Condition: good (used), Year of construction: 1998, Functionality: fully functional, Mazak SQT-250 CNC Lathe Year: 1998 With tailstock and conveyor Supplied with several tools With all documentation Djbsv Srmuj Hdn Iijkl In good condition

Condition: good (used), Year of construction: 1990, Functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 20 rpm, table width: 1,000 mm, table load: 10,000 kg, table length: 3,000 mm, tool mount: 50 mm, CNC bed milling machine Manufacturer Zayer Type KF3000 Year of manufacture 1990 Control Heidenhain TNC 415 Clamping surface 3000 x 1000mm Travel paths X/Y/Z 2700/1250/1000 Table load 10,000kg Tool holder SK50 The machine is in good used condition Dkebevmbhke Hdn Iisl

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, worktable length: 6,400 mm, worktable width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Djb Hjwhk E Hedn Iiekl Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: ready for operation (used), Year of construction: 2011, operating hours: 6,692 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 3 Additional Equipment Changing table available 24+1 tools in ATC Djb Hdev Hh Taon Iiokl This 3-axis WEMAS VZ 860 APC vertical machining centre was manufactured in 2011. Ideal for precision machining, it features robust construction and reliable performance. Consider the opportunity to buy this WEMAS VZ 860 APC vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2006, x-travel 760 mm y-travel 560 mm z-travel 560 mm control 840 D Powerline Siemens tool taper SK 40 numbers of tools in magazin 60 Dkeb Hdowfhq Usn Iisl spindle turning speed - stepless 0- 12000 U/min size of pallet 630 x 500 mm total connected load 64,2 KVA feed stepless 20- 15.000 mm/min rapid traverse 50 m/min total power requirement 26 kW weight of the machine ca. 12 t dimensions of the machine ca. 5,2 x 4,5 x 2,45 m 5 axes machining center with rotating table (C) and swiveling head (B). Machine has a pallet changing system with 2 pallets and an ATC with 60 positions. Machine has worked 20.000 spindle hours and was always well maintained.

Condition: new, Year of construction: 2025, Functionality: fully functional, Buy your Fiber Laser delivery time 6/8 weeks buy or financial lease via Danmar Machines BV FIBER LASER METAL CUTTING MACHINES Quality, advanced CNC Laser cutting machines for sheet material and tube lengths. Quickly and accurately cut materials in the right shape with a CNC Fiber Laser. Danmar Machines Fiber Laser machines are produced in Asia. Fast production lead time so fast delivery. Buy CNC Fiber Laser € 34,500,--* Working area: 1,500x3,000 mm* ( 4,000x2,000 - 6,000x2,000 ) Laser strength: 1,500* - 3,000 - 4,000 - 6,000W Metal cutting machines for comparison Carbon steel (Carbon steel) 1-30mm Dkob Hdowgxq Ujn Iiel Stainless steel (RVS) 1-22mm Aluminum 1-16mm Brass 1-16mm Copper 1-8mm Contact us for more information, prices and delivery time.

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Mazak SQT-250MS + GL-100C CNC Lathe Dkobsv Srg Us Hdn Iisl 3-Axis with Motorized Tooling Year: 1998 With GL-100C Loading Robot Supplied with several tools and motorized tools with all documentation In good condition

Condition: good (used), Year of construction: 2002, Universal - travelling column - milling machine Manufacturer Kekeisen Type UFX 4000/20 Year of manufacture 2002 Control Heidenhain TNC530 Travel paths X/Y/Z 4000/1200/2000 C axis 360° Clamping surface 4200 x 1800mm Universal milling head with 2 swivel axes 2 gear stages 20 - 960rpm 960 - 4000rpm Tool holder SK50 30-way tool changer Dkob Hovmbd Ejdn Iijl Installation dimensions 6400 x 2900 x 4400mm Service and spare parts from F + B Laupheim no problem.

Condition: used, knife sets for a press brake Dob Hdewgppzen Iiskl total 3 sets of upper knives (total 12 knives of 835mm long) 2 sets of lower knives. (total 8 dies of 835mm long) 1 x divisible upper beam 1 x bending block set the mentioned price of €3500 is for the entire lot together. for the dimensions of the mounting for the upper knife see image

Condition: ready for operation (used), Year of construction: 2003, operating hours: 54,027 h, Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 450 mm Z-Axis Movement 300 mm Additional Equipment Djbjv N Rzfo Hdn Iiskl Pallets: 6, with dimensions 320x320 Pallets ITS 50 (Elektroder): 54 This 5-axis Roders RFM 600 DSP was manufactured in 2003. A vertical machining centre, it offers robust capabilities for precision engineering. Consider the opportunity to buy this Roders RFM 600 DSP vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2013, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Control S 840 DSL x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min Dkebswfhq Io Hdn Iijl main drive 37(48) kW feed in x - axis 0- 45 m/min feed range Z-direction 0- 30 m/min work piece power 19 kW toolpiece turning speed range 0- 6000 U/min total power requirement 60 kW weight of the machine ca. 12 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck and tool holders.

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, CNC milling machine Portal milling machine type Nesting working area X-axis 2,600mm working area Y-axis 1,300mm working area Z-axis 200mm drive Servo Vacuum table Vacuum pump 100M3/H AdTech CNC Controller UcanCam CadCam Software V11 Standard Endless possibilities: milling, relief, photos, Fusion, contours, smoothing oak leaves, milling DXF- DWG- Logos, ...,.. and much more Dkob Hdjv T Akysn Iiel in materials: mdf, melamine, carbon, Trespa, dibon, Alucarbon, PP, PPE, wood,

Condition: used, cutting diameter 250 mm saw band length 3660 x 27 x 0,9 mm cutting width 400 mm engine 1,0 KW Dksb Hev Nq Tnedn Iijl motor speeds: 1400 U/min cutting speed 20 - 70 m/min weight of the machine ca. 0,5 t dimensions of the machine ca. 1,55 x 1,0 x 1,2 m

Condition: used, Year of construction: 2002, weight max. 10 / 20 (einzeln / Satz) t workpiece diameter Ø250 - Ø4600 mm gear diameter 380 mm Dkob Hdn Iewg Hpreiol turning speed drive gear steples 130 x 1300 mm/min total power requirement 2x 0,75 kW weight of the machine ca. 750 kg / 500 kg Steel rollers, dia. 380 mm Idle rollers with motor driven displacement of rollers Continously variable speed of drive rolls

Condition: used, Year of construction: 1992, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, X-axis (longitudinal) 1000 mm Y-axis (transverse) 400 mm Z-axis (vertical) 450 mm Table length 1400 mm Dkob Hdn Iswgpn Reisl Table width 400 mm Max. table load capacity 800 kg spindle mount ISO 50 mitutoyo digital readout spindle speed: 35.5 - 1800 rpm total machine power: 11 kW hydraulic tool clamping. year of construction 1992 weight approx. 4500kg

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 5952 Measurements depth 3341 Measurements height 2591 Machine weight 5700 Control Unit Brand Matsuura Model G-Tech 18i Main Drive Spindle speed range 50 - 15,000 Spindle motor power 7.5/15 kW (constant/40%) Tool taper BT 40 Big Plus Movement X-Axis Movement 500 mm Y-Axis Movement 560 mm Z-Axis Movement 500 mm Table Outer length 300 mm Outer width 300 mm Table load 250 kg Additional Equipment Linear guides Ultra-precision ball screws for feed movements Chip flow system Coolant unit Synchronized tapping Hydraulic unit Spindle oil cooler Machine mounts Dsb Hdnsurz I Rj Iijkl This 4-axis Matsuura H.PLUS-300 horizontal machining center was manufactured in 2011. It features a high-speed spindle capable of 15,000 rpm, a robust 51-tool automatic tool changer, and a dual pallet system for efficient workflow. The machine supports a maximum workpiece weight of 250 kg and offers rapid traverse rates up to 60,000 mm/min. Ideal for precision machining, buy this Matsuura H.PLUS-300 horizontal machining center. Contact us for further details regarding this horizontal machining center. Application Types Milling

Condition: used, Year of construction: 2012, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Control S 840 DSL x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min main drive 37(48) kW feed in x - axis 0- 45 m/min feed range Z-direction 0- 30 m/min work piece power 19 kW toolpiece turning speed range 0- 6000 U/min Deb Hdewfhqzon Iijkl total power requirement 60 kW weight of the machine ca. 12 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck and tool holders.

Condition: used, Functionality: fully functional, Hydraulic used sawing machine Engine power --- 1.1 kW Saw band size --- 2700 x 27 x 0.9 mm Dkeb Hdnewgyi Ej Iijl Cutting speed --- 27 - 53 m/min Saw arm adjustment --- 0° ~ 60° Cutting capacity -45° Ø 220 mm ■ 180 x 220 mm Cutting capacity 0° Ø 250 mm ■ 280 x 220 mm Cutting capacity 45° Ø 210 mm ■ 180 x 220 mm Cutting capacity 60° Ø 130 mm ■ 110 x 200 mm Weight --- 350 kg Including 3 new bimetal saw bands 2700 x 27 x 0.9 mm 5/8

Condition: new, bore capacity in steel (diameter) 45 mm quill stroke 125 mm 560 mm 230 mm table surface area 800 x 240 mm spindle turning speed range 75 - 3200 U/min Djb Hjupxrnodn Iijkl max. milling cutter diameter 80 mm spindle taper ISO 30 max. distance between table and spindle-nose 460 mm throat 230 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 580 Kg dimensions of the machine ca. 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.

Condition: excellent (used), Year of construction: 2007, Model: AD-S2060 Serial Number: 7301072843 Technical Specifications: Press Capacity: 60T Bending Length: 2050mm Distance Between Columns: 1700mm Rapid Traverse: 200mm/sec Bending Speed: 10mm/sec Retraction Speed: 120mm/sec Stroke: 265mm Thrust: 415mm Oil Tank Capacity: 100L Length: 4375mm // Width: 2650mm // Height: 2745mm Weight: 6000kg Electrical Information: Supply Voltage: 3x400V Panel Supply Current: 25A Motor Supply Current: 15.5A Supply Cable Diameter: 4 x 2.5mm Insulation Resistance: 1 M OHM Test voltage: 1000V Dob Hdnowifnle Iijkl Control voltage: 24V Frequency: 50Hz Control: ModEva 10 Tools available, please inquire in advance! Test reports available, last tested in April 2024 - passed.

Condition: reconditioned (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, spindle speed (max.): 3,000 rpm, table width: 1,200 mm, tool mount: 50 mm, power: 0.028 kW (0.04 HP), SORALUCE TR-25 included installation and commissioning Year of manufacturing: 2002 Capacities / travel: Axis (X): mm 2.500 Vertical (Y): mm 1.600 Ram (Z): mm 1.200 Table size: Length: mm 2.860 Width: mm 1.200 Painting: RAL 5005 and RAL 7035 Tool taper: ISO 50, DIN 69871 Form AD Main Spindle Drive: Power: 100 % ED KW28 Spindle speed range: Spindle speed: rpm-1 20-3.000 Feeds: X-, Y- und Z-Axis mm/min 2 – 12.000 Max. rapid traverse speed: X-, Y- und Z-Axis mm/min 15.000 Weight: kg 22.200 Heidenhain 426 Heidenhain CNC control 426M with digital drive technology, electronic handwheel HR410 Automatic Milling Head, Diagonal H26 Automatically indexing Soraluce "Diagonal" milling head, type H26 including a long spindle for internal coolant supply. 2.5° division in both joints and speeds up to 3000 rpm. Clamping via Hirth serration in both joints. Repeatability of +/-3 sec. or 0.002mm. FAG spindle bearing with steel balls. Includes air lock. Chip Conveyor Automatic Tool changer: Maximum Tool Diameter: 125 mm Max. Tool Diameter with Adjacent Slots Free: 250 mm Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Number of Magazine Slots: 40 Coolant lubrication system internally cooling 3D thermal expansion compensation Splash guard Our product line: RepairFIT RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line have been procured by us following a strict selection process and have undergone a thorough examination (Deep-Dive-Check). After intensive cleaning, any detected and obvious defects or errors have been professionally repaired by our expert service team. What does this mean for you? A RepairFIT offer is ideal for you if you're looking for a used machine while also wanting guaranteed process safety. With this option, you receive a high-quality CNC milling machine that is immediately ready for error-free operation. With our professional service technicians, we implement the commissioning in your premises in the shortest possible time. You can start production right away. This is a clear difference from an ordinary used machine purchase. This solution offers you guaranteed process and planning reliability at an attractive fixed price Project Execution: Debsrp H D Tj Hdn Iiokl Benefit from our turnkey project execution, which is included in all lines: Our team of experts provides comprehensive support in optimally determining the machine's location, creating a professional layout, and fully integrating it into your manufacturing process. We ensure that your CNC milling machine is expertly installed, commissioned, and precisely aligned according to the manufacturer's specifications! All from a single source, in the end, simply a process-reliable machine that does what it's supposed to do.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 6,634 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 3 Additional Equipment Machine comes with changing table Plenty of accessories available that can be sold additionally 24+1 tools in ATC This 3-axis WEMAS VZ 860 APC vertical machining center was manufactured in 2012. Ideal for precision machining, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the WEMAS VZ 860 APC machine we have for sale. Contact us for more information. Application Types Milling Dkob Hdn Ijv E Smneiel

Condition: reconditioned (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, table width: 1,000 mm, table load: 5,000 kg, table length: 3,000 mm, overall weight: 16,500 kg, year of last overhaul: 2024, RepairFIT by Dornhöfer The Difference. Deb Hdouq Episn Iijkl Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2005 Capacities / Travel: Longitudinal (X): 3,000 mm Vertical (Z): 1,000 mm Transverse (Y): 1,000 mm Table size: Length: 3,200 mm Width: 1,000 mm Number of T-slots on the table surface: 7 T-slot width: 22H12 mm Max. table load: 5 t/m² Paint finish: RAL 5010 and RAL 9002 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle KW30 Spindle speed range: Spindle speed: min-1 20-3,000 Speed control: via gear box Feed rates: X, Y, and Z axes mm/min 4,000 Max. Rapid traverse speed: X, Y, and Z axes mm/min 10,000 Weight: approx. 16,500 kg BASIC MACHINE EQUIPMENT: HEIDENHAIN iTNC 530 HSCI Manual diagonal head Chip conveyor Cooling lubricant system with 20 bar & (IKZ) RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified were professionally repaired by our expert service team.

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team. Dsb Hdnev Rw Uue Iijkl

Condition: reconditioned (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, spindle speed (max.): 6,000 rpm, coolant supply: 20 bar, RepaitFIT+ by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2015 Capacities / Travel: Longitudinal (X): 8,000 mm Vertical (Y): 3,000 mm Transverse (Z): 1,500 mm Main spindle drive: Motor / Make: Siemens main spindle drive type: 1PH7 Maximum drive power: 41 kW Maximum torque: 1,055 Nm Speed control / Gearbox: 3-stage (oil-cooled) with automatic switching Spindle speeds 6,000 rpm: Low range: 0-918 rpm Medium range: 919-2,404 rpm High range: 2,405-6,000 rpm Axis drives / axis feeds: Axis drive motors: SIEMENS (digital) Drives) Maximum rapid traverse: (X/Y/Z axis) 25,000 mm/min Maximum working feed: (X/Y/Z axis) 15,000 mm/min Maximum feed force: (X-axis) 35,000 N (Y/Z axis) 35,000 N Drive systems: X-axis (longitudinal) pinion/rack (Atlanta brand) Y-axis (vertical) ball screw (preloaded) Ø 63x20 Z-axis (transverse) ball screw (preloaded) Ø 50x20 Machine weight: Weight FBF-M 8000 kg 41,000 without clamping table/plate array Connected load: KVA approx. 60 Paint finish: sky blue RAL 5015 / light gray RAL 7035 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A HEIDENHAIN iTNC 530 HSCI Automatic MTE Diagonal milling head Automatic tool changer Dksb Hdnev R Hqrj Iisl Cooling lubricant system with 20 bar & (internal coolant supply) Frequency control for coolant pump Air cooling through the spindle Operator platform with height adjustment of 2,300 mm and transverse travel of 800 mm Heidenhain HR 550 FS wireless handwheel Special operating mode (operating mode 4) RepairFIT+ – what does that mean? With RepairFIT+, we offer you a profitable and safe entry into our product lines. Our machines undergo a rigorous selection process, undergo a comprehensive deep-dive check, and are thoroughly cleaned by our experts. All identified defects, both technical and visual, are professionally repaired so that the machine is presented in perfect condition.