Condition: new, Year of construction: 2021, Compact horizontal unit with two tool outlets for Clamex machining (P14) within the center of the surface -For Clamex machining (P14) within the center of the surface Fgob Hnowb Eg Se Upysb -For drilling and milling Technical specifications: Max. input speed: 8000 rpm Max. output speed: 12000 rpm Gear ratio i=1:1.48 Max. torque Mt= 15 Nm Permissible operating temperature: 85° Unit can be rotated 360° around the drive axis

Condition: used, Year of construction: 2013, Workpiece width max: 450 mm Workpiece thickness max: 300 mm Workpiece length max: 12.000 mm Crosscut height: 300 mm Aggregates total: 6 Positioning cart: 2 Fjb Hn Usvkih Hopysgb Number of sawing aggregates: 1 Drilling aggregates: 2 Number of milling aggregates: 3 Shark cutter: Yes 4-side milling aggregate: Yes Cross-groove for log house corner-joints: Yes Saw for shifter cuts: Yes Flipping device: Yes Printer: Yes Labelling: Yes Workpiece feed: Log carriage HUNDEGGER UF 4 Universal milling aggregate: Yes Control: PC control Weight: 16.000 kg Space requirement Length: 31,5 m Space requirement Width: 7 m

Condition: excellent (used), Year of construction: 2018, Used Weima Briquetting Press C 150 - 64 operating hours - As good as new Fjb Hnowavgyj Upysgb Pictures of the press will follow in the next few days. Accessories: Automatic on/off Your Benefits Sturdy press mechanism with low-wear, chrome-plated clamps Press chamber wear bushing Pre-compressor with cushioned cylinder and screwed cover Control box with PLC control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounted on a stable base frame with rubber feet Briquette length monitoring Robust construction, low-maintenance technology, and minimal space requirements: The C-Series machines are particularly suitable for small and medium-sized businesses whose required throughput does not exceed 50-80 kg/h or 200-400 kg/day. Virtually any suitable material can be briquetted, such as wood, Styrofoam, foam, paper, or biomass. All machines are available in left- or right-hand versions. Mounting on a sturdy base frame ensures quick installation and enables mobile use. Briquette diameter (mm) 50 Throughput up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5.50 Screw motor (kW) 0.55 Oil volume (liters) 100 Weight (approx. kg) 800 Outstanding features at a glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for long operating times Briquette length monitoring: Regulates the briquette length to a consistent level Pressing chamber wear bushing: Prevents wear in the pressing area Location: From stock, 54634 Bitburg - available immediately -

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, cutting length (max.): 3,300 mm, cutting width (max.): 1,350 mm, cutting width at rip fence: 1,350 mm, cutting height (max.): 170 mm, saw blade diameter: 500 mm, table length: 3,300 mm, total length: 3,300 mm, main saw diameter: 500 mm, height adjustment type: hydraulic, overall weight: 1,300 kg, extraction nozzle diameter: 125 mm, type of motor: three-phase motor, slide length: 3,300 mm, table width: 1,350 mm, type of input current: three-phase, power: 5.5 kW (7.48 HP), Equipment: scorer, Martin T72A sliding table saw, in very good condition, from a one-man operation. Fully equipped. Hydraulic lifting and tilting with digital displays. Width stop adjustable with handwheel up to 1350 mm, foldable. Crosscut stop up to 3500 mm with digital displays. Fsbowg Tn Is Hn Upyogb Aluminum cross-cut table angle adjustment with digital displays, continuously adjustable from -45 to +45 degrees. Additional second support table for hanging. Front table support foldable. Counter-angle stop on the crosscut guide up to 180 degrees. Sliding table length 3300 mm. Saw blade up to 500 mm. Cutting height 170 mm. Scoring device adjustable from the outside, continuously adjustable. Various saw blades. Forklift available. Can be viewed while still in operation. Price €8,200 plus VAT.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 4892/1-902, saw blade diameter: 250 mm, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, cutting depth: 55 mm, input voltage: 400 V, saw blade bore: 30 mm, For sale is a Holzher Sector 1255 Pro vertical panel saw. It features automatic pneumatic locking and digital stops. It has the usual signs of wear but functions perfectly. Fsb Hswhaqljn Upyjgb The machine has been disassembled and is ready for shipping.

Condition: excellent (used), Year of construction: 2014, Working range: X-axis: 3280 mm Y-axis: 1620 mm Z-axis: 245 mm Feed speeds: X-axis: 80 m/min Y-axis: 60 m/min Z-axis: 20 m/min Fgjb Hswhypnon Upyjb Vector speed: 100 m/min Electro spindle: HSD 5 axes 11 kW with continuous 360° rotation on B and C axes, enabling machining of complex shapes with high precision liquid cooled Drilling head: HSD  20 vertical spindles 4 horizontal grooving saw in X-axis grooving saw in Y-axis Working table:  6-piece beam 4 suction cups on 1 beam preparation for uniclamp Tool magazines: 16-position turret magazine Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring a firm clamping of workpieces during machining Software: bSolid

Condition: new, Year of construction: 2024, New dust extractor Year of construction 2024 Technical data: Certified according to BGHM H3* / CE / GS Power consumption 2.2 kW Current consumption IE2 4.4 A Filter area 9.5 m² Dimensions 1575 x 910 x 2110 Dust garbage can volume 1 x 160 l Weight 405 kg Intake connection 160 mm, right Operating volume flow: 2300 m³/h Volume flow max/nom. 1780/1447 Negative pressure at nominal volume flow 2450 PA Negative pressure in front of the fan at VNenn 3160 PA Maximum sound pressure level 74 dB(A) Filter regeneration pneumatic max. 7.5 bar Operating mode: Continuous operation Fsb Hjqv Iazon Upysgb Compressed air connection must be available Availability: short term Storage location: Hochheim

Condition: good (used), Functionality: fully functional, machine/vehicle number: 6220, working width: 300 mm, Quickwood QL3 Top and Bottom Twin Heads Brushing Machine. Serial No: 6220 300m/m Width Capacity. Very good condition. Some spare brushes. Photos available on WhatsApp. Location: Burrowbridge, Somerset TA7 0SG UK Fjb Hn Upst Nf S Ujyegb

Condition: used, Year of construction: 2021, Flow rate: 7.697 m³/h Intake socket: 250 mm Filter surface: 50 m² Fjb Howd Slajn Upyjgb Number of collection boxes: 2 Underpressure: 3.875 Pa Length of filter hose: 2.000 mm Main motor power: 11 kW Machine recognition: Yes Extinguishing automatic: Yes Air system: Underpressure Automatic cleaning: Jet- cleaning Category of filter material: H3 Declaration of CE-conformity: Yes Conformity marking: CE mark

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 160 mm, grinding belt length: 1,900 mm, SCM Sandya 10 2-Belt Sander Very good condition from a one-man operation Fgob Hn Uswg Tpljpysb Factory overhauled with new carpet 8 years ago Sanding width 1100 mm, sanding height 160 mm Steel roller for calibration Combination unit with rubber roller and shoe for veneer and solid sanding Viewing possible while still in operation. Negotiable price €6,200 plus VAT

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Fgob Hn Ujtq Hkrspyeb Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: - 2 x rotary table tool magazine with 20 places. Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen.

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Features and technical specifications: Suitable for thick solid wood and laminated panels Trimming length: 2250 mm Max. saw blade diameter: 315 mm With mounted scoring unit Max. cutting height at 90° / 45°: 100 / 80 mm Cutting width at the parallel stop: 900 mm Motor: 4 kW Stable support thanks to a 270 mm wide sliding carriage and trimming frame Shipping dimensions: 230 x 95 x 130 cm Weight: 370 kg Availability: Short-term Feboufufzs Hn Upyjgb Location: Flörsheim

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 0000002111, travel distance X-axis: 2,438 mm, travel distance Y-axis: 1,219 mm, Equipment: rotational speed infinitely variable, Machine in 'A1' Top Working Condition. 8' x 4' Flat Vacuum Table. 12 Position Tool Changer. Drilling Bank. Auto Oiling System. Fully Side guarded. c/w Operators Manual Can be viewed working. Location, n'r Oswestry, North Wales border. Fgsb Hn Upjvrdn Reysb To take out, load & deliver ask us for a quote from a specialist machinery mover. Photos & Working Video available on WhatApp, send your mobile number with your enquiry.

Condition: used, Year of construction: 2015, Cutting length: 4.500 mm Width of lifting table: 2.200 mm Number of grippers: 9 Feedrate max: 140 m/min Continuously variable feed: Yes Panel thickness min: 10 mm Saw blade projection: 95 mm Saw blade diameter max: 380 mm Main motor power: 15 kW Scoring saw: Motoric adjustment BIESSE DigiSet: Yes Groove cutting function: Yes Lift table: loading from behind For sensible workpieces: Clamping pressure adjustable Stop side: Left Feb Howd Si Sen Upyegb Optimization: Yes SELCO QUICK OPTI: Yes PC office licence: Yes SELCO Quick Change: Yes SELCO Side aligner: Yes Head aligner: Yes SELCO Discharge unit for thin boards: Yes Control: PC control, BIESSE OSI PLUS Conformity marking: CE mark Total connection: 33,5 kW Weight: 8.060 kg Space requirement Length: 10,28 m Space requirement Width: 6,65 m

Condition: good (used), Year of construction: 1998, Functionality: fully functional, MAKA ECM 27 R Year of manufacture: 1998 - High-performance CNC milling center for 5-axis machining, ideal for machining aluminum and for mold making. - MAKA ECM 27 R in portal design. - Equipped with automatic central lubrication and control cabinet with air conditioning unit. - CNC control BWO 900C, memory 1 MB, in integrated PC. - Portable control panel BWO RC 910. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 40 m/min. Z-axis: 15 m/min. A/B axis: 10,000 °/min. 1 milling spindle 11 kW, Speed infinitely variable from 2,000 - 17,000 rpm, With ceramic bearings, liquid cooling. SK 40 tool holder with tool changing device. 1 chain tool magazine for 12 tools up to Ø 160 mm, including 2 for holding an angle drill head (fixed position coded), SK 40. 1 steel surface table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m²/h, with 250 liter tank. 1 piece vacuum clamping circuit. Work safety: With safety cabin for the rear of the machine, side access door, the cabin is open at the top. Slatted curtain on the operator side and safety bumper on the front of the table. Repairs / renewal before delivery: - Maintenance. Connected loads: Voltage: 400 V (max. +/- 5%), frequency: 50 Hz Rated power: 22.5 kW The use of an RCD in the machine supply line is not possible. Operating temperature: 10 - 35° C Pneumatics: 6 bar, approx. 10 m³/h Tool holders and processing tools are not included in the scope of delivery. Used machine, without any guarantee or warranty. Optional: Fjb Hn Ujt Dl U Eepyjgb incl. installation and commissioning with production-ready handover!

Condition: used, Year of construction: 2019, Used machine Year of construction 2019 Technical description: With saw blade that can be tilted on both sides +45.5° to -45.5° Operation: 5.7" touchscreen on the machine body Solid German engineering For trimming, cutting to length, sizing, mitre cutting etc. Dimensionally stable and self-supporting machine body manufactured as a stable welded frame construction made of thick-walled steel profiles and laser-machined sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is mounted on the machine body Fob Houvab Dsn Upyjgb The robust and powerful saw unit built into the machine body guarantees precise saw cuts The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment and the double ball-bearing circular saw shaft ensure absolutely smooth running The double roller carriage is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided in hardened and ground steel guides Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side and Quick-Lock mounts for the ALU length stop profile, can be used on both sides Length stop profile on the cross slide with mm scale and magnifying glass, telescopic extension, extendable up to 3200 mm, incl. 2 robust and play-free stop flaps Table extension 775 x 330 mm on the cast table worktop incl. pull-out tool drawer Width stop with cutting width 1250 mm to the right of the saw blade with fine adjustment, easily adjustable and fixed manually, dimension display via Digit-PAB, digital wireless absolute measuring system in swivel-mounted display box, 0.1 mm adjustable with stored changeover dimension for fence rail high/flat Touchscreen control with 5.7" display Positioning control for height and tilt adjustment, optional axes: width stop, scoring saw with lateral and height adjustment incl. scoring position on the right, calibration device, program memory for 25 programs, tool management for 9 different saw blades. The specified data can be used to store and retrieve the saw blade Ø, log blade, cutting width and max. speed. Speed regulation in steps of 100 Swivel range of the saw blade from +45.5° to -45.5° APA saw blade quick clamping system Automatic length adjustment from the saw blade to the width stop. If the fence is manually adjustable, a graphical representation appears on the display. Enter the values for cutting width and angle, the length is calculated automatically, the value is displayed on the control unit and the rip fence can then be easily adjusted. With the motorized width stop, the length is calculated automatically. Operating hours counter for the order-related working time and for the total running time, in German and English Infinitely variable speed regulation from 1000 - 6000 rpm, for safety with an automatic speed limiter from a saw blade Ø of 400 mm Swing-away guard with rotating protective cover for saw blades up to Ø 500 mm Automatic star-delta start and automatic motor brake Cutting height max. 172.5 mm at 90°, 120 mm at +45.5°, 90 mm at -45.5° Length stop on cross slide extendable up to 3200 mm Roller carriage, length and width stop

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: FSL-62H-FJ-420A, feed length X-axis: 1,400 mm, feed length Z-axis: 180 mm, table width: 1,400 mm, tine length: 9,500 mm, workpiece height (max.): 180 mm, Furnimate Semi-Auto Finger Jointing Line, new 2019, very good working condition. Model: FSL-62H-FJ-420A Will accept Lengths from 300 to 1400m/m, x up to 180m/m high. Finger joint Unit with Cut off Saw, Scoring Saw & Profiling Unit for the Finger jointing operation. Auto feed with conveyor to Glueing and pressing unit, will take timber jointed up to 4500m/m long x 1400m/m wide. Gluing Press with Auto ejection of the glued panel. Show your mobile number for images on WhatsApp. Can be demo'd working in Sheffield, Yorkshire UK. Fgeb Heuaf Rdsn Upyob Full documentation available. Photos etc, available on Whats App & email. Price ex. works, dismantled & loaded buyers transport: £35,000.00 + Vat if applicable, or Euro 42,000.00 ( make an offer as well )

Condition: good (used), Year of construction: 2000, MAKA KPF 334R Year of manufacture: 2000 Fob Hn Upsir Aq Tjyogb Compact design with control cabinet integrated in the base frame. CNC control BWO 900C, memory 1 MB, in integrated PC. Technical data: Working areas / cube dimension: with tool length 130 mm and -Ø 60 mm X-axis: 1.000 mm Y-axis: 1.000 mm Z-axis: 300 mm, with 120 mm fixture height A-axis: 540 B axis: 200° (+/- 100°) Rapid traverse speed: X/Y axis: 45 m/min. Z axis: 15 m/min. A/B axis: 10,000 °/min. 1 piece high-speed milling spindle HSD 6,8 kW, speed infinitely variable from 2,000 - 24,000 1/min, nominal power from 12.000 1/min. With ceramic bearings, air-cooled. Tool holder SK 30 with tool changing device. 1 piece travelling drum tool magazine for 10 tools up to Ø 60 mm and - depending on the tool diameter - 130 mm length from face contact. Aluminum table top 1.000 x 1.000 mm with grid holes 1 piece vacuum pump 54 m²/h, 1 x vacuum clamping circuit Automatic central lubrication, control cabinet with air conditioning unit. Working safety: Sliding door for front loading, protective cabin for the rear of the machine, with side access door, the cabin is open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz. It is not possible to use a residual current device in the machine supply line. Operating temperature: 10 - 35° C Pneumatic: 6 bar, approx. 18 m³/h Tool holders and machining tools are not included in the delivery. Second-hand machine, without any guarantee and warranty.

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 table machine the zig-zag thread used as an adhesive medium is glued on from below automatic thickness and tolerance compensation for sized veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm 230 V electrical connection Stand projection 700 mm Material feed approx. 6 m/min. Fgebekwhqxe Hn Upyeb Weight approx. 54 kg Availability: short term Storage location:Hochheim

Condition: good (used), Functionality: fully functional, working width: 1,300 mm, Superfici MV40 1300m/m wide Double Roller Coating machine, complete with 2 UV Quick Drying Lamps. In good working condition. Location to view : Burrowbridge, Somerset. TA7 0SG UK. Price ex works: £3,000.00 + Vat or 3600.00 Euro Fgjb Hnst Uqy Ue Upyjb Price includes loading buyers transport. Photos available on WhatsApp.

Condition: new, Year of construction: 2022, New machine Year of construction 2022 Suspended control panel with Siemens control and 10" large touch display Control of the saw blade height/inclination and positioning of the rip fence via the control panel Max. Cutting height 200mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ Fgebskwhq Re Hn Upyob High dead weight ensures vibration-free operation Large outrigger table with material roller Extendable aluminum longitudinal fence with two folding fences and digital position indicator 7.5 kW main motor mounted on a robust cast iron frame Format sliding carriage with four bearings made of anodized aluminium with high torsional rigidity Multiple locking mechanism on the sliding table Table extension and table extension made of thick sheet metal as standard Large pendulum guard can be conveniently raised using a gas pressure spring Saw blade clamping via tool-free Rapid system Location: Hochheim Availability: at short notice

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: AE700472 Ref: 111810, working width: 1,350 mm, 1350m/m Wide Belt Sander with 3 Sanding Rollers Calibrating and Sanding machine In very good condition. Electronic Control Unit. Capacity 1350m/m wide. Very good HP. With at least 5 boxes of Cloth Backed Sanding Belts 40/60 & 80 Grit. Price of STG £15,000.00 Includes loading buyers transport. Location: Burrowbridge, Somerset TA7 0SG UK Photos available on WhatsApp Fgsb Hn Upjt Iwgueyeb

Condition: used, Year of construction: 2019, Used machine Year of construction: 2019 Equipment and technical data: Technical description: Cutting height: vertical 2,150mm, horizontal 2,070mm Cutting length: 5,300 mm Cutting depth: 80 mm Saw blade: diameter 303mm, bore 30mm, Z=60 hollow roof tooth Saw blade rotation: 5,000 rpm Motor: 5.5 kW Required air pressure: 6 bar Dimension readout for: horizontal saw cuts: via scale and via strip cutting stop Vertical saw cuts: via scale from 0 - 1,300 mm Suction nozzle: 100mm Equipment features: -5 material support rollers, per meter of cutting length Feb Hnjkwhg Ij Upysgb -1 infeed and 1 outfeed roller -pneumatic workpiece clamping device between between the support rollers -1 center support element, per meter of cutting length Torsion-free, free-standing machine frame -pneumatically deflecting slatted frame -Round bar guide vertical and horizontal -fine adjustable folding fence -Fine adjustment for horizontal saw cuts via handwheel -Strip cutting fence -Manual programming rail with 5 sliding blocks -Pneumatic immersion of the saw unit -Pneumatic saw head blocking -Switch unit on the saw unit: start button, stop button -Control panel with template holder Incl. electric digital display for the saw unit Incl. electronic digital display for the folding fence Incl. Automatically swiveling saw head Original price 37930. Availability: short term Storage location: Hochheim

Condition: used, Used machine Veneer jointing machine Machine number 1262050 Motor power 2.5 HP Engine speed 2810 rpm Cutting length 3100 mm Saw blade diameter 180 mm Fgsb Hn Upokwhadsyeb Rear support board missing Movable Transport dimensions approx. 3700 × 700 1450 mm Weight approx. 200 kg Availability: approx. end of July Location: Cologne

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: Functionally tested Technical specifications: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0-25 m/min. Y-axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0-50 m/min. Z-axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0-20 m/min. The minimum and maximum workpiece sizes depend on the weight and the length-to-width ratio! Units: Milling unit with 4.5 kW motor (frequency-controlled) including MASTERWORK software extension Speed: 1,000 to 18,000 rpm including integrated extraction control (only the drill head is vacuumed during drilling, only the milling unit during milling) 4-station tool changer for ISO 30 taper 16 mm drill head: Vertical spindles in X direction: 5 Vertical spindles in Y direction: 5 Horizontal double drilling spindle in X direction: 2 + 2 Horizontal double drilling spindle in Y direction: 1 + 1 Drill spindle spacing: 32 mm Drill spindle speed: 4,000 rpm Motor: 1.7 kW Grooving saw: in X-direction Speed: 4,000 rpm Max. saw blade diameter: 125 mm Motor: 1.7 kW (The grooving saw is integrated into the drill head) Program: MASTERWORK MACHINE VERSION Fsb Hn Ujwb Eg Eopyogb Additional data: Required air pressure: 8 bar Air consumption: max. 750 l/min. Extraction: Volume: 2,000 m³/h Air speed: 25 - 30 m/sec. Extraction nozzle: 1 x 150 mm Other features: - Air tables in the work area - Roller table in the infeed and outfeed - Sensor for plate measurement - Ball screw and linear guides - Rack and pinion drive - Central lubrication - Import of DXF files Machine dimensions: 2100 x 2410 x 1510 mm Weight: approx. 1300 kg Required air pressure: 8 bar Air consumption: max. 750 l/min. Extraction: Volume: 2000 m³/h Air velocity: 25 - 30 m/s Extraction nozzle: 1 x 150 mm Availability: Short term Location: Hochheim