Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, worktable length: 6,400 mm, worktable width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Dsbvmq Uswhk E Hoajkl Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: used, Year of construction: 2006, x-travel 760 mm y-travel 560 mm z-travel 560 mm control 840 D Powerline Siemens tool taper SK 40 Dkobvmqewfhq Us Uael numbers of tools in magazin 60 spindle turning speed - stepless 0- 12000 U/min size of pallet 630 x 500 mm total connected load 64,2 KVA feed stepless 20- 15.000 mm/min rapid traverse 50 m/min total power requirement 26 kW weight of the machine ca. 12 t dimensions of the machine ca. 5,2 x 4,5 x 2,45 m 5 axes machining center with rotating table (C) and swiveling head (B). Machine has a pallet changing system with 2 pallets and an ATC with 60 positions. Machine has worked 20.000 spindle hours and was always well maintained.

Condition: new, Year of construction: 2025, Functionality: fully functional, Buy your Fiber Laser delivery time 6/8 weeks buy or financial lease via Danmar Machines BV FIBER LASER METAL CUTTING MACHINES Quality, advanced CNC Laser cutting machines for sheet material and tube lengths. Quickly and accurately cut materials in the right shape with a CNC Fiber Laser. Danmar Machines Fiber Laser machines are produced in Asia. Fast production lead time so fast delivery. Buy CNC Fiber Laser € 34,500,--* Working area: 1,500x3,000 mm* ( 4,000x2,000 - 6,000x2,000 ) Laser strength: 1,500* - 3,000 - 4,000 - 6,000W Metal cutting machines for comparison Dkjbswgxq Usvmq Uajl Carbon steel (Carbon steel) 1-30mm Stainless steel (RVS) 1-22mm Aluminum 1-16mm Brass 1-16mm Copper 1-8mm Contact us for more information, prices and delivery time.

Condition: used, knife sets for a press brake total 3 sets of upper knives (total 12 knives of 835mm long) 2 sets of lower knives. (total 8 dies of 835mm long) 1 x divisible upper beam 1 x bending block set Djbvmq Uowgppzeaskl the mentioned price of €3500 is for the entire lot together. for the dimensions of the mounting for the upper knife see image

Condition: used, cutting diameter 250 mm saw band length 3660 x 27 x 0,9 mm cutting width 400 mm engine 1,0 KW motor speeds: 1400 U/min cutting speed 20 - 70 m/min Dsbvsv Nq Tnemq Uaekl weight of the machine ca. 0,5 t dimensions of the machine ca. 1,55 x 1,0 x 1,2 m

Condition: as good as new (ex-display), Year of construction: 2013, As good as new drilling center from CMA Type BRD32CN6000 Capacity 6000 x 32 mm Table length 6000 mm Including tool changer Dobvmq Ujwcghtjaskl Including 4 pneumatic clamps, various tool holders and height sensor Machine has hardly been used and is in new condition

Condition: excellent (used), Year of construction: 2015, Hydraulic press brake LVD PPS-TS 200/30 Year of construction 2015 Serial number 35933 Technical specifications Force 2000kN Working length 3000mm Distance between uprights 2550mm Stroke 200mm Distance table – ram 500mm Gap 300mm Table width 180mm Approach speed 100mm/s Working speed 9mm/s Return speed 90mm/s weight 11.000kg motor 18kW oil 350 COMMAND CONTROL TS • Touch – 15” screen numeric controller • Back gauge X-R • Toptool clamping PPS toolholders LVD 10 – 15 pcs • 2 front supports • Security; CE PPS3520 - LASERSAFE • TABLE DE BOMBAGE MANUEL TOOLING INCLUDED IN MACHINE PRICE: Debvmqswcqzqo Uaokl F10 H180 78° 5x508mm + 1x550mm sections V16 H90 78° 6x508mm

Condition: used, Year of construction: 2013, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Control S 840 DSL x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min main drive 37(48) kW feed in x - axis 0- 45 m/min feed range Z-direction 0- 30 m/min work piece power 19 kW toolpiece turning speed range 0- 6000 U/min total power requirement 60 kW weight of the machine ca. 12 t Dsbvmqewfhq Is Uaokl dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck and tool holders.

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, CNC milling machine Portal milling machine type Nesting Dkjbvsv T Akyomq Uaol working area X-axis 2,600mm working area Y-axis 1,300mm working area Z-axis 200mm drive Servo Vacuum table Vacuum pump 100M3/H AdTech CNC Controller UcanCam CadCam Software V11 Standard Endless possibilities: milling, relief, photos, Fusion, contours, smoothing oak leaves, milling DXF- DWG- Logos, ...,.. and much more in materials: mdf, melamine, carbon, Trespa, dibon, Alucarbon, PP, PPE, wood,

Condition: used, Year of construction: 1992, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, X-axis (longitudinal) 1000 mm Y-axis (transverse) 400 mm Z-axis (vertical) 450 mm Table length 1400 mm Table width 400 mm Max. table load capacity 800 kg Dkobvmqswgpn Rj Uasl spindle mount ISO 50 mitutoyo digital readout spindle speed: 35.5 - 1800 rpm total machine power: 11 kW hydraulic tool clamping. year of construction 1992 weight approx. 4500kg

Condition: new, bore capacity in steel (diameter) 45 mm quill stroke 125 mm 560 mm 230 mm table surface area 800 x 240 mm spindle turning speed range 75 - 3200 U/min max. milling cutter diameter 80 mm spindle taper ISO 30 max. distance between table and spindle-nose 460 mm throat 230 mm connected load frequency 400 V total power requirement 1,5 kW weight of the machine ca. 580 Kg dimensions of the machine ca. 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. Djbvoupxrnsmq Uaekl coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box.

Condition: used, Year of construction: 2002, weight max. 10 / 20 (einzeln / Satz) t workpiece diameter Ø250 - Ø4600 mm gear diameter 380 mm turning speed drive gear steples 130 x 1300 mm/min total power requirement 2x 0,75 kW weight of the machine ca. 750 kg / 500 kg Steel rollers, dia. 380 mm Idle rollers with motor driven displacement of rollers Continously variable speed of drive rolls Dkjbvmqowg Hpre Uaol

Condition: reconditioned (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, spindle speed (max.): 3,000 rpm, table width: 1,200 mm, tool mount: 50 mm, power: 0.028 kW (0.04 HP), SORALUCE TR-25 included installation and commissioning Year of manufacturing: 2002 Capacities / travel: Axis (X): mm 2.500 Vertical (Y): mm 1.600 Ram (Z): mm 1.200 Table size: Length: mm 2.860 Width: mm 1.200 Painting: RAL 5005 and RAL 7035 Tool taper: ISO 50, DIN 69871 Form AD Main Spindle Drive: Power: 100 % ED KW28 Spindle speed range: Spindle speed: rpm-1 20-3.000 Feeds: X-, Y- und Z-Axis mm/min 2 – 12.000 Max. rapid traverse speed: X-, Y- und Z-Axis mm/min 15.000 Weight: kg 22.200 Heidenhain 426 Heidenhain CNC control 426M with digital drive technology, electronic handwheel HR410 Automatic Milling Head, Diagonal H26 Automatically indexing Soraluce "Diagonal" milling head, type H26 including a long spindle for internal coolant supply. 2.5° division in both joints and speeds up to 3000 rpm. Clamping via Hirth serration in both joints. Repeatability of +/-3 sec. or 0.002mm. FAG spindle bearing with steel balls. Includes air lock. Chip Conveyor Automatic Tool changer: Maximum Tool Diameter: 125 mm Max. Tool Diameter with Adjacent Slots Free: 250 mm Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Number of Magazine Slots: 40 Dsbvmq Uorp H D Tjaokl Coolant lubrication system internally cooling 3D thermal expansion compensation Splash guard Our product line: RepairFIT RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line have been procured by us following a strict selection process and have undergone a thorough examination (Deep-Dive-Check). After intensive cleaning, any detected and obvious defects or errors have been professionally repaired by our expert service team. What does this mean for you? A RepairFIT offer is ideal for you if you're looking for a used machine while also wanting guaranteed process safety. With this option, you receive a high-quality CNC milling machine that is immediately ready for error-free operation. With our professional service technicians, we implement the commissioning in your premises in the shortest possible time. You can start production right away. This is a clear difference from an ordinary used machine purchase. This solution offers you guaranteed process and planning reliability at an attractive fixed price Project Execution: Benefit from our turnkey project execution, which is included in all lines: Our team of experts provides comprehensive support in optimally determining the machine's location, creating a professional layout, and fully integrating it into your manufacturing process. We ensure that your CNC milling machine is expertly installed, commissioned, and precisely aligned according to the manufacturer's specifications! All from a single source, in the end, simply a process-reliable machine that does what it's supposed to do.

Condition: used, Year of construction: 2012, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Control S 840 DSL x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min main drive 37(48) kW feed in x - axis 0- 45 m/min feed range Z-direction 0- 30 m/min work piece power 19 kW toolpiece turning speed range 0- 6000 U/min total power requirement 60 kW weight of the machine ca. 12 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck and tool holders. Dobvmq Uswfhqzoaekl

Condition: excellent (used), Year of construction: 1989, Functionality: fully functional, Weiler Commodor 3-axis lathe with feed and spindle drive and digital readout from K&C, NEW, excellent condition! Technical specifications: >> Year of manufacture 1989 Machine no. 89-2633 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 45 to 2000 rpm >> Spindle bore 56 mm >> Short-taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MT 4 >> Feed rates from 0.026 to 0.888 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 2000 kg >> Spindle brake can be switched on >> Drive power 7.5 kW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3 New K&C 3-axis digital readout, 12-month manufacturer's warranty with instruction manual. Debvmqowhd E Hs Uaekl Functions: mm/inch switching, ABS/INC coordinate selection, display value halving, reference mark, 200-piece tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal, >> New 200mm three-jaw chuck with 2 sets of jaws >> Multifix size B with 2 tool holders >> Electronic spindle protection >> Coolant system >> Multi-stop About the machine: Offered is a Weiler Commodor center lathe in very good condition. The machine is fully functional. The spindles run smoothly with little crank play. The machine has been completely disassembled and repainted. A very robust and powerful machine. The new 3-axis digital readout from K&C makes working even easier and more precise. The machine has undergone electrical and mechanical testing at our facility. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and test this machine live on-site.

Condition: ready for operation (used), Hydraulic press brake LVD PPEB-EFL 220/30 CADMAN CNC Year of construction 2004 Serial number 28652 Technical specifications Force 2200kN Working length 3050mm Distance between uprights 2600mm Stroke 450mm Distance table – ram 685mm Gap 405mm Approach speed 100mm/s Working speed 9.5mm/s Return speed 110mm/s Dksbswcqpbovmq Uajl weight 16500 kg motor 22kW oil 350L Dimensions according drawing attached CADMAN CNC 2D graphic controller •Easy form laser EFL 130mm – W axe • Table PP8170 V-axe – table width 120mm • Wila hydraulic top tool clamping • LVD bottom tool clamping hydraulic • Back gauge DUO X X’ R Z1 Z2 (X 600mm) • Security; CE PP3580 – lasersafe PP5320

Condition: used, Functionality: fully functional, Hydraulic used sawing machine Engine power --- 1.1 kW Saw band size --- 2700 x 27 x 0.9 mm Cutting speed --- 27 - 53 m/min Saw arm adjustment --- 0° ~ 60° Cutting capacity -45° Ø 220 mm ■ 180 x 220 mm Cutting capacity 0° Ø 250 mm ■ 280 x 220 mm Cutting capacity 45° Ø 210 mm ■ 180 x 220 mm Cutting capacity 60° Ø 130 mm ■ 110 x 200 mm Dksbvswgyi Ejmq Uaol Weight --- 350 kg Including 3 new bimetal saw bands 2700 x 27 x 0.9 mm 5/8

Condition: excellent (used), Year of construction: 2006, max wheel Diameter: 275 mm gear width: 58 mm max mod.: 8 min mod.: 0.5 machine weight: 10t max nr. of teeth: 200 min nr. of teeth: 5 Dobveinblwjmq Uajkl

Condition: reconditioned (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, table width: 1,000 mm, table load: 5,000 kg, table length: 3,000 mm, overall weight: 16,500 kg, year of last overhaul: 2024, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2005 Capacities / Travel: Longitudinal (X): 3,000 mm Vertical (Z): 1,000 mm Transverse (Y): 1,000 mm Table size: Length: 3,200 mm Width: 1,000 mm Number of T-slots on the table surface: 7 T-slot width: 22H12 mm Max. table load: 5 t/m² Paint finish: RAL 5010 and RAL 9002 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle KW30 Spindle speed range: Spindle speed: min-1 20-3,000 Speed control: via gear box Feed rates: X, Y, and Z axes mm/min 4,000 Max. Rapid traverse speed: X, Y, and Z axes mm/min 10,000 Weight: approx. 16,500 kg BASIC MACHINE EQUIPMENT: HEIDENHAIN iTNC 530 HSCI Manual diagonal head Chip conveyor Cooling lubricant system with 20 bar & (IKZ) RepairFIT is our proven offering for a profitable entry into our product lines. Dkobouq Epievmq Uaol The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified were professionally repaired by our expert service team.

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication Dkjbsv Rw Uujvmq Uael - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: reconditioned (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, spindle speed (max.): 6,000 rpm, coolant supply: 20 bar, RepaitFIT+ by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2015 Capacities / Travel: Longitudinal (X): 8,000 mm Vertical (Y): 3,000 mm Transverse (Z): 1,500 mm Main spindle drive: Motor / Make: Siemens main spindle drive type: 1PH7 Maximum drive power: 41 kW Maximum torque: 1,055 Nm Speed control / Gearbox: 3-stage (oil-cooled) with automatic switching Spindle speeds 6,000 rpm: Low range: 0-918 rpm Medium range: 919-2,404 rpm High range: 2,405-6,000 rpm Axis drives / axis feeds: Axis drive motors: SIEMENS (digital) Drives) Maximum rapid traverse: (X/Y/Z axis) 25,000 mm/min Maximum working feed: (X/Y/Z axis) 15,000 mm/min Maximum feed force: (X-axis) 35,000 N (Y/Z axis) 35,000 N Drive systems: X-axis (longitudinal) pinion/rack (Atlanta brand) Y-axis (vertical) ball screw (preloaded) Ø 63x20 Z-axis (transverse) ball screw (preloaded) Ø 50x20 Machine weight: Weight FBF-M 8000 kg 41,000 without clamping table/plate array Connected load: KVA approx. 60 Paint finish: sky blue RAL 5015 / light gray RAL 7035 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A HEIDENHAIN iTNC 530 HSCI Automatic MTE Diagonal milling head Automatic tool changer Cooling lubricant system with 20 bar & (internal coolant supply) Djbjv R Hqrsvmq Uaskl Frequency control for coolant pump Air cooling through the spindle Operator platform with height adjustment of 2,300 mm and transverse travel of 800 mm Heidenhain HR 550 FS wireless handwheel Special operating mode (operating mode 4) RepairFIT+ – what does that mean? With RepairFIT+, we offer you a profitable and safe entry into our product lines. Our machines undergo a rigorous selection process, undergo a comprehensive deep-dive check, and are thoroughly cleaned by our experts. All identified defects, both technical and visual, are professionally repaired so that the machine is presented in perfect condition.

Condition: reconditioned (used), Year of construction: 2007, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, table width: 1,500 mm, table length: 3,750 mm, 100% Retrofit by Dornhöfer The Difference. Including installation and commissioning! Year of manufacture: 2007 Control: Heidenhain TNC 640 Travel: X-axis (mm) 3,500 Y-axis (mm) 1,400 Z-axis (mm) 1,000 Spindle speed range: 20–3,000 rpm Milling head: Automatic milling head, diagonal H26 2.5° x 2.5° Tool holder: ISO 50, DIN 69872 AD Main spindle drive power: 28 kW Maximum spindle speed: 3,000 -Chip conveyor -Cooling lubricant system -3D thermal expansion compensation Djbvmqjv R Hxpe Uajkl -Automatic tool changer with 60 magazine positions -Movable control panel -Complete splash guard (fully enclosed) -NC rotary table 1,000 mm x 1000mm 100% RetroFIT – our core business! For us, it means offering a machine that can only be compared to a new product, but also offers you many other advantages: Latest CNC control technology with proven machine stability Significant CO₂ savings compared to a new machine Shorter delivery times Often savings on expensive foundation costs Significantly lower investment costs All mechanical components (e.g., ball screws, guides, roller bearings, etc.) have been renewed. Our designers designed the entire electrical peripherals (such as the most modern drive, control, and regulation technology) using the most efficient technologies. This was implemented using new cabling and a completely new control cabinet, as well as the latest Heidenhain control system with a wide range of innovative options. The completely new and innovative hydraulic concept meets the most modern requirements and achieves maximum efficiency. The machine's visual appearance is in no way inferior to that of a new machine thanks to its refurbishment: The entire machine was first disassembled down to every screw, sanded, primed, and then painted with a robust 2K EP paint. We have equipped the machine with a safety concept that is individually tailored to the needs of the operator. We offer the highest level of safety, flexibility, and ergonomics. You get a state-of-the-art machine combined with significant CO₂ savings.

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table load: 5,000 kg, table length: 2,700 mm, overall weight: 15,500 kg, year of last overhaul: 2024, RefurbishmentPLUS by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2007 Capacities / Travel: Longitudinal (X): 2,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,200 mm Table size: Length: 2,700 mm Width: 850 mm Number of T-slots on the table surface: 6 T-slot width: 22H12 mm Reference slot: 22H8 mm Distance between slots: 140 mm Max. table load: 5 t/m² Paint finish: RAL 5011 (steel blue) and RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 form A Main drive: Drive power: 100% duty cycle KW24 Spindle speed range: Spindle speed: 20-4,000 rpm Torque: 479 Nm Feed rates: X, Y, and Z axes mm/min 10-10,000 Max. rapid traverse speed: X, Y, and Z axes mm/min 25,000 Weight: approx. 15,500 kg BASIC MACHINE EQUIPMENT: Heidenhain iTNC 530 HSCI Automatic milling head, diagonal H200 Chip conveyor Coolant system STANDARD EQUIPMENT: - Portable electronic handwheel HR 510 with 3m spiral cable - Hydraulic counterbalance acting directly on the vertical slide - 3D thermal expansion compensation for Heidenhain CNC contouring controls - Complete splash guard enclosure consisting of two front doors and one rear door for operating the machine from the front and rear. All doors are equipped with viewing windows. - Heidenhain AC drive motors in all axes with diagonal drive technology - INA RUE 45 linear guideway system in all axes with central lubrication - Ball screws (IT5) in all axes Dsbjun Nnqjvmq Uaekl - Heidenhain direct linear measuring system in all axes - Telescopic covers for the X-axis guideways - Automatic cyclic lubrication for all axes and motion components - Work area lighting Refurbishment+ – what does that mean? The RefurbishmentPLUS line offers you a machine that has been uncompromisingly restored to its original technical and visual condition. All assemblies have been completely disassembled, repainted, and rebuilt with new, original spare parts. Cables, hydraulics, guides, spindles, rolling bearings – everything new!

Condition: reconditioned (used), Year of construction: 2002, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 15,000 m/min, rapid traverse Y-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, 100% Retrofit by Dornhöfer The Difference. Including installation and commissioning! Year of manufacture: 2002 Control: Heidenhain TNC 640 / TNC 7 Travel: X-axis (mm) 16,000* (see below) Y-axis (mm) 3,200 Z-axis (mm) 1,500 Spindle speed range: 20–4,000 rpm Feed rates: X, Y & Z axes (mm/min): 2–12,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 15,000 Milling head: Automatic milling head, orthogonal H10, 1° pitch Tool holder: ISO 50, DIN 69871 AD Main spindle drive power: 100% duty cycle KW37 - Automatic tool changer with 60 magazine positions - Coolant system with 20 bar & (IKZ) - Chip conveyor, floor ejection - Ergonomic operator platform - Hazardous area protection - 3D thermal expansion compensation - INA linear guides *Adaptive X-axis length: We supply the machine bed in the length you require, up to a maximum of 16,000 mm. Dsbvjv S Upfemq Uaskl 100% RetroFIT – our core business! For us, it means offering a machine that can only be compared to a new product, but also offers you many other advantages: Latest CNC control technology with proven machine stability Significant CO₂ savings compared to a new machine Shorter delivery times Often savings on complex foundation costs Significantly lower investment costs All mechanical components (e.g., ball screws, guides, rolling bearings, etc.) have been renewed. Our designers designed the entire electrical peripherals (such as the most modern drive, control, and regulation technology) using the most efficient technologies. This was implemented using new cabling and a completely new control cabinet, as well as the latest Heidenhain control system with a wide range of innovative options. The completely new and innovative hydraulic concept meets the most modern requirements and achieves maximum efficiency. The machine's visual appearance is in no way inferior to a new machine thanks to its refurbishment: The entire machine was first disassembled down to every screw, sanded, primed, and then painted with a robust 2K EP paint. We equipped the machine with a safety concept that is individually tailored to the needs of the operator. We offer the highest level of safety, flexibility, and ergonomics. You receive a state-of-the-art machine combined with significant CO₂ savings.

Condition: reconditioned (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, RepaitFIT+ by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2015 Capacities / Travel: Longitudinal (X): 10,000 mm Vertical (Y): 3,000 mm Transverse (Z): 1,500 mm Paint finish: Graphite gray RAL 7024 / Agate gray RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Taper: DIN 69871 Main drive: Motor / Make: Siemens Main spindle drive Tap: 1PH7 Maximum drive power: From 198 rpm 100% duty cycle KW41 Maximum torque: Constant up to 198 rpm 100% duty cycle 1920 Nm Speed control / Gearbox: 3-stage (oil-cooled) With automatic Switching Spindle speeds 4000 rpm: low range rpm 0 - 516 medium range rpm 460 - 1,288 high range rpm 1,200 - 4,000 Axis drives/axis feeds: Dkebvmjv R Hwrsq Uael Axis drive motors: Maximum rapid traverse: (X/Y/Z axis) 25,000 mm/min Maximum working feed: (X/Y/Z axis) 15,000 mm/min Maximum feed force: (X-axis) 35,000 N (Y/Z axis) 32,000 N Axis drive systems: X-axis (longitudinal) pinion/rack (Atlanta brand) Y-axis (vertical) ball screw (preloaded) Ø 63 x 20 Z-axis (transverse) Ball screw (preloaded) Ø 50 x 20 Weight: (without clamping table/plate area) approx. 49,500 kg Connection cable: approx. 60 kVA Innotrol HBG wireless handwheel Automatic tool changer with 60 magazine positions BIG Plus tool spindle Operator platform with height adjustment of 1800 mm and transverse adjustment of 800 mm Interface for adapter milling heads RepairFIT+ – what does it mean? With RepairFIT+, we offer you a profitable and safe entry into our product lines. Our machines undergo a rigorous selection process, undergo a comprehensive deep-dive inspection, and are thoroughly cleaned by our experts. All identified defects, both technical and cosmetic, are professionally repaired so that the machine is presented in perfect condition.