Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 53 mm, clearance between the columns: 530 mm, displacement volume: 518 cm³, injection pressure: 1,830 bar, injection weight: 477 g, mold height (min.): 180 mm, ejector force: 62 N, ejector stroke: 150 mm, plate width: 700 mm, plate height: 700 mm, total length: 5,800 mm, total width: 1,450 mm, total height: 1,800 mm, overall weight: 5,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 201 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A6-IU945 D=53 Servo-hydraulic with electric screw drive Clamping force 160T Tie bar spacing 530x530 Tool installation height 180 to 650 Robot interfaces Euromap 67, Euromap 18 Suitable 12kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: 3 × 400 V + N + PE / 50 Hz Germany – CE standard Knedpozz Sw Ijfx Anxjb KEBA 2985 control system Standard screw and cylinder unit PID control of the nozzle Thermal insulation cover for the cylinder Closed cooling circuit for the cylinder’s feed zone 1 air blow-off unit on the fixed mold plate EU67 robot interface Centering ring on the fixed mold plate EU2 ejector bore 1 additional 32-A socket Plasticizing interface Cooling circuit of the heat exchanger controlled via solenoid valve Tool thickness increased by 100 mm Moving mold plate with 2 hydraulic core pulls, each with pressure relief Fixed mold plate with 2 hydraulic core pulls, each with pressure relief EUROMAP-13 core pull interface on the fixed mold plate EUROMAP-13 core pull interface on the moving mold plate Oil preheating Additionally 6 DI/DO signals as reserve (KEBA) Free programming (KEBA)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection Knedpfxezzn Hle Anxeb · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 48 mm, clearance between the columns: 460 mm, displacement volume: 371 cm³, injection pressure: 1,630 bar, injection weight: 341 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,250 mm, total height: 1,800 mm, overall weight: 5,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN160A5-IU604 D=48 Clamping force: 160T Kedpjzz Spdsfx Anxenb Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Basic standard equipment Suitable 12 kg linear robot available upon request. Optional equipment: CE standard Quick-change version of the plasticizing unit with Harting interface 1 set of core pull Dosing signal interface with HAN-3A connector KEBA 1000 1 set with 6 glass flow meters EU67

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 60 mm, clearance between the columns: 730 mm, displacement volume: 664 cm³, injection pressure: 151 bar, injection weight: 611 g, ejector force: 99 N, ejector stroke: 200 mm, plate width: 1,060 mm, plate height: 1,060 mm, total length: 8,100 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 17,300 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 180 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: P350H IU1610 D=60 High-performance packaging machine for thin-walled packaging Clamping force: 350 tons Tie bar spacing: 730 x 730 Tool installation height: 350 to 750 Warranty can be optionally extended to 24 or 36 months. Standard options: see brochure Special options: Germany – CE standard 3 × 400 V + N + PE / 50 Hz Screw diameter: 60 mm, L/D ratio 24:1 Ejector stroke increased to 220 mm Ejector, as well as tool opening and closing, with high-performance proportional valve 1 set of hydraulically synchronized core pull head plate with high-speed proportional valve Linear guides for the clamping unit Servo injection up to 1,000 mm/s Electric plasticizing motor Ceramic heater OPC-UA interface Kjdpfx Anezz Sikjxonb KEBA 2985 control system 2 additional sockets: 1 × 16 A 1 × 32 A Water distributor with 10 inlet and 10 outlet connections for movable and fixed clamping plates Energy meter Electric dosing

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 43 mm, clearance between the columns: 460 mm, displacement volume: 452 cm³, injection pressure: 1,340 bar, injection weight: 416 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,400 mm, total height: 1,850 mm, overall weight: 4,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN120A5-IU604 D=43 Knodpfx Aszz Smcjnxjb Clamping force: 120T Tie bar spacing: 460x460 Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Suitable 6kg or 12kg linear robot available upon request. Basic standard equipment: see brochure. Optional equipment: Water connections: 6 for fixed platens, 6 for movable platens 3 core pulls: 2 on movable platen and 1 on fixed platen 1x Harting connector for the core pull Ejector safety interface 6x cascade 1x valve connector 2x 16A sockets 1x 25A socket

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 530 mm, displacement volume: 159 cm³, injection pressure: 2,000 bar, injection weight: 146 g, mold height (min.): 175 mm, ejector force: 40 N, ejector stroke: 125 mm, plate width: 775 mm, plate height: 775 mm, total length: 5,450 mm, total width: 1,550 mm, total height: 1,950 mm, overall weight: 5,850 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF160 IU320 D=35 Fully electric SGM – ejector, nozzle system, core pulls are servo-hydraulic Clamping force 160T Tie bar spacing 530x530 Tool installation height 175 to 620 Robot interfaces Euromap 18 and Euromap 67 Warranty can optionally be extended to 24 or 36 months. Knsdpfx Anezz Sp Roxjb Suitable 12 kg linear robot available upon request. Basic standard equipment, see brochure. Optional equipment: CE standard Hybrid machine Maximum tool height increased by 100 mm Bimetal screw and cylinder unit, version B Interface for conveyor belt Quick-change version of the plasticizing unit with Harting interface 2 additional hydraulic core pulls with end switch monitoring 2 air blow-off units, permanently mounted on the fixed platen Dosing signal interface with HAN-3A connector, plus 1 additional 220 V / 10 A Schuko socket 20 mA interface for mold temperature controller 1 set of 4 × 2 water manifolds on the back of each platen with 3/8" connection 2 sets of water manifolds, each with 4 lines Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable inputs/outputs Centering rings on both platens according to Euromap 18/67

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, clearance between the columns: 720 mm, displacement volume: 834 cm³, injection pressure: 2,310 bar, injection weight: 767 g, mold height (min.): 250 mm, ejector force: 55 N, ejector stroke: 150 mm, plate width: 970 mm, plate height: 970 mm, total length: 7,150 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 12,900 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF300 IU1930 D=60 Knsdpfozz Stpjx Anxeb Fully electric injection molding machine. Ejector, nozzle system, and core pulls are servo-hydraulically controlled. Clamping force: 300T Tie bar spacing: 720x720 Tool installation height: 250 to 650 Robot interfaces: Euromap 67, Euromap 18 Warranty can optionally be extended to 24 or 36 months. Suitable linear robot available upon request. Standard equipment: see brochure. Optional equipment: CE standard Hybrid machine KEBA 8000 control system PID control of the nozzle.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 40 mm, clearance between the columns: 310 mm, displacement volume: 207 cm³, injection pressure: 142 bar, injection weight: 191 g, mold height (min.): 120 mm, ejector force: 22 N, ejector stroke: 60 mm, plate width: 470 mm, plate height: 470 mm, total length: 4,437 mm, total width: 1,418 mm, total height: 1,560 mm, overall weight: 2,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 95 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN60A5-IU295 D=40 Clamping force: 60T Tie bar spacing: 310x310 Tool installation height: 120 to 330 Ksdjzzz N Topfx Anxsnb Robot interfaces: Euromap 18 and Euromap 67 Basic standard equipment A suitable 6 kg linear robot is available upon request.

Condition: used, Year of construction: 1996, Manufacturer: Vulcanic Knjdpfx Ajx R A A Nsnxeb Model: Vulcatherm Catalogue number: 829721-01 Type: Temperature controller Date: 1996   Weight: 210 kg Max. pressure: 10 bar G Max. temperature: 90 °C Thermal fluid: water  

Condition: used, Year of construction: 2007, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Knedpfxszg Nbhe Anxsb Documentation available Sold with protective cover.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,054 h, clamping force: 2,200 kN, screw diameter: 55 mm, Electrical injection moulding machine manufactured in 2019. This YEAR-CHANCE YC-C 220S features a clamping force of 2,200 kN and a maximum injection volume of 546 cm³. It is equipped with a screw diameter of 55 mm and a maximum injection pressure of 1,797 Bar. If you are looking to get high-quality injection moulding capabilities, consider the YEAR-CHANCE YC-C 220S machine we have for sale. Contact us for further details. • Space between columns (tie-bar spacing): 510 x 510 mm • Maximum mold height: 600 mm Kodpfx Aoz Danwjnxonb • Minimum mold height: 150 mm • Maximum injection volume: 546 cm³ • Maximum injection pressure: 1,797 bar • Centering ring: 100 mm • Core pullers: 2 • Pneumatic valves: 2

Condition: ready for operation (used), Year of construction: 2006, clamping force: 2,500 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2006. This Arburg Allrounder 630S-2500-800/350 features a clamping force of 2,500 kN and a maximum mold height of 900 mm. It includes a screw diameter of 45/35 mm and a maximum injection volume of 195/140 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 630S-2500-800/350 machine we have for sale. Contact us for further details. Kjdpoz Dal Ajfx Anxsnb • Tie-bar spacing (space between columns): 630 x 630 mm • Maximum mold height: 900 mm • Minimum mold height: 300 mm • Maximum injection volume: 195 / 140 cm³ (for 45 / 35 mm screw) • Maximum injection pressure: 2,470 bar • Centering ring: 160 mm • Hot runner control: 3 zones • Core puller: 1 Additional equipment • Robot: Arburg Multilift H • 2x Moretto electric loader, Safety cage, Conveyor belt, Rotary table • 2x dryers with intake ducts are available for extra 1000€

Condition: ready for operation (used), Year of construction: 2020, operating hours: 17,928 h, clamping force: 900 kN, screw diameter: 32 mm, Electrical injection moulding machine manufactured in 2020. This ZHAFIR ZERES ZE900/210B features a clamping force of 900 kN and a maximum injection pressure of 2,000 Bar. It has a screw diameter of 32 mm and accommodates molds with a maximum height of 410 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES ZE900/210B machine we have for sale. Contact us for further details. • Space between columns: 420 x 370 mm • Maximum mold height: 410 mm • Minimum mold height: 150 mm Knjdpfx Ansz Dahkexob • Maximum injection volume: 100 cm³ • Maximum injection pressure: 2000 bar • Centering ring: 125 mm • Core pullers: 2 • Pneumatic valves: 1 Additional equipment • Robot: Hilectro V-800 IS (YOM: 2023)

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG75/D K/RT50 Pressurized water temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial applications in plastics processing, especially for the temperature control of injection molds and other process tools. Manufacturer's serial number: 102010170001, Year of manufacture: 2009 Temperature: max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 100 l/min Tank volume: 2.8 liters (internal filling volume) Knsdsz Au Hbopfx Anxjb Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooling unit) Pump motor power: 1.5 kW Continuous sound pressure level

Condition: new, Year of construction: 2023, Coperion ZSK 27 MV Plus extrusion line. Application: Pet food and dental sticks. Year: 2023, never used, still in its original packaging. Kodpjxr Hgxjfx Anxjnb

Condition: ready for operation (used), Year of construction: 2015, operating hours: 68,387 h, clamping force: 13,000 kN, screw diameter: 105 mm, injection weight: 4,779 g, total width: 3,650 mm, total height: 2,820 mm, overall weight: 70,000 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC6 version 1.4, product length (max.): 13,650 mm, Hydraulic injection moulding machine manufactured in 2015. This KraussMaffei 1300-12000 MX features a clamping force of 13,000 kN and platen dimensions of 2210 x 1910 mm. The injection unit has a screw diameter of 105 mm and a shot volume of 5195 cm³. If you are looking to get high-quality injection moulding capabilities, consider the KraussMaffei 1300-12000 MX machine we have for sale. Contact us for further details. Clamping unit • Platen dimensions: 2210 x 1910 mm • Distance between tie bars: 1570 x 1270 mm • Min. mould height: 700 mm • Max. mould height: 1400 mm • Max. opening width: 3050 mmInjection unit • Injection unit: SP 12000 • Shot volume: 5195 cm³ • Max. injection pressure: 2296 barElectrical and hydraulic • Pump motor power: 132 kW • Heating power: 75 kW • Power supply: 400 V, 3-phase, 50 HzOperating data • Power-on hours: 70003 h 29 min • Production operating hours: 68387 h 27 min • Total cycles: 5,472,772 Additional equipment Knjdpfx Aez Az Iisnxjb • KraussMaffei LRX 350 linear robot • Material hopper / feeding equipment • Safety guarding around mould and robot area

Condition: ready for operation (used), Year of construction: 2018, operating hours: 54,823 h, clamping force: 7,000 kN, screw diameter: 80 mm, injection weight: 1,916 g, total width: 2,780 mm, total height: 2,320 mm, overall weight: 20,000 kg, controller manufacturer: ENGEL, controller model: CC300, product length (max.): 8,200 mm, Hydraulic injection moulding machine manufactured in 2018. This ENGEL duo 5160/700 features a clamping force of 7000 kN and platen dimensions of 1510 x 1440 mm. The machine includes a screw diameter of 80 mm and a shot volume of 2061 cm³. If you are looking to get high-quality injection moulding capabilities, consider the ENGEL duo 5160/700 machine we have for sale. Contact us for further details. • Operating hours: 54,823 h • Clamping unit: • Platen dimensions: 1,510 x 1,440 mm • Distance between tie bars: 1,000 x 960 mm • Min. mould height: 450 mm • Max. mould height: 950 mm • Max. opening width: 1,850 mm • Injection unit: • Injection unit size: 5160 • Shot volume: 2,061 cm³ • Max. injection pressure: 2,300 bar • Electrical and hydraulic: • Hydraulic pump motor power: 109 kW • Heating power: 40.7 kW Knodoz Az Erspfx Anxsb

Year of construction: 2006, condition: ready for operation (used), screw diameter: 130 mm, Single-screw extruder manufactured in 2005. This TECNOVA ES130/37D DEG features a screw diameter of Ø 130 mm and an L/D ratio of 37:1. It includes a powerful main motor rated at 246 HP and a degassing system for enhanced processing. The barrel temperature control offers individually controlled heating and cooling zones, ensuring optimal performance. If you are looking to get high-quality plastic processing capabilities, consider the TECNOVA ES130/37D DEG machine we have for sale. Contact us for further details. • L/D ratio: 37:1* • Main motor power: 246 HP (approx. 181 kW) • Degassing system: Yes • Barrel temperature control: Individually controlled heating and cooling zones • Barrel cooling: Forced-air cooling with fans • Barrel heating capacity: approx. 110.6 kW total • Electrical supply: 380 V / 50 Hz / 3-phase • Main electrical rating: 630 A • Control voltage: 110 V • Electrical cabinet protection: IP44 • Extruder length: approx. 4,635 mm Additional equipment Knodpfx Asz Az Acjnxob • Vacuum pump (included)

Year of construction: 2014, condition: excellent (used), ANKELE 2 BAND CATERPILLAR BAP 375-70 1A Knedpfx Anou Skmwsxob

Condition: used, functionality: fully functional, Year of construction: 2018, screw conveyor diameter: 52 mm, Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder (2018) comprising Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder with 2x 52.2 mm diameter screws Knsdpfsz Atiusx Anxeb 48:1 L/D ratio, co-rotating 12-barrel housing section, electrically heated and water-cooled Side feeder 1200rpm max.imum screw speed 350kW motor with Eisenbeiss ZE-042.5-16.0 gearbox

Condition: good (used), Year of construction: 2008, machine/vehicle number: 3514, functionality: fully functional, power: 25 kW (33.99 HP), input voltage: 400 V, total length: 5,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 3,000 kg, KOCH CKT-300 Granulate Drying System - including piping and 6 associated containers Important: The item must be picked up on a fixed date between September 1st and September 3rd, 2026; the exact date will be determined later. FCA D-73235 Weilheim Teck – loaded onto a truck. Knedszvl H Sepfx Anxob

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Passage height: appr. max. 200 mm Effective contact length: 2400 mm Haul-off speed: stage 1: 0,5 - 4,0 m/min., stage 2: 1,0 - 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Kjdpfjz Ark Rox Anxonb Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: used, functionality: unexamined, Pair of screws for extruder Weber DS-63, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 63 Serial no.: 063.008271.r.1004 Knedpfx Aszrt Enjnxsb Screw diameter: 2 x 63 mm Screw length: 17 x D Condition: used

Condition: good (used), Year of construction: 2003, operating hours: 67,092 h, functionality: fully functional, clamping force: 10,000 kN, screw diameter: 120 mm, displacement volume: 5,655 cm³, plate length: 1,690 mm, plate height: 1,960 mm, total length: 11,600 mm, total width: 2,900 mm, total height: 2,500 mm, overall weight: 76,500 kg, BATTENFELD HM 10000-9200 Stock No.: 503007 Manufacturer: Wittmann Battenfeld Type: HM 10000-9200 Control System: UNILOG B4 Year of Manufacture: 2003 Operating Hours: 67092 h Technical Data, Clamping Unit Clamping Force: 10000 kN Tie Bar Spacing, horizontal x vertical: 1120 x 1400 mm Platen Size, horizontal x vertical: 1960 x 1690 mm Minimum Mold Height: 550 mm Knjdpfx Aoz Dgdxjnxob Maximum Mold Height: 1020 mm Maximum Mold Opening: 2120 mm Opening Stroke: 1100 mm Ejector Stroke: 300 mm Ejector Force: 118 kN Centering of Moving Platen, diameter: 250 mm Centering of Fixed Platen, diameter: 315 mm Technical Data, Injection Unit Screw Diameter: 120 mm Displacement: 5655 ccm Injection Pressure: 1632 bar Screw Length: 22 l/d Screw Stroke: 500 mm Screw Speed: 130 rpm Screw Torque: 11370 N Plasticizing Rate: 144 g/s PS Free Injection Rate: 1144 g/s PS Number of Heating Zones: 8 Nozzle Distance: 700 mm Dimensions & Weight Machine Dimensions LxWxH: 11.6m x 2.9m x 2.5m Total Weight: 76500 KG Equipment Screen text in German Compact-Flash drive Hydraulic core pull, 4x Leveling elements EUROMAP 12 interface Interface for temperature control unit Extended oil cooler Tool heating, 16x

Condition: good (used), Year of construction: 2004, operating hours: 76,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, plate length: 1,200 mm, plate height: 1,270 mm, total length: 9,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, KRAUSS MAFFEI KM 420-1900/55 CZ Multinject Stock No.: 503534 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control System: MC 4 Year of Manufacture: 2004 Operating Hours: 76,000 h Technical Data – Clamping Unit Clamping Force: 4200 kN Tie Bar Spacing h x v: 800 x 800 mm Platen Size h x v: 1270 x 1200 mm Minimum Mold Height: 380 mm Maximum Mold Height: 1400 mm Opening Stroke: 1020 mm Ejector Stroke: 250 mm Ejector Force: 95 kN Centering of Moving Platen D: 200 mm Centering of Fixed Platen D: 200 mm Tool Weight: 6700 kg Technical Data – Injection Unit Screw Diameter: 70 mm Injection Volume: 1047 ccm Injection Pressure: 1778 bar Screw Length: 20 l/d Screw Speed: 527 rpm Plasticizing Rate: 95 g/s PS Free Injection Rate: 953 g/s PS Number of Heating Zones: 6 Dimensions & Weight Machine Dimensions L x W x H: 9.83 m x 2.33 m x 2.48 m Total Weight: 23090 kg Equipment Screen Text in German Hydraulic Core Pull 6x Machine without Handling System Machine without Material Hopper Leveling Elements Tool Heating 16x Two-Component Injection Molding Machine Knodpfx Ansz Dgc Ijxeb