Condition: used, cutting diameter 250 mm cutting speed 10 - 70 m/min band speed 10 - 70 m/min 400 mm saw band length 3660 x 27 x 0,9 mm total power requirement 3,5 kW Dsb E Ihswg Sfref Tjut weight of the machine ca. 0,95 t dimensions of the machine ca. 2,0 x 1,7 x 1,7 m inkl. Dokumenmtation

Condition: good (used), Year of construction: 1988, 6-spindle-automatic lathe brand: TORNOS type: SAS16 new in: 1988 equipped with: sub spindel Dsb E Ievwmb Djhf Tsut threading attachement flushing system chip conveyor automatic baroader IEMCA PRA 40/31/P

Condition: good (used), Year of construction: 2010, Functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 350 mm, Emmegi Twin Inox steel/stainless steel double miter saw with 3 CNC-controlled axes Cutting length 6000 mm - longer in automatic mode also possible with automatic saw repositioning up to 10000 mm Dsb Eswii Iis Ihf Tout Redesigned double miter saw with saw blades D = 350 mm The machine can be motor-driven tilted from 135 to 45 degrees and features a pulsed spray system and continuous cooling (oil/water emulsion). Software options for short cuts, overlength cuts, cross cuts, and cyclic cuts are also available on this machine. Data transfer possible (Orgadate, Schücal, etc.) Accessories: Speed adjustment with potentiometer and 2 levels (brushless motors) - Delivery/commissioning/training and connection to software or calculation programs by us ("all-round worry-free" complete package) available for an additional charge

Condition: excellent (used), Year of construction: 2007, Model: AD-S2060 Serial Number: 7301072843 Technical Specifications: Press Capacity: 60T Bending Length: 2050mm Distance Between Columns: 1700mm Rapid Traverse: 200mm/sec Bending Speed: 10mm/sec Retraction Speed: 120mm/sec Stroke: 265mm Thrust: 415mm Oil Tank Capacity: 100L Length: 4375mm // Width: 2650mm // Height: 2745mm Weight: 6000kg Electrical Information: Duob E Ihfswifnls Tjt Supply Voltage: 3x400V Panel Supply Current: 25A Motor Supply Current: 15.5A Supply Cable Diameter: 4 x 2.5mm Insulation Resistance: 1 M OHM Test voltage: 1000V Control voltage: 24V Frequency: 50Hz Control: ModEva 10 Tools available, please inquire in advance! Test reports available, last tested in April 2024 - passed.

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Fintec 128 Tube finishing machine for sale Djbewbh Dye E Ihf Tsut Can be viewed under power with your steel tubes

Condition: good (used), Year of construction: 2017, Functionality: fully functional, Turning diameter above bed ----- 210 mm Turning diameter above cross support ----- 110 mm Center height ----- 105 mm Center distance ----- 400 mm Bed width ----- 100 mm Cross support travel ----- 75 mm Chisel support travel ----- 55 mm Main spindle throughput ----- 21 mm Main spindle mounting ----- MK3 Spindle speed range ----- variable 50 - 2500 rpm Thread cutting inch ----- 8 - 44 TPI Thread cutting metric ----- 0.5 - 3 mm Spindle travel ----- 60 mm Spindle diameter ----- 30 mm Spindle mounting ----- MK2 Motor power ----- 600 Watt Weight ----- 75 kg Dob E Ihswgxq Ijf Tsut STANDARD ACCESSORIES * 3-jaw chuck 100 mm - self-centering * 4-way tool holder * Drip plate * Rear wall * Claw plate guard * Lead spindle guard * Tool support guard * Set of change gears * Digital speed display * Fixed centers * Left / Right switching * Tools in box * MOUNTED BASE CUPBOARD

Condition: new, Year of construction: 2009, 30 mm 30 mm L-beam 20 x 20 x 4 mm Dujbsv Skzde E Ihf Tot flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min total power requirement 0,2 kW weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: used, Max. cutting length: 2040 mm Max. sheet thickness: 4 mm steel Controlled back stop up to 1000 mm Side stops and table extensions Deb E Iowfqrzehf Tjut cutting length limitation Cutting edge lighting knife sharpened Weight approx. 3000 kg

Condition: new, Year of construction: 2025, Functionality: fully functional, input voltage: 400 V, overall weight: 200 kg, total width: 800 mm, total length: 1,000 mm, total height: 2,200 mm, volume flow: 2,600 m³/h, noise level: 79 dB, warranty duration: 12 months, power: 3 kW (4.08 HP), Extractor for double miter saws or saws used in aluminum processing Very powerful and quiet extraction system with noise levels below 80 dB! Duob E Ihfjwii Hxj Tjt 2600 m³ per hour suction capacity 3 kW motor Extractor includes a 14-meter hose with two outlets

Condition: excellent (used), Year of construction: 2017, Young used IMET circular saw with push-up system from PEHU Type Sirio 370 SH-E Push-up system PEHU Autopos 600L Equipped with microdosing lubrication system Capacity ø 120 mm / rectangle 180x100mm / square 100x100mm Deb E Iowccupohf Teut Cutting speed 15 / 30 Miter 0-60 degrees left / 0-45 degrees right Saw blade 370 mm Saw machine was put into use in 2019, push-up system is from BJ 2019

Condition: excellent (used), Functionality: fully functional, Used Fintec 130 Sheet Metal Corner Linishing Sanding / Finishing Machine For sale With Spare Belts Ideal for sheet metal boxes Dujbswbhtne E Ihf Tjt

Condition: excellent (used), total height: 26,800 mm, back gauge: 1,000 mm, installation height: 550 mm, pressing force: 170 t, total width: 19,000 mm, total length: 42,000 mm, overall weight: 10,700 kg, operating speed: 10 mm/s, distance between stands: 2,700 mm, power: 0.015 kW (0.02 HP), Deratech Ultima press brake 170-3200 Very extensive tool package!!! Control ESA 660 W 2-D graphics fully Windows compatible 19 inch 4-axis backgauge X-R-Z1-Z2 instead of X-R Backgauge finger X3, CNC-controlled+/-150 mm Additional heavy support arm on linear guide with parking space Higher narrow table for WILA plug-in dies WILA hydraulic quick clamping incl. hydraulic unit CNC-controlled dynamic crowning incl. automatic compensation during the bending process compensation during the bending process Djb Ejp Hf Dzo Ihf Tjut

Condition: ready for operation (used), Year of construction: 2004, Available immediately from location: CNC table-type boring and milling machine TOS Varnsdorf Type WHMQ 13 CNC Year of manufacture 2004 Dsb E Ihfswh Rixj Tsut Heidelberg TNC 430 60-station tool changer Table 1800 x 2500 mm Table load 12.5 t SK 50 chuck Spindle speeds up to 3000 rpm Spindle diameter 130 mm Travel X/Y/Z/W 3500/2500/1250/800 mm Angle milling head Clamping angle Many tools Weight 34 t Price €98,000 plus VAT, ex-location, ex-foundation

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: L220M0165, turning length: 510 mm, turning diameter: 250 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 550 mm, Maintenance of the machine in 2024 for €10,000 TECHNICAL DETAILS Control: CNC Fanuc I Series Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Dob Ejwid Sis Ihf Tjut Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm Tool carrier Turret: 12-way Driven tools: All 12 stations MACHINE DETAILS Machine weight: 4 t Rated power: 23.68 kVA Part counter: 1,313,733 Control switch-on time: approx. 53,000 h EQUIPMENT - Tailstock - Bar loader LNS Turbo

Year of construction: 2007, Condition: excellent (used), Emmegi machining center with 3 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel. The machine features a 6-station tool changer. Both can accommodate an angle head and a side milling cutter for five-sided machining of the workpiece. It is also equipped with a movable work table that facilitates loading and unloading of the workpiece. This significantly increases the maximum machinable profile cross-section. The machine is sold with a saw blade and angle head. The machine has 2 stops (right and left). Dsbswiiyxs E Ihf Tsut The machine has a barcode scanner.

Condition: good (used), Year of construction: 1988, Functionality: fully functional, Press force: 2,500 kN Table: 1,580 x 1,200 mm (only 3 stages with 300 mm die cushion) Ram: 1,450 x 1,000 mm Ram adjustment: 150 mm Ram stroke: 250 mm Max. installation height: 600 mm (tool height should be 590 +/- 5 mm) Min. installation height: 450 mm Coil inlet height: 300 mm Transport height: 300 mm Table equipment: Die cushions: 3 individually adjustable, uncontrolled Die cushion force: 120 kN at 12.0 bar Die cushion travel: 120 mm Ram equipment: 3 individually adjustable, uncontrolled Ejector force: 80 kN at 16.0 bar Ejector travel: 120 mm mm Upstream coiling system Max. coil width: 500 mm (450 mm) Max. coil thickness: 3.5 mm Material cross-section: 1200 mm² for the straightening system Dsb Eowg Scks Ihf Tsut Max. coil weight: 6000 kg Gripper system: 3 (5) between the stages

Condition: excellent (used), Functionality: fully functional, 1 Used Haeger 412 Insertion Machine Sheet Metal Inserts Stud & Nut Self Clinching For Sale With tooling and J shape lower tool Djb E Ihfowbhips Tout

Condition: excellent (used), Year of construction: 1975, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1975 With coolant system! Deb Ejwg Hd No Ihf Teut

Condition: ready for operation (used), Year of construction: 2000, Available immediately from location: CNC machining center Mikron Type VCP 710 Year of manufacture 2000 Heidenhain TNC 426 Table 1080 x 580 mm Travel X/Y/Z 710/500/500 mm SK 40 30-station tool changer Internal coolant supply 40 bar Speeds up to 10,000 rpm Dujb Eowh Rb Ij Ihf Tjt Drive 20 kW Weight 8 tons Price ex location: €6,750 plus VAT

Condition: excellent (used), operating hours: 751 h, Functionality: fully functional, machine/vehicle number: 1E1-1036, Very few operating hours: 751 hours Complete documentation (assembly, operating, and maintenance instructions) -Diameter range (inner Ø): 1.5 - 165 (manual stroke) 1.5 - 95 (automatic stroke) -Stroke length: 6 to 170 mm -Spindle speed: 200 to 3000 rpm (variable) Dujb E Ihswh Iq Tef Tot -Spindle motor: 1.5 kW (3.0 HP) -Lift motor: 0.75 kW (1.0 HP) -Year of manufacture: Approx. 2005 -Machine weight: 725 kg -Space requirement: approx. 3.5 m²

Year of construction: 2012, Condition: excellent (used), Functionality: fully functional, Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Ideal for machining steel and stainless steel profiles Travel path X-axis 4300 mm Y-axis 270 mm Z-axis up to 300 mm The profile turning device positions at -90°, 0°, and 90°, as well as all degrees in between, with a precision of tenths. This eliminates the need for angle heads for lateral machining and fully utilizes the performance range of the spindle motor. 4 clamping elements that are software-checked for collisions and automatically positioned by the machine. Tool changer for 8 tools (up to 2 180mm saw blades can be used in the changer thanks to 2 special tool holders). HSK-63F tool holder. Djb E Ihewiixuef Tjut Minimum-quantity spray device for 2 different fluids. USB ports. RJ45 network card for network connection. 3D software. Camplus software. Shape software for free programming and lettering. Handheld control unit with display including speed control. Pneumatic reference stop on the left and right sides for multiple assignments. Tunnel on the left and right sides for extra-long profiles. - Delivery/commissioning/training and connection to software or calculation programs by us. ("all-round worry-free" complete package) available for an additional charge.

Condition: excellent (used), Year of construction: 1976, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Djb E Ihfjwg Hdvo Tout Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1976 With coolant system!

Condition: excellent (used), Year of construction: 2006, operating hours: 2,148 h, Functionality: fully functional, machine/vehicle number: 1E1-1258, Very few operating hours: 2148 hours Complete documentation (assembly, operating, and maintenance instructions) -Diameter range (inner Ø): 1.5 - 165 (manual stroke) 1.5 - 95 (automatic stroke) -Stroke length: 6 to 170 mm -Spindle speed: 200 to 3000 rpm (variable) -Spindle motor: Duob E Ihfjwh Imus Tst 1.5 kW (3.0 HP) -Lift motor: 0.75 kW (1.0 HP) -Machine weight: 725 kg -Space requirement: approx. 3.5 m²

Year of construction: 2009, operating hours: 200 h, Condition: like new (used), Functionality: fully functional, !!! Machining center in mint condition with only 200 hours!!! Machining center with 4 CNC-controlled axes for machining profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. Ideal for machining steel and stainless steel profiles. Travel path: X-axis 4300 mm Y-axis 270 mm Z-axis up to 300 mm The profile turning device positions at -90°, 0°, and 90°, as well as all degrees in between, with a precision of one-tenth. This eliminates the need for angle heads for lateral machining, and the spindle motor's performance range is fully utilized. 4 clamping elements that are software-checked for collisions and automatically positioned by the machine. Tool changer for 8 tools (up to 2 180mm saw blades can be used in the changer thanks to 2 special tool holders). HSK-63F tool holder. Minimum-quantity spray device for 2 different fluids. Dsb Eewiiq Ro Ihf Teut USB ports. RJ45 network card for network connection. 3D software. Camplus software. Shape software for free programming and lettering. Handheld control unit with display including speed control. Pneumatic reference stop on the left and right sides for multiple assignments. Tunnel on the right for extra-long profiles. - Delivery/commissioning/training and connection to software or calculation programs by us. ("all-round worry-free" complete package) available for an additional charge.

Year of construction: 2013, Condition: excellent (used), Emmegi Twin Inox steel/stainless steel double miter saw with 3 CNC-controlled axes Cutting length 6000 mm - longer in automatic mode also possible with automatic saw repositioning up to 10000 mm Redesigned double miter saw with saw blades D = 350 mm The machine can be motor-tilted from 135 to 45 degrees and features a pulsed spray system and continuous cooling. Dsb E Ijwiiiyshf Tout Software options for short cuts, overlength cuts, cross cuts, and cyclic cuts are also available on this machine. Data transfer possible (Orgadate, Schücal, etc.) Accessories: Speed adjustment with potentiometer and 2 levels (brushless motors) - Delivery/commissioning/training and connection to software or calculation programs by us ("all-round worry-free" complete package) available for an additional charge