Condition: used, Precise angles and miters from 0° to 46°, with digital display for degree indication Fgjbuowhzg Uo Shhysb Storage location:

Condition: used, Year of construction: 2004, Bohraggregat: Krass Teilung : 32 mm Fsbu Shhevq Tb Rjyjgb Bohreraufnahme : Spannfläche Bohrerschaft: 10 mm Bedienung : Handschalter Bohrrichtung : von oben fest Bohrköpfe : Lochreihe/Topfbänder Anzahl Materialspanner : 2 Stk Art der Materialspannung : pneumatisch Ausführung : stationär Anschlagsystem : für Lochreihe und Konstruktionsreihe

Condition: excellent (used), Year of construction: 2006, FH 2 jointing saw and fine-cutting saw with jointing unit (planing unit) and veneer stop table Robust mechanical engineering by Mayer A video of the machine in operation can be sent upon request. For tear-free and joint-tight cutting of veneer, including thick-cut veneer Maximum cutting length: 3100 mm The saw unit and jointing unit are combined in a single unit, so only one unit needs to be moved. Easy-to-guide saw unit, runs on precise linear guides. Rear support table with full-length finger stop, adjustable from 2 - 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor 1.8 kW, milling unit 1.0 kW The motors can be conveniently switched on using the handle, meaning they only run when needed. Carbide-tipped fine-cutting blade, sharpened Z4 planer head, equipped with new knives and spare knives included Practical front veneer support, extendable for planing unit Left-hand angle stop 100mm extraction connection with extraction duct Emergency stop switch CE mark Operating instructions On-board tool kit Original paint, only a few areas touched up Machine dimensions approx. 4350 x 1700 x 1400mm (LxWxH) Weight approx. 800kg. Febuswamnzo Shhyogb The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse; see "Other offers from this supplier."

Condition: used, Year of construction: 2002, Number of saw blades: 1 Vertical saw blades: 1 Roller diameter: 940 mm Number of feeder rollers: 1 Saw blade width max: 80 mm Saw blade length max: 6.580 mm Passage height max: 560 mm Opening width: 910 mm Main motor power: 5,5 kW Type: left-side machine Saw blade: Vertical Fgebujwfrayo Shhyob Feed rollers: Vertical Roller guidance top: Yes Roller guidance bottom: Yes Electrical feed: Yes Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: AB/183594, cutting length (max.): 3,800 mm, cutting width (max.): 1,700 mm, cutting width at rip fence: 1,700 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, table length: 3,800 mm, total length: 4,200 mm, total width: 4,250 mm, height adjustment type: electric, table height: 905 mm, length stop: 2,150 mm, pivoting range: 45 °, power: 5.5 kW (7.48 HP), workpiece length (max.): 3,400 mm, Equipment: motor brake, scorer, Carriage 3.80m long / saw blade can be pivoted to one side up to 45° / scoring unit / new motor (5.5kW) since March 2024 / all stops manually adjustable / cutting height with 350mm saw blade 105mm, max. saw blade diameter 400mm / accessories: 1 hold-down clamp, 2 clamps, 1 separate angle stop Fgebu Sov I S Rlehhyob

Condition: good (used), Year of construction: 1998, Functionality: fully functional, pressure: 60 bar, pressure (max.): 290 bar, working length: 18,000 mm, For Sale: Eissele MegaPress 2000 – Block Gluing Press (1998) We are offering an Eissele MegaPress 2000, a high-capacity block gluing press ideal for industrial laminated timber production and structural woodworking applications. Technical Specifications: Brand & Model: Eissele MegaPress 2000 Year of Manufacture: 1998 Pressing Length: 18,000 mm Switchable: 1x 12 m / 1x 6 m Insert Height: 2,850mm Fgebu Shhowa Nnwsyob Insert Width: 670mm Cylinder Stroke: 1,500mm Distance Between Press Cylinders: 400 mm Pressing Pressure (Vertical Cylinders): 10 kp/cm², adjustable from 60–290 bar Pressing Pressure (Alignment Beams): 6,000 kg System Type: Electro-hydraulic Key Features: Suitable for CE Certification: We provide a custom-written manual for this press process, enabling you to achieve CE marking for your laminated wood products. Heavy-Duty Performance: Built for demanding industrial environments with precision and strength. Flexible Production: Can be operated in two separate sections for 6 or 12 meters. High Efficiency: Even pressure distribution ensures strong bonds and consistent quality. Additional Information: The machine is currently in use at our location in Wieringerwerf, the Netherlands. Live demonstration possible – buyers can view the press while it is operational. Buyer is responsible for dismantling and transport. Optional Add-ons (available at extra cost): Glue Spreader Roller Conveyor (Material Infeed System) These accessories are available separately and complement the press system for a complete gluing workflow. Interested? Contact us for more details, pricing, or to arrange a viewing appointment.

Condition: used, Year of construction: 2022, Special price exhibition machine Garbsen edge banding machine K36 pcs. POWERFUL AND ROBUST. This Hebrock long-runner offers unimagined possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in daily work. With the option of equipping the machine with a step cutter and a multi-radius scraper, Hebrock sets new standards in the field of perfect edge processing of a wide variety of edge thicknesses. TECHNICAL PROFILE - Max. edge thickness up to 3 mm (optionally 8 mm) - Min. / Max. workpiece thickness 8-60 mm* - Min. workpiece length approx. 200 mm* - Min. workpiece width approx. 80 mm* - Feed speed approx. 7/10 m/min - Ready for operation in 6 minutes - Optional multi-tools - Weight 1700 kg - Extraction nozzle for jointing machine 80 mm - Extraction nozzle for main extraction (rear of machine) 140 mm - Air consumption standard machine approx. 300-400 l/min - Air consumption airtronic machine approx. 600-800 l/min THE BASIC EQUIPMENT - PLC control with touchscreen 10- Optical display for workpiece sequence- Pre-milling- Top-mounted hot melt adhesive container (interchangeable tank design / maintenance-free) with adhesive outlet device- Cross-cut saw- Milling unit- Corner milling machine- Radius scraper- Surface scraper- Cleaning station- Tools- Chip collection box (cross-cut saw)- Transport chain with permanently bolted special chains- Ball-bearing double roller top pressure- Boom (extendable to the front)- Unit viewing window from the rear of the machine and the operator's sideJoining stationWhispercut joining system with exchangeable dimensions: ø 100 x 43 mm Optional: ø 100 x 63 mmMotor power: 2 x 2.2 kWSpeed: 12,000 rpmMax. joining depth 3 mm - up to workpiece height 40 mmMax. Joining depth 2 mm - for workpieces over 40 mm. Optimal cutting edge utilization through separate manual height adjustment of the joining heads. ADVANTAGE - No more resharpening of the heads, only replacing diamond cutting edges. - No more readjustment in the machine necessary. - Only one set of joining heads required. - Lightweight aluminum construction makes it easier on motors. - Height adjustable for optimal cutting edge utilization. Glue pot interchangeable design. The proven Hebrock glue pot technology includes: - Peak heating times of the glue pot; your machine is ready for operation within 6 minutes! - A special Teflon coating, making cleaning your glue pot child's play. - Convenient and easy changing of your glue pot, thanks to quick-release fasteners on the electrical and pneumatic components, so a change is possible in under a minute. - Filling capacity 1 kg. Glue changing device. The glue changing device integrated in the machine makes changing glue types or colors easy. Simply press the button stored in the program to heat up to reach the outlet temperature, then Manually open the outlet using a slider and let the glue pot drain. Then refill the glue pot with new granules and achieve perfect results. Pressure zone: These 4 pressure rollers exert optimal pressure on the glued edge thanks to their spring-loaded mounting. Thanks to their coating, they are also easy to clean from adhesive residue or dirt. The stable construction of the mitre saw with linear guides enables precise sawing of the workpiece. Front and rear power: Version: 1 x 0.37 KW, speed 12,000 rpm. Milling station: This all-rounder in the field of edge processing offers the option of switching between the processing methods: radius / cha Febujwhwp Sj Shhysgb

Condition: used, Bohreraufnahme : Zweibackenfutter Drehzahlen : 2840 U/min Bedienung : Zweihand Betätigung der Höhenverstellung : manuell Ablesen der Höhenverstellung : Skala Spannzylinder : 1 Stk Spannzylinderbetätigung : Handexzenter Motorleistung : 2 PS Fobsucamxeu Shhyjgb

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Fgobu Shhefzbqysyeb Vacuum at nominal flow rate 3,000 Pa Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Weight net 1,040 kg

Year of construction: 2019, Condition: used, Element length max: 12.000 mm Element width max: 3.800 mm Element thickness max: 500 mm Moulding aggregates: 1 Fgsbov S D D Sju Shhyjb C-axis: Yes 5-axes technology: Yes HOMAG Flex 5 interface: Yes Main motor power: 18,5 kW Tool changer: Yes Tool changer positions: 12 Saw aggregate: Yes, C-axis Framing station: Yes Number of tables total: 2 WEINMANN BUILDTEQ A 550: Yes WEINMANN BUILDTEQ A 570: Yes Outfeed table: Set-up table Reversing table: Yes WEINMANN SCHMETTERLINGSWENDER: Yes Scribing: Yes Workpiece probing: Yes Arrangement: Horizontal Control: Homag powerTouch, HOMAG POWER CONTROL PC 86 Software: SCHULER MMR PROFESSIONAL, HOMAG WOODSCOUT, WEINMANN WUPEDITOR, WEINMANN WUPVIEW, WEINMANN WUPWORKS, MICROSOFT WINDOWS 7 Conformity marking: CE mark

Condition: new, Year of construction: 2024, Functionality: fully functional, working width: 1,600 mm, total width: 5,800 mm, total height: 4,280 mm, total length: 21,234 mm, overall weight: 15,000 kg, type of input current: three-phase, input voltage: 380 V, warranty duration: 6 months, Complete new bakery line for Flate bread as Pita bread and Naan bread, complete information in the attachements Febu Shheui Ipnoysgb

Condition: used, Year of construction: 2008, Underfloor painting system with return air ceiling and heating coil. Exhaust air unit, air volume: 6,000/3,150 m³/h. Motor: 2.7/0.7 kW. Supply air unit, air volume: 7,300/3,650 m³/h. Motor: 0.46/2.2 kW. Heater: PWW 80/60°C / 84 kW. Storage location: Nattheim Fsbu Sjvwaukshhysgb

Condition: used, Year of construction: 2017, machine/vehicle number: 1271, max. Anleimerstärke : 2 mm min. Werkstückdicke : 10 mm max. Werkstückdicke : 40 mm min. Werkstücklänge : 180 mm Vorschubgeschwindigkeit : 7 m/min Aufheizzeit : 4 min Fügeaggregat : Ja, mit 2 Fräsaggregaten Fügewerkzeug : Dia-Wechselplatten-Fräser Verstellung des Einlauflineals : manuell Kappschere bis : 2 mm Einzelzuführung der Kante : möglich Beleimung : Leimkontaktwalze Ausführung Leimbecken : wechselbar mit Auslaufkanal Pu- Beleimung : möglich Kappsäge : Ja Fsbovniu Uou Shhyjgb Kombiaggregat Bündig/Fase/Radius : pneumatisch zustellbar Flachziehklinge : Ja, tastend Stk Aggregatenanzeige : am Display Steuerungsart : SPS Streckensteuerung Bedienung : Touch-Screen Motorleistung : 7,4 kW Fahreinrichtung : Nein Ausziehbare Rollenauflage : Ja Schutzhaube : Ja Gewicht ca. : 750 kg Absaugdurchmesser : 140 mm Laufmeter : ca. 7900

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa Fjbu Shsfydzbehyegb • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: used, Year of construction: 2016, Working dimension X: 3.100 mm Working dimension Y: 1.560 mm Working dimension Z: 170 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes Fsbu Shsv A Ainjhyogb 4th axis: C-axis BIESSE Torque C-axis: Yes Tool clamping system: HSK-F63 Tool changer positions: 22 Disc tool changer: Yes Pickup tool changer: Yes Vertical drilling spindles: 10 BIESSE Drilling aggregate BH 10: Yes Gantry machine: einseitig angetrieben Machine table: Matrix table Pendulum machining: Yes Multi-zone vacuum: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Suitable for nesting: Yes Labelling: Yes, manually Safety device: Light barrier, Bumper Interface for .dxf data: Yes Tool charge measurement: Yes Automatic lubrication: Yes Control cabinet cooling: Yes Remote control: Yes Control: BIESSE BH 660 Software: BIESSE B_SOLID Conformity marking: CE mark, EAC mark Total connection: 23 kW Weight: 3.600 kg

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Fsbu Sowhr Nmshhysgb

Condition: used, Year of construction: 2024, machine/vehicle number: L24100210, Neue Ausstellungsmaschine! Besonders schwere Ausführung mit hohem Eigengewicht für maximale Laufruhe • Besonders ruhiger und präziser Lauf dank verwindungssteifem Maschinengehäuse • Großer Guss-Parallelanschlag mit Rundstangenführung, leicht verschiebbar • Guss-Schwungräder mit Gummibelag und Reinigungsbürste •Großer Grauguss-Sägetisch, schwenkbar mit geschliffener und polierter Oberfläche • Präzise Schnitthöhenverstellung über Zahnstange mit Millimeterskala • Endschaltergesicherte Türen • Selbstbremsender Motor • Zwei Absaugstutzen Techn. Daten: Abmessungen Tisch (L x B x H) 720 x 520 x 860 mm Schnittgeschwindigkeit 1.650 m/min Gewicht ca. 240 kg Schnitthöhe max. 350 mm Schnittbreite max. 520 mm Sägeblattlänge max. 4.260 mm Sägeblattstärke min./max. 0,5 / 0,6 mm Präzisionsführung oben / unten Fgjbuswggake Shhysb Sägetischneigung 0 - 20 ° Abmessungen (L x B x H) 870x 620 x 1970 mm

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Fgjbu Sewhr Ezohhyob

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Fgebowhr Euou Shhyeb Storage location: Nattheim

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Febu Sowhr Enehhysgb

Condition: used, Year of construction: 1999, Main saw motors 18 kW each Scoring saw motors 2.2 kW each Collet opening: 130 mm Saw feed forward 5 - 125 m/min Saw feed return constant 125 m/min Cutting length rip saw: 2500 mm Cutting length cross saw: 1600 mm Collets rip saw: 4 Collets cross saw: 7 Stack height of lifting table when installed at floor level: max. 680 mm Lifting table 2500 x 1600, payload 7 tons Cross saw output 2 air cushion tables 2160 x 650 mm Intermediate table for thin panels 25/16 Main saw blade HM 450 x 4.8 x 60 Scoring saw blade HM 180 x 4.8-5.8 x 45 "Power-Loc" quick-clamping device for HS "Power-Loc" quick-clamping device for VS Fgobu Showhr Ehjhyjb Storage location: Customer

Condition: used, Year of construction: 2023, Only 466 operating hours, including cross-screw discharge and automatic magnetic separator. Drive power: 18.5 kW. Throughput: 350 - 600 kg/h. Hopper: 990 x 990 mm. Screen: 30 mm. Blades: 27. Chopper dimensions: 1050 x 1500 x 1710 mm. Chopper weight: approx. 1700 kg. Storage location: Customer. Fobu Shswhr Amjhyogb

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Storage Location: Supplier Fgebowhrvtou Shhyob

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Fsbu Shhjwhrvmsyjgb

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Fgjbjwhrvgsu Shhysb Storage location: Customer.