Year of construction: 2021, Condition: used, Special price exhibition machine Garbsen TECHNICAL DATAGeneral information Effective delivery quantity approx. 1050l/min Tank capacity 500lMaximum pressure 10bar Air outlet ½Dimensions and weights Length (product) approx. 2000mm Height (product) approx. 1500mmWidth/depth (product) approx. 600mm Weight (net) approx. 279kgElectrical data Supply voltage 400V Mains frequency 50HzPhase(s) 3Ph Power consumption electric motor 7.5kWType of current AC Noise emission Sound pressure level Lp 67dB(A) Explanation sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13Motor(s) Motor type Electric Speed 3000min¯ DESCRIPTIONCoaxial screw compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. The low compressor speed and low bearing load of the patented direct drive enable very high levels of reliability and efficiency. EasyTRONIC Micro II electronic control prevents motor overload, reduces wear, and extends the service life. Monitoring of operating hours, temperature, and overload of the motor. Control of the motor rotation direction via phase sequence relay, thus avoiding possible damage during commissioning or after a relocation. Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously dimensioned heat exchangers result in a longer service life and lower fluctuations in oil temperature. User-friendly in every detail. Low-noise, suitable for installation in any working environment. Small external dimensions make transport and installation easy. Service-friendly due to optimal accessibility and simple disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Star-delta circuit as standard. Ready to connect with all fittings. Integrated refrigeration dryer on ESH models. Greater reliability of the Compressed air system without costly downtime and production delays while ensuring product quality. Fully integrated into the housing. Ready to use without installation. Equipped with a control panel and time-controlled condensate drain.¹ Warehouse location: Garbsen Fsbvqsv Hcgneynxsgb

Condition: excellent (used), Original spacer rings 145 Ø x 86 Ø with 1 groove 16.5 mm in various widths, 1 used saw shaft 60 mm Ø with 2 wedges 16 mm wide including 1 sliding bush 120 mm effective clamping length with left-hand threaded clamping nut suitable for right-hand machine and bearing bush for front flap Fgjbswaiaajvqynxeb

Condition: used, Year of construction: 2017, Working dimension X: 3.200 mm Working dimension Y: 920 mm Working dimension Z: 70 mm Number of milling spindles: 1 Main motor power: 8 kW Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 7 Vertical drilling spindles: 13 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Vertical working surface: Yes Machine table: Feed-through technology Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 8 m³/h Special workpiece clamping system: Vacuum clamping system Safety device: enclosed cabin Milling for fittings: Lamello Clamex LAMELLO p-System: Yes Interface for .dxf data: Yes Automatic central lubrication: Yes Control: PC control Software: HOLZ-HER CAMPUS NC-HOPS, HOLZ-HER CAMPUS ACADEMY, PC office licence, HOLZ-HER CAMPUS MAKRO PAKET, HOLZ-HER CAMPUS V6 Conformity marking: CE mark Fgjbvqswd Nzroynxob

Condition: excellent (used), Year of construction: 2009, motor power 37kW capacity 4-7m3/h shaft length 1000mm Fjbjikvugevqynxogb shaft diameter 226mm weight c.a. 3t hydraulic pressure pump motor power 2,2kW

Condition: excellent (used), CATALOG NUMBER 7646 Febvqowglqhjynxogb Technical data: - max. width of the processed element 1100mm - max. thickness of the processed element 150mm - from above: - 2 rubber, sliding, pressure rollers Roller I - grooved rubber roller for calibration Roller II - aggregate + shoe - rubber, sliding roller - brakes - cleaning of grinding belts (blowers) - from below: - 2 sliding, metal, inlet rollers - pulling belt - 2 sliding, metal, outlet rollers - pneumatic belt oscillation - electric table lifting (digital measurement display) - total power 22kW - smooth speed regulation on the inverter - working pressure 6-8bar - diameter of the exhaust port 3x180mm - total dimensions length/width/height 2250x1950x2500mm - weight about 2400kg ADVANTAGES - Italian production - two aggregates - very good condition - unpainted - used grinder Net price: PLN 29,900 Net price: EUR 7,040 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)Net price 29,900,-

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, Net price: €3,650 (regular list price approx. €5,500 net) Gross price: €4,345 (regular list price approx. €6,550 gross) Fgobvqowf Nlajynxob Spänex dry extraction wall unit for sale with warranty. -Year of construction 2023 -Clean filter area 2m x 1m -1.5kW -3500m3/h -Approx. 220kg

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Hofmann TFS 2000 spindle moulder available for sale due to new purchase starting around the beginning of June. Built in 1997. 7.5 kW motor. Table length 2 meters. Fgobvewcz Afeqynxob Spindle electrically adjustable from 1000-10000 rpm. Electric spindle lock. Spindle tilts from -15° to +45°. With Aigner folding stops. With programmable speed, height, and tilt adjustment. Stop manually adjustable. With 3-roller feeder type 1117 from Holzher.

Condition: good (used), Year of construction: 2007, Fast root de-sharpening in cross-feed mode 75 kW milling shaft Including hydraulics Fgjbvqyewhdr Henxsb

Condition: like new (used), Year of construction: 2021, operating hours: 320 h, power: 18.5 kW (25.15 HP), Nearly new chipper with only 320 operating hours, being sold due to upgrading to a larger chipper. Rotor width 630 mm with double row of knives, for a total of 30 knives. Motor 18.5 kW Fgsbvqyowc Iy Dsnxsb

Condition: reconditioned (used), A completely refurbished infeed for Resaw in excellent condition Febvqyshpyakonxjgb

Condition: as good as new (ex-display), Functionality: fully functional, As good as new. Only used for testing purposes (4-5 running hours). Production capacity: Up to 70 kg. per hour. Year: 2017. Febvqynou Ra U Isxsgb 50 hz. Made in Italy. We ship all over EU.

Condition: good (used), Equipment: motor brake, Net price: €2,750 Refurbished 63mm planer for sale. Febvqynjwf Nkiexogb New star/delta switch Table length: 3,050mm Table width: 630mm Motor power: 3.5kW Planer block: 4 planer knives (new) Housing freshly painted and machine greased (very smooth running)

Condition: not inspected (used), Year of construction: 2003, Functionality: fully functional, Heavy-duty Stratoplan planer with 6 spindles. Year of manufacture: 2003 Feed rate: 30 m/min to max. 300 m/min. Spindles: U/T/R/L/U/T Working height: 17 mm to max. 120 mm. Working width: 50 mm to max. 300 mm. Supplied with infeed table (accelerator) and cross conveyor. 6 sets of tools. Table height: 1,100 mm Fsbvswhdnboqynxegb Working width: 50-300 mm Working height: 17-120 mm Feed rate: 30-300 m/min Control system: Siemens S7 Connected load: 390 kW

Condition: new, Net price: €4,900 Febswf Nd Njvqynxjgb -Including table extension (folding) -Including parallel stop -Including crosscut stop The ZBV 500-S is a height- and angle-adjustable construction site table saw with a 500 mm saw blade. The ZBV 500-S also enables bevel cuts with high cutting heights on the construction site. This makes it ideal for processing the increasingly popular insulation material in conjunction with the AVOLA special HM/A/PH circular saw blade (see above). Motor power P1/P2*: 6.4 / 5.0 kW Power supply: 40 V Frequency: 50 Hz Device plug: 532CEE Saw blade diameter/bore: 500/30 mm Cutting height 90° / 45°: 0-170 / 0-120 mm Incline adjustment: 90°-45° Table size length/width/height: 1223/850/850 mm Weight: 210 kg

Condition: new, power: 7.5 kW (10.20 HP), Equipment: scorer, Net price: €11,990 -Scoring unit Fobvqewf Ndcsynxsgb -Saw blade tilt and height adjustment are manual -Cutting height 200mm -Scoring unit with separate drive motor -Main saw blade with belt drive and speeds of 2800/3665/4800 rpm -High weight ensures vibration-free operation -Large outrigger table with material roll, parallel stop with round bar guide -Extendable aluminum rip stop with two folding stops -7.5 kW main motor mounted on a robust cast iron frame -Four-bearing sliding table made of anodized aluminum with high torsional rigidity -Multi-position locking on the sliding table. Comes standard with table extension and table extension made of heavy-duty sheet metal -Large pendulum guard can be easily raised using a gas spring -Saw blade clamping via tool-free Rapid system +Connection Extraction Extraction nozzle diameter: 120 mm Extraction nozzle diameter of saw blade guard: 80 mm +Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Power input: 8.3 kW Power output: 7.5 kW +Sliding carriage and table Format sliding carriage length: 3200 mm Format sliding carriage height: 890 mm Table height: 890 mm +Circular saw unit Cutting width with parallel stop: 1450 mm Max. cutting width to the left of the saw blade: 3200 mm Saw blade inclination: 90 – 45° Max. cutting height 90°: 200 mm Max. cutting height 45°: 140 mm Saw blade diameter: 550 mm

Condition: new, Net price: €3,990 Roll diameter D = 640 mm Saw blade length 4780 mm Work table 870 x 620 mm Max. cutting height 400 mm Fgobvjwf Nb Isqynxob Max. cutting width 620 mm Saw table inclination 0 to 15° Motor 2.2 kW / 400 volts Weight approx. 320 kg

Condition: new, : For sawing, milling, surface planing, thicknessing, and optional mortising : Sturdy cast-iron steel construction : 1600 mm sliding table made of anodized aluminum for maximum cutting precision : Precise and comfortable cuts even with large workpieces thanks to the stable support on the 270 mm wide sliding table : Robust, ribbed cast-iron work tables : Pivoting saw blade from 90° - 45° : Trimming frame with telescopic aluminum crosscut stop and a folding stop for panels and large workpieces : Planing unit comes standard with the TERSA quick-change system with three planer knives : Helical-toothed steel feed roller for consistent workpiece feed during thicknessing : Three milling speeds, manually adjustable from 3,600 - 10,000 rpm : Three independent industrial motors : With lockable main switch Motor protection switch, emergency stop switch Fgobvswf I Ruoqynxsb : Aluminum sliding table Equipped with a ball contact system proven thousands of times Permanently smooth running Resistant to dust and dirt thanks to minimal contact point between the ball and the trapezoidal rail 10-year Holzkraft guarantee against wear on the guideways Space requirement: Length 3859 mm Space requirement: Width/Depth 2793 mm Explanation of space requirements: The dimensions take into account maximum travel distances or usable lengths. Machine body: Length 802 mm Machine body: Width/Depth 960 mm Working area: Length 1600 mm Working area: Width/Depth 2300 mm

Condition: good (used), Bäuerle PKS mobile pendulum circular saw with a braked 5.5 kW motor. Febjwf I I Tevqynxegb Net price: €4,200 - Cutting height 125 mm - Rewound motor - 5.5 kW (braked) - Pivoting - On a mobile base You will receive an invoice with VAT shown. Shipping via freight forwarder is possible. Price is ex-works, Haldensleben.

Condition: excellent (used), Net price: €3,350 Makita 5500s tenon cutter in near-new condition. Fgobvewf I Aqjqynxeb You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price excludes VAT, ex-works Haldensleben.

Condition: used, Year of construction: 2000, Functionality: fully functional, Equipment: motor brake, Combined planer/thicknesser from Robland (Belgium) Net price: €5,750 - 4-knife planer block including spare knives - Operating instructions - Setting gauge - Electrically movable thicknessing table - Digital thicknessing table display - 5.5 kW braked motor Fgjbvqewf Iwbeynxob - Checked and properly adjusted You will receive an invoice with VAT shown. Shipping via freight forwarder is possible. Price is ex-works in Haldensleben.

Condition: new, Altendorf F25 demonstration/exhibition machine at a special price of €11,900 net. BASIC EQUIPMENT: Febvjwf Iutoqynxsgb • Manual height and tilt adjustment 0–46° of the saw blade, with digital display • Double sliding table, carriage length 3,200 mm • Crosscut miter stop, cutting to lengths up to 3,450 mm • Saw blade diameter max. 315 mm, saw blade projection max. 104 mm • Cutting height 100 mm, 70 mm at 45° • Machine height 880 mm OPTIONAL EQUIPMENT: ▶ 5.5 kW (7.5 HP), 2 speeds ▶ DIGIT X parallel stop, 1,000 mm* ▶ Large extraction hood (PSV) ▶ Scoring unit with LED lighting ▶ Front support roller F25 ▶ Template holder F25 You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price is ex warehouse Haldensleben.

Condition: new, Year of construction: 2023, Net price: €5,750 New HEMA Garant 600 ...fully equipped with special upper and lower roller guides, with mechanical height adjustment of the guide rod, pivoting table, vulcanized band saw wheels, motor protection switch, and dust extraction nozzle. Roller diameter, mm: 600 Fgjbvewf Itisqynxsb Motor power, kW (HP): 2.2 (3) Cutting speed, m/min: 1,550 Cutting height, mm: 355 Cutting width, mm: 565 Blade length, max. mm: 4,500 Weight, kg: 280 You will receive an invoice with VAT. Price is gross ex Haldensleben warehouse. Shipping by freight forwarder is possible.

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Eumacop ER 600 band saw with APA precision guide. Fgsbvjwf Iq Isqynxob Technical details are shown in the last photo. You will receive an invoice with VAT. Shipping via freight forwarder is possible. Price is ex-works, Haldensleben.

Condition: used, Year of construction: 1999, Functionality: fully functional, power: 5.5 kW (7.48 HP), Equipment: scorer, Net price: €3,300 Panel saw with various accessories from Robland. -Front support roller -Scoring unit -5.5 kW motor -Saw blade pivots up to 45°* -Large extraction hood -3200 mm carriage length -1400 mm cutting width -Year of manufacture: 1999 -Side trimming shoe -400 mm saw blade possible (500 mm without scoring unit) -Clamping lever for clamping the workpiece You will receive an invoice with VAT. Shipping via freight forwarder is possible. Fgobswf Ip Rsvqynxeb Price is ex-works in Haldensleben.

Condition: used, Functionality: fully functional, planing width: 630 mm, number of planer blades: 4, MAKA thickness planer with Centrofix knife cutterblock. -Motorized thickness table adjustment -Numerical counter for planing thickness -7.5 kW motor -Centrofix (quick-change system similar to Tersa) -630 mm planing width Fjbvqynewf In Hoxegb -Infinitely variable feed You will receive an invoice with VAT shown. Shipping via freight forwarder is possible. Price is ex-works in Haldensleben.