Used cNC lathes over 1000mm turning diameter for sale (74)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The used, FULLY REFURBISHED self-learning CNC lathe GEMINIS GHT4 720X3000 is a robust, medium-large parallel bed lathe equipped with FAGOR 8055 CNC, center height 360 mm, distance between centers 3000 mm, spindle bore 106 mm. Nwjdpfx Aoxdvbcjd Hop The machine is COMPLETELY REFURBISHED AS NEW, including bed grinding, carriage grinding, Turcite overlays, spindle bearings, axis bearings, axis screws, electrical system, motor overhaul, new drives, new FAGOR keyboard, etc. The equipment is completed with prearrangement for automatic turret, manual self-centering chuck, and 2 steadies.

Condition: good (used), Year of construction: 2013, Manufacturer: Pro King Type: LC 450 Control system: Fanuc Oi-TF Year of construction: 2013 Specifications: Metric Metric US Standard Max. turning diameter 1135 mm X-axis 560 mm Z-axis 2000 mm Spindle bore 153 mm spindle speed 700 rpm Spindle power 37 kW Tool changer 12 Chip conveyor Yes Quill holder 6 Mk Nwsdpfx Ajtwlm Ned Hop Quill Ø 235 mm Dimensions (estimate) length 6500 mm width 3200 mm height 2900 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 960 mm, turning length: 10,000 mm, turning diameter: 1,300 mm, spindle bore: 160 mm, Lathe Wohlenberg model M 1000 BSN in excelent condition. Machine were retrofited with Siemens 802. Nodpfx Adsxprrbs Hjwp Machine is under power and it can be tested.Two steady rest

Condition: used, turning diameter over slide rest 800 mm Control Siemens 802D swing diameter 2000 mm Nedpfxov H Etds Ad Hswp centre height 1000 mm

Condition: excellent (used), Year of construction: 2006, Center width 11000 mm Center height 450 mm Cross slide 700 mm Max. Workpiece weight 12t Headstock power 51/56 kW Headstock speed 0-166 / 0-800rpm Gear stages 2 Nwedew A Naxspfx Ad Hsp Headstock DIN 55026- A11 Headstock through hole 150 mm 2 longitudinal slides with max. feed rate 8 m/min 2 cross slides with max. feed rate 8 m/min 2 manual tool holders size 300 4 positions Accessories: - Face plate 700 mm - Chip conveyor with coolant tank - 3 closed steady rests - 2 open steady rests c-type - 1 steady rest with faceplate 600 mm

Condition: used, Year of construction: 2008, turning diameter 1000 mm swing diameter 1250 mm turning height 500 mm control Siemens Sinumerik 840 D Workpiece spindle flange diameter 520 mm work piece spindle speed range 0-440 U/min total power requirement 75 kW weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm With grinding spindle Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Equipment/accessories: Nedpow Rgcfefx Ad Hjwp - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 925 mm, turning length: 2,800 mm, turning diameter: 1,200 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, CNC Siemens 840D 48-tool changer, Capto C8 tools chip conveyor Forkardt 400MM chuck, 2 hydraulic steady rests SMW Autoblok capacity 2800x1250MM, spindle bore 132MM Njdpjwzyn Rofx Ad Hswp weight 23,500 kg

Year of construction: 2002, condition: good (used), - Make : Skoda Pilzen - Type : SIU 250 - Age : 1979 - No : Ob 21776 - Swing over bed : 2,500 - Swing over support : 2,000 - Centre distance : 10,000 - Bed width : 3,750 - Workpiece weight : 100,000 Kg - Flying in chuck : 25,000 Kg - 4 Chuck Ø : 2,500 mm - Out clamping Ø : 1,900 mm - Min clamping Ø : 500 mm - Diam. Ø pinole : 560 - Mk 1 : 10 : 160 - Stroke : 250 - Travelling speed : 0 – 2,000 mm/min. - Power 120 kW - 1e : 0,32 – 7,1 - 2e : 0,8 - 18 - 3e : 2,12 – 47,5 - 4e : 5,6 - 125 - Incl. 3 x Steady rest 2 x closed & 1 open - 1ncl. 2e support Nedpskwcpmofx Ad Hjwp - BOSCH CNC Control in 2 axis - Weight 190,000 Kg - Tooling / Manuals / Diagrams Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, CNC control Fagor or Siemens delivery time approx 4-5 month Including normal equipment: - electrical equipment 24/230/400V german fabrication (CE-Norm) - machine lamp 24Volt Nwjdpsdag Svofx Ad Hep - cooling unit - steel holder, 4-fold, incl. upper support - 4-chuck faceplate 1000mm - Savety housing - central lubrication SKF/Vogel -1 set technical documentation, including: -- Operating manual -- circuit diagramm -- programming manual -- decleration of conformity (CE) - machine painting combination RAL 7035 and RAL 5015 Technical specifications Workpiece diameter over bed: 1000mm Working diameter over bed:1000 mm Working diameter over support: 650mm length between centers: 5000mm Max. weight of workpiece, withoit steady rest: 8000 kg Spindle head DIN 55026: Gr.15 spindle bore: 128mm Spindle inside cone(metrisch): 140 Performance of main drive: 22/30* kW spindle speed: 5-500U/min Turning speed steps (manual / stepless within steps): 24 max. spindle torque:9500Nm Machine dimensions: Length: 8200mm Width: 2400mm Height: 2000mm Weight: 15750kg * option

Condition: excellent (used), Year of construction: 2004, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / Universal lathe VDF Boehringer DUS 1000 ti OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Machine no. 2042.6616-05 Year of construction 2004 Turning length approx. 2200 mm Swing diameter over bed 1,000 mm Swing diameter over bed 1,000 mm Centre height over flat track 500 mm Bed width 560 mm Njdoud In Hopfx Ad Hswp Bed slide guide length 800 mm Spindle diameter front bearing 170 mm Spindle bore 128 mm Infinitely variable three-phase motor (AC motor) Drive power 37 kW Torque max. 4,069 Nm Total speed range 6.4 - 1,600 Gear stages 2 Heidenhain control Manualplus 4110, completely renewed approx. 1 to 2 years ago renewed 2 lynchets Equipped with roto power chuck, diameter approx. 500 mm. Including many accessories of clamping jaws, estimated 15 sets, as well as approx. 15 sets of Multifix basic holders, size D. Machine was equipped with a separate milling device, with its own control, value approx. 20.000,00 €. OPTIONAL EQUIPMENT SURCHARGE: C-AXIS MILLING TOOL Only operated by the owner, very good condition!

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 990570, turning diameter over cross slide: 370 mm, turning diameter: 630 mm, spindle bore: 105 mm, travel distance X-axis: 390 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 18,500 W, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, total height: 1,760 mm, total length: 4,000 mm, total width: 2,300 mm, feed length X-axis: 390 mm, feed length Z-axis: 3,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, workpiece weight (max.): 2,000 kg, torque: 2,100 Nm, overall weight: 4,100 kg, spindle nose: D1-8, Equipment: documentation/manual, FAT TUR MN 630 x 3000 Lathe – Ready for Use We are offering for sale a FAT TUR MN 630 x 3000 CNC lathe, fully overhauled and repainted, ready for production use. This robust and precise machine is equipped with a Siemens Sinumerik numerical control, guaranteeing excellent performance for machining large parts. Information: ✅ Machine in excellent condition ✅ 3-jaw chuck included ✅ Steady rest and tool set provided ✅ Complete documentation and backup of operating instructions Work performed: ✔ Complete overhaul: mechanical, hydraulic, and electrical ✔ Complete repainting ✔ Inspections and tests before commissioning Viewable in our workshop - Contact us for more information (machine details, delivery options, etc.) Nedpfx Adov Rrluo Hswp The price indicated is for delivery loaded on a truck. 🔹 LMIR – Your partner in industrial machine tools 🔹

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, CNC Lathe - Horizontal / Brand: GEMINIS / Type: GEMINIS GT9 G2 (heavy series) / Year of construction: 2015 The machine can be inspected by appointment under power. TECHNICAL DATA: - Max swing over bed: 2.000 mm - Distance between centers: 8.000 mm - Height of centres: 1.050 mm - Swing over slide: 1.600 mm - Main spindle bore Ø: 150 mm - Main spindle nose: DIN 55026-15 - Speed range: 4 - Speed range I: 0-80 rpm - Speed range II: 0-175 rpm - Speed range III: 0-350 rpm - Speed range IV: 0-700 rpm - Cross slide travel: 1.060 mm - Quill Ø: 400 mm - Quill travel: 300 mm - Max. weight allowed between centers: 30 tons Machine base: - Distance between the guideways: 1.350 mm - Height of the machine base: 650 mm EQUIPMENT / ACCESSORIES: - CNC-Control: FAGOR 8065 - Independent 4-jaw chuck: Ø 1.600 mm - Set of hard inner and outer claws - Square automatic turret: SAUTER 4 pos – Ø 320 x 320 mm - Tailstock and quill: Motorised - Quill placement: Built-in Rotating - Automatic Locking/Unlocking of the tailstock body Nwedjvuih Ujpfx Ad Hsp - Air conditioner for electronic cabinet - Portable electronic handwheel - Chip conveyor - 4-support Closed steady rest: Ø 500-900 mm - Permissible weight allowed for steady rest: 10 tons - Prepared for C-axis with transmission from main engine - Preparation for subsequent adaptation of a milling head with Y axis on turret - Preparation for rectifier head assembly - Very well-equipped with tools Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Peak height: 500 mm Tip width: 2000 mm Turning Ø: 1000 mm Turning-Ø over slide: 620 mm spindle nose: CL 11 Motor spindle: 37 kW Spaenefoerderer Speed: 1500 rpm. Nsdpfsctlp Sox Ad Hjwp Spindle bore: 105 mm Weight: approx. 8500 Kg

Condition: excellent (used), Brand: GEMINIS Model: CNC 4 PLUS 620 x 2000 Nsdpfx Adewznp Ne Hswp Cnc : FAGOR Distance between points : 2000 mm Height of centers : 315 mm Max. turning diameter : 620 mm Swing over saddle diameter : 370 mm Bar passage : 80 mm Precision swivelling turret: 1st speed range: 0 to 355 rpm 2nd speed range :0 to 1800rpm Tailstock : Morse 6 Main motor : 15 kw Max. Piece weight : 2.560 kg Tailstock quill diameter : 140 mm Machine size (L x Wx H): 4300x 1900 x 1800 mm

Condition: good (used), Year of construction: 1988, Description: Heavy-duty, high-precision horizontal lathe with Rohm hydraulic clamping system, slide with two working positions, Sauter 4-position tool turret, circular turning unit, CNC 6 axes, tailstock, chip conveyor. Suitable for both high-volume material removal and high-precision turning. Machine modified with a 2000 mm face clamping plate and increased in size. Year of production: 1988 Made in: Germany Turning diameter over bed: 2500 mm Turning diameter over telescopic covers: 2200 mm Turning diameter over slide: 1400 mm Turning length: 6000 mm Three-jaw chuck table: 2000 mm Spindle bore: 200 mm Attachment for circular turning Workpiece weight: 4,500–40,000 kg Turret head: 4 positions Spindle speed range: 4 – 400 rpm Main motor Siemens 95.5 kW Maximum torque: 40,000 Nm Overall power requirement: 125 kW Control: CNC SIEMENS 8T, 6 controlled axes Njdsxmb Adepfx Ad Hewp Machine weight: 43,000 kg Required space: 13,000 x 4,000 mm

Condition: excellent (used), Year of construction: 1989, turning length / mm turning diameter over bed / mm turning diameter over slide / mm control / WOHLENBERG PT1-1070II Heavy-duty lathe Very good condition heavy duty lathe, make Wohlenberg. The machine was partially overhauled in 2013! Type PT1-1070II Year of manufacture 1989 partially overhauled in 2013 Country of origin Germany CNC control Siemens 840 D extended from 7 m to 11 m turning length Santer turret geometry Turning diameter over bed 1,070 mm Turning diameter over support 710 mm Turning length 11,000 mm Bed width 710 mm 2 gear stages Speed 3.55 - 710 rpm Quill diameter 200 mm Quill stroke 350 mm Spindle clearance 128 mm Chip conveyor Boring tower incl. boring bar Length approx. Ø 200 x 2,430 mm Face plate 1,000 mm Steady rest 4 quills 500 mm open Nsdpfsud Ipkex Ad Hewp Main drive motor 71 kW incl. documentation

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 000554, turning diameter over cross slide: 300 mm, turning diameter: 560 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 18,500 W, total length: 3,700 mm, total width: 2,230 mm, quill diameter: 90 mm, quill stroke: 150 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 3 m/min, overall weight: 4,800 kg, spindle nose: D1-8", Equipment: documentation/manual, FAT 560 MN x 2000 CNC Lathe – Overhauled and Repainted We offer a FAT 560 MN x 2000 lathe, equipped with a Siemens 810D CNC control, completely overhauled and repainted by us. Njdpfxsrr Ui Uo Ad Howp Information: ✅ Machine in excellent condition, fully functional ✅ Complete documentation provided ✅ 3-jaw chuck, steady rest, and tooling included Work performed: ✔ Complete overhaul: mechanical, hydraulic, and electrical ✔ Complete repainting ✔ Inspections and tests before commissioning Machine available for viewing in our workshops – Contact us for more information! (machine details, delivery options, etc.) 🔹 LMIR – Your partner in industrial machine tools 🔹

Condition: good (used), In good technical condition and fully functional. Built in 1974 and overhauled including comprehensive modernization (Retrofix) of the CNC control including automatic central lubrication of the axes + hydraulic systems, water cooling, conductive rollers with brushes for a system for possible welding of the workpiece and complete protection against flying chips Heidenhain manual plus 4110 control system Swing diameter over the bed 1250 mm and over the support 900 mm. Max. workpiece weight: 14,000 kg. Max. workpiece length: 3000 mm. Machine weight: 16,350 kg. Machine power: 80 KW. Machine dimensions: width 3000 mm, height 2100 mm and length 8000 mm. Accessories: faceplate including handles, support (steady rest), raised cutter head, universal chuck. Complete technical documentation, service history and documents on revisions and maintenance. Nsdpovnb T Nefx Ad Hswp

Condition: used, VTL SC 17 CC Vertical Turret Lathe Specification: Faceplate diameter: 1450 mm Swing diameter: 1700 mm Nedexdcxuopfx Ad Hewp Turning height: 1200 mm Weight of the machine ca.: 22 t

Condition: excellent (used), Year of construction: 2007, Manufacturer: GEMINIS Model: GHT5 G2 1000 x 3000 Nwodewgmz Uepfx Ad Hep Cnc : SIEMENS 810 D Year : 2007 Distance between points : 3000 mm Max. Swing over bed : 1000 mm Max. Swing over saddle : 680 mm Main shaft hole diameter : 104 mm Turning speed : 1400 rpm Main motor : 37,5 kw Cross slide travel : 8m/min Tailstock quill diameter : 140 mm Quill traverse : 300 mm Bed width : 550 mm

Condition: ready for operation (used), Year of construction: 1992, VTL SC 17 CNC Siemens 802D Nodpfjugl I Njx Ad Hswp Chuck diameter - 1.450 mm Max turning -1.650 mm Job heigth -1.200 mm Table speed -2 -200 rpm Working feed range - 0,1-400 mm/min Rapid traverse - 4000 mm/min Main motor - 55 kw Weigth -aprox 21 to Movie with machine underpower available!

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Nsdpfewwar Isx Ad Hewp Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 110521, turning diameter over cross slide: 300 mm, spindle bore: 105 mm, rotational speed (max.): 2,500 rpm, total height: 1,760 mm, total length: 3,700 mm, total width: 2,230 mm, quill diameter: 90 mm, quill stroke: 150 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 3 m/min, overall weight: 5,300 kg, center width: 3,000 mm, center height: 315 mm, FAT 630MN x 3000 mm Lathe – Available as is or refurbished Are you looking for a high-performance and robust lathe for your machining operations? This FAT 630MN x 3 meters, manufactured in 2011, is an opportunity not to be missed. Nodpfev Rqw Aox Ad Hewp Included with the machine: ✔ Trident for optimal holding of long parts ✔ Independent 4-jaw tables ✔ Complete documentation and user manual Available in two options: - As is: Machine functional and immediately available – €29,850 excluding VAT - Fully refurbished and repainted: Refurbished for optimal reliability – €48,500 excluding VAT Contact us for more information or to arrange a visit! 🔹 LMIR – Your partner in industrial machine tools 🔹

Condition: ready for operation (used), Year of construction: 1984, turning diameter over cross slide: 1,050 mm, turning length: 4,000 mm, turning diameter: 1,050 mm, spindle speed (max.): 250 rpm, travel distance X-axis: 800 mm, travel distance Z-axis: 4,100 mm, CNC LATHE IKEGAI ANC75 Retrofit 2013 (original 1984) Fanuc-0iTD Chuck: 1250mm, swing over bed: 1500mm, swing over carriage: 1050mm, center distance: 4000mm 1 steady rest Nsdpsw Dndxjfx Ad Hjwp