Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder only for sale per pallet, all holders with capto c6 have been removed, no longer available pallet1 (photo 1 to 4) euro 3220 total 4x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet2 (photo 5 to 8) euro 3130 total 4x driven tools vdi 40 euro 580/pc (1x new) 9x tool holder vdi 40 euro 90/pc Djhx A Eisvpvmtj Ujut pallet3 (photo 9 to 12) euro 3130 total 4x driven tools vdi 40 euro 580/pc (1x new) 9x tool holder vdi 40 euro 90/pc pallet 4 is sold

Condition: good (used), Year of construction: 1999, Used 6 meter guillotine shears from BBM Duehx A Eijwaz Dwe Uot Type: TS H 60 6 capacity: 6100 x 6 mm Year of construction: 1999 NC controlled Pneumatic high holding table

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Dimensions total: 55/55/H42 mm -Total weight: 0.6 kg Dehxjwcc Uij A Ei Ujut

Condition: good (used), Year of construction: 2015, Power: 3.000 Watt Duohx A Eiswav I Rs Uot Type: A04B-0820-B342 Weight of unit: 750 kg Size LxWxH: 205 x 75 x 120 cm Complete with: - Stability unit - Fanuc transformer DTU60/2/0/5S - CNC Controllerunit Fanuc Series 31i-LB

Condition: used, CNC 3D coordinate measuring machine, MORA type Pico 0245.04.05.06 Dehx A Ejrdlrxoi Usut Machine No. Year of manufacture 2005 Measuring range X = 600 mm, Y = 500 mm Measuring height Z-axis 400 mm Machine table = granite slab 1250 x 1200 mm Slab thickness 200 mm Clearance in machine column 720 mm Axis travel speed - setup max. 65 mm/sec. Axis travel speed - rapid traverse max. 250 mm/sec. Mains connection: 400 volts, 50 Hz - Granite worktop with 200 mm threaded grid - RENISHAW PH10T motorized rotary/tilt head with interchangeable TP20 measuring probe - 1 probe head holder with manual adjustment - Various probe heads - Gemodek Microspeed 10 axis control in adjacent control cabinet - Manual control via handheld control panel with joystick and LCD display - Reference sphere on the table - PC for measuring software: Intel Pentium 4, 512 MB RAM, mounted in the machine base - 22-inch TFT monitor - Windows XP operating system - INCA 3D measuring software (license expired) The measuring machine was operated with a rental license and maintenance contract. Measuring machine footprint: W x D x H 1950 x 1800 x 2450 mm Measuring machine weight: 1250 kg Control cabinet weight: 120 kg Very good condition

Condition: used, Year of construction: 1997, Functionality: fully functional, overall weight: 23,000 kg, A Trumpf Trumatic 600L is for sale. Dohxjwgh E Uj A Ei Usut The machine is currently still in production and can be inspected on-site.

Condition: excellent (used), Year of construction: 2007, operating hours: 14,600 h, Functionality: fully functional, Mazak Super Turbo-X 48 laser cutting machine CO2 laser - 1.3kW with associated transformer/cooling group and extraction. Dimensions plate: 2500-1250mm Year of construction 2007 hours: +/-14600 hours Can cut steel up to 12mm, Stainless steel up to 5mm Dohewbghqox A Ei Ujut Aluminum up to 4mm Machine weighs 10 tons +- Machine is currently dismantled. With a deposit, the seller can assemble it and show it working. Additional costs for loading are for the buyer! Video on request.

Condition: ready for operation (used), Year of construction: 2007, Very neat used press brake from Darley Type EHP LS 50 15 12 CL Dehowazyrjx A Ei Ueut Capacity: 1500 x 50 ton Delem DA-65W CNC control (graphic) Y1, Y2, X, R, Z1 and Z2 CNC controlled Hydraulic Wila NS top clamping

Condition: good (used), Year of construction: 2001, CNC 5-axis horizontal machining center with pallet changer Mori Seiki SH8000/5AX Year of construction 2001 Fanuc 16i-MA control system 2-fold pallet changer Pallet size 630 x 630 mm Pallet load max. 1,000 kg X 1,080 mm Y 1,200 mm Z 1,000 mm 4th axis 360° / 0.001° NC rotary axis (table) 5th axis A -100°/+20° NC swivel axis (table) Feed and rapid traverse rates up to 42,000 mm/min. Spindle holder JIS BT 50 Spindle drive power 25/30 kW AC Spindle speeds up to max. 15,000 rpm. 150 tool magazine positions Tool holder MAS BT 50 Tool Ø min. 125 mm / max. 220 mm Tool length max. 500 mm Tool weight max. 30 kg Workpiece Ø 1,000 mm x height 1,000 mm Equipped with: Coolant through the spindle 70 bar Spindle touch sensor Duehx A Eerkpl Uei Uot Scale feedback in X-, Y- and Z-axis Memory 5,120 m Number of programs 1,000 Mold making option Oil separator Coolant tank 1,000 L Chip conveyor Machine weight approx. 25,000 kg Space requirement approx. (LxWxH) approx. 4,280 x 9,450 x 3,925 mm Cutting hours 28216h Offer number MH-6367

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis Dushxeiy Ekvs A Ei Ust - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: used, A Trumpf Trumatic 500 is for sale. The machine is currently still in production and can be tested on-site. Dushewgh Ezjx A Ei Uet

Condition: good (used), Year of construction: 2009, Nette gebruikte kantbank van Darley Dehxowazv To A Ei Uout Type EHP-LS 80.25/20 CL ​​Capaciteit 2550 x 80 ton Y1, Y2, X, R, Z1 en Z2 as CNC gestuurd CNC Bombering Hydraulische Wila NS bovenklemming

Condition: excellent (used), Year of construction: 1998, 4-Axis CNC Horizontal Machining Centre Makino MCB 1210–A120 Year 1998 Fanuc 16MC + Professional 3 Two pallets Pallet size 800 x 800 mm X 1250 mm Y 1050 mm Z 810 mm Spindle taper ISO 50 Spindle drive motor 26 KW AC Spindle speeds 10 – 4500 rpm Number of gear steps 4 automatic steps Spindle torque max. 1066 Nm Tool taper ISO 50 Tool changer Tool magazine positions 120 station Equipped with: B-Axis circular inductosyn measurement system Direct tapping to 2000 rpm (rigid tapping) Chip conveyor High pressure coolant through the spindle 30 bar Coolant filtration unit to 40 µm Tool monitoring system Tool life control Dushxjmt E S Ts A Ei Uet Tool measurement Tool breakage control Renishaw probing system with probe Excellent condition – Inspect under power Top quality machine. High accuracy. Very interesting price. Proposal Number MH-6335

Condition: excellent (used), Year of construction: 2007, 5-Axis Horizontal Machining Centre for complex heavy-duty machining Heller MCH 450 C Year 2007 Siemens Sinumerik 840D Number of pallets: 2 : Twin pallet changer Pallet size: 800 x 1000 mm Pallet load: max. 2500 kg Pallet changing time: 27 sec. NC Rotary table 4th axis : B 360000 x 0.001° NC Tilting milling head 5th axis: C 360000 x 0.001° Traverses: X 1600 mm Y 1200 mm Z 1700 mm Feeds: X/Y/Z 1-40000 mm/min. Rapids: X/Y/Z 40000 mm/min. Spindle taper: ISO 50 DIN 69871 Spindle front bearing ID: 100 mm Spindle drive motor: 28 / 43 (100% / 40% ) KW Spindle speeds: 45 ~ 6.000 rpm Spindle torque: max. 536 / 822 (100% / 40%) Nm Tool taper: ISO 50 DIN 69871 Tool magazine positions: 100 Tool diameter with/without adjacent tools: max. 112 / 228 mm Tool length: max. 600 from spindle nose mm Tool weight: max. 25 kg Chip-to-chip time (H) : approx. 8.2~12.2 sec. Machine weight: approx. t.b.a. kg Machine dimensions: L x W x H t.b.a. mm x mm x mm Equipped with: 5-Axis simultaneous machining 4th axis NC Rotary table 5th Axis NC swivelling milling head Twin pallet changer 100-station tool magazine Linear measurement scales X,Y,Z axes Tool measurement and tool breakage control Coolant through spindle 50 bar Chip conveyor Dshemx U T Aox A Ei Ueut Proposal Number MH-6298

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 400 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 350 mm, rotational speed (max.): 42,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, Primacon PFM 4024 CNC vertical high-precision machining center Year of construction 2016 Heidenhain iTNC 530 CNC control X 400 mm Y 240 mm Z 350 mm Spindle speed max. 42,000 rpm. Tool holder HSK-E40 Dujhxsubd N Ie A Ei Uet 60-position automatic tool changer Offer number MV-6237

Condition: excellent (used), Year of construction: 2018, 5-Axis horizontal machining center with pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Dujhxshuplye A Ei Ust Feeds X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazine. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234

Condition: excellent (used), Year of construction: 2017, 5-Axis Horizontal Machining Centre. MCM Tank 5-Axis. Year 2017. Siemens 840D sl. Dshsgx H A Dox A Ei Ujut 2 x Station Pallet Changer 630 x 800 mm. Pallet load max. 1500 kg. NC-Rotary table. Rotary axis C-Axis 360°/0.001°. NC-Swivelling head (swivelling in Y-Plane). Swivelling axis A-Axis +80°/-95°. X 1300 mm. Y 1400 mm. Z 1400 mm. Rapids X,Y,Z to 50.000 mm/min. Workpiece swing diameter max. 1400 mm. Workpiece height max. 1300 mm. Spindle taper ISO 50. Spindle drive motor rating 40/52 KW. Spindle speeds max. 10000 rpm. Torque at the spindle max. 298/388 Nm. Tool magazine 199 Positions. Tool length max. 470 mm. Linear scales X,Y,Z Axes. Chip conveyor. 4-colour signal lamp Full guarding. Workpiece shower. Tool cone cleaning. Oil skimmer. Temperature compensation for the electro-spindle. Tool monitor. High pressure coolant through the spindle 65 bar. Renishaw probe RMP 60. Tool balanace control. Tool measurement Renishaw NC4. Hydraulic lines to the table for hydraulic clamping of fixtures/workpiece. High Tech Machine in excellent condition.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, travel distance X-axis: 200 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 305 mm, 5-Axis CNC Vertical Machining Centre for Drilling, Tapping, Milling + TURNING BROTHER - Speedio M140X2 New in 2017 Brother C00 Control Table diameter 140 mm 2-Axis NC Rotary Swivelling MILL/TURN table C-Axis 360° A-Axis -120° ~ +20° Duehsvmyxusx A Ei Uet X 200 mm Y 440 mm Z 305 mm Milling spindle Spindle taper BT 30 Spindle drive motor 10.1 / 6.7 KW Spindle speeds to 10000 rpm Turning spindle Spindle drive motor 4.2 KW Spindle speeds to 2000 rpm 22 station tool magazine Said to be in excellent condition Proposal Number MV-6403

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Equipment: chip conveyor, Vertical Machining Centre Hurco VMX42t Year 2007/2008 Hurco Ultimax control with 2 x screens Travels: X 1060 mm. Y 610 mm. Z 610 mm. Spindle: ISO 40. 18 kW. 12,000 rpm. 40 station tool changer Dehx A Eievt Sm Ro Usut Coolant tank Chip conveyor Optional package of tooling can be purchased. Very good condition. Only used for single part machining in special machine builder shop. Inspect under power - Immediately available ! Proposal Number MV-6436

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 10,000 rpm, Vertical 3-axis CNC machining center Quaser MV-204II E Year of construction 2002 Heidenhain TNC426M Drive power axis motors 2,3 / 5 kW X-axis travel 1,020 mm X-axis feed speed 32,000 mm/min. Y-axis travel 600 mm Y-axis feed speed 32,000 mm/min. Z-axis travel 560 mm Z-axis feed speed 32,000 mm/min. Milling table dimensions 635 x 1,200 mm Milling table load capacity 1,000 kg Milling table configuration 6 x 18 mm H 8 T-slots Milling spindle Speed 10,300 1/min. Milling spindle torque 252 Nm Drive power 39 kW Tool holder BT40 24-position tool magazine Drive power cooling 3 kW (20 bar) Lubricant tank volume 4L Coolant tank volume 400L Equipped with: Fully encapsulated work area with roof Chip conveyor Central oil lubrication 3D measuring probe Electric handwheel Height 2,825 mm Width 2,650 mm Length 2,200 mm Weight 7,500 kg Machine comes from the test laboratory of a marine gearbox manufacturer and has not been a production machine, therefore few operating hours! Dujhx Ajrhlbas Ei Uot Offer number MV-6366

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Vertical 5-axis machining centers - Milling/turning centers Stama MC726/MT - Milling/Turning - from solid material Year of construction 2008 Siemens Sinumerik 840D sl CNC 2-axis NC turning/tilting table with collet chuck Clamping capacity 15 ~ 80 mm diameter C-axis 360° A-axis 120° X 500 mm Dshjt Am R Sex A Ei Uout Y 380 mm Z 360 mm 42-position automatic tool changer turning spindle 20/50 kW / 4,000 rpm Milling spindle 17/37 kW / 10,500 rpm 2 x machines available as machining cell or individual machine sales Equipped with a Promot gantry loader and parts conveyor There are 2 x machines available. They are currently connected in a production line. Both machines have their own chip conveyor, but only one coolant tank with different coolant pumps. Under power in the factory. Both machines are well maintained and in perfect condition. Regular maintenance carried out by Stama until 2021, since then only low utilization. ALSO AVAILABLE AS SINGLE MACHINE ! Offer reference MV-6363 + Offer reference MV-6389

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, 5-Axis CNC HSC Vertical Machining Centre with Pallet pool OPS Ingersoll Speed Hawk 650 Year 2009 Andronic 2060 control Proposal Number MV-6444 Pallet size 320 x 320 mm X 550 mm Y 700 mm Z 450 mm 4th axis table rotation axis C 360° 5th axis table swivel axis A -120°/+60° 56 tool magazine positions 36000 rpm. Dushjvy H Hrex A Ei Uot Equipped with: Pallet pool with 5 EROWA pallets 320 x 320 mm. Fischer HF spindle. Glass scales in X,Y,Z …and much more Proposal reference MV-6444

Condition: excellent (used), Year of construction: 2001, Vertical 3-axis machining center Okuma MX45VAE Dujhxoh Eyr Ej A Ei Ujt Year 2001 OSP U100M CNC control Table size 1000 x 430 mm X 762mm Y 460mm Z 450 mm Spindle taper BT 40 Spindle speeds up to 7000 rpm. 20 station tool changer New spindle and spindle drive motor in 2019 ! Proposal Number MV-6245

Condition: excellent (used), Year of construction: 2014, CNC vertical 5-axis machining center with 6-fold pallet station Hermle C 42 U Year of construction 2014 Heidenhain iTNC 530 CNC 2-axis NC swivel rotary table: Table rotary axis C-axis 360° Table swivel axis A-axis +130°/-130° Duohx A Eijrpmcao Uet Number of pallets in the system: 6 Pallet clamping surface 400 x 400 mm Pallet load max. 450 kg Longitudinal travel: X 800 mm Transverse travel: Y 800 mm Vertical travel Z 550 mm Rapid traverse up to: X/Y/Z 45,000 mm/min. C 65 rpm. A 25 rpm. Spindle drive power: 10/20 kW AC Spindle speeds: 20 - 18,000 rpm. Spindle torque max. 180 Nm Tool magazine positions: max. 85 (42 ATC + 43 additional magazine) Tool holder: HSK-A63 Tool Ø with/without adjacent tools: max. 90/125 mm Tool length: max. 300 mm Tool weight: max. 8 kg Chip-to-chip time: 4.5 sec. Accessories: 5-axis machining with 2-axis NC swivel rotary table. Pallet station 6-fold with automatic pallet changer. 85-position tool magazine with automatic tool changer. Full enclosure. Coolant device. High pressure spindle internal cooling IKZ 80 bar. Paper belt filter. BLUM laser tool measurement and tool breakage control. Measuring probe. Direct measuring systems X,Y,Z. Chip conveyor. Very well maintained machine - keeps good tolerances Spindle was replaced with a new spindle in 2019. The new spindle has very low running hours. Offer number MV-6375

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Siemens, controller model: 840D, CNC 5-axis vertical machining center with bar machining Stama MC 531/SM Dynamic Power Year of construction 1999 / overhauled in 2017 Siemens 840D control 2-axis NC swivel rotary table: Table diameter: 210 mm Table load: n/v kg Table with spindle nose: ASA 8 Table spindle bar capacity: 20 ~ 80 mm Ø Bar length: max. 800 mm Longitudinal table travel: X 800 mm Transverse spindle travel: Y 400 mm Spindle vertical travel: Z 350 mm Table rotation axis 4e axis (continuous): B-axis 360°/0.001° Table swivel axis 5e axis (continuous): A-axis 105°/0.001° Distance spindle - table: min./max. 265 / 615 mm Cutting feeds: X/Y/Z 1 - 10,000 mm/min. Rapid feeds up to: X/Y/Z 45,000 mm/min. Spindle holder: HSK-A63 Spindle drive power: 14/21 kW AC Spindle speeds: 36 - 9,000 rpm. Spindle torque: max. 70 Nm Tool magazine positions: 78-position automatic tool changer Tool holder: HSK-A63 Tool diameter with/without adjacent tools: max. 125 mm Tool length: max. 250 mm Tool weight: max. 12 kg Tool change time: 2.4 sec. Dshx A Eiothflas Uout Chip-to-chip time: 3 sec. Milling capacity: max. 350 cm³/min. Drilling capacity Ø: max. 40 mm Tapping capacity Ø: max. M 27 Machine weight: approx. 7,200 kg Machine size (not footprint): L x W x H 3,000 x 4,050 x 2,930 mm Accessories: 2-axis NC rotary swivel table. Table as work support for bars up to 80 mm Ø. Max. Bar length 800 mm. Hainbuch gripper (quick connection) diameter 180 mm. Short bar loading magazine. Chip conveyor. Milling spindle Internal coolant supply 70 bar with magnetic filter. BLUM laser tool measurement. Tool holder. Hydraulic tailstock. KNOLL paper filter system. Replacement gripper for the table. Channels for the bar feeder. Overhauled in 2017 including new main spindle Offer number MV-6173