Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN Crelqsu R N Hyj Hat Hjb - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK"

Condition: used, Year of construction: 1998, thread dia. 72 mm threading length 200 mm bolt thread from 6 - 72 mm Colq Haov Irh Rjt Hjrb bolt thread from 1/16 - 2 3/4 " inch thread 1/4 - 2 3/4 - 1/16 -2 1/2 " cutting head turning speed 35 + 70 U/min tube thread 16-63 mm tube thread 1/16 - 2 1/2 " total power requirement 2000/2300 Watt weight of the machine ca. 227 kg dimensions of the machine ca. 1,2 x 0,6 x 1,2 m The "REMS Unimat 75" thread cutting machine is a semi-automatic high-performance machine for the efficient cutting of bolt and pipe threads. Working principle: stationary material - rotating head, manual, self-centering vice, pole-changing motor, automatic lubrication cooling, drive via robust planetary gear, right + left running, thread cutting head for chaser cutting jaws. According to the previous owner, the chaser cutting jaws can be regrinded. Enclosed is a 2 x 1 m floor tray which is placed under the machine with 2 grids. The year of construction is estimated. The machine was overhauled by Rems in around 2015 and was hardly used after that because the external threads were produced on other machines. Since then the machine has been in storage and has now been sold. Machine dealer with own stock of 1600 m².

Year of construction: 2005, Condition: ready for operation (used), Control Unit Brand HEIDENHAIN Additional Equipment A traveling steady rest. A ROTA-S plus 250-71 wedge bar chuck from Schunk. Approximately 30 sets of clamping jaws, hard and soft. Ten "Multifix" size C tool holders. Control Unit Brand HEIDENHAIN Additional Equipment A traveling steady rest. A ROTA-S plus 250-71 wedge bar chuck from Schunk. Approximately 30 sets of clamping jaws, hard and soft. Ten "Multifix" size C tool holders. This Gildemeister NEF520 was manufactured in 2005. A reliable horizontal turning machine, it offers robust performance for various machining tasks. Ideal for those looking to enhance their turning capabilities. Contact us for more information. Application Types Crjlq Howhr E Ujat Hjb Turning

Condition: used, Year of construction: 2006, operating hours: 6,500 h, Functionality: fully functional, grinding length: 2,000 mm, grinding width: 600 mm, total length: 2,000 mm, total width: 850 mm, workpiece weight (max.): 2,300 kg, grinding height: 750 mm, grinding wheel diameter: 450 mm, table speed: 40 mm/min, spindle speed (max.): 1,500 rpm, power: 15 kW (20.39 HP), input voltage: 400 V, - Machine in very good condition, with few operating hours. - Additional screen installed for better visibility of axis positions. - Accessories included with the machine: see photos. Crslq Hatewhn Hns Hob -Video available on demand. Installation possible by us: quote available.

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5- K/500 Crelq Hatjv Dtmme Hsb -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm -Accessories: including extensive accessories see photos -Machine dimensions: 2300/1460/H1870 mm -Dimensions accessories: pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Condition: excellent (used), Functionality: fully functional, Driven tools Machine: MORI SEIKI SL2000 NY Manufacturer: SAUTER Item 1 & Item 2 Driven angle tool with collet chuck ER xx DIN Item 1 TYPE ID No.: 0.5.928.206-121345 Com. No. 510/45658/30-007 DIN ISO 15488 – 40 A Cslqowhrm Ss Hat Horb Item 2 TYPE ID No.: 0.5.928.106-12324 Com. No. 550/45656 /4-030 DIN 6499 – 40_A n² = 6000 rpm m = 6.3 kg I = 1.00 Pmax. = 5.5 kW M2 max. 50 Nm Item 3) & Item 4) Axially driven tool for collet chuck TYPE ID No.: 0.5.928.106-121334 Com. No. 550/45656 /4-030 DIN 6499 - 40_A n² = 6000 rpm m = 6.0 kg I = 1.00 Pmax. = 5.5 kW M2 max. 50 Nm ----- Fixed turning tool holders No. 444-222-117 Turning tool holder 25 mm tool holder No. 444-115 Turning tool holder 25 mm tool holder for back machining No. 444-119 Double turning tool holder for main spindle and counter spindle with 1x clamping bar for 25 mm tool steel No. 444-210 Boring bar holder Cylindrical holder ø 32 mm for boring bar holders main and counter spindle Shipping costs upon request No delivery of individual tool holders

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 25001, "General specifications: - Maximum grinding length: 150 mm - Axle height on the bench: 251 mm - Center height from the floor: 1190 mm - Maximum outer diameter of the workpiece: 360 mm - Maximum grindable workpiece length: 200 mm - Maximum loadable weight (at 100 mm): 150 daN - Total installable power: 55 kW - Machine weight: 7000 kg X-axis: - Maximum travel: 330 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Transducer: Linear decoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Z-axis: - Maximum travel: 590 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Converter: Linear encoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Internal electric motor spindle: Cjlqsu Egago Hat Hsrb - Maximum revolutions: 36000 rpm (S6) - Grinding wheel motor power: 22 kW (S6) - Model: FISCHER MFM-1418/36/1HJDN16 - Maximum theoretical peripheral speed of the wheel: 50 m/s Workpiece headstock: - Spindle taper: Morse taper 5 / Asa 8 - Bar capacity: 38 mm - Speed range: 10 - 800 rpm - Torque: 58 Nm - Motor: 20 Nm / 3000 rpm Internal grinding wheel: - Diameter: 138 mm - Thickness: 49 mm - Maximum permissible speed: 6000 rpm Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Full supporting documentation (electronic format) including: Owner's manuals, drawings, certificate of conformity, consumables lists, back up files etc. - Nissan Asset Ref: AF201526 - Acquisition cost €345k+ - Professionally dismantled, marked, packed and stored in Liverpool, UK"

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Crjlq Hovtgn Nsat Hjb Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2007, Additional Equipment Measuring Probe: Renishaw TP20 Crjlq Hatewhr Ips Hjb Probe Change: MCR20 (6 pieces) Software: “ThomControl” (with new software version retrofitted in 2018) This THOME Prazision 3D Sigma was manufactured in 2007. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Consider the opportunity to buy this THOME Prazision 3D Sigma CMM machine. Contact us for more information. Application Types Measuring

Condition: good (used), Functionality: fully functional, Parker Parkrimp II 83 CE Crimping Machine for High-Pressure Hoses (Hydraulic Hoses) Cjlq Hatov Rnnls Horb Pressure force: 125t (at 5,000 PSI max) Suitable for the following fitting series: 43, 71, 77, 25, 26, 81, HY Series (611HT, 801, 836) Weight: 450kg #8247

Condition: good (used), Year of construction: 1998, metal band saw, band saw machine, band saw -Manufacturer: MEP, horizontal band saw with double-sided roller conveyor Celqov R Ucco Hat Horb -Type: Shark 260 -Drive: 1.8 kW -Cutting data flat: 90° 270 x 200 mm / 45° 180 x 190 mm -Cutting data round: 210 x 180 mm -Cutting height: max. 240 mm -Cutting width: max. 270 mm -Saw blade speed: adjustable, 36 - 72 m/min -Saw blade: 2750x27x0.9 mm -Coolant system -Roller conveyor: load capacity 360 kg -Dimensions roller conveyor: 2000/450/H1040 mm / 1000/450/H1040 mm -Machine dimensions: 1250/700/H1480 mm -Total weight: 519 kg

Condition: used, Year of construction: 1992, x-travel 710 mm y-travel 500 mm z-travel 460 mm Crelq Hatjvfyaio Hob Control TNC 407 accessories and equipment: div. Zubehör und Werkzeug total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 4*3*2,5 m Free for a short time from current business resolution ready for operation - see YouTube video ?v=0t82T4F6wVA Otherwise untested, wear and tear due to age and use Equipment: Fixed table 1000 x 500 mm, (12-fold tool changer), electronic handwheel, spray protection cabin, weight 3400 kg. Speed range 40-4000 /min.

Condition: used, Year of construction: 1998, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1998 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390mm MAX. TURNING LENGT 507mm SWING OVER BED 680mm OVER CROSS SLIDE 510mm BAR WORK CAPACITY 51.0mm MAX. SPINDLE SPEED 0--4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES SPINDLE BORE 65mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm Crolq Hatstt Da Is Hjb MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE RENISHAW TOOL SETTING PROBE SWARF CONVEYOR GOOD RANGE OF TOOLING MACHINE MANUALS SWARF BIN MIST EXTRACTOR VERY CLEAN

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances Cslq Haorfw Nhet Hjrb X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Year of construction: 1998, Condition: ready for operation (used), General Data Machine weight 2200 kg Media Chip conveyor Yes Additional Equipment Accessories: 18 saw bands (see photos) Cjlqowhr H Sj Hat Hsrb This KASTO SSB 260 VA-CC-CNC Metal Band Saw was manufactured in 1998. A reliable choice for your cutting needs, it offers precision and durability. Consider the opportunity to buy this KASTO SSB 260 VA-CC-CNC Metal Band Saw. Contact us for more information. Application Types Sawing

Condition: good (used), Year of construction: 2017, Functionality: fully functional, volume flow: 1,000 m³/h, pressing: 10,000 Pa, power: 5.5 kW (7.48 HP), TEKA Filtercube 4N 1000 MV filter extraction system, built in 2017, with pre-filter. Welding fume extraction, room filter, and laser extraction. Motor power: 5.5 kW Flow rate: 1000 m³/h Max. pressure: 10,000 Pa Weight: 350 kg The system can be loaded with a forklift for transport. Celqjv T A H Is Hat Hsrb #8336

Condition: excellent (used), Year of construction: 2006, AMADA AUTOMATION LKI MP 300 Auto Sheet Loader YEAR 2006 SERIAL NUMBER 1119 Max Sheet Size … 3000mm x 1500mm Min Sheet Size … 1000mm x 300mm Sheet Thickness Range … 0.5mm – 6.0mm Maximum Lifting Capacity … 170Kg Cycle Time … 32sec No. Of Raw Material Pallets … 2 off Max Load Per Raw Material Pallet … 3000Kg Maximum Stack Height … 300mm Separation Magnets/Pallet … 3 off Pallet Exchange Time … 25sec Sheet Separation … Sheet Peel and Airblow Double Sheet Detector … Yes Crolswdg I Neq Hat Hjb Stacking Table Load Capacity … 3000Kg Stacking Table Max Stack Height … 400mm Power … 10KVA Air Pressure … 6 Bar Air Flow Rate … 650l/min

Condition: used, Year of construction: 1977, turning diameter over bed 380 mm turning diameter over slide rest 190 mm turning length 1000 mm digital readout 3 Achsen Heidenhain spindle bore 56 mm tailstock quill taper MT MK4 Crslq Haewhqvrot Hsb turning speeds 710/1420 U/min total power requirement 4 kW weight of the machine ca. 1450 kg dimensions of the machine ca. 2200 x 1040 x 1400 mm Lathe Weiler Commodor 40, centre lathe and feed spindle lathe, good condition. Lots of accessories distributed over 2 cabinets. Everything that belongs to the Weiler Comodor goes with. Many Multifix turning holders, collets, 3 jaw chucks, 1x collet chuck holder and much more.

Condition: used, Hare 5iT Hydraulic Press Colq Hatsv Tyuvo Herb Complete with 8 and 4 station rotary table

Condition: excellent (used), Year of construction: 2011, CNC SWISS-TYPE AUTOMATIC LATHE GILDEMEISTER MSL42/7 YEAR OF MANUFACTURE: 2011 CONTROL: FANUC 31i Technical Specifications: Turning diameter 42 mm Max. spindle bore 42 mm Fanuc 31i control Main spindle: Max. speed 5,000 rpm Drive power 7.5 / 5.5 kW Counter spindle: Max. speed 5,000 rpm Drive power 3.7 / 2.2 kW Travel paths: X-axis 1, 2, 3: 60 mm X-axis 4: 130 mm Z-axis 2, 3: 80 mm Z-axis 4: 340 mm Number of axes: 7 Max. acceleration 5 m/s² Rapid traverse 15 m/min Toolholder positions: Crslowhlgxeq Hat Hjb Stationary tool S1/S2/S3: 1/1/4 positions Stationary tool S4: 4 positions Driven stations S2/S4: -/1 position

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand SIEMENS Model Sinumerik Main Drive Number of axis 3 Tools Max weight 5kg Max tool diameter 65 mm Max tool length 220 mm Media Chip conveyor Yes Additional Equipment Coolant Preparation (Filter Fleece) Internal and External Cooling Pendulum Machining Crjlswhr I Ajq Hat Hsb This 3-axis CHIRON FZ 15 L vertical machining center was manufactured in 2002. It offers robust construction and precision engineering, ideal for a variety of machining tasks. If you are looking to get high-quality milling capabilities, consider the CHIRON FZ 15 L machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 7800 This ERNST Neptun EKB was manufactured in 2013. A robust deburring machine, ideal for efficient surface finishing processes. Consider the opportunity to buy this ERNST Neptun EKB deburring machine. Contact us for more information. Application Types Other Sheet Metal Machinery Cslq Haowhr H Eet Herb

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand OKUMA Model OSP E-100M Main Drive Number of axis 4 Additional Equipment Balluf read/write Renishaw MP10 30 Bar coolant Mayfran Consept 2000 Crjlq Hatowfurxe Hsb This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, operating hours: 36,700 h, Control Unit Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Number of axis 5 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm Additional Equipment Infrared Scanner Tool Measurement Flushing Gun Internal Coolant Supply (IKZ): 40 bar Tank with Paper Belt Filter: 900 litres Colq Haev Sfv Ajt Hjrb This 5-axis DMG GILDEMEISTER DMC 125U universal machining centre was manufactured in 2004. Ideal for complex and precise machining tasks, it offers enhanced flexibility and performance. Consider the opportunity to buy this DMG GILDEMEISTER DMC 125U universal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand SIEMENS Cslqov Sfv Ns Hat Hsrb Model Sinumerik 840D Powerline Main Drive Spindle speed range 12000 Movement X-Axis Movement 1250 mm Y-Axis Movement 880 mm Z-Axis Movement 800 mm Additional Equipment Infrared scanner Tool measurement Flushing gun IKZ (internal coolant supply 40 bar) 900 litre tank with paper belt filter This 5-axis DMG DECKEL MAHO DMC 125U was manufactured in 2002. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 125U universal machining centre. Contact us for more information. Application Types Milling