Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Nedpfx Ahoig T Amo Ejdc Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: good (used), Year of construction: 2015, Swing over bed 720mm, maximum machining diameter 420mm, maximum machining length 1274mm, bar capacity 77mm, Ndedpfx Ahevgz D Eo Eec spindle speed 4,000rpm, milling speed 4,000rpm, 12 station turret, Mazatrol smart control, swarf conveyor, parts catcher, tool setter, and 3 jaw chuck, magazine barfeed unit.

Condition: good (used), Year of construction: 2000, MORI SEIKI SH-503/40 TWIN PALLET CNC HORIZONTAL MILLING MACHINE WITH MORI SEIKI MSX-502III CONTROL UKUK Pallet Dimension 500 x 500mm. Maximum Table Load 1,000kg. Axis Travel X'=630mm, 'Y'=600mm, 'Z'=650mm, 'B'=1° Increment. Rapid Traverse 'X,Y,Z'=32m/min. Spindle Taper BT40. Maximum Spindle Speed 12,000rpm (22kW Motor). 120 Position ATC. Maximum Tool Ø150mm (Without Adjacent Tools), Maximum Length 360mm, Maximum Tool Weight 12kg. S/No. 1212 (2000). DESCRIPTION With Renishaw OMP 600 Spindle Probe, Blum Laser Tool Setting/Breakage Unit, Dual Auger To FSE Chip Conveyor, Through Coolant Filtration System, Oil Chiller, Filtermist Mist Extraction Unit, Handwheel & Signal Tower. Overall Dimensions L4,500 x W2,725 x H3,267mm. Weight 14,900kg. Note: Tooling & Tombstones Not Included. Ndedpoxqt Tiefx Ah Ejc

Condition: good (used), operating hours: 8,661 h, Cosen AH-300H Automatic Horizontal Bandsaw Ndsdpoxq Ap Hjfx Ah Ejc Variable Speed Drive, 27-80 Metres/Minute; Auto Hydraulic Blade Tensioner; Split Vice Jaw; 5HP Motor, 415 Volt. 8661 Blade Size 12'6" Long x 1.1/4" (34mm) Wide; Weight Approx 1,500kg; Maximum Material Size to Cut: Round & Square 300mm, Rectangular 300mm x 340mm; Feed Table with Dimensions Approx 400mm Wide x 2 Metres Long; Enclosed Safety Cage;

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used press brake by Darley Njdpsxq Dfvjfx Ah Eodc Type EHP 50 20 15 Capacity 2050 x 50 tons Equipped with new Esa S630 control and Merlino lasersafe Includes set of tools

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand OKUMA Model OSP-P200M Main Drive Spindle speed range 15000 rpm Movement X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 625 This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2005. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine. Ndjdpexq Hr Esfx Ah Eec Application Types Milling

Condition: refurbished (used), Bystronic PR10 320 ton x 7200 mm . 5 Axis Back Gauge X. R.Z1. Z2.X1. Hydraulic Crowning. 100 mm Extended Daylight &Stroke. Akas Laser Guarding. Cybelec DNC 1200 Colour Graphic Control. Tooling to be Agreed Nsdpoxqr R Tsfx Ah Ejdc

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Nsdpfx Ahovz A Rij Esdc Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: ready for operation (used), travel distance Z-axis: 585 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, controller manufacturer: Mazak Fusion M640, total height: 3,546 mm, total length: 3,274 mm, total width: 8,100 mm, empty load weight: 19,000 kg, passage width: 860 mm, Paletchanger 2 tables High pressure cooling 15 bar Scrapconveyor Protectioncover in Alu synchrone tapping EIA/ ISO input Max workpiece dimensions: 3240 x 880 x 640 mm Njdpfxjxqr U Es Ah Eedc Table dimensions: 3240 x 750 mm Max weight on the table: 3 ton Admission in spindle (ISO): ISO 50 Power on the spindle: 30 kW Number of toolholders: 40 tools Number of rotations: max 6000 rpm Number of pallets: 2x 750 x 3240mm

Condition: good (used), Murata Muratec Wiedemann Centrum C-2500 Turret Sheet Metal Punch Press With Muratec CNC Control, Fanuc Series O-P. 196kN Punch Capacity. AC Servo Motor; 1,250mm x 1,280mm Maximum Sheet Size; (22) Turret Station; Ram Stroke 30mm; Steel Ball Table Size 1,600mm x 3,200mm; Hydraulic Clutch & Brake; Hit Rate 200 HPM; Max Tool Dia. 76mm; 2-Station Auto Index Tool; 22-Turret Stations; Throat Depth 1,300mm; Max Punch Thickness 6mm; S/No. EC2508 Nsdexq Akdspfx Ah Eedc Weight Approx 8,900kg; Dimensions Approx 2,700mm x 4,700mm; Table Height 965mm; 415 Volt. Plus Quantity of Tooling in Cabinet; Foot Switch Control. Sick WSU & WEU Safety Sensors. Modular Safety Cage.

Condition: good (used), TigerStop / TigerCalvet Electronic length stop Nsdpfjxqzawex Ah Ejdc • Positioning length: 6.8 meters • Repeat accuracy: +/- 0.1 mm • Maximum positioning speed: 60 m/min • Can also be used as a pusher up to 80 kg • Drive: 32 mm steel-reinforced belt • Controlled via the Tiger Calvet system TigerStop 5.301, version TigerCalvet 4.6.8.7196

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP-P200L Nsdexq Ht Ajpfx Ah Ejdc This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2016, XYZ 1550VS Gap Bed Centre Lathe EX Training College Machine 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine Manufactured & Installed 2016 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 1250mm Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #79010 Machine Serial Number: 7715 Cost: £9,950.00 + VAT Njdoxn Sf Sopfx Ah Esdc Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2010, Bar capacity 50.8mm, maximum cutting diameter 279mm, maximum cutting length 274mm, Spindle power 11Kw, Ndjdpfx Aoxlch Sjh Eoc Spindle speed 6,000rpm, 12 station turret, fitted with collet chuck, tool setter and magazine barfeed unit.

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Nsdpfx Ahjxn I Rwo Esdc

Condition: used, Used Bode - T-slot clamping table Nsdpfx Ahsxqpf Uj Esdc Length x Width x Height = 6500 x 1500 x 300 mm The table has a small damage at the end (see photos)

Condition: ready for operation (used), Year of construction: 1994, Control Unit Brand FANUC Model Series 16-M Movement X-Axis Movement 400 Y-Axis Movement 300 Z-Axis Movement 300 This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine. Ndjdpfx Aoxqtaioh Ejc Application Types Milling

Condition: good (used), Used Bode - T-slot clamping table Length x Width x Height = 4000 x 1500 x 200 mm Nedpfx Aexqpctoh Eedc

Year of construction: 1998, operating hours: 45,996 h, condition: ready for operation (used), General Data Measurements width 1750 mm Measurements depth 3210 mm Measurements height 1750 mm Machine weight 5500 kg Control Unit Brand HEIDENHAIN Model CNC Pilot Nodpfxsxqtbts Ah Eedc Movement Z-Axis Movement 635 This Gildemeister CTX-400S2 was manufactured in 1998. A robust horizontal turning machine featuring a HEIDENHAIN CNC pilot control unit, it offers a Z-axis movement of 635 mm and can handle workpieces up to 570 mm in diameter. With a machine weight of 5500 kg and dimensions of 3210x1750x1750 mm, it's built for stability and precision. Consider the opportunity to buy this Gildemeister CTX-400S2 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Used circular saw machine by Kaltenbach Type: KKS 400 H Saw blade ø 400mm Nodpfx Ahoxqn Tds Ejdc Includes infeed and outfeed roller conveyor with manual measuring system

Condition: ready for operation (used), Year of construction: 2000, General Data Ndedpfoxqtb Hjx Ah Eec Machine weight 3500 kg Movement X-Axis Movement 8000 Y-Axis Movement 500 Z-Axis Movement 220 This 3-axis Tekna TK 427/8 CNC milling machine was manufactured in 2000. It features a substantial travel range with 8000 mm on the X-axis, 500 mm on the Y-axis, and 220 mm on the Z-axis, weighing 3500KG. If you are looking to get high-quality milling capabilities, consider the Tekna TK 427/8 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 1996, Used semi-automatic bandsaw from Kaltenbach Model: HBM 360 (geromat) Capacity: 360 x 305 mm Ndsdpfx Ahoxqnnhj Eoc Year of manufacture: 1996 Includes extra saw blades Includes 2 feeders, 1 with digital readout 45° and 60° cutting capability Saw blade dimensions: 3830 x 27 x 0.9 mm Band speed: 16 - 100 m/min

Condition: used, functionality: fully functional, Year of construction: 2010, Used 3 meter guillotine shear by Durma Model: VS 3010 Capacity: 3100 x 10 mm Delem DAC 350 control Electric backgauge Nedpfoxqm Tpex Ah Eodc Electric cutting angle adjustment Pneumatic high support table Year of manufacture: 2010

Condition: like new (used), functionality: fully functional, Year of construction: 2023, As-new Arboga guillotine shear Type: MSS 1250 40 M Capacity: 1250 x 4 mm Year of manufacture: 2023 Electric back gauge Electric cutting length adjustment Pneumatic high support table Ndjdpfx Aexqm Nqsh Eoc Return to sender system

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Used swing bending machine from Arboga Nedpjxqm Itjfx Ah Eodc Type: Multibend 1000s Capacity: 1000 x 2.5 mm Year of manufacture: 2022 Incl. tool set (not complete, we can order a new one if needed*)