Used center lathes 300-399mm turning diameter over bed for sale (192)

Condition: used, Year of construction: 2000, functionality: fully functional, Lead and feed screw lathe Make: Weiler Model: Condor B Year of manufacture: 2000 Technical data Manufacturer: Weiler Model: Condor B Year: 2000 Centre height: 165 mm Centre distance: 750 mm Spindle bore: 40 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle speeds: 45 – 2800 rpm Longitudinal feed: 0.015 – 3.7 mm/rev Metric thread pitches: 0.18 – 28 mm Main drive motor: 1.5 / 3 kW Dimensions (LxWxH): approx. 1.83 x 0.90 x 1.30 m Weight: approx. 1020 kg Cjdpey Ryvajfx Akqorf Equipment includes: - 3-axis Heidenhain digital readout - 3-jaw chuck - Operating manual - Collet chuck - Tool holder All information subject to change; no liability assumed. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1985, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 36 mm, turning diameter: 300 mm, center height: 150 mm, center width: 500 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,300 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 15 rpm, overall weight: 1,000 kg, Conventional lathe, center high 150 mm, between centers 500 mm, bore Ø 36 mm, 18 speed 15 - 3550 rpm, motor 3 kw, equipement: collet device, coolant device, 3-jaws chuck, rotating pin, drill chuck, tool post RAPID with 5 toolholders, lamp, dimensions 150x80x130 cm, weight ca. 1000 kgs Cjdpsx Urmljfx Akqorf

Condition: used, Year of construction: 2015, functionality: fully functional, JESSEY CHAMPION CP 1540 VS Guide and Lead Screw Lathe Manufacturer: Jessey Type: Champion CP 1540 VS Year of manufacture: 2015 Csdpfx Aozminuekqjrf Condition: used Scope of supply: - Coolant system - Machine light - Machine feet - Documentation - Chuck jaws - Digital display - MultiFix B Further information available upon request.

Condition: ready for operation (used), Year of construction: 2002, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32.0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm spindle taper DIN 55027 GR 5 total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college (!!) - in checked condition - machine videos - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - "NEWALL" digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 rpm. - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW Cedpfx Aksxab Tpjqorf - Weight 770 kg

Condition: ready for operation (used), L & Z Lathe NARDINI MS 125 E incl. collet chuck / quick-change tool holder -Center height above bed 150mm -Swinging diameter over cross slide 140mm -Distance between centers 500mm -Bar capacity 34mm -Spindle speeds 50 - 2500 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Collet chuck - quick-change tool holder, type 173 E incl. 16 x collets -Multifix with inserts -Change gears -Tool cabinet with various tools -Machine feet -Chip guard -Drill chuck & live center Csdpozpg Uqjfx Akqsrf -Work light -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 950kg Errors and omissions excepted.

Condition: used, Year of construction: 1959, turning diameter over bed 380 mm turning diameter over slide rest 215 mm Crodpsvwgmasfx Akqjf turning length 1000 mm weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The L&Z lathe is in good condition. Scope of delivery incl. extensive accessories and cabinets - 3-jaw chuck - 4-jaw face plate - steady rest

Condition: good (used), functionality: fully functional, turning diameter over bed slide: 335 mm, center height: 165 mm, turning length: 635 mm, swing diameter over cross slide: 210 mm, rotational speed (max.): 1,800 rpm, quill mount: MK 3, three-jaw chuck diameter: 200 mm, For sale is a Colchester lathe in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Colchester • Model: Student-1800 • Distance between centers/turning length: approx. 635 mm • Center height: approx. 165 mm • Turning diameter over bed: approx. 335 mm • Turning diameter over carriage: approx. 210 mm • Max. spindle speed: approx. 1800 rpm • Spindle bore: approx. Ø40 mm • Three-jaw chuck: approx. Ø 200 mm Csdpfx Akszlcrqjqsrf • Spindle nose: 4 in. D.1. Camlock • Tailstock spindle: MK3 • Condition: Used, functional Shipping costs via freight forwarder are possible (please inquire, providing your postal code). International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Errors in technical data and prior sale reserved.

Condition: ready for operation (used), L & Z Lathe WEILER CONDOR VS incl. RSF Digital Display -Center height 165mm -Swinging diameter over bed 330mm -Distance between centers 800mm -Speed range 28 - 2800 RPM -Automatic longitudinal / cross feeds -Spindle bore approx. 38mm -Tailstock -RSF Digital Display -Multifix base with inserts -3-jaw chuck & quick-change jaws -Collets / quick-change chuck incl. collets -Drill chuck / rotating center -Bed stop -Chip guard Crsdpfozn Rahsx Akqsf -Coolant system -Emergency stop / On/Off switch -Documentation Dimensions: L x W x H 2 x 0.8 x 1.6 meters / Weight 900 kg Errors and omissions excepted.

Condition: used, TECHNICAL DETAILS - Distance between centers : 700 [mm] - Max. diameter on bench : 380 [mm] - Machining diameter between centers : 200 [mm] - X/Z stroke : 180 / 610 [mm] MAIN SPINDLE - Spindle nose : A1-6" - Spindle passage : 54 [mm] - Spindle speeds : 0 - 3000 [rpm] - Spindle power : 11 [kW] - TAILSTOCK - Type of cone : CM4 - Quill diameter : 60 [mm] - Quill stroke : 140 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1.950 x 1.320 [mm] - Machine height : 1.820 [mm] - Machine weight : 2.000 [kg] EQUIPMENT - SIEMENS Conversational CNC - LCD control screen - Multifix Quick-Change Turret - Coolant tank Crsdszqgyvopfx Akqsf - Chuck 3 jaws

Condition: good (used), Year of manufacture: 1963 Machine number: 47 Type / Model: DLZ 355x1600 Control: conventional Center distance: 1,600 mm Bore: 35 mm Center height: 180 mm Swinging diameter over bed: 355 mm Swinging diameter over carriage: 180 mm Swinging diameter in the headstock: 700 mm Spindle speed range: 18 to 2,500 rpm Feed rate, longitudinal: 0.011 to 1.000 mm/rev Crodpfeznbt Sex Akqsf Connection: 5.8 kW Accessories/Equipment: 3-jaw chuck 200 mm; 4-position tool holder, guide rest Condition: good, ready for use Weight: 2.2 t Footprint: 2,700 x 450 mm Dimensions: 3,000 x 1,100 x 1,300 mm

Condition: ready for operation (used), Year of construction: 1987, Lathe Make Heidenreich & Harbeck type Hanseat 480 YEAR 1987 center height 255 mm turning diameter over support 300 mm center distance 1500 mm 24 speeds from 23.6 to 2500 n1/min tailstock MK 4 chuck F 250 digital display make Heidenhain motor 380 volt 11 kw transport dimension: length 3200 mm width 1200 mm Credjpviqiepfx Akqsf height 1550 mm Weight 2,5 to.

Condition: used, Year of construction: 1979, 1 used lead screw and turret lathe Manufacturer: Weiler Type: Commodor Technical data: Center height: 190 mm Swinging diameter over bed: 380 mm Swinging diameter over cross slide: 190 mm Distance between centers: 1000 mm Spindle bore: 56 mm Spindle mounting: DIN 55027 size 6 (A2-6) Spindle taper: MK 6 Spindle diameter in the front bearing: 90 mm Speed range: 25 – 2000 rpm Number of speeds: 18 steps Longitudinal feed: 0.026 – 0.90 mm/rev Cross feed: 0.013 – 0.45 mm/rev Metric threads: 0.3 – 10 mm Inch threads: 80 – 2.75 threads/inch Tailstock quill stroke: 150 mm Tailstock quill taper: MK 4 Dimensions: Length: approx. 230 cm Credpfjzlgxnjx Akqef Width: approx. 110 cm Height: approx. 200 cm Weight: 1600-1700 kg with digital display

Condition: excellent (used), Year of construction: 2012, Colchester Student 2500 Gap Bed Centre Lathe (2012) Ex Research Machine Super Condition Swing over Bed 330mm Swing in Gap 480m Swing Over Cross Slide 210mm Distacne Between Centres 635mm Crodpfx Akjy U Rtweqef Spindle Bore 40mm Spindle Nose D1-4 Spindle Speeds 40 – 2500rpm Spindle Power 2.2kW Supplied with: 3 Jaw Chuck with Forwards and Reverse Jaws Tool Holders as Picures QCTP Coolant Tool Box 5C Collet Chuck Chuck Keys 3 Phase 415V Electics For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79230 Machine Serial Number: 308029 Cost: £7,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm Credpfx Aksxmaktsqsf turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - EMERGENCY stop button - Operating instructions

Condition: used, Year of construction: 1996, greates pass round over bed 350 mm swing diameter over face slide 200 mm centre distance 800 mm centre height 175 mm turning length 700 mm 3-jaw chuck Röhm Ø 160 spindle bore 46 mm spindle head Gr. 5, DIN55027 Codpfx Asy Ez Dzskqorf number of spindle speeds 18 spindle turning speed range 31,5-2500 U/min tailstock quill taper MT 3 weight of the machine ca. 1000 kg Joystick control 3-axis digital display Rotating center point Chip guard Multifix tool holder, size E, with 3 interchangeable cassettes Adjustable machine feet Coolant system Worklight Operating instructions included Very good condition, The machine comes from a training workshop at a large corporation

Condition: used, Year of construction: 1966, turning diameter over bed 330 mm turning dia. in gap 400 mm turning length 600 mm centre distance 750 mm spindle turning speed range 20 - 1000 U/min spindle bore 25 mm 3-jaw chuck Röhm, Ø 200 mm dimensions of the machine ca. 2000 x 800 x 1500 mm weight of the machine ca. 1200 kg Fixed bezel Codpfxsxrg Ate Akqorf Turning bezel Turning center point Three-jaw chuck Röhm, Ø 200 mm, incl. inner and outer jaws Quick-change tool holder Original Multifix size B with 2 change holders Spindle brake Tailstock quill MK3 Machine feet Lathe chuck guard Chip guard Work light

Condition: good (used), Year of construction: 2006, CAZENEUVE OPTICA 360 CNC - NUM - 2006* *CNC training/production lathe – Very recent for an Optica – CE marked* *1. Identification* Make: CAZENEUVE S.A. - Pont-Évêque Model: OPTICA 360 Serial Number: 5055 Year: 2006 - CE Marking Control: NUM Distance between centers: 750 mm Spindle bore: Ø 54 mm *2. Why this 2006 model?* It is one of the last Optica 360 models produced. Therefore: 1. *NUM Control*: Reliable, parts and service are still provided by NUM. It is the standard in France. 2. *Year 2006*: Less wear, more modern electronics than models from the 90s. 3. *3 Cazeneuve modes*: Manual / Training / CNC. Ideal for a general mechanical workshop or vocational school. 4. *Robust*: Cast iron bed, 7.5 kW. You can switch from machining brass to pre-treated materials without any issues. *Condition*: Very clean for a 2006 machine. Original white/blue paint, no damage. Machine is on blocks, stored in a dry place. Can be seen powered on. *3. Technical Specifications* Characteristic | Value Ø over bed | 360 mm Ø over carriage | 200 mm Distance between centers | 750 mm Spindle bore | Ø 54 mm Spindle nose | A2-5 Spindle power | 7.5 kW Spindle speed | 50 to 3500 rpm Csdpfszc Ul Sox Akqerf Control | NUM 1020 / 1050 *Specify if you know which one* Weight | ~2300 kg *4. Included Equipment* - 3-jaw chuck Ø 200 - Rotating tailstock CM4 - Full splash guard with door safety interlock - Operator panel + NUM screen - Lighting - Cazeneuve technical documentation + NUM schematics - Basic tooling

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Weiler Praktikant 160 B lathe with guide and draw spindle, built to toolmaker precision, year of manufacture 2001, with 3-axis digital display K&C NEW, in very good condition, CE compliant. Technical data: >> Year of manufacture 2001, machine no. 4836 >> Center height 160 mm >> Center distance 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference point, tool programming 200 items, taper calculation, radius/diameter, quick zeroing, switching of the counting direction >> Quick-change tool holder with collets from 3 to 28 mm, increasing in steps of 1.0 mm Csdpfx Aezgcnuskqorf >> New 3-jaw chuck 160 mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Coolant system >> Electric spindle guard >> Machine feet >> Bed stop >> Splash guard >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 160 B lathe with guide and draw spindle, year of manufacture 2001, in very good condition. A very nice lathe with a protective device for the working spindle. The slides all move very easily and smoothly. Even at high speeds, the Weiler runs smoothly. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display from K&C makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site under power and convince yourself of its condition.

Condition: good (used), functionality: fully functional, Machine Name - Colchester Machine Model - Triumph 2000 Description - 3 Jaw Chuck Cjdsuk H Rbopfx Akqjrf Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post 2 axis Accurite DRO Gap bed Tailstock Coolant pump and tray

Condition: excellent (used), Year of construction: 1979, Manufacturer: Weiler Type: Commador II L+Z lathe Year of manufacture: 1979 L x W x H: approx. 2500 x 1200 x 1800 mm Crsdpfolp Ircex Akqef Weight: approx. 1500 kg Technical data: Max. turning diameter over bed: approx. Ø 380 mm Max. turning diameter over cross slide: approx. Ø 190 mm Max. turning length: approx. 1000 mm Bar passage: approx. Ø 56 mm Spindle: Speed range: approx. 25 – 2000 rpm Spindle nose: A 2 – 6 Drive power: approx. 4.0 kW Automatic longitudinal and facing feeds: Feed range: approx. 0.026 – 1.253 mm/rev Suitable for threads: – metric 0.35 – 12 mm – inch 44 – 2 TPI – diametral – pitch threads 88 – 5 DP – module 0.2 – 4 Tailstock: MK 4 Without tool holder

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 Cedjyuyruspfx Akqerf - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Csdpfxjxp Hude Akqsrf

Condition: new, Year of construction: 2025, spindle bore: 40 mm, turning diameter over bed slide: 340 mm, turning length: 760 mm, ERL-V Series Variable Speed Lathe Model: ERL-1330 V Turning Capacity: Ø 340 x 760 mm Spindle Bore: Ø 40 mm Variable Speed Drive Sino Digital Readout Fixed Steady Rest Travelling Steady Rest Multifix Quick-Change Tool Post Coolant System LED Work Light Spindle Brake Chuck Diameter: Ø 178 mm Technical Specifications: - Height of centers: 171 mm - Swing over bed: Ø 342 mm - Swing in gap: Ø 512 mm - Swing over cross slide: Ø 205 mm - Distance between centers: 760 mm - Bed width: 230 mm - Gap width in front of faceplate: 150 mm Headstock and Main Spindle - Spindle nose / internal taper: D1-4, MT No.5 - Spindle centre sleeve: MT No.5 x MT No.3 - Spindle bore: Ø 40 mm - Spindle speeds: Low 100–500 RPM / High 500–3000 RPM, infinitely variable Carriage - Bed length / carriage width: 400 mm / 384 mm - Cross slide travel: 180 mm - Top slide travel: 95 mm Threads and Feeds - Whitworth threads: 45 types / 2–72 TPI - Metric threads: 39 types / 0.2–14 mm - D.P. threads: 21 types / 8–44 - M.P. threads: 18 types / 0.3–3.5 M.P. - Longitudinal feeds: 0.05–1.7 mm/rev - Cross feeds: 0.025–0.85 mm/rev Tailstock - Quill diameter: Ø 50 mm - Quill travel: 112 mm - Centre taper: MT No.3 Motors - Main spindle: AC 2.2 kW (3 HP) - Inverter/Coolant pump: 1/8 HP Weight (Net / Gross): Approx. 850 / 950 kg Shipping Dimensions: 2000 x 965 x 1900 mm (L x W x H) Crjdpfxsxal Hmo Akqsf Crated Dimensions: 2270 x 1000 x 1120 mm (L x W x H) Presented in a format suitable for Machinery classifieds such as Machineseeker and TruckScout24.

Condition: new, Machine according to DIN 8605: Lathe with increased accuracy. Distance between centers: 700 mm Distance between centers: 170 mm Swinging diameter over bed: Ø 340 mm Swinging diameter over carriage: Ø 190 mm Bed width: 260 mm Travel of longitudinal slide: 600 mm Travel of cross slide: 220 mm Travel of top slide: 110 mm Carriage length: 410 mm Carriage width: 150 mm Guide length of bed carriage: 380 mm Lathe tool shank cross-section: 20x20 mm Distance from lathe center to top slide: 34 mm Swiveling range of top slide (rest): 60/120° Main spindle: Spindle mount DIN 55029 (camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter in the front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40-3000 RPM Speed control: Stepless Mechanical speed steps: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard equipment): 0.4 - 7.0 mm 32 inch threads (with optional gear set D3Z200): 56 - 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 - 3.5 32 diametral pitch threads (with optional gear set D3Z200): 112 - 8 Tailstock: Arbor diameter: Ø 50 mm Internal taper of arbor: MK 3 Cjdpfx Akedctnbsqorf Arbor travel: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights Suspended: 50 kg Supported by tailstock: 150 kg Further standard equipment (standard accessories): Includes machine stand and integrated 3-axis digital display, German language, with color display 1 length stop 1 center, taper 1:22, DIN 7178 1 center MK3 1 chuck key 1 key part 1 grease gun 3 hexagon head screws M16x60 - DIN 933 3 hexagon nuts M16-8 DIN 934 1 simple tool holder 1 key A13x17 DIN 837 1 open-end wrench SW 19 1 open-end wrench SW 22 1 hexagon screwdriver SW 5 1 hexagon screwdriver SW 6 1 hexagon screwdriver SW 8 3 shear pins 1 box wrench 1 operating manual incl. parts list 1 electrical documentation 1 test report Packaging (for truck transport with pallet and plastic cover) Machine according to CE Note: Illustrations show special equipment / accessories, among other things!

Condition: reconditioned (used), Product information "Voest Alpine DA 160" Voest lead and feed spindle lathe Crjdpfey Ndqrox Akqef Model DA 160 Condition: Refurbished Technical data Center height: 165 mm Distance between centers: 650 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 190 mm Bed width: 210 mm Lead spindle diameter: 25 mm Chuck diameter: 160 mm Tailstock spindle: MK 3 Spindle speed (16): 30 - 2500 rpm Motor power: 2 / 2.4 kW Quill stroke: 100 mm Dimensions (L x W x H): 1500 mm x 900 mm x 1650 mm Equipment: - Geometry report - 3-axis digital display, Sino brand - NEW - 3-jaw chuck - Emergency stop button - Quick-change tool holder system Multifix, number of holders 6 - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with taper shank - Follower point - Lead and feed spindle cover NEW - Chuck guard, limit switch secured - Operating tool - Operating manual - Machine feet