Used Center lathes 400-499mm turning diameter over bed for sale (208)

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t Cobvdsm Rlb Njlvnogt dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: good (used), center height: 190 mm, center width: 1,250 mm, overall weight: 1,500 kg, Lead and feed screw lathe Colchester -WAG 813 On offer here is a lead screw and feed screw lathe from Colchester Technical data: Manufacturer: Colchester Type: Triumph2000 Speeds: 25-2000 rpm Top height: 190 mm Center distance: 1250 mm Machine dimensions: (w x d x h) 1200 mm x 2500 mm x 1700 mm Power connection / control voltage: 380 Volt Cgebvdjr Iim Hjlvnet General / technical data: Used lead and feed spindle lathe from English production with original Multifix tool holder system in good condition. The machine has a 3-axis digital readout. The machine also has a chip guard. Accessories / special equipment: Forkhardt wedge bar chuck (power chuck)

Condition: used, machine/vehicle number: 170009, turning diameter over bed:400 mm turning diameter over slide rest:250 mm turning length:1000 mm max swing over gap:520 mm Height of centres:200 mm crossed path:230 mm bed width:218 mm main spindle bore:52 mm spindle size:MK 6 speeds::55-2000 U/min turning angle of tool post:90 grad tail stock:50 mm taper in tailstock:MK 4 Cjbodmrcrjvdlvnsgt threading metric:0,4-7 mm threading WHITWORTH:4-60 TPI total power requirement:2,2 kW dimensions of the machine ca.:1940 x 820 x 1545 mm weight of the machine ca.:750 kg tailstock quill:110 mm tapping modul:0,4-3 mm tapping diametral:8-84 Gang/Zoll

Condition: good (used), Year of construction: 1992, machine/vehicle number: 144150920187, Offer 24009 Technical data: - Center height 200 mm - Center width 1500 mm - Largest circulation - Ø over bed 400 mm - over cross slide 210 mm - spindle bore 56 mm - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 150 mm - Spindle speeds 11 - 2240 rpm - feeds longitudinal + plane - Metric thread pitches - inch thread - modular thread Cgobjrvx Naevdlvnst - Diametral pitch thread - Drive 400 V / 7.5 kW - 3 jaw chucks - Space requirement approx. W 3300 x H 1600 x D 1200 mm - Weight approx. 2800 kg

Condition: new, Year of construction: 2024, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, turning diameter over bed slide: 1,000 mm, center height: 500 mm, center width: 700 mm, turning length: 6,000 mm, bed width: 700 mm, rotational speed (max.): 1,000 rpm, Equipment: rotational speed infinitely variable, Heavy-duty lathe with infinitely variable speed control in 4 ranges. Digital position indicator / digital measuring device with constant cutting speed control - High motor power of the main drive 30 kW in standard version (applicable in the range from 5 - 1000 rpm) - Rigid main spindle with 132 mm bore - Bed width 700 mm - Prismatic guide, rigid cross slide Accuracy according to DIN 8607 - Rigid main spindle: TUS 800 /100/1250 with 155 mm spindle bore, mounted in precision bearings Manufacture: FAG or SKF Spindle holder according to DIN 55027/15 - Hardened guideways 48 +/-2 HRC - Locked chuck guard (max. TUS 800 = 760 mm, TUS 1000 = 960 mm, TUS 1250 = 960 mm) Rear, continuous chip splash guard Cjbougwrgevdlvnjgt - Moving front chip guard - Jogging gear for main spindle - Closed feed box of rigid design with sliding wheel blocks on splined shafts - Central lubrication for bed slide and facing slide - Central lubrication for headstock and feed box - Feed rates, metric and inch threads without wheel change - Rapid traverse lengthwise, crosswise and in top support - Safety shutdown of the handwheel on the bed slide or the hand crank on the cross slide during rapid traverse movement - Feed direction change on the bed slide and also on the headstock - Quick-change tool holder model D1 Scale ring on the bed slide and tailstock handwheel - Scaling on the tailstock quill 2-stage tailstock quill/ with gear ratio 1:1 and 1:4 - Electrically adjustable tailstock Support for lead and feed spindles from 2000 mm SW - CE and declaration of conformity

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Cebvdolzm Eqjlvnogt Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: good (used), Center distance 1150 mm Cgjbvsptak Rodlvnst turning diameter over bed 450 mm spindle passage 52 mm chuck 200 mm 3-jaw Taper in tailstock MK 4 quill diameter 58 mm speed 40-2200 rpm Coolant device power 4 KW dimensions LxWxH 2250x1040x1280 mm weight approx. 1,3 t quill stroke 155 mm

Condition: repair required (used), turning diameter over bed 400 mm turning diameter over slide rest - mm turning length 1000 mm total power requirement 9 kW Cebsu Tkqijvdlvnegt weight of the machine ca. 2 t dimensions of the machine ca. 2,5*1,2*1,6 m Machine has been partially overhauled Among other things engine renewed ( 8.000 EUR ) The repair was not completed due to plant closure

Condition: good (used), Technical data: Cgjbvdlvsu Nac Aonjt Center height: 450 mm Center width: 3000 mm Diameter over slide: 267 mm Spindle bore: 95 mm Speed: 8 - 800 rpm Tailstock taper: 5 Position indicator: NEWALL B60 Motor power: 7.5 kW Dimensions (length x width x height): approx. 6000 x 2000 x 1900 mm Weight: approx. 8 tons Accessories: 4-jaw chuck: ∅ 600 mm Many accessories The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to age; used machines are sold without any warranty.

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: fortlaufend, Height: 200 mm Centers: 1000 mm Turning diameter over bed: 400 mm Turning diameter over support 220 mm Spindle Bore: 52 mm Speed ​​range: 9-1600 rpm Spindle nose: Bayonet DIN 5027 KK 6 Longitudinal feeds range: 0.028 to 6.43 mm / rev (93 steps) Cgsbvs Nh Hxedlvnot Area cross feeds: 0.012 -2.73 mm / rev (93 steps) Metric threads: 0.5 - 224 (48 steps) Inch threads: 72 - 1 / 8 tpi (46 steps) Module pitch: 0.5 - 112 (42 steps) Diametral thread: 56 - 1 / 4 DP Quill diameter: 75 mm Spindle stroke: 150 mm Taper: Morse taper 5 Motor power: 7.5 kW Weight: 2100 kg Dimensions: 2672 x 975 x 1230 mm Accessories: Digital display for 3-axis mark SINO, 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed + follow rest, coolant system, fire wall, rapid, manual lubrication, 4-way tool operating light.

Condition: new, Year of construction: 2025, Functionality: fully functional, center height: 200 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Whether prototype construction, maintenance or, most importantly, training - EMCO's conventional and cycle-controlled machines manage the balancing act and offer maximum accuracy in the smallest possible space and flexibility down to the last detail. Highlights of the EMCOMAT 20D- Main spindle DIN55029- Tailstock (eccentrically adjustable)- Simple steel holder (clamping claw)- Belt drive for feed gear- Chuck protection with electric limit switch- Optional equipment such as coolant device, sliding chip guard doors etc.Working range:- Travel in X/Y/Z: 220 / - / 1010 mm- Center distance: 1000 mm- Center height: 200 mmMain spindle:- Max. travel distance in X/Y/Z: 220 / - / 1010 mm- Max. travel distance in X/Y/Z: 220 / - / 1010 mm- Max. travel distance in X/Y/Z: 1000 mm Speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm - Max. speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm Drive power: 5.3 kW Tailstock:- Inner cone: MK3- quill stroke: 120 mmm- inner cone of the quill: 50 mm Cgobvded D I Thelvnot

Condition: new, Year of construction: 2024, Working range Center distance 1000 mm Turning diameter over bed 356 mm Rotation Ø over support 220 mm Bed width 206 mm Travel paths X-axis travel 178 mm Z1-axis travel 92 mm Swivel range top slide ± 50° Main spindle Cgjbvdlju Sklyovnot Speed range, high 550 1/min - 3000 1/min Speed range, low 30 1/min - 550 1/min Spindle holder Camlock D1-4 Spindle bore 38 mm Spindle cone 5 MK Feed rate Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Thread cutting Thread cutting, metric (37) 0.4-7 mm Thread cutting Whitworth (28) 4-56 TPI Tailstock Tailstock pinol diameter 45 mm Tailstock taper 3 MK Tailstock quill stroke 120 mm Tailstock cross adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg

Condition: good (used), Year of construction: 1974, Type / model: 16K20 Control: conventional Center distance: 750 mm Passage: 55 mm Center height: 220 mm Turning diameter over bed: 440 mm Speed range: 12 to 1,600 rpm Cgobvdjvug Dtolvnot Feed: Connection: 10 kW Accessories/equipment: Condition: good Weight: approx. 2.4 t Dimensions: 2,600 x 1,200 x 1,700 mm

Condition: used, Year of construction: 1989, turning diameter over bed 400 mm turning diameter over slide rest - mm turning length 1000 mm Cgebou Nmzlsvdlvnjt total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,5*1*1,6 m

Condition: as good as new (ex-display), Functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 7.5 kW Cgsbvdlvsu T Hiujnot Spindle speed range: 20-2000 mm Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: reconditioned (used), Year of construction: 1998, Functionality: fully functional, spindle speed (max.): 2,500 rpm, spindle motor power: 7,500 W, The Colchester Combi 2000 has been overhauled in the workshop and is in very good condition. Cgsbvju D Aw Eodlvnjt

Condition: ready for operation (used), Functionality: fully functional, 75mm clearance 500mm chuck with rotating jaws Max workpiece diameter 640mm Cgjbvdeqwgz Uolvnjt

Condition: like new (used), Year of construction: 2008, SPECIFICATION KB-45 Cutting capacity 455mm Cgjbvdleu Rdr Revnjt Maximum working height 255mm Table 600 x 500 mm Tilt 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Saw blade speed 25-115m/min Butt welder capacity 3-16mm Motor size 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Overload switch Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welder, blade shear and grinder Slotting table Low-voltage halogen lamp Mitre guard for angled cuts Quick rip fence for straight cuts

Condition: used, Functionality: fully functional, spindle bore: 41 mm, turning length: 1,000 mm, Amutio Cazeneuve Lathe Model HB 500, 1000mm e.p. Max diameter on bed 500 mm, max diameter on cross slide 300 mm, shank hole 41 mm, 18 speeds from 25 rpm to 2000 rpm. With Fagor dimension display, with fixed and mobile rests, with protections, connected to 220 V Cgebvsv Rnfqedlvnst

Condition: new, Year of construction: 2024, For delivery times and current prices, please contact us directly. Dimensions and weights: Length (product): approx.1935mm Width/depth (product): approx.780mm Height (product): approx.1740mm Cebvdlvoq T R Dmonjgt Weight (net): approx.765kg Working ranges: Center height: 200mm Center width: 1000mm Rotation diameter over machine bed: 400mm Swing diameter over cross slide: 250mm Speed range: Number of speed ranges: 8 Speed range: 70 - 2000min¯¹ Electrical data: Drive motor power: 2.2kW Supply voltage: 400V Mains frequency: 50Hz Cooling lubricant system: Cooling lubricant system Coolant pump power: 100W Spindle: Steel holder: SWH 3-E Spindle holder: Camlock DIN ISO 702-2 No.5 Spindle bore/bar passage diameter: 53mm Spindle cone: MK 6 Tailstock: Tailstock mount:MK 4 Tailstock quill stroke: 110mm Pitch: Pitch metric: 0.4 - 7mm/rev Number of leads metric: 32 Pitch inch: 56 - 4Gg/1" Number of pitches inch: 31 Travel distance: Top slide travel: 98mm Travel distance face carriage: 185mm Bed slide travel: 850mm Feed rate: Feed range longitudinal:0.014 - 0.38mm/rev Number of longitudinal feeds: 26 Feed range flat: 0.052 - 1.392mm/rev Number of feeds flat: 32 Tool clamping: Tool holder Holder size: 16mm Electrical connection: Total connected load: 3.0kW

Condition: as good as new (ex-display), Functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Cgobvdleu T E Ehsvnot Motor power: 7.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: excellent (used), Swing over bed 400 mm Distance between centers 1250 mm Spindle speeds 0-2500 rpm Cgobvdlsq Dll Devnot Misc. accessories MARCELS MASCHINEN CH

Condition: used, Functionality: fully functional, spindle bore: 52 mm, turning diameter: 460 mm, turning length: 1,600 mm, Pinacho lathe model S90 E 230 x 1600mm e.p, diameter admitted on bed 450mm, on neck 550mm, on cross slide 220mm, shank hole 52mm, speeds 21-2200 rpm, 5.5 hp engine, with steady rest, both clutches and main shank or broach bearings changed, lathe in good condition Cgebvdlov Rndtjvnot

Condition: as good as new (ex-display), Functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Cebvdlvocir Ansnogt Equipment including Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Functionality: fully functional, spindle bore: 52 mm, turning diameter: 450 mm, turning length: 1,600 mm, Pinacho lathe model L1 225 x 1600mm e.p, diameter admitted on bed 450mm, on neckline 690mm, on cross slide 215mm, quill hole 52mm, 18 speeds 32-1800rpm, 5.5hp motor, with steady rest, with quick change turret, with various accessories, lathe in good condition Cgobvdov Rm Udjlvnst