Year of construction: 1980, Condition: used, Diameter 360 mm Width 120 mm Bore nicht schwenkbar mm milling head . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Dj Ia Rjiqpy Uo Dr Eskl Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: refurbished (used), Year of construction: 1974, Functionality: fully functional, machine/vehicle number: 04.935, overall weight: 500 kg, input voltage: 400 V, rotational speed (min.): 1,000 rpm, rotational speed (max.): 2,000 rpm, power: 4 kW (5.44 HP), year of last overhaul: 2024, Equipment: rotational speed infinitely variable, Walther Trowal CLS 100 Revised in 2024 Can be seen fully working Dke Ia R Drswhfcys Ejl

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information De Iswgan Uoa R Dr Eokl Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: reconditioned (used), type of input current: three-phase, input voltage: 400 V, welding current (max.): 385 A, Step-controlled MIG/MAG industrial machine Separate 4-roll wire feeder case Integrated control for secondary parameters such as wire feed Plug-in intermediate hose package Soft arc for extremely low-spatter welding of solid and flux-cored wires, for low- to high-alloy materials Oscillating piston pump for optimal cooling Euro-ZE for common torches Technical specifications: Line voltage: 400 V Current range: 40 to 385 A Min. open-circuit voltage: 17.4 - 19.2 V Max. open-circuit voltage: 41.6 - 45.4 V Do Ia R Dewhwx Tsr Eokl Application class: S Protection class: IP 21 Wire feed rate: 1.7 - 18 m/min Voltage steps: 24 Choke taps: 2 Duty cycle: 335 A at 35% 300 Amps at 60% 240 Amps at 100% Weight: approx. 163 kg Scope of delivery: 5 m power cable + 16 A plug, gas hose, short ignition lead, operating instructions

Year of construction: 2008, Condition: used, Technical data See pictures. Dkj Ia R Dsvz H Hbjr Ejl

Condition: used, Functionality: fully functional, Older Automatic saw, works well. it cut 0/60 degrees Dkj Iaswhka Rj R Dr Eol

Year of construction: 1964, Condition: used, serial number 23046 stroke 320 mm +++++ Dks Isfgpdrsa R Dr Ejl Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: repair required (used), Year of construction: 2009, Functionality: unexamined, machine/vehicle number: 45075/09, rotational speed (min.): 985 rpm, rotational speed (max.): 1,480 rpm, power: 3 kW (4.08 HP), Equipment: rotational speed infinitely variable, Rosler R 320 EC De Ia Rjwhdv Eo Dr Eekl Control box is missing and interior cladding needs to be replaced.

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs EUR 118,436.00) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm bore capacity in steel 60 mm max.drill diameter 60 - 300 mm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Do Ia Rjwgagds Dr Eekl Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: reconditioned (used), TIP TIG – All-in-One No matter what welding task needs to be completed, the new TIP TIG All-in-One is ready for it. And much more. It's more powerful than its predecessor and yet incredibly easy to use. The completely redesigned wire feeder looks as impressive as it feels to weld with. TIP TIG All-in-One. Everything you expect from a modern welding system. Just a little, well, better. Features TIG cold wire and hot wire welding with dynamic wire feed system. Dynamic wire feed for a controllable weld pool, even in out-of-position welding. Up to 300% faster welding speeds compared to TIG welding. Up to 400% higher deposition rate. Reduction of dilution by up to 80%. High process reliability and reproducible welding results. Higher welding speed and ease of use. Heat input to the wire for improved deposition performance and an even lower risk of weld defects. Perfect weld appearance, no weld spatter. 4-roller drive for a maximum wire diameter (solid) of 1.2 mm. The All-in-One wire feeder can be used with any TIG welder. Line voltage 110/115/120V AC 220/230/240V AC Frequency 50Hz to 60Hz, single-phase Wire feed speed 0.15 to 17 m/min Dimensions (H x W x D) 525 mm x 352 mm x 600 mm Net weight 34 kg De Ia Rswhwv Ee Dr Eskl

Condition: used, Year of construction: 2014, DMC DL 80V CNC vertical lathe Year of manufacture: 2014 800 mm turning diameter Dko Ia Rsvr Ecpo Dr Esl 750 mm turning length 30 kw 2000 rpm spindle 12-position turret 21" chuck Fanuc Oi-Td control Machine weight 9800 kg With chip conveyor and standard accessories

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Dko Ia Rev N Di Aj Dr Esl Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: used, Year of construction: 1980, table length 550 mm table width 550 mm table swivelabel +/- 90 ° no. of flutes 4 weight of the machine ca. 600 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Dj Ia R Drjgvi I Ae Eekl Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Functionality: fully functional, load capacity: 5,000 kg, Equipment: rotational speed infinitely variable, Used Esab welding roller/manipulator working good. 5000 kg. for each roller Dj Iajwhiugj R Dr Eskl

Year of construction: 1991, operating hours: 50,562 h, Condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik S3 Main Drive Number of axis 5 De Ia R Djwiahmer Eskl This 5-axis Peddinghaus TDK 1000/9E drilling machine was manufactured in 1991. Consider the opportunity to buy this Peddinghaus TDK 1000/9E drilling machine if you are looking to get high-quality drilling capabilities. Contact us for more information. Application Types Other Machine Tools

Condition: good (used), Year of construction: 1998, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain MillPlus, table width: 500 mm, table length: 700 mm, table load: 350 kg, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of slots in tool magazine: 24, Equipment: documentation/manual, The 5-axis DMG DECKEL MAHO DMU 70V eVolution is currently still in production and can also be viewed in operation by appointment at our customer. The machine was given a new spindle approx. 3 years ago! Comes standard with approx. 60 tool holders, excl. machine clamp as shown. Dke Ijwd Hkdsa R Dr Eel Available from July 2025 (subject to delivery of new machine) Total weight approx. 7000kg Dimensions:

Condition: used, diameter 42 - 80 mm length 350 - 520 mm tool adaptor MK4, MK5, MK6 12 twist drills, also available individually: 1 MK6, diameter 80 mm EUR 150.00 1 MK5, diameter 70 mm EUR 90.00 2 MK5, diameter 60 mm EUR 60.00 each 3 MK5, diameter 55 mm EUR 55.00 each 2 MK5, diameter 50 mm EUR 55.00 each 1 MK5, diameter 42 mm EUR 55.00 1 MK4, diameter 50 mm EUR 45.00 1 MK4, diameter 45 mm EUR 45.00 De Iov Dxx Uoa R Dr Ejkl plus VAT Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2009, Functionality: fully functional, 1 used automatic band saw Brand Amada Type HA 250 W Year of manufacture: 2009 Technical specifications: Cutting capacity: Round: 250 mm Square: 250 x 300 mm Max. bundle cut: 200 x 150 mm Saw blade dimensions: 34 x 1.1 x 3505 mm Blade speed, continuously variable: 24 - 90 m/min Table load: 1400 kg Working height: 700 mm Max. feed length per stroke: 370 mm Dks Isv T Tglsa R Dr Ejl Saw blade motor: 3.7 kW Hydraulics: 0.75 kW Coolant pump: 0.18 kW Hydraulic oil tank: 98 l Cutting fluid tank: 180 l Approx. weight: 1500 kg Features: - Automatic material feed - Coolant system - Emergency stop button

Year of construction: 2005, Condition: used, tool adaptor 50 mm driven tools 5 Stück 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. De Iajgtyhro R Dr Eokl Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2011, operating hours: 73,936 h, Condition: ready for operation (used), Control Unit Brand BOSCH Model CML45 This TRUMPF TruMatic 3000 Fiber was manufactured in 2011. A reliable fiber laser cutting machine, it offers precision in cutting a variety of materials. Ideal for those looking to enhance their fabrication capabilities. Contact us for more information. Application Types Cutting Dj Iewiagpea R Dr Ejkl

Condition: used, Year of construction: 1996, Alzmetall Säulenbohrmaschine Type AB35/S Loading 300 mm Dj Ia Rewd E T De Dr Ejkl Aufnahme MK-4 bj. 1996 Var. Geschwindigkeit. Kuhlung.

Condition: used, Year of construction: 1990, Control Heidenhain TNC 355 x-travel 1.000 mm y-travel 400 mm z-travel 450 mm surface area 1.300 x 400 mm feed range 1 - 6.000 mm/min number of spindle speeds 60 - 3.600 U/min vertikal number of spindle speeds 30 - 1.800 U/min horizonta spindle taper SK50 +++++ Do Ia Rjd N Sngs Dr Ejkl Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 780 mm Measurements depth 981 mm Measurements height 1802 mm Main Drive Laser type FIBER Ds Ia Rswiag Ne Dr Ejkl Movement X-Axis Movement 510 mm Y-Axis Movement 190 mm Additional Equipment Laser beam sources: Wavelength 1065 +- 5nm, M²= 1.6, laser protection class 4 Scan head: galvanometer deflection unit, standard: plane field objective F-Theta 160mm, labelling field approx. 120x120mm Laser control interface: Ready for operation, laser start, marking finished, laser emission, emergency off, safety shutdown Cooling: Air-cooled Labelling software: Speedmark Options: Pilot laser 650mm /

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 51228, faceplate diameter: 1,400 mm, total height: 1,500 mm, rotational speed (max.): 315 rpm, Stock number 2052-06921 Machine type: Vertical Turret Lathe - Single Column Make: DöRRIES-SCHARMAN Type: VCE 1600/140 Year of manufacture: 1994 Condition: Used Control type: CNC Storage location: Schiefbahn Country of origin: Germany Delivery time: Immediately after receipt of payment Freight basis: ex warehouse - free on truck Maximum swing diameter: 1750 mm Do Iaswf A Nre R Dr Eekl

Year of construction: 2009, Condition: ready for operation (used), General Data Measurements width 2890 Measurements depth 2460 Measurements height 2185 Machine weight 1300 Main Drive Main motor power Total drive 5.0 kW, Saw motor 3.0 kW Additional Equipment Hydraulic material clamping Coolant system with 2 coolant nozzles Saw blade cleaning with easily replaceable plastic brush This Metal Band Saw was manufactured in 2009. It features a robust design with dimensions ranging up to 2460mm in length and 2185mm in height, and a total weight of approximately 1300 kg. The saw motor is powered by 3.0 kW, supporting a cutting speed from 20 to 110 m/min. It includes hydraulic material clamping and a coolant system with a 65-liter capacity. Ideal for handling material weights up to 400 kg/m. For more information about this Metal Band Saw, please reach out to us. Application Types Sawing Do Iswiah Toa R Dr Eekl