Maschinen und Werkzeuge Benad GmbH & Co. KG

Condition: good (used), Year of construction: 1994, Functionality: fully functional, total width: 2,150 mm, total height: 2,250 mm, total length: 2,300 mm, grinding width: 1,300 mm, overall weight: 4,500 kg, power: 41 kW (55.74 HP), Wide Belt Sander The MFA 8 multi-purpose surface sander is used for sanding flat wood materials and/or painted flat wood materials. The sanding width is 1300 mm, the working height is a constant 880 mm. The maximum workpiece clearance is 140 mm. The machine is equipped with cross- and longitudinal sanding units and a brush roller. All sanding units are equipped with intermittent sanding belt blasting. Sanding width: 1300 mm Motors: 41 kW 3 units (cross-sanding unit, sanding pad unit, and brush roller) digital and pneumatic control Ljlhowlq Ntjcdwwohg

Condition: used, Year of construction: 1994, operating hours: 5,373 h, Functionality: fully functional, machine/vehicle number: M/6176, total length: 9,000 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 4,000 kg, Edgebander Operating hours: 05373.33 h (read) Processing units: Upper pressure line KAM 4-2 01 Rapid heating tank KAM 4-61-02.01 Lower pressure line KAM 4-1-01 Edge feeding table KAM 4-4-01 Automatic Magazine for solid edges and foils Feed roller KAM K4-51-01 KAM travelling foil shear Cutting device model type K 17 Fixed milling machine KAM 4-50-00 model type NF 30.1 Fine milling machine KAM 4-26-80 Slot milling machine KAM 4-32-01 Rounding corners Grinding device Scraper unit Oscillating edge cleaning unit KE-0 Dimensions: approx. 9,000 x 1,400 x 2,000 mm Lholhjwf U E Socdwwsg Weight: approx. 4,000 kg

Condition: used, Year of construction: 1994, Functionality: fully functional, total length: 6,800 mm, total width: 2,400 mm, total height: 2,000 mm, table length: 2,200 mm, Universal grinding machine type USM with milling and sanding units UNIVERSAL MILLING AND SANDING MACHINE TYPE UFSM Suitable for machining straight and profiled edges on panel-shaped workpieces, the ends of strips and posts, stair treads, etc. Lhslewf U Awshcdwwsg Design: 1. BASE MACHINE, length: approx. 6,800 mm, machine table length: 2,200 mm for a maximum workpiece length of 2,000 mm, drive for automatic table reciprocating motion, feed rate in the range of 4 - 40 m/min. Continuously adjustable 2. Workpiece clamping device TR, 0-80 mm 3. Profile milling unit, working from below, P = 3.7 kW and n = 6000 rpm 4. Profile milling unit, scanning from above, P = 1.5 kW and n = 6000 rpm 5. Sanding unit S 2000 K, for grinding straight edges, P = 2.4/3.0 kW 6. 2 x Sanding units S 2000 x 60 DF, for grinding the lower and upper radius, P = 0.6/0.9 kW 7. Digital electronic, travel-dependent tool control for precise tool insertion and removal, independent of the feed rate

Condition: used, Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 019 113, total length: 16,000 mm, total width: 1,100 mm, total height: 1,700 mm, Manufacturer: JENOPTIK Technologie GmbH Ljlhcdwswbfniowehg Type: JENOMIC P3/30 Year of manufacture: 1998 Multi-spindle machining center for radius grinding and polishing Speed indicators for each main spindle and eccentric spindle Rated voltage: 400 V 3/N/PE Frequency: 50 Hz Connected load: 8.5 kVA

Condition: used, Functionality: unexamined, machine/vehicle number: GER-078, load capacity: 10,000 kg, Cable-operated workpiece manipulator with a 10,000 kg load capacity Max. workpiece width: 2,000 mm Total dimensions: 5,860 x 800 x 1,400 mm Weight: 3,090 kg Max. load capacity: 10,000 kg Lholhcdowbflhewweg Max. workpiece width: 2,000 mm

Condition: good (used), Functionality: fully functional, Biting pliers for wall thicknesses from 120–300 mm with a powerful hydraulic power unit. Biting force: 30 t, pliers: 47 kg, power unit: 10 kW, 7.4 l/min at 750 bar, 64 kg Ljlhcdjwbfcgowwohg

Condition: not inspected (used), Year of construction: 2007, Functionality: unexamined, MPM AccuFlex Stencil Printer Stencil Printer The MPM AccuFlex is an automatic stencil printer designed for medium-volume, high-product variety printing. Maximum PCB size: 584 mm x 508 mm (23" x 20") Lslhjv T T Dkscdwwohg Minimum PCB size: 75 mm x 50 mm (3" x 2") PCB thickness: 0.8 mm to 5.0 mm Maximum PCB weight: 4.5 kg Maximum component height below the PCB: 15 mm Transport speed: Adjustable Transport height: 860 mm to 960 mm from floor Print speed: 5 mm/s to 200 mm/s Print area: 559 mm x 498 mm Stencil frame size: Standard 737 mm x 737 mm (29" x 29") 240 V AC, 50/60 Hz Compressed air supply: 0.63 MPa (6.3 bar) Dimensions (H x D x W): 1575 mm x 1448 mm x 1314 mm mm Weight: 700 kg

Year of construction: 2001, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 58226018400020, Weiss Temperature Chamber Type: WT11-270/70/10 Section No.: 58226018400020 Control: Simcon/32-NET Version: 00.1902 Ports: Left (2x) NW 50 mm, Right (3x) NW 125 mm Temperature Range: -70°C to 180°C Test Chamber Volume: 270 liters Door with window, interior lighting Lelev T Tncohcdwwohg Water-cooled temperature chamber Compressed air dryer type: ZANDER Temperature change rate cooling: 10 K/min Temperature change rate heating: 10.0 K/min Temperature deviation over time ± 0.1 to ± 0.5 K Temperature homogeneity over space ± 0.5 to ± 2.0 K Test Chamber Dimensions: Width 580 mm x Depth 615 mm x Height 750 mm Housing dimensions: Width 895 mm x Depth 2080 mm x Height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW, Rated current 26 A Refrigerant: R-404A/R-23

Condition: used, Functionality: unexamined, Year of construction: 2015, MAGAZINE LOADER, magazine loading system, magazine loader, shuttle magazine unloader, magazine feeder, magazine unloader, connecting conveyor, magazine loading system for large circuit boards, destacker: YJ LINK ALD-CE SINGLE MAGAZINE LOADER Working height: 950 +/-20 mm Working width: 250 - 510 mm Size: 1400 x 1420 x 1830 mm (WxDxH) (2x) YJ LINK magazine loading system for large circuit boards Size: 1500 x 2850 x 1830 mm (WxDxH) Ljljv Hpblshcdwwshg YJ LINK ALD-CE magazine loader This device is located at the beginning of the SMT line. It transfers printed circuit boards (PCBs) stacked in a magazine rack to the downstream machine one at a time using a pneumatic pusher. Touch screen (control panel) Controlled by PLC (Programmable Logic Controller) SMEMA interface YJ LINK AUD-CE Shuttle Magazine Unloader Shuttle Magazine Unloader Located at the end of the SMT line, this device consists of a combination of a single shuttle and a double lifter. It stacks printed circuit boards (PCBs) one at a time into an empty magazine rack using a pneumatic pusher mounted on the single shuttle. LED tower lamp (with buzzer) Touch screen (control panel) Controlled by PLC SMEMA interface Integrated single shuttle conveyor YJ LINK ADL-CE Magazine Feeder The YJ LINK ADL-CE is an automatic magazine feeder used in SMT production lines to efficiently load printed circuit boards (PCBs) into magazines. YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ACC-CE Connecting Conveyor Size: 1500 x 610 x 950mm (WxDxH) YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ADL-R90 Destacker Destacker ￭ LED tower signal light (with buzzer) ￭ Touch screen (operator panel) ￭ Controlled by PLC ￭ SMEMA interface ￭ 40 pcs stacking capacity at 1kg ￭ Safety light barrier on the screw ￭ Automatic width adjustment ￭ Double plate structure Transport height: 950mm ± 20mm Color: EX8816(S)-SR-WH020 (KCC) Conveying direction: Left to right / Right to left Fixed rail: Front / Back PCB edge: 3mm PCB thickness: 1.0mm ~ 2.0mm Conveying speed: 200mm/s Conveyor belt: Antistatic 10¹⁰ ~ 10¹², temperature: 70˚C Air supply: 0.5Mpa (5 bar) Air consumption: 4 ℓ/min Power consumption: 430W Power supply: 230V / 50~60Hz, 1 phase

Condition: good (used), Year of construction: 2003, machine/vehicle number: 4N1028, overall weight: 300 kg, total length: 1,400 mm, total height: 1,520 mm, total width: 780 mm, type of input current: AC, input voltage: 230 V, Equipment: type plate available, SPECTRO LAVMC05A SPECTROLAB spark spectrometer, metal analysis device Lhsljvytalohcdwwog Input: 230 VAC / 50 Hz Power: 2500 VA

Condition: used, Year of construction: 2012, Functionality: fully functional, conveyor belt length: 9,800 mm, conveyor belt width: 600 mm, overall weight: 2,800 kg, power: 4 kW (5.44 HP), input voltage: 400 V, Equipment: type plate available, The telescopic belt conveyor can be extended from 5.2 m to 9.8 m in length. Belt speed: 0.3 m/s Belt direction: unloading Lhslhcovyr Uuedwwsg Attachment for transfer to a further belt system Type: TTB-600-5.2x9.8-H Year of manufacture: 2012 Total length (retracted): 5,200 mm Total length (extended): 9,800 mm Belt width: 600 mm Max. dynamic load capacity: 50 kg/m Max. static load capacity: 25 kg/m Weight: approx. 2,800 kg

Condition: reconditioned (used), Year of construction: 2021, operating hours: 12,622 h, Functionality: fully functional, overall weight: 300 kg, total length: 1,250 mm, total width: 650 mm, total height: 1,750 mm, power: 7.5 kW (10.20 HP), fuel type: electric, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Equipment: refrigerant dryer, type plate available, Kaeser AIRCENTER SM 13 screw compressor 8 bar 7.5 kW Operating hours: 12,622 h Installed refrigeration dryer Kaeser ABT 15 Lhelhovyr R Ajcdwwog Maintenance carried out with the following items: - Compressor filter set - Oil separator cartridge - Fluid Rotary S-46 - Cooling fluid

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, worktable width: 1,700 mm, worktable length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Lolhcdwjvvlyijwohg Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: good (used), Year of construction: 2014, Functionality: fully functional, operating pressure: 10 bar, Compressor system consisting of: Screw compressor: Atlas Copco GA11VSD+ Refrigeration dryer: Atlas Copco FD70 Pressure accumulator Öwamat 4 Oil-injected screw compressor with variable speed control Lhslhovu A Hdscdwweg Max. operating pressure: 10.0 bar Engine power: 11 kW Volume flow: 25.5-115.2 m³/h Control hours: 61,837 h Operating hours: 21,094 h Engine starts: 267,928 Load cycles: 315,576

Year of construction: 1997, Condition: used, Functionality: fully functional, High vacuum vapor deposition system with thick film device Lelhevu Aunecdwwjhg The vapor deposition system was used to coat lamp reflectors System consisting of: - Vacuum chamber with support frame, evaporator - Pump stand - Control cabinet - Glow device with 5kV glow voltage - Incl. 2x rotating basket 940x1370 mm with charging trolley - Suction capacity of rotary vane pump: 200 qm/h - Suction capacity of Roots pump: 2500 qm/h - Suction capacity of oil diff. pump: 8000 l/s - Internal dimensions of chamber: øxl 1050x1370 mm Connection value: 40 kVA Dismantling and removal is the responsibility of the buyer.

Condition: like new (used), Year of construction: 2017, Functionality: unexamined, total length: 890 mm, total width: 580 mm, total height: 352 mm, The MiR200 is an autonomous mobile robot (AMR) from Mobile Industrial Robots that is designed to transport loads of up to 200 kg. Incl. YJ LINK add-on module for circuit board magazines and charging station. Dimensions and weight: Length: 890 mm Width: 580 mm Height: 352 mm Ground clearance: 50 mm Weight (without load): 70 kg Colour: RAL 7011 Iron grey Payloads: Robot payload: 200 kg (maximum on a 5% gradient) Towing capacity: 500 kg (with MiRHook 200) Speed and performance factors: Range / maximum speed: 10 hours or 15 km Forward: 1.1 m/s (4 km/h) Backward: 0.3 m/s (1 km/h) Turning circle: 520 mm (around robot centre) Positioning accuracy: +/-50 mm to position +/-10 mm to docking mark Overcome tolerance for gaps and thresholds: 20 mm Product design lifetime: 5 Years Minimum width for corridors: 950 mm Space requirements and turning circle: Turning diameter at an obstacle/wall: Without load: 1.3 m Full load: 1.3 m (normal space requirements) Lholhcdsvt Elaewwog Without load: 1.2 m Full load: 1.1 m (minimized space requirements) Power supply: Battery: Li-NMC, 24 V, 40 Ah External charger: Input voltage: 100-230 V AC, 50-60 Hz Output voltage: 24 V, max. 15 A Charging time: With cable: Up to 4.5 hours (0-80%: 3 hours) With charging station: Up to 3 hours (0-80%: 2 hours) Charging options: MiRCharge 24V, Cable Charger Environment: Ambient temperature range: +5 °C to +40 °C (humidity: 10-95%, not condensing) Protection class: IP20 Certifications: ESD certified, Cleanroom certified, ESD tested Noise level: 60-64 dBA (depending on floor conditions) Environment: For indoor use only Safety standards and approvals: Certifications: CE, EN1525, ANSI B56.5, ISO13849-1, EN61000-6-2 & EN61.000-6-4 Communication: WiFi: Dual band wireless (AC/G/N/B) Inputs and outputs: USB and Ethernet Bluetooth 4.0 LE: Range 10-20 m Sensors: SICK safety laser scanner: S300 (front and rear) 360° optical protection: Around the robot 3D camera: Intel RealSense™ (detection of objects in the travel path 50-1800 mm above the ground) Ultrasonic sensors: 4 pieces Attachment module: Max. height from the ground: 1800 mm Center of gravity: Less than 900 mm above the ground

Condition: good (used), Year of construction: 2009, Functionality: fully functional, (2x) Climate chamber for stability tests The system for storing stability samples consists of 2 climate chambers. 2 climate chambers are supplied by an electrical control cabinet and have separate circuit diagrams. The climate chambers are based on cooling cells from Viessmann. The climate chambers are dimensionally identical and equipped with stainless steel shelves. The climate chambers were connected to a measured value recording system. This is currently not available for the system. However, a connection to a building management system is basically possible and prepared. The entire system was taken out of service in 2024 and finally qualified. The qualification documents can be made available on request. The delivery and installation of the system as well as the technical service were carried out exclusively by ThermoTEC. The client offers the objects mentioned EXW Ex Works "ex works". This means that the dismantling and loading of the objects is the responsibility of the buyer. The system essentially consists of: 2 constant climate chambers made of 80mm PU elements, stainless steel floor and single-leaf revolving door with frame heating 2 chamber fittings for air conditioning consisting of: -Fans for circulating the chamber air -Direct evaporation register with refrigerant R404A, for cooling and dehumidification -Electric resistance heating 2*1.5kW Cold steam inlet hoses from the ultrasonic humidifier 2 air-cooled refrigeration condenser units for cooling and dehumidifying the climate chambers. 2 ultrasonic humidifiers with an output of 1kg/h Switch cabinet for controlling and regulating the climate chambers The circulating air of the constant climate chambers is sucked in via the air conditioning unit, processed and blown out via the front. The temperature and humidity sensor mounted in the intake area transmits the actual values of the test room to the respective control circuit of the climate chambers. An independent process controller is installed in the control cabinet front for each control circuit (temperature/humidity). The controllers control the following functions as required: > HEATING with electric resistance heating > COOLING with refrigeration unit and direct evaporation Lhslhcsvpu U Nsdwwog > HUMIDIFICATION with ultrasonic humidifier > DEHUMIDIFICATION with refrigeration unit and direct evaporation The climate chamber temperature and humidity are controlled automatically. Cell type: Tecto cooling and deep-freezing cell Standard WL80 VIESSMANN Dimensions of the climate chambers (KK) 2 each: Outside (WxDxH): 2100 x 3000 x 2310 mm Door dimensions (WxH): 800 x 2000 mm Inside (WxDxH): 1940 x 2840 x 2140 mm Climate chamber 3 25°C/60%RH - A0431_00 - Year of construction: 2009 Climate chamber 4 30°C / 65% RH - A0432_00 - Year of construction: 2009

Condition: good (used), Year of construction: 2005, Functionality: fully functional, (2x) Climate chamber for stability tests The system for storing stability samples consists of 2 climate chambers. 2 climate chambers are supplied by an electrical control cabinet and have separate circuit diagrams. The climate chambers are based on cooling cells from Viessmann. The climate chambers are dimensionally identical and equipped with stainless steel shelves. The climate chambers were connected to a measured value recording system. This is currently not available for the system. However, a connection to a building management system is basically possible and prepared. The entire system was taken out of service in 2024 and finally qualified. The qualification documents can be made available on request. The delivery and installation of the system as well as the technical service were carried out exclusively by ThermoTEC. The client offers the objects mentioned EXW Ex Works "ex works". This means that the dismantling and loading of the objects is the responsibility of the buyer. The system essentially consists of: 2 constant climate chambers made of 80mm PU elements, stainless steel floor and single-leaf revolving door with frame heating 2 chamber fittings for air conditioning consisting of: -Fans for circulating the chamber air -Direct evaporation register with refrigerant R404A, for cooling and dehumidification Lolhsvpu Tlocdwwshg -Electric resistance heating 2*1.5kW Cold steam inlet hoses from the ultrasonic humidifier 2 air-cooled refrigeration condenser units for cooling and dehumidifying the climate chambers. 2 ultrasonic humidifiers with an output of 1kg/h Switch cabinet for controlling and regulating the climate chambers The circulating air of the constant climate chambers is sucked in via the air conditioning unit, processed and blown out via the front. The temperature and humidity sensor mounted in the intake area transmits the actual values of the test room to the respective control circuit of the climate chambers. An independent process controller is installed in the control cabinet front for each control circuit (temperature/humidity). The controllers control the following functions as required: > HEATING with electric resistance heating > COOLING with refrigeration unit and direct evaporation > HUMIDIFICATION with ultrasonic humidifier > DEHUMIDIFICATION with refrigeration unit and direct evaporation The climate chamber temperature and humidity are controlled automatically. Cell type: Tecto cooling and deep-freezing cell Standard WL80 VIESSMANN Dimensions of the climate chambers (KK) 2 each: Outside (WxDxH): 2100 x 3000 x 2310 mm Door dimensions (WxH): 800 x 2000 mm Inside (WxDxH): 1940 x 2840 x 2140 mm Climate chamber 1 25°C/60%RH - A0429_00 - Year of construction: 2005 Climate chamber 2 25°C/60%RH - A0430_00 - Year of construction: 2005

Condition: good (used), Year of construction: 2009, Functionality: fully functional, Climate cabinet for stability tests TCS series climate cabinets are specially designed for storage and stability tests in the chemical-pharmaceutical industry. Test chamber volume: 1060 l Temperature range: 0 to +50 °C Humidity range: 20 to 95% r.h. Internal dimensions W x H x D in mm 610 (2x) x 1500 x 585 Ljlevpu Shehcdwwehg External dimensions W x H x D in mm 1460 x 2105 x 980

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Climatic chamber for stability tests TCS series climatic chambers are specially designed for storage and stability tests in the chemical-pharmaceutical industry. Test chamber volume: 1060 l Lhelhcdovpu I Njwwsg Temperature range: 0 to +50 °C Humidity range: 20 to 95% r.h. Internal dimensions W x H x D in mm 610 (2x) x 1500 x 585 External dimensions W x H x D in mm 1460 x 2105 x 980"

Year of construction: 1999, Condition: ready for operation (used), Year of manufacture: 1999 Parts counter: 33,158,945 Lhelhcdsvl Hc Dowwog Scope of delivery: - gamma 333 - Accessories / spare parts - Attachment for cable in barrel storage

Condition: ready for operation (used), Year of construction: 2005, operating hours: 35,966 h, Functionality: fully functional, machine/vehicle number: 1540501429A, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 20 kVA, torque: 82 Nm, controller manufacturer: SIEMENS, controller model: 840D powerline, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, rotational speed infinitely variable, Maho DMC 635 V lid Lhslhcovga Uiedwwjg Working range Travel X (longitudinal): 635 mm Travel Y (transverse): 510 mm Travel Z (vertical): 400 mm Main drive Drive type: mdigital Speed range (rpm): 8,000 Drive power: 13/9 kW Torque: 82 Nm Tool holder: 40 SK Tool clamping: pneumatic Feed drives Drive type X/Y/Z: digital (AC-controlled) Feed speed: 10,000 mm/min Rapid traverse X/Y/Z: 30 m/min Linear guide X/Y/Z: recirculating roller guide Tool magazine: plate 20-fold

Condition: used, Functionality: limited functionality, machine/vehicle number: C7E 1524H, load capacity: 12,000 kg, lifting height: 2,858 mm, fuel type: gas, mast type: duplex, construction height: 3,010 mm, empty load weight: 14,400 kg, color: yellow, Equipment: cabin, lighting, pallet forks, LPG forklift with pneumatic tires and Krüger weighing system - Lighting system with indicators - Heated double cab - Both doors with sliding windows - New battery installed Typical signs of wear Dimensions without tines: 4,500 x 2,420 x 3,010 mm Tine length: 2,100 mm Weight: 14,400 kg Lift height: 2,858 mm Operating hours: 2,544 hours (read) Lholhcdwjvdnh Sswsg

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 171278, sheet thickness steel (max.): 2 mm, cutting length (max.): 2,550 mm, total width: 3,000 mm, total height: 1,240 mm, total length: 1,780 mm, overall weight: 1,900 kg, type of motor: three-phase motor, The machine was only used for commissioning. Mint condition Year of manufacture: 2022 SerNo.: 171278 Connected load: 4.2 kW Supply voltage: 400 VAC Motor power main drive: 4.0 kW Sheet thickness (max.) - 450 N/mm²: 0.8-2.0 mm Dimensions: 300 x 178 x 124 cm Lslhcsvbwglsdwwohg Weight: 1900 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 4,000 h, Functionality: fully functional, machine/vehicle number: BV1153, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller model: Heidenhain TNC620, total height: 2,900 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, Equipment: chip conveyor, documentation/manual, CNC machining center Lelju Txalohcdwwshg Performance machining center SPINNER VC750 with Heidenhain TNC620 V3-FS Heidenhain TNC620 control and 15-inch color screen Heidenhain KLARTEXT + FK user interface (free contour programming) or DIN/ISO programming Commissioning: 12/2018 Milling spindle up to 12,000 rpm "In-Line" direct drive, 10/ 17 kW and 64/ 108 Nm at 100/ 25% ED Travels: X= 760 mm, Y= 460 mm, Z= 460 mm, 36 m/min Tool taper size 40 according to DNI 69871-A, pull stud according to DNI 69872-A Blow-out device for spindle taper High-speed automatic tool changer as double-arm changer for 24 tools Linear guide in all three axes Required set-up elements on the machine bed for adjustment Splash guard cladding + coolant system + work area light Documentation: Spinner manual and HEIDENHAIN manuals in digital form on CD-ROM Two-color paint finish RAL 7035/5008