Condition: good (used), Year of construction: 2021, Ref. -No.: 10372 Manufacturer: STAMA Type: MT 733 two plus Year of construction: 2021 Type of control: CNC Control: SINUMERIK Siemens 840 D sl Storage location: Halberstadt Country of origin: Switzerland Turning Speeds: 4200 RPM Spindle Speeds: 12500 RPM Tool Taper: HSK T-63 Workpiece Length: 300 mm X-axis travel: 615 mm Y-axis travel: 290 mm Z-axis travel: 500 mm Max. Tool Weight: 10 kg Max. Tool Diameter: 78 mm Fslridfowh U Uljhogb Max. Tool diameter with 2 free spaces: 140 mm Spindle bearing diameter: 80 mm Number of tools in the chain magazine: 64 Max. Rapid traverse: 65 m / min Max. Feed force: 4000 N Max. Feed force: 8000 kN Acceleration (X): 7 m/s² Acceleration (Y): 9 m/s² Acceleration (Z): 13 m/s² Further information: - Ball screw - Automation - Workpiece loading/unloading chuck parts with X- / Z- gantry loader - Clamping pressure preselection 15 - 50 bar for both spindles - Buffer station for constant short chip-to-chip times - NCU High Performance NCU 730.3.m - Magnetic gripper

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) Folridfewgan Uehegb 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 51228, faceplate diameter: 1,400 mm, total height: 1,500 mm, rotational speed (max.): 315 rpm, Stock number 2052-06921 Machine type: Vertical Turret Lathe - Single Column Make: DöRRIES-SCHARMAN Folridfewf A Nrshogb Type: VCE 1600/140 Year of manufacture: 1994 Condition: Used Control type: CNC Storage location: Schiefbahn Country of origin: Germany Delivery time: Immediately after receipt of payment Freight basis: ex warehouse - free on truck Maximum swing diameter: 1750 mm

Condition: used, Year of construction: 2014, DMC DL 80V CNC vertical lathe Year of manufacture: 2014 800 mm turning diameter 750 mm turning length 30 kw 2000 rpm spindle Fgsljvr Ecpjridfheb 12-position turret 21" chuck Fanuc Oi-Td control Machine weight 9800 kg With chip conveyor and standard accessories

Condition: good (used), Year of construction: 1998, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain MillPlus, table width: 500 mm, table length: 700 mm, table load: 350 kg, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of slots in tool magazine: 24, Equipment: documentation/manual, The 5-axis DMG DECKEL MAHO DMU 70V eVolution is currently still in production and can also be viewed in operation by appointment at our customer. The machine was given a new spindle approx. 3 years ago! Comes standard with approx. 60 tool holders, excl. machine clamp as shown. Fgolrswd Hkdsidfhob Available from July 2025 (subject to delivery of new machine) Total weight approx. 7000kg Dimensions:

Year of construction: 2008, Condition: used, Technical data See pictures. Fgslridovz H Hbofhjb

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Fjlewh U Uferidfhegb Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs EUR 118,436.00) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm bore capacity in steel 60 mm max.drill diameter 60 - 300 mm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Fgslrswgagdjidfhob Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: used, diameter 42 - 80 mm length 350 - 520 mm tool adaptor MK4, MK5, MK6 12 twist drills, also available individually: 1 MK6, diameter 80 mm EUR 150.00 1 MK5, diameter 70 mm EUR 90.00 2 MK5, diameter 60 mm EUR 60.00 each 3 MK5, diameter 55 mm EUR 55.00 each 2 MK5, diameter 50 mm EUR 55.00 each 1 MK5, diameter 42 mm EUR 55.00 1 MK4, diameter 50 mm EUR 45.00 1 MK4, diameter 45 mm EUR 45.00 plus VAT Machine dealer with own stock of 1600 m². Fgjlridfev Dxx Ushob

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 31-44367, Gebr. Horizontal CNC machining center Make: HELLER Type: MC16 Folrietq Tnmedfhogb Year of manufacture: 2000 P/N: 31-44367

Condition: used, Year of construction: 1996, Alzmetall Säulenbohrmaschine Type AB35/S Loading 300 mm Aufnahme MK-4 bj. 1996 Var. Geschwindigkeit. Fslrowd E T Djidfhsgb Kuhlung.

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Felsv N Di Asridfhsgb Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: good (used), Year of construction: 2007, Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Type: HEC 630 Athletic Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Storage location: Halberstadt Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Fgolriswh U T Ujdfheb Weight Of The Machine Ca.: 25 t

Year of construction: 1991, operating hours: 50,562 h, Condition: ready for operation (used), Control Unit Brand SIEMENS Fslridfowiahmehogb Model Sinumerik S3 Main Drive Number of axis 5 This 5-axis Peddinghaus TDK 1000/9E drilling machine was manufactured in 1991. Consider the opportunity to buy this Peddinghaus TDK 1000/9E drilling machine if you are looking to get high-quality drilling capabilities. Contact us for more information. Application Types Other Machine Tools

Condition: new, Year of construction: 2024, sheet width 1020 mm plate thickness 2,5 mm distance between columns 1045 mm Fslridewgn Amsfhsgb daylight opening max. 47 mm bending angle max. 135 ° weight of the machine ca. 290 kg dimensions of the machine ca. 1,35 x 0,86 x 1,17 m Unused exhibition machine at a special price: Sengmentable upper rail, upper clamping foot-operated, manual bending clamping operate. The bending performance refers to 380 N/mm² strength. This is an exhibition machine at a special price, so we are selling it without any warranty. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2015, operating hours: 15,000 h, machine/vehicle number: GM4638/01-01, Give. CNC horizontal machining center Make: GROB Fgoleq Ebbderidfheb Type: Truck rear axle machining center

Condition: good (used), Year of construction: 2009, Functionality: fully functional, 1 used automatic band saw Brand Amada Type HA 250 W Year of manufacture: 2009 Technical specifications: Cutting capacity: Round: 250 mm Square: 250 x 300 mm Max. bundle cut: 200 x 150 mm Saw blade dimensions: 34 x 1.1 x 3505 mm Blade speed, continuously variable: 24 - 90 m/min Table load: 1400 kg Working height: 700 mm Max. feed length per stroke: 370 mm Saw blade motor: 3.7 kW Hydraulics: 0.75 kW Coolant pump: 0.18 kW Hydraulic oil tank: 98 l Cutting fluid tank: 180 l Approx. weight: 1500 kg Felridfjv T Tglshsgb Features: - Automatic material feed - Coolant system - Emergency stop button

Condition: good (used), Ref. -No.: 10319 Manufacturer: TAKANG Type: TK 430 Type of control: Digitalanzeige ACU-Rite Fgjlriewh U T Ijdfheb Control: Konventionell Storage location: Halberstadt Country of origin: Taiwan Swing diameter over bed: 430 mm Bed width: 300 mm Tip length: 1500 Centre Height: 215 mm Bed length: 1600 mm Weight Of The Machine Ca.: 1,3 t

Condition: ready for operation (used), Year of construction: 2011, operating hours: 73,936 h, General Data Measurements width 7875 mm Folrowiagpsidfhogb Measurements depth 6600 mm Measurements height 2230 mm Machine weight 13000 kg Control Unit Brand BOSCH Model CML45 Movement X-Axis Movement 2550 Y-Axis Movement 1270 Additional Equipment Number of protective tools: 18/2/1/ Number of clamps: 2/4 This TRUMPF TruMatic 3000 Fiber was manufactured in 2011. Equipped with a 3000 W TruDisk 3001 laser, it offers a generous working range of 2550x1270 mm for both punching and laser operations. Capable of handling workpieces up to 120 kg and sheet thicknesses of 4.0/6.4 mm, it achieves a max punching force of 165 kN. With ample tool capacity, featuring 21 linear magazine slots, consider the opportunity to buy this TRUMPF TruMatic 3000 Fiber punch-laser combination machine. Contact us for more information about this machine. Application Types Cutting

Condition: good (used), Year of construction: 2005, Ref. -No.: 10314 Manufacturer: PINACHO Type: S-90/ 310-155 Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Bar passage: 90 mm Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Cross Movement. (X-Axis): 365 mm Tailstock Quill Diameter: 72 mm Fgelridjwh U Tzefheb Turning diameter over cross slide: 880 mm

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Fgslridewh U Tuofhob Grinding Wheel Width: 80-100 mm

Condition: good (used), Year of construction: 2012, Ref. -No.: 10290 Manufacturer: KOLB KLUEPPELBERG Type: Cubimat YC 2000 Year of construction: 2012 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Fgelridfswh U Tnohob Machine number: 016453-20.1 X-Travel: 7000 mm Y-Travel: 4000 mm Z-Travel: 4000 mm W-Travel: 2.000 mm Speed work spindle: 4.000 RPM Max. Torque: 2.100 Nm Max. Workpiece Weight: 20 t Table-Size (Lxw): 2.800 x 2.000 mm Tool Taper: SK 50 Distance Between Columns: 3.200 x 4.000 mm Further information: 4 Milling Heads available.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 600 Pcs./pcs. Spindle Speed: 20.000 RPM Max. Torque: 8.600 Nm Feed Speeds X/Y/Z Axis: 60.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm Folridfewh U Thshsgb 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10286 Manufacturer: STARRAG HECKERT Type: HEC 1600 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 24139 X-Travel: 2800 mm Y-Travel: 2100 mm Z-Travel: 1900 mm Table Dimensions (Lengthxwidth): 2 x 1.250 x 1.600 mm Table Load: 8.000 kg Max. Tool Weight: 35 kg Workpiece Diameter At Full Load: 110 mm Tool Piece Magazine With: 240 Pcs./pcs. Turning Speeds: 20 - 9.000 RPM Tool dimensions (with occupied adjacent spaces): 125 mm Rapid Travel X/Y/Z: 40.000 mm / min Fgjlridfowh U Tbshjb Weight Of The Machine Ca.: 35 t Numbers Of Pallets: 2 pallet change time: 60 s Further information: internal coolant supply

Condition: good (used), Year of construction: 1974, Ref. -No.: 10159 Manufacturer: KELLENBERGER Type: 1000 U Year of construction: 1974 Storage location: Halberstadt Fgjlridfjwh U S Rshsb Country of origin: Schweiz Grinding Length: 1000 mm Grinding Diameter: 250 mm