Condition: good (used), gear, gears, gear shaft, pinion shaft -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 42 mm / 14 teeth -Tooth width: 83 mm -Dimensions: see photo technical drawing -Number: 9x gear shaft available -Price: per piece Duob Hewcxtzec Hlzjt -Total dimensions: Ø 42 x 220 mm -Weight: 0.9 kg/piece

Condition: refurbished (used), Year of construction: 1988, Graver grinding machine Make: Maschinenfabrik Baden-Baden Model: FSS Year of manufacture: 1985 - overhauled, repainted RAL7012 basalt gray, RAL 7035 light gray Machine no.: 2992 Dsbotqdqge Hc Hlzjut Warranty: 12 months single layer from delivery, on the mechanics overhauled by us. The electrics and electronics are excluded, as they have only undergone a functional test. For machines located outside our northern Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Grinding wheel with flange - Operating instructions incl. new electrics On/off switch in new housing with undervoltage coil to realize the restart protection z. e.g. in the event of a power failure or if the mains plug is pulled out Used as seen The machine corresponds technically the state of the year of manufacture at that time.

Condition: excellent (used), Year of construction: 2006, Control: Fanuc 16i-TB Swing diameter over bed: 190 mm Turning diameter: max. 190 mm Turning length: max. 640 mm Bar capacity left: 51 / 65 mm, right: 51 mm Spindle nose ASA: A2-5 / A2-6 Chuck diameter: max. 165 mm Max. speed (51/65): 5000/4500 rpm Travel X1/X2/X3 axis: 167.5 mm Travel Z1/Z2/Z3 axis: 250/250/685 mm Travel B axis (right spindle): 760 mm Rapid traverse X1/X2/X3 axis: 16 m/min Rapid traverse Z1/Z2/Z3 axis: 40 m/min Main spindle Spindle bore 51 mm Spindle nose A2-5" Drive power: FANUC AC 15 / 11 kW Spindle speed 50 – 5000 rpm C-axis main spindle Incl. spindle brake (disk brake) C-axis rapid traverse 600 rpm C-axis input resolution 0.001° Milling function for upper (L/R) and lower turrets 12 driven tools each, 1 of which is in use Drive power, AC 5.5 / 3.7 kW Speed 60 – 6000 rpm Dusb Hc Hlowhwl Hezjt Y-axis for upper turrets L/R Drive power, AC 1.2 kW Travel + 61 / - 41 mm Incl. NC option Helical (thread milling) NC back-end machining unit (Subspindle) Bar capacity 51 mm Spindle nose A2-5" Drive power FANUC AC 11 / 7.5 kW Spindle speed 50 – 5000 rpm. C-axis subspindle (B) Technical specifications similar to the C-axis main spindle Basic machine equipment: - Standard hollow clamping cylinder with drawbar - Coolant system, 180L tank capacity, Grundfos pumps 5 bar, check valves - Splash guard with safety locking of sliding doors - Hydraulic pressure switch - Automatic lubrication system - Work area lighting - Tool storage - 400/220 (200) VAC transformer - Machine color (Space Color III) RAL 7035 Light Gray / RAL 7024 Graphite Gray, door RAL 7015 Slate Gray - CE-compliant safety equipment - Spindle synchronization - Foot switch for chuck actuation - Chuck safety interlock - Bar loading magazine interface - 1 set of technical documentation Fanuc 16i-TB control system: - 10.4" LCD color screen - LUCK-BEI II – Programming Support - NT-Nurse 2 – Cutting pressure monitoring, tool counter, sister tools, etc. - NT-Work Navigator – Torque type - Part program memory, 320 m = 128 kB (of which 20 m is required for NT-Nurse 2) per turret - Registerable programs, a total of 200 per turret - Extended tool offsets, 99 pairs per turret - Spindle speed override switch, left + right - Display of runtime and number of workpieces - Direct thread cutting on the main spindle - Direct thread cutting on driven tools

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 370 mm Travel distanceY :270 mm Travel distance z: 250 mm max. workpiece size X: 570 mm max. workpiece size Y: 420 mm max. workpiece size Z: 240 mm max. workpiece weight: 500 kg table size X: 600 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: +/- 120mm submerged Dob Hc Hjwfgvpolzsut cooling unit Control unit: Sodick LQ33W Work tank internal dimensions: 850 × 610 mm U/V-axis travel: 120 × 120 mm Taper angle (workpiece thickness = 100 mm): ±25° Wire diameter: 0.15 – 0.3 mm Wire tension: 3 – 23 N Wire feed rate: max. 420 mm/s Distance floor to table surface: 995 mm Machine dimensions (W × D × H): 2125 × 2200 × 2220 mm Machine footprint: 3200 × 3200 mm Machine weight: 3800 kg

Condition: new, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for the movement of the rear roller - Digital display for bottom roller movement (material clamping) - Hardened rollers - Conical roller - Brake motor - Emergency stop Dsb Hc Hegg Nv Ielzsut - Documentation - 400V

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, turning length: 1,524 mm, turning diameter over cross slide: 760 mm, turning diameter: 760 mm, spindle motor power: 40,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 3,300 rpm, spindle bore: 112 mm, Mazak Intergrex 400-III x 1500 Mazatrol 640MT Pro Max. turning Ø: 760mm X-axis: 630mm Dusb Hc Hswf Nl Holzot Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Speed range: 35-3300Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW CAPTO C6 Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14000kg

Condition: good (used), Year of construction: 1971, Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine Dueb Hov D Dk Ajc Hlzet -Manufacturer: Staehely, high-performance gear hobbing machine type SH651 -Working area: Ø max. 650 mm -Working area: max. height 975 mm -Max. cutter diameter: 160 mm -Accessories: including extensive accessories see photos -Machine dimensions: 1600/2510/H2440 mm -Machine weight: 5300 kg -Dimensions accessories: Cabinet 355/890/H1415 mm pallet 1200/800/300 mm -Weight accessories: 820 kg

Year of construction: 2013, operating hours: 37,899 h, Condition: ready for operation (used), General Data Machine weight 14000 kg Dueb Hcjwbk Uhj Hlzet Control Unit Brand DELEM Main Drive Number of axis 9 This 9-axis TRUMPF TruBend 8130-30 press brake was manufactured in 2013. Ideal for precision bending applications, it features advanced control systems and robust construction. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 8130-30 machine we have for sale. Contact us for more information. Application Types Bending

Condition: good (used), Acera F3 Top quality milling machine. Dueb Hc Hsr Ixpdjlzot Motor and gearbox sound perfect. There are no accessories other than what you see in the pictures. Can be loaded into a Eurotrailer and transport organized throughout Europe.

Condition: new, Year of construction: 2025, Functionality: fully functional, load capacity: 3,000 kg, Column Lifting Rotating Device with 3-Ton Capacity Protec Syncrolift Rotating Device/Positioner Dusb Howih Dcsc Hlzet Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 3000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Clamping Plate Diameter 600 mm Rotation 0.75 kW Torque 5180 N-m 2 to 10-Ton Capacity Available Upon Request

Condition: new, - Ring bending machine Dsb Hogg N Amsc Hlzjut - Shaft diameter 60 mm - The two lower rollers are hydraulically driven - Three rollers are driven - 2 digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400 V

Condition: excellent (used), Functionality: fully functional, total height: 94 mm, total length: 220 mm, total width: 80 mm, We are selling 4 Spreitzer MZR 220-80 centering vises. These each include 2 base jaws with grip and center jaws. The base jaws are in very good condition, cleaned, and oiled. Accessories Clamping Jaws Center Jaws The compact MZR centering vise series is used as a cost-effective clamping device for raw parts on multi-axis machining centers and automation systems. It is used wherever maximum centering and repeat accuracy is not required. The clamping range can be increased using the one-piece reversible jaws with integrated grip steps. Dsb Hov R U Raoc Hlzeut Area of application: Single part and small-batch production Clamping from outside to inside (external clamping) Clamping from inside to outside (internal clamping) Material: Quenched and tempered tool steel

Condition: good (used), Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid, support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail Dueb Howcxmbjc Hlzot -Support rail: length 925 mm -Support width: 130 mm -Dimensions total: 935/265/H80 mm -Weight 17.8 kg

Condition: ready for operation (used), Year of construction: 2012, operating hours: 30,000 h, General Data Machine weight 24400 kg Control Unit Brand DELEM Main Drive Pressing force 3000 Bending length 4050 mm Number of axis 8 Additional Equipment Dujb Hcswbk Uno Hlzst CNC crowning 1 set of tools (curved upper tool and V-12 3.6 meter (515 mm pieces) lower tool) Bending AID WILA clamping Angle measuring system This 8-axis TRUMPF TruBend 8300-40 press brake was manufactured in 2012. Consider the opportunity to buy this TRUMPF TruBend 8300-40 press brake. Contact us for more information. Application Types Bending

Year of construction: 2023, Condition: used, machine/vehicle number: 0165780, +++Special Price+++ Robust, self-aligning container rotating device 1 used, well-maintained rotating device with a load capacity of 20 t, consisting of: Duebjwhc Uaj Hc Hlzjt 1 x drive unit 1 x idler unit 1 x handheld remote control with digital rotation speed display 1 x dual foot pedal for start/stop/rotate left/right Technical Specifications Type: ZT20 Total load: 20 t Load per unit: 15 t Roller diameter/width: 381 x 170 mm Roller material: Polyurethane Rotation speed: 100–1,000 mm/min, continuously adjustable via frequency converter Component diameter: 400–4,000 mm Electrical system: Freestanding control cabinet (can also be mounted on the machine upon request) Control system: Wired handheld remote control Connection voltage: 380/400 V, 3-phase, 50 Hz The system can also be rented. Upon purchase, the rental fee can be credited upon request. Photo shows a new system. We are happy to arrange delivery throughout Europe.

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, Column Lifting Rotating Device with 2-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Movements Load Capacity 2000 kg, 360° Minimum Working Height: 600 mm Maximum Working Height 1500 mm Speed 0.5 rpm Drive Motor Torque 3100 N-m Clamping Plate Diameter 500 mm Rotating Motion 0.55 kW 2 to 10-Ton Capacity Available Upon Request Duob Hcjwihxao Hlzjt

Condition: new, Drilling capacity steel ----- 50 mm Milling capacity steel ----- 25 mm Tube milling capacity ----- 100 mm Longitudinal displacement (X) ----- 590 mm Sideways displacement (Y) ----- 175 mm Height offset (Z) ----- 320 mm Horizontal motor ----- 1.5 KW Vertical motor ----- 2.2 KW Dob Hcsga Twfo Hlzout Horizontal milling spindle ----- 60 ~ 1350 r/min (9) Vertical milling spindle ----- stepless 100-600 / 350-2000 r / min Spindle mounting ----- ISO 40 Table ----- 1000 x 240 mm Weight ----- 1000 KG INCLUDED * DELTA frequency controller * 3-axis digital readout SINO * Automatic longitudinal and transverse feed table * LED lighting * Cooling system * Luxury control box * Tiltable milling head left/right 0-45 degrees * Rotatable work table * Various holders in case

Condition: used, Functionality: fully functional, Technical details: • Manufacturer: Gerhard Müller, Nuremberg • Model: AZMETALL • Machine type: Pillar drilling machine • Speed ranges: 300 / 500 / 850 / 1300 / 2250 rpm (continuously adjustable via belt drive) • Max. drilling diameter: approx. 25-30 mm (depending on the material) • Spindle mount: Morse taper (probably MK2 or MK3) Dueb Hc Hlsv Ex Rtozjt • Drilling depth: approx. 120 mm • Table: Height adjustable and rotatable around the column • Drive: Electric motor with belt drive, 380 V (three-phase current) • Condition: Used, fully functional, ready for immediate use

Condition: good (used), Steel holder, clamping plate with T-slot, wedge holder -Steel holder: wedge holder -Shot size: 50 - 60 x 23 x 100 mm -Dimensions: 175/165/H215 mm Dujb Hc Hjwcxfqolzst -Weight: 12.3 kg

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, 10-ton container turning device, self-centering roller stand 380 V, continuously adjustable speed from 200 to 1200 mm/min. For diameters from 300 mm to 3500 mm Roller diameter 270 mm x 120 mm Temperature resistance of the support rollers: 100°C Dual drive With hand and foot remote control, complete set Digital speed display Dusb Hjg Sz Uroc Hlzet

Condition: used, Year of construction: 1991, Functionality: fully functional, We offer for sale a used hydraulic press from the manufacturer ACM - Inter Hydro (part of the SIF group). Technical data: Duob Hov Exxqec Hlzst • Model: DZ8024 • Year of manufacture: 1991 • Drive: Hydraulic • Equipment: Roller conveyor system for material feed, hydraulic control unit Description: The DZ8024 is a robust hydraulic press, ideal for processing metals and other materials. Thanks to the hydraulic drive, it offers a high pressing force, while the roller conveyor system ensures efficient material feed. The machine is ideal for industrial applications such as the production of metal profiles, cutting or bending. Condition: The press is in working condition. Regular maintenance has been carried out and all relevant documentation is available.

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide -Tool slide: Support slide lower part support carrier -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available -Price: per piece Dujbswcw S Ne Hc Hlzjt -Dimensions: 210/180/H25 mm -Weight: 4 kg/piece

Condition: good (used), load capacity: 2,500 kg, Tehag welding turntable hydraulically height-adjustable, 2.5 tons load capacity Deb Hjt Uzkdec Hlzeut used good condition with hand and foot remote control diameter of the clamping disk 1550mm speed infinitely variable from 0.01 to approx. 1.5 rpm Height horizontal min. 1400mm Height tilted min. 1200mm Height tilted max. 1800mm Travel height adjustment 600mm Length 2600mm Width 1600mm

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier Dusb Hewcwndec Hlzet -Tool carriage: support carriage support carrier -Tool holder: Ø 32 mm -Dimensions: see photos -Dimensions: 460/190/H205 mm -Weight: 21.6 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier Dsb Hc Hlswcwizjzeut -Tool slide: Support slide support carrier with turning tool holder -Clamping height: 40 mm -Dimensions: see photos -Dimensions: 370/180/H170 mm -Weight: 17.8 kg