust extractor Dimensions and weights: Length (product) approx. 1000 mm Width/depth (product) approx. 500 mm Height (product) approx. 2100 mm Net weight approx. 39 kg Chip collection volume 110 l Nominal diameter of the suction nozzle inlet 203 mm Nominal diameter of the suction nozzle outlet 1 x 100, 1 x 120 mm Electrical data: Idle speed 2950 rpm Connection voltage 230 V Mains frequency 50 Hz Power input 1.5 kW Power output 1.05 kW Filter: Filter area 1.92 m² Noise emission: Sound pressure level max. 85.7 dB(A) Flow rate: Nominal flow rate 1900 m³/h Maximum negative pressure 1700 Pa Scope of delivery: Extractor, fine filter bag, chip bag Fgolq Rh Djwb Ehpe Sjb Availability: Short-term Storage location: Hochheim

Condition: used, Year of construction: 2018, Used machine Year of manufacture 2018 Basic equipment Electric height and tilt adjustment 0-46° with automatic cutting height correction when tilting Control at eye level, pivoting Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Max. sawblade projection 150 mm Max. sawblade diameter 450 mm Drive power 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height 91 cm Productivity package Motor 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life. Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a max. sawblade diameter of 550 mm and a max. sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the max. sawblade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). Two-sided tilting! RAPIDO Plus 3-Axis Scoring Unit With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED Lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. Sliding Table with a Carriage Length of 3000 mm Basic Equipment Sliding Table with a Carriage Length of 3000 mm The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in the respective hard-chrome-plated guide rods. This running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-cavity system. The table surface is precisely planed and anodized. A hard-chrome-plated round bar, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. DIGIT-L Angle Miter Stop, Cutting to Lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the swivel angle is continuously adjustable by 49° and is digitally displayed. The Fgjlewb Eitsq Rh D Sob play-free and robust stop flaps can be easily moved and adjusted as individual flaps over the entire range up to a maximum of 3500 mm. For cutting to lengths up to approx. 1700 mm, the roller-supported, stable telescopic