Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 Ijdpfoxgv Ubox Ag Notn Y-Axis Movement 406 Z-Axis Movement 394 This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2017, Excellent Condition Table Diameter - 320mm Max Workpiece size - 400 x 300mm Table loading capacity - 200kg T-slot size - 12 x 90 Travel X/Y/Z - 400/650/485mm Distance from spindle nose to table top - 0-485mm A axis travel (rotate along with X axis) +30 degree C Axis travel (rotate along with Z axis) 360 degree Spindle Spindle speed - Direct drive 12,000rpm Spindle taper - BT40 Spindle motor (cont./30min) - 11/15kW Spindle max. torque (cont./30min) - 70/95Nm Feedrate Linear guideway on X/Y/Z axis - Ball way 35/45/45 mm Rapid Traverse rate on X/Y/Z axis - 36,000 / 24,000 / 10,000mm/min Rapid traverse rate on A/C axis - 20/27rpm Cutting feedrate - 10,000mm/min Tool Magazine Tool Magazine - 24 pocket Max tool diameter / adjacent pocket empty - 80mm Max tool length - 300mm Max tool weight - 8kg Space requirement & weight Machine length x width 2950 x 2350mm Machine height 3140mm Machine weight 7200kg CNC Control - Fanuc 0MP Miscellaneous Pneumatic requirement - 6kg/cm Itodpfxjxmhbas Ag Nen power requirement - 40KVA coolant tank capacity - 400ltr

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Ijdpfxexpil Sj Ag Njtn Swarf Conveyor Coolant Tool Setter Spindle Probe

Condition: used, Year of construction: 1996, MAZAK SUPER QUICK TURN 10 MS CNC LATHE MAKE MAZAK, MADE IN JAPAN MODEL SUPER QUICK TURM 10 MS YEAR 1996 CONTROL MAZATROL T PLUS MAX SWING 435mm SWING OVER CARRIAGE 370mm MAX. MACHINING DIA 230mm MAX. BAR WORK DIA 42mm MAX DISTANCE BETWEEN SPINDLES 705mm SPINDLE MOTOR AC11kw (15HP) SPINDLE SPEED 6000rpm 2ND SPINDLE MOTOR AC5.5kw (7.5HP) 2ND SPINDLE SPEED 6000 rpm ROTARY TOOL MOTOR AC2.2kw (3HP) ROTARY TOOL SPEED 3000 rpm TURRET TOOL CAPACITY 12 TOOLS STATIONS RAPID TRAVERSE RATE X,Z:30m/min (1180IPM),C: 400rpm MACHINE DIMENSION L x W x H, 2705mm x 1465mm x 1835mm MACHINE WEIGHT 3850kg PLUS C-AXIS SUB SPINDLE DRIVEN TOOLS (3 NO.S) PARTS CATCHER SWARF CONVEYOR TOOL SETTING PROBE Itedpfjxnpp Iox Ag Nsn COLLET CHUCK BUILT IN TRANSFORMER FULL SET OF MANUALS GOOD WORKING ORDER

Condition: good (used), Ecoca MT-312/750 CNC Lathe FANUC 21iTB, 12″ Chuck, 2006 Year: 2006 Control: FANUC 21iTB Chuck Size: 12″ (305 mm) – 3-Jaw Swing Over Bed: 600 mm Swing Over Cross Slide: 330 mm Max Turning Diameter: Over Bed: 450 mm (17.7″) Over Cross Slide: 330 mm (12.99″) Z-Axis Travel (Turning Length): 730 mm (28.74″) Spindle Power: 24.8 HP (18.5 kW) Spindle Speed: Up to 3,200 RPM Tool Turret: 12-station Tailstock: Included Ijdpfx Agexpnl Dj Notn Tool Arm: Included

Condition: used, machine/vehicle number: L2SIH0236, turning diameter over cross slide: 700 mm, turning length: 1,500 mm, spindle bore: 80 mm, Leadwell LTC 30 BPL, CNC Turning Centre with Fanuc OT Control, fitted with 300mm dia 3 jaw chuck Made in Japan, approx 700mm swing x 1500mm centre distance, spindle bore 80mm,  operators foot pedal, Serial Number L2SIH0236, swarf conveyor, Itsdpfx Agew A Rqrj Non

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Itedpsxgv T Dsfx Ag Non Brand FANUC Movement X-Axis Movement 762 Y-Axis Movement 516 Z-Axis Movement 570 This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Milling

Condition: excellent (used), Year of construction: 1982, Model D.I. + M.I.A Max width of wheel 250mm/10" Min width of wheel 30mm / 1 1/4" Wheel diameter 508mm Horsepower 30 HP Weight 5900kg Year 1982 Manuals & electrical diagrams included Itsdpow Svrrofx Ag Njn

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Itsdpfxjxm Sxve Ag Non Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: used, Year of construction: 2014, 2014 built Hurco VM30i with single MAX screen Hurco Control. Note: Photographed on Site...more pictures to follow when the machines arrive in Bristol. Fitted with Max control, 10,000 RPM BT40 spindle. In super condition given their age! . Specification: X Axis stroke mm 1.270 Y Axis travel mm 510 Z Axis stroke mm 510 Spindle nose to table surface mm 100-610 T slot (WxDxN) mm 5x18 Itjdpfx Agswzlups Njn Working table area (LxW) mm 1.320x510 Spindle Speed rpm 10.000 Main motor kw 15 Motor torque Nm 102 X/Y/Z Axis cutting feedrate mm/min 24/ 24/ 24 Pull stud SK40 Tool storage capacity pc 20 Max. Tool Diameter mm 89 Max. Tool Length mm 250 Max. Tool Weight Kg 7 Machine weight Kg 4.245 Floor space (LxWxH) mm 4.083x2.743x2.576 Standard configuration Control: WinMax Spindle 10.000 RPM Swing arm type 20 tool ATC Pocket and island milling Rigid tap and tapping Remote Jogbox

Condition: excellent (used), Dugard Mini Mill CNC Vertical Machining Centre Fanuc Oi, 4th Axis, 2011 Year: 2011 Model: MN965005 Control System: Fanuc Oi-MB X-Axis Travel: 450 mm Y-Axis Travel: 350 mm Z-Axis Travel: 380 mm Table Size: 700 × 320 mm Itedpfx Agjxpnlqj Nen Max Table Load: 150 kg Spindle Speed: 80–8,000 RPM Spindle Taper: BT‑40 Spindle Motor: Fanuc Version: 5.5 kW Siemens Version: 8.5 kW (specify if applicable) Toolchanger: 12-position Automatic Tool Changer 4th Axis: Included Rapid Feed Rate: 36 m/min Working Feedrate: Up to 10,000 mm/min

Condition: excellent (used), Year of construction: 2016, XYZ 1550VS Gap Bed Centre Lathe EX Training College Machine 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine Manufactured & Installed 2016 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 1250mm Iedoxn Sf Sepfx Ag Netn Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79010 Machine Serial Number: 7715 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Iodpfx Aoxn I Rwsg Netn

Year of construction: 2024, operating hours: 15 h, condition: like new (used), functionality: fully functional, Imported from china to the uk 2025. Upgraded power, control and control panel wiring to UK/Eu specifications. Brand new and comissioned. fully automated and fully adjustable output to a maximum of 15meters per minute. Saftey pull cord and E stop system installed Iodpfx Agexl U Sco Nstn

Condition: good (used), Year of construction: 2015, Swing over bed 720mm, maximum machining diameter 420mm, maximum machining length 1274mm, bar capacity 77mm, Ijdpfx Agjvgz D Eo Nstn spindle speed 4,000rpm, milling speed 4,000rpm, 12 station turret, Mazatrol smart control, swarf conveyor, parts catcher, tool setter, and 3 jaw chuck, magazine barfeed unit.

Condition: used, Year of construction: 2022, DMG Mori NH5000DCG Horizontal Twin Pallet Machining Centre. S/No. NH503211202 (2022) with F31iB Control, Full B Axis (0.001 deg), Travel X/Y/Z = 730/730/850mm, Rapids X/Y/Z = 50 m/min, Pallet Size 500 x 500mm, 120 Position ATC, Spindle Speed 14,000rpm, Spindle Taper BT40, Magazine Tool Breakage Detection, Hydrajet MS30-1000 High Pressure Coolant, Through Spindle Coolant, Floor Standing Filtermist FX4002 Unit, Swarf Conveyor. Country of Origin: Japan Itsdoxnlf Sjpfx Ag Nsn Location: This lot is located in Tamworth, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Harrison Alpha 1550 XS Manual / CNC Lathe Year: 2018 Control: FANUC Oi-TF Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Swing in Gap: 830mm Itjdpfsxpnk Tox Ag Non Distance Between Centres: 2000mm Spindle Bore: 104mm dia. Spindle Speeds: 1 to 2000 RPM Quick Change Toolpost Boring Bar attachment

Condition: excellent (used), Year of construction: 2014, XYZ 1020 Vertical Machining Centre Siemens 828D Control Manufactured & Installed in 2012 24 Station Too Carousel Iodpfx Agoxndrdo Njtn 8k Spindle Machine Capacity: Table Size: 1120 x 500 X Axis Travel 1020mm Y Axis Travel 520mm Z Axis Travel 540mm Rapid Traverses 20,000m/min Spindle: Spindle Speeds – 8,000ppm Tool Shank ISO40 Tool Storage Capacity 24 Tools Spindle Power 20Hp For sale with Jet Machinery Ltd Machine Serial Number: SMU00143 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 784, Machine Name - CMZ Machine Model - TL25 Y.O.M 2006 S.N 784 Description - Control Fanuc 31i Chuck size 250mm Swing 400mm 76mm spindle bore Max.turning diameter 676mm 12 Station turret Live tooling Sub spindle Swarf conveyor Tool setting probe Itjdpev A Ey Asfx Ag Njn Gantry loader Manuals

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, Isdpsvz A Riofx Ag Njtn table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: used, Year of construction: 1989, Studer Type S40-4 CNC Cylindrical Grinder with Studer Siemens Control, Centre Height 225mm, Centre Distance 1600mm, Wheel Head Slide Max Travel 275mm, Marpass E39 Gauge, Wheel Size 400mm x 80mm x 127mm, Speeds 2 100rpm, Filter Mist. S/No. 7234.22 (1989). Country of Origin: Switzerland A charge of £750 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Itjdpfxexnlg Nj Ag Njn Please Note: This lot is located in Birmingham, UK

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 641, 110v mobile extraction unit Itjdpfx Agowxmhxo Non

Condition: good (used), Year of construction: 2010, Bar capacity 50.8mm, maximum cutting diameter 279mm, maximum cutting length 274mm, Spindle power 11Kw, Spindle speed 6,000rpm, Iedpfx Agoxlch Sj Nstn 12 station turret, fitted with collet chuck, tool setter and magazine barfeed unit.

Condition: like new (used), Year of construction: 2019, operating hours: 1,256 h, functionality: fully functional, machine/vehicle number: HTS.XD.26.A1.0133, Machine Name - Dugard Hanwha Machine Model - XD26H S.N A1.0133 Y.OM 2019 Description - Fanuc i Series control Max Turning diameter 26mm 8000 RPM main and sub spindle Iedpfx Ajwxl Rljg Notn Upto 20 tools can be used LNS Alpha 312 Barfeed

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm Itsdpswxmhlefx Ag Nsn In-built coolant tank with pump and screw auger. Manual vice